🚨 CVE-2024-46841
In the Linux kernel, the following vulnerability has been resolved:

btrfs: don't BUG_ON on ENOMEM from btrfs_lookup_extent_info() in walk_down_proc()

We handle errors here properly, ENOMEM isn't fatal, return the error.

🎖@cveNotify

🚨 CVE-2024-46842
In the Linux kernel, the following vulnerability has been resolved:

scsi: lpfc: Handle mailbox timeouts in lpfc_get_sfp_info

The MBX_TIMEOUT return code is not handled in lpfc_get_sfp_info and the
routine unconditionally frees submitted mailbox commands regardless of
return status. The issue is that for MBX_TIMEOUT cases, when firmware
returns SFP information at a later time, that same mailbox memory region
references previously freed memory in its cmpl routine.

Fix by adding checks for the MBX_TIMEOUT return code. During mailbox
resource cleanup, check the mbox flag to make sure that the wait did not
timeout. If the MBOX_WAKE flag is not set, then do not free the resources
because it will be freed when firmware completes the mailbox at a later
time in its cmpl routine.

Also, increase the timeout from 30 to 60 seconds to accommodate boot
scripts requiring longer timeouts.

🎖@cveNotify

🚨 CVE-2024-46843
In the Linux kernel, the following vulnerability has been resolved:

scsi: ufs: core: Remove SCSI host only if added

If host tries to remove ufshcd driver from a UFS device it would cause a
kernel panic if ufshcd_async_scan fails during ufshcd_probe_hba before
adding a SCSI host with scsi_add_host and MCQ is enabled since SCSI host
has been defered after MCQ configuration introduced by commit 0cab4023ec7b
("scsi: ufs: core: Defer adding host to SCSI if MCQ is supported").

To guarantee that SCSI host is removed only if it has been added, set the
scsi_host_added flag to true after adding a SCSI host and check whether it
is set or not before removing it.

🎖@cveNotify

🚨 CVE-2024-46846
In the Linux kernel, the following vulnerability has been resolved:

spi: rockchip: Resolve unbalanced runtime PM / system PM handling

Commit e882575efc77 ("spi: rockchip: Suspend and resume the bus during
NOIRQ_SYSTEM_SLEEP_PM ops") stopped respecting runtime PM status and
simply disabled clocks unconditionally when suspending the system. This
causes problems when the device is already runtime suspended when we go
to sleep -- in which case we double-disable clocks and produce a
WARNing.

Switch back to pm_runtime_force_{suspend,resume}(), because that still
seems like the right thing to do, and the aforementioned commit makes no
explanation why it stopped using it.

Also, refactor some of the resume() error handling, because it's not
actually a good idea to re-disable clocks on failure.

🎖@cveNotify

🚨 CVE-2024-20498
Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device.

These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established.
Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

🎖@cveNotify

🚨 CVE-2024-20499
Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device.

These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established.
Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

🎖@cveNotify

🚨 CVE-2024-20500
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device.

This vulnerability is due to insufficient resource management when establishing TLS/SSL sessions. An attacker could exploit this vulnerability by sending a series of crafted TLS/SSL messages to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted.
Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

🎖@cveNotify

🚨 CVE-2024-20501
Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device.

These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established.
Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

🎖@cveNotify

🚨 CVE-2024-37868
File Upload vulnerability in Itsourcecode Online Discussion Forum Project v.1.0 allows a remote attacker to execute arbitrary code via the "sendreply.php" file, and the uploaded file was received using the "$- FILES" variable.

🎖@cveNotify

🚨 CVE-2024-37869
File Upload vulnerability in Itsourcecode Online Discussion Forum Project v.1.0 allows a remote attacker to execute arbitrary code via the "poster.php" file, and the uploaded file was received using the "$- FILES" variable

🎖@cveNotify

🚨 CVE-2023-5825
An issue has been discovered in GitLab CE/EE affecting all versions starting from 16.2 before 16.3.6, all versions starting from 16.4 before 16.4.2, all versions starting from 16.5 before 16.5.1. A low-privileged attacker can point a CI/CD Component to an incorrect path and cause the server to exhaust all available memory through an infinite loop and cause Denial of Service.

🎖@cveNotify

🚨 CVE-2024-0208
GVCP dissector crash in Wireshark 4.2.0, 4.0.0 to 4.0.11, and 3.6.0 to 3.6.19 allows denial of service via packet injection or crafted capture file

🎖@cveNotify

🚨 CVE-2024-0211
DOCSIS dissector crash in Wireshark 4.2.0 allows denial of service via packet injection or crafted capture file

🎖@cveNotify

🚨 CVE-2023-6955
A missing authorization check vulnerability exists in GitLab Remote Development affecting all versions prior to 16.5.6, 16.6 prior to 16.6.4 and 16.7 prior to 16.7.2. This condition allows an attacker to create a workspace in one group that is associated with an agent from another group.

🎖@cveNotify

🚨 CVE-2023-6736
An issue has been discovered in GitLab EE affecting all versions starting from 11.3 before 16.7.6, all versions starting from 16.8 before 16.8.3, all versions starting from 16.9 before 16.9.1. It was possible for an attacker to cause a client-side denial of service using malicious crafted content in the CODEOWNERS file.

🎖@cveNotify

🚨 CVE-2024-8800
The RabbitLoader – Website Speed Optimization for improving Core Web Vital metrics with Cache, Image Optimization, and more plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 2.21.0. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

🎖@cveNotify

🚨 CVE-2023-1534
Out of bounds read in ANGLE in Google Chrome prior to 111.0.5563.110 allowed a remote attacker who had compromised the renderer process to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

🎖@cveNotify

🚨 CVE-2023-1810
Heap buffer overflow in Visuals in Google Chrome prior to 112.0.5615.49 allowed a remote attacker who had compromised the renderer process to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

🎖@cveNotify

🚨 CVE-2023-1811
Use after free in Frames in Google Chrome prior to 112.0.5615.49 allowed a remote attacker who convinced a user to engage in specific UI interaction to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

🎖@cveNotify

🚨 CVE-2023-1812
Out of bounds memory access in DOM Bindings in Google Chrome prior to 112.0.5615.49 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: Medium)

🎖@cveNotify

🚨 CVE-2023-0921
A lack of length validation in GitLab CE/EE affecting all versions from 8.3 before 15.10.8, 15.11 before 15.11.7, and 16.0 before 16.0.2 allows an authenticated attacker to create a large Issue description via GraphQL which, when repeatedly requested, saturates CPU usage.

🎖@cveNotify