🚨 CVE-2021-0221
In an EVPN/VXLAN scenario, if an IRB interface with a virtual gateway address (VGA) is configured on a PE, a traffic loop may occur upon receipt of specific IP multicast traffic. The traffic loop will cause interface traffic to increase abnormally, ultimately leading to a Denial of Service (DoS) in packet processing. The following command could be used to monitor the interface traffic: user@junos> monitor interface traffic Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 6492089274364 (70994959) 6492089235319 (70994956) et-0/0/25 Up 343458103 (1) 156844 (0) ae0 Up 9132519197257 (70994959) 9132519139454 (70994956) This issue affects Juniper Networks Junos OS on QFX Series: all versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.
🎖@cveNotify
In an EVPN/VXLAN scenario, if an IRB interface with a virtual gateway address (VGA) is configured on a PE, a traffic loop may occur upon receipt of specific IP multicast traffic. The traffic loop will cause interface traffic to increase abnormally, ultimately leading to a Denial of Service (DoS) in packet processing. The following command could be used to monitor the interface traffic: user@junos> monitor interface traffic Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 6492089274364 (70994959) 6492089235319 (70994956) et-0/0/25 Up 343458103 (1) 156844 (0) ae0 Up 9132519197257 (70994959) 9132519139454 (70994956) This issue affects Juniper Networks Junos OS on QFX Series: all versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.
🎖@cveNotify
🚨 CVE-2020-25557
In CMSuno 1.6.2, an attacker can inject malicious PHP code as a "username" while changing his/her username & password. After that, when attacker logs in to the application, attacker's code will be run. As a result of this vulnerability, authenticated user can run command on the server.
🎖@cveNotify
In CMSuno 1.6.2, an attacker can inject malicious PHP code as a "username" while changing his/her username & password. After that, when attacker logs in to the application, attacker's code will be run. As a result of this vulnerability, authenticated user can run command on the server.
🎖@cveNotify
Packetstormsecurity
CMSUno 1.6.2 Remote Code Execution ≈ Packet Storm
Information Security Services, News, Files, Tools, Exploits, Advisories and Whitepapers
🚨 CVE-2020-25538
An authenticated attacker can inject malicious code into "lang" parameter in /uno/central.php file in CMSuno 1.6.2 and run this PHP code in the web page. In this way, attacker can takeover the control of the server.
🎖@cveNotify
An authenticated attacker can inject malicious code into "lang" parameter in /uno/central.php file in CMSuno 1.6.2 and run this PHP code in the web page. In this way, attacker can takeover the control of the server.
🎖@cveNotify
Packetstormsecurity
CMSUno 1.6.2 Remote Code Execution ≈ Packet Storm
Information Security Services, News, Files, Tools, Exploits, Advisories and Whitepapers
🚨 CVE-2020-25824
Telegram Desktop through 2.4.3 does not require passcode entry upon pushing the Export key within the Export Telegram Data wizard. The threat model is a victim who has voluntarily opened Export Wizard but is then distracted. An attacker then approaches the unattended desktop and pushes the Export key. This attacker may consequently gain access to all chat conversation and media files.
🎖@cveNotify
Telegram Desktop through 2.4.3 does not require passcode entry upon pushing the Export key within the Export Telegram Data wizard. The threat model is a victim who has voluntarily opened Export Wizard but is then distracted. An attacker then approaches the unattended desktop and pushes the Export key. This attacker may consequently gain access to all chat conversation and media files.
🎖@cveNotify
GitHub
soheilsamanabadi/vulnerability
Contribute to soheilsamanabadi/vulnerability development by creating an account on GitHub.
🚨 CVE-2020-26934
phpMyAdmin before 4.9.6 and 5.x before 5.0.3 allows XSS through the transformation feature via a crafted link.
🎖@cveNotify
phpMyAdmin before 4.9.6 and 5.x before 5.0.3 allows XSS through the transformation feature via a crafted link.
🎖@cveNotify
🚨 CVE-2020-26935
An issue was discovered in SearchController in phpMyAdmin before 4.9.6 and 5.x before 5.0.3. A SQL injection vulnerability was discovered in how phpMyAdmin processes SQL statements in the search feature. An attacker could use this flaw to inject malicious SQL in to a query.
🎖@cveNotify
An issue was discovered in SearchController in phpMyAdmin before 4.9.6 and 5.x before 5.0.3. A SQL injection vulnerability was discovered in how phpMyAdmin processes SQL statements in the search feature. An attacker could use this flaw to inject malicious SQL in to a query.
🎖@cveNotify
🚨 CVE-2019-14904
A flaw was found in the solaris_zone module from the Ansible Community modules. When setting the name for the zone on the Solaris host, the zone name is checked by listing the process with the 'ps' bare command on the remote machine. An attacker could take advantage of this flaw by crafting the name of the zone and executing arbitrary commands in the remote host. Ansible Engine 2.7.15, 2.8.7, and 2.9.2 as well as previous versions are affected.
🎖@cveNotify
A flaw was found in the solaris_zone module from the Ansible Community modules. When setting the name for the zone on the Solaris host, the zone name is checked by listing the process with the 'ps' bare command on the remote machine. An attacker could take advantage of this flaw by crafting the name of the zone and executing arbitrary commands in the remote host. Ansible Engine 2.7.15, 2.8.7, and 2.9.2 as well as previous versions are affected.
🎖@cveNotify
🚨 CVE-2020-26420
Memory leak in RTPS protocol dissector in Wireshark 3.4.0 and 3.2.0 to 3.2.8 allows denial of service via packet injection or crafted capture file.
🎖@cveNotify
Memory leak in RTPS protocol dissector in Wireshark 3.4.0 and 3.2.0 to 3.2.8 allows denial of service via packet injection or crafted capture file.
🎖@cveNotify
GitLab
2020/CVE-2020-26420.json · master · GitLab.org / GitLab CVE assignments · GitLab
This project hosts the CVEs that have been assigned by GitLab in its role as a CNA. See https://about.gitlab.com/security/cve/ for more information
🚨 CVE-2020-35655
In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image files because offsets and length tables are mishandled.
🎖@cveNotify
In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image files because offsets and length tables are mishandled.
🎖@cveNotify
🚨 CVE-2020-26419
Memory leak in the dissection engine in Wireshark 3.4.0 allows denial of service via packet injection or crafted capture file.
🎖@cveNotify
Memory leak in the dissection engine in Wireshark 3.4.0 allows denial of service via packet injection or crafted capture file.
🎖@cveNotify
GitLab
2020/CVE-2020-26419.json · master · GitLab.org / cves
This project hosts the CVEs that have been assigned by GitLab in its role as a CNA. See https://about.gitlab.com/security/cve/ for more information
🚨 CVE-2020-35653
In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.
🎖@cveNotify
In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.
🎖@cveNotify
🚨 CVE-2020-35654
In Pillow before 8.1.0, TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode.
🎖@cveNotify
In Pillow before 8.1.0, TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode.
🎖@cveNotify
🚨 CVE-2020-26418
Memory leak in Kafka protocol dissector in Wireshark 3.4.0 and 3.2.0 to 3.2.8 allows denial of service via packet injection or crafted capture file.
🎖@cveNotify
Memory leak in Kafka protocol dissector in Wireshark 3.4.0 and 3.2.0 to 3.2.8 allows denial of service via packet injection or crafted capture file.
🎖@cveNotify
GitLab
2020/CVE-2020-26418.json · master · GitLab.org / cves
This project hosts the CVEs that have been assigned by GitLab in its role as a CNA. See https://about.gitlab.com/security/cve/ for more information
🚨 CVE-2020-29394
A buffer overflow in the dlt_filter_load function in dlt_common.c in dlt-daemon 2.8.5 (GENIVI Diagnostic Log and Trace) allows arbitrary code execution because fscanf is misused (no limit on the number of characters to be read in a format argument).
🎖@cveNotify
A buffer overflow in the dlt_filter_load function in dlt_common.c in dlt-daemon 2.8.5 (GENIVI Diagnostic Log and Trace) allows arbitrary code execution because fscanf is misused (no limit on the number of characters to be read in a format argument).
🎖@cveNotify
GitHub
stack buffer overflow in dlt_filter_load · Issue #274 · COVESA/dlt-daemon
Summary An exploitable buffer overflow vulnerability exists in the dlt-daemon, A specially crafted Filter file can cause a buffer overflow, resulting in multiple corruptions and potentially code ex...
🚨 CVE-2021-3318
attach/ajax.php in DzzOffice through 2.02.1 allows XSS via the editorid parameter.
🎖@cveNotify
attach/ajax.php in DzzOffice through 2.02.1 allows XSS via the editorid parameter.
🎖@cveNotify
GitHub
Potential XSS Vulnerability · Issue #173 · zyx0814/dzzoffice
There is a potential XSS vulnerability in dzz/attach/ajax.php using the 'editorid' parameter.
🚨 CVE-2020-16236
FPWIN Pro is vulnerable to an out-of-bounds read vulnerability when a user opens a maliciously crafted project file, which may allow an attacker to remotely execute arbitrary code.
🎖@cveNotify
FPWIN Pro is vulnerable to an out-of-bounds read vulnerability when a user opens a maliciously crafted project file, which may allow an attacker to remotely execute arbitrary code.
🎖@cveNotify
🚨 CVE-2020-28247
The lettre library through 0.10.0-alpha for Rust allows arbitrary sendmail option injection via transport/sendmail/mod.rs.
🎖@cveNotify
The lettre library through 0.10.0-alpha for Rust allows arbitrary sendmail option injection via transport/sendmail/mod.rs.
🎖@cveNotify
GitHub
GitHub - lettre/lettre: a mailer library for Rust
a mailer library for Rust. Contribute to lettre/lettre development by creating an account on GitHub.
🚨 CVE-2019-0230
Apache Struts 2.0.0 to 2.5.20 forced double OGNL evaluation, when evaluated on raw user input in tag attributes, may lead to remote code execution.
🎖@cveNotify
Apache Struts 2.0.0 to 2.5.20 forced double OGNL evaluation, when evaluated on raw user input in tag attributes, may lead to remote code execution.
🎖@cveNotify
Packetstormsecurity
Apache Struts 2.5.20 Double OGNL Evaluation ≈ Packet Storm
Information Security Services, News, Files, Tools, Exploits, Advisories and Whitepapers
🚨 CVE-2018-10237
Unbounded memory allocation in Google Guava 11.0 through 24.x before 24.1.1 allows remote attackers to conduct denial of service attacks against servers that depend on this library and deserialize attacker-provided data, because the AtomicDoubleArray class (when serialized with Java serialization) and the CompoundOrdering class (when serialized with GWT serialization) perform eager allocation without appropriate checks on what a client has sent and whether the data size is reasonable.
🎖@cveNotify
Unbounded memory allocation in Google Guava 11.0 through 24.x before 24.1.1 allows remote attackers to conduct denial of service attacks against servers that depend on this library and deserialize attacker-provided data, because the AtomicDoubleArray class (when serialized with Java serialization) and the CompoundOrdering class (when serialized with GWT serialization) perform eager allocation without appropriate checks on what a client has sent and whether the data size is reasonable.
🎖@cveNotify
🚨 CVE-2018-8088
org.slf4j.ext.EventData in the slf4j-ext module in QOS.CH SLF4J before 1.8.0-beta2 allows remote attackers to bypass intended access restrictions via crafted data.
🎖@cveNotify
org.slf4j.ext.EventData in the slf4j-ext module in QOS.CH SLF4J before 1.8.0-beta2 allows remote attackers to bypass intended access restrictions via crafted data.
🎖@cveNotify