🚨 CVE-2023-50975
The TD Bank TD Advanced Dashboard client through 3.0.3 for macOS allows arbitrary code execution because of the lack of electron::fuses::IsRunAsNodeEnabled (i.e., ELECTRON_RUN_AS_NODE can be used in production). This makes it easier for a compromised process to access banking information.

🎖@cveNotify

🚨 CVE-2024-1707
A vulnerability, which was classified as problematic, was found in GARO WALLBOX GLB+ T2EV7 0.5. This affects an unknown part of the file /index.jsp#settings of the component Software Update Handler. The manipulation of the argument Reference leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-254397 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2024-22473
TRNG is used before initialization by ECDSA signing driver when exiting EM2/EM3 on Virtual Secure Vault (VSE) devices. This defect may allow Signature Spoofing by Key Recreation.This issue affects Gecko SDK through v4.4.0.

🎖@cveNotify

🚨 CVE-2024-24476
Buffer Overflow vulnerability in Wireshark team Wireshark before v.4.2.0 allows a remote attacker to cause a denial of service via the pan/addr_resolv.c, and ws_manuf_lookup_str(), size components.

🎖@cveNotify

🚨 CVE-2023-22392
A Missing Release of Memory after Effective Lifetime vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS).

PTX3000, PTX5000, QFX10000, PTX1000, PTX10002, and PTX10004, PTX10008 and PTX10016 with LC110x FPCs do not support certain flow-routes. Once a flow-route is received over an established BGP session and an attempt is made to install the resulting filter into the PFE, FPC heap memory is leaked. The FPC heap memory can be monitored using the CLI command "show chassis fpc".

The following syslog messages can be observed if the respective filter derived from a flow-route cannot be installed.

expr_dfw_sfm_range_add:661 SFM packet-length Unable to get a sfm entry for updating the hw
expr_dfw_hw_sfm_add:750 Unable to add the filter secondarymatch to the hardware
expr_dfw_base_hw_add:52 Failed to add h/w sfm data.
expr_dfw_base_hw_create:114 Failed to add h/w data.
expr_dfw_base_pfe_inst_create:241 Failed to create base inst for sfilter 0 on PFE 0 for __flowspec_default_inet__
expr_dfw_flt_inst_change:1368 Failed to create __flowspec_default_inet__ on PFE 0
expr_dfw_hw_pgm_fnum:465 dfw_pfe_inst_old not found for pfe_index 0!
expr_dfw_bp_pgm_flt_num:548 Failed to pgm bind-point in hw: generic failure
expr_dfw_bp_topo_handler:1102 Failed to program fnum.
expr_dfw_entry_process_change:679 Failed to change instance for filter __flowspec_default_inet__.
This issue affects Juniper Networks Junos OS:

on PTX1000, PTX10002, and PTX10004, PTX10008 and PTX10016 with LC110x FPCs:



* All versions prior to 20.4R3-S5;
* 21.1 versions prior to 21.1R3-S4;
* 21.2 versions prior to 21.2R3-S2;
* 21.3 versions prior to 21.3R3;
* 21.4 versions prior to 21.4R2-S2, 21.4R3;
* 22.1 versions prior to 22.1R1-S2, 22.1R2.




on PTX3000, PTX5000, QFX10000:



* All versions prior to 20.4R3-S8;
* 21.1 version 21.1R1 and later versions;
* 21.2 versions prior to 21.2R3-S6;
* 21.3 versions prior to 21.3R3-S5;
* 21.4 versions prior to 21.4R3-S4;
* 22.1 versions prior to 22.1R3-S3
* 22.2 versions prior to 22.2R3-S1
* 22.3 versions prior to 22.3R2-S2, 22.3R3
* 22.4 versions prior to 22.4R2.

🎖@cveNotify

🚨 CVE-2023-6533
Malformed Device Reset Locally Command Class packets can be sent to the controller, causing the controller to assume the end device has left the network. After this, frames sent by the end device will not be acknowledged by the controller. This vulnerability exists in PC Controller v5.54.0, and earlier.

🎖@cveNotify

🚨 CVE-2023-6640
Malformed S2 Nonce Get Command Class packets can be sent to crash PC Controller v5.54.0 and earlier.

🎖@cveNotify

🚨 CVE-2024-25249
An issue in He3 App for macOS version 2.0.17, allows remote attackers to execute arbitrary code via the RunAsNode and enableNodeClilnspectArguments settings.

🎖@cveNotify

🚨 CVE-2024-25461
Directory Traversal vulnerability in Terrasoft, Creatio Terrasoft CRM v.7.18.4.1532 allows a remote attacker to obtain sensitive information via a crafted request to the terrasoft.axd component.

🎖@cveNotify

🚨 CVE-2024-26310
Archer Platform 6.8 before 6.14 P2 (6.14.0.2) contains an improper access control vulnerability. A remote authenticated malicious user could potentially exploit this to gain access to API information that should only be accessible with extra privileges.

🎖@cveNotify

🚨 CVE-2024-26311
Archer Platform 6.x before 6.14 P2 HF1 (6.14.0.2.1) contains a reflected XSS vulnerability. A remote authenticated malicious Archer user could potentially exploit this by tricking a victim application user into supplying malicious JavaScript code to the vulnerable web application. This code is then reflected to the victim and gets executed by the web browser in the context of the vulnerable web application.

🎖@cveNotify

🚨 CVE-2002-0725
NTFS file system in Windows NT 4.0 and Windows 2000 SP2 allows local attackers to hide file usage activities via a hard link to the target file, which causes the link to be recorded in the audit trail instead of the target file.

🎖@cveNotify

🚨 CVE-2020-3452
A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct directory traversal attacks and read sensitive files on a targeted system. The vulnerability is due to a lack of proper input validation of URLs in HTTP requests processed by an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request containing directory traversal character sequences to an affected device. A successful exploit could allow the attacker to view arbitrary files within the web services file system on the targeted device. The web services file system is enabled when the affected device is configured with either WebVPN or AnyConnect features. This vulnerability cannot be used to obtain access to ASA or FTD system files or underlying operating system (OS) files.

🎖@cveNotify

🚨 CVE-2021-21272
ORAS is open source software which enables a way to push OCI Artifacts to OCI Conformant registries. ORAS is both a CLI for initial testing and a Go Module. In ORAS from version 0.4.0 and before version 0.9.0, there is a "zip-slip" vulnerability. The directory support feature allows the downloaded gzipped tarballs to be automatically extracted to the user-specified directory where the tarball can have symbolic links and hard links. A well-crafted tarball or tarballs allow malicious artifact providers linking, writing, or overwriting specific files on the host filesystem outside of the user-specified directory unexpectedly with the same permissions as the user who runs `oras pull`. Users of the affected versions are impacted if they are `oras` CLI users who runs `oras pull`, or if they are Go programs, which invoke `github.com/deislabs/oras/pkg/content.FileStore`. The problem has been fixed in version 0.9.0. For `oras` CLI users, there is no workarounds other than pulling from a trusted artifact provider. For `oras` package users, the workaround is to not use `github.com/deislabs/oras/pkg/content.FileStore`, and use other content stores instead, or pull from a trusted artifact provider.

🎖@cveNotify

🚨 CVE-2020-27833
A Zip Slip vulnerability was found in the oc binary in openshift-clients where an arbitrary file write is achieved by using a specially crafted raw container image (.tar file) which contains symbolic links. The vulnerability is limited to the command `oc image extract`. If a symbolic link is first created pointing within the tarball, this allows further symbolic links to bypass the existing path check. This flaw allows the tarball to create links outside the tarball's parent directory, allowing for executables or configuration files to be overwritten, resulting in arbitrary code execution. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. Versions up to and including openshift-clients-4.7.0-202104250659.p0.git.95881af are affected.

🎖@cveNotify

🚨 CVE-2021-39155
Istio is an open source platform for providing a uniform way to integrate microservices, manage traffic flow across microservices, enforce policies and aggregate telemetry data. According to [RFC 4343](https://datatracker.ietf.org/doc/html/rfc4343), Istio authorization policy should compare the hostname in the HTTP Host header in a case insensitive way, but currently the comparison is case sensitive. The proxy will route the request hostname in a case-insensitive way which means the authorization policy could be bypassed. As an example, the user may have an authorization policy that rejects request with hostname "httpbin.foo" for some source IPs, but the attacker can bypass this by sending the request with hostname "Httpbin.Foo". Patches are available in Istio 1.11.1, Istio 1.10.4 and Istio 1.9.8. As a work around a Lua filter may be written to normalize Host header before the authorization check. This is similar to the Path normalization presented in the [Security Best Practices](https://istio.io/latest/docs/ops/best-practices/security/#case-normalization) guide.

🎖@cveNotify

🚨 CVE-2010-3322
The XML parser in Splunk 4.0.0 through 4.1.4 allows remote authenticated users to obtain sensitive information and gain privileges via an XML External Entity (XXE) attack to unknown vectors.

🎖@cveNotify

🚨 CVE-2020-25644
A memory leak flaw was found in WildFly OpenSSL in versions prior to 1.1.3.Final, where it removes an HTTP session. It may allow the attacker to cause OOM leading to a denial of service. The highest threat from this vulnerability is to system availability.

🎖@cveNotify

🚨 CVE-2023-42503
Improper Input Validation, Uncontrolled Resource Consumption vulnerability in Apache Commons Compress in TAR parsing.This issue affects Apache Commons Compress: from 1.22 before 1.24.0.

Users are recommended to upgrade to version 1.24.0, which fixes the issue.

A third party can create a malformed TAR file by manipulating file modification times headers, which when parsed with Apache Commons Compress, will cause a denial of service issue via CPU consumption.

In version 1.22 of Apache Commons Compress, support was added for file modification times with higher precision (issue # COMPRESS-612 [1]). The format for the PAX extended headers carrying this data consists of two numbers separated by a period [2], indicating seconds and subsecond precision (for example “1647221103.5998539”). The impacted fields are “atime”, “ctime”, “mtime” and “LIBARCHIVE.creationtime”. No input validation is performed prior to the parsing of header values.

Parsing of these numbers uses the BigDecimal [3] class from the JDK which has a publicly known algorithmic complexity issue when doing operations on large numbers, causing denial of service (see issue # JDK-6560193 [4]). A third party can manipulate file time headers in a TAR file by placing a number with a very long fraction (300,000 digits) or a number with exponent notation (such as “9e9999999”) within a file modification time header, and the parsing of files with these headers will take hours instead of seconds, leading to a denial of service via exhaustion of CPU resources. This issue is similar to CVE-2012-2098 [5].

[1]: https://issues.apache.org/jira/browse/COMPRESS-612
[2]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/pax.html#tag_20_92_13_05
[3]: https://docs.oracle.com/javase/8/docs/api/java/math/BigDecimal.html
[4]: https://bugs.openjdk.org/browse/JDK-6560193
[5]: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2098

Only applications using CompressorStreamFactory class (with auto-detection of file types), TarArchiveInputStream and TarFile classes to parse TAR files are impacted. Since this code was introduced in v1.22, only that version and later versions are impacted.

🎖@cveNotify

🚨 CVE-2023-44981
Authorization Bypass Through User-Controlled Key vulnerability in Apache ZooKeeper. If SASL Quorum Peer authentication is enabled in ZooKeeper (quorum.auth.enableSasl=true), the authorization is done by verifying that the instance part in SASL authentication ID is listed in zoo.cfg server list. The instance part in SASL auth ID is optional and if it's missing, like 'eve@EXAMPLE.COM', the authorization check will be skipped. As a result an arbitrary endpoint could join the cluster and begin propagating counterfeit changes to the leader, essentially giving it complete read-write access to the data tree. Quorum Peer authentication is not enabled by default.

Users are recommended to upgrade to version 3.9.1, 3.8.3, 3.7.2, which fixes the issue.

Alternately ensure the ensemble election/quorum communication is protected by a firewall as this will mitigate the issue.

See the documentation for more details on correct cluster administration.

🎖@cveNotify

🚨 CVE-2024-0822
An authentication bypass vulnerability was found in overt-engine. This flaw allows the creation of users in the system without authentication due to a flaw in the CreateUserSession command.

🎖@cveNotify