🚨 CVE-2026-123995
Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains an input validation vulnerability in the UPnP/DLNA AVTransport SOAP service that allows a LAN-adjacent attacker to inject arbitrary URIs via the CurrentURI field of SetAVTransportURI without validating the scheme, host, or media legitimacy. Attackers can supply schemes such as http://, file:///data/misc/wifi/, rtsp://, or smb:// to have the TV fetch and render attacker-controlled content after a one-time DLNA pairing, enabling phishing pages, fake firmware prompts, and fake emergency alerts to be displayed, with subsequent commands executing silently.

🎖@cveNotify

🚨 CVE-2026-123996
Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains a missing authentication vulnerability in the UPnP/DLNA RenderingControl service on TCP port 38400 that allows a LAN-adjacent attacker to issue SetVolume, SetMute, and SelectPreset(FactoryDefaults) commands after a one-time DLNA pairing with no per-command authentication or session token. Attackers can send a continuous loop of unauthenticated commands to override the physical remote, change volume and mute, and reset all picture and audio calibration settings.

🎖@cveNotify

🚨 CVE-2026-123997
Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains an unauthenticated denial-of-service vulnerability in the UPnP/DLNA AVTransport SOAP service that allows LAN-adjacent attackers to freeze the entire television software layer by sending a crafted SetAVTransportURI request on TCP port 38400. Attackers can exploit this flaw without credentials to render the device completely unresponsive to remote control or front-panel input, requiring a physical power cycle to restore functionality.

🎖@cveNotify

🚨 CVE-2026-123998
Hisense VIDAA Smart TV firmware V0000.01.00a.P0220 contains an authentication bypass vulnerability in its remote-control MQTT broker on TCP port 36669, which accepts publicly documented default credentials and an ineffective 4-digit pairing PIN with no rate limiting or lockout, allowing a brute force of the entire code space in about five seconds, while some actions require no pairing at all. A LAN-adjacent attacker can exploit this to inject key events, change volume, switch input sources, enumerate inputs, launch arbitrary installed applications, and monitor pairing activity, posing a significant risk in hotel deployments where untrusted LAN access is common.

🎖@cveNotify

🚨 CVE-2026-19703
A weak password hashing vulnerability has been identified on SonicOS virtual appliances, which in specific conditions could potentially enable an attacker with existing local access to disclose a platform credential. The credential provides access to a limited subset of platform settings.

🎖@cveNotify

🚨 CVE-2026-19868
An authentication enforcement vulnerability in SonicOS SSLVPN service may allow a user with valid credentials for an alternate authentication method to bypass SAML authentication controls. Successful exploitation may also bypass SAML-enforced multi-factor authentication (MFA).

🎖@cveNotify

🚨 CVE-2026-62346
Wanderer is a self-hosted trail database for saving and sharing adventures. Prior to 0.19.3, an authenticated local user can submit crafted waypoint.name and waypoint.icon values that the trail elevation graph interpolates into an innerHTML template in web/src/lib/vendor/maplibre-elevation-profile/elevationprofile.ts without HTML encoding or icon validation. A victim viewing the elevation profile executes the attacker-controlled script in their browser. Separately, federated waypoints can deliver the same malicious fields across instances without requiring the attacker to have a local account on the receiving instance. The script can expose session data or perform actions in the victim's context. This issue is fixed in version 0.19.3.

🎖@cveNotify

🚨 CVE-2026-71495
Wanderer is a self-hosted trail database for saving and sharing adventures. Prior to 0.20.0, when PUBLIC_PRIVATE_INSTANCE is not set to true, the unauthenticated POST /api/v1/trail/download handler passes the attacker-controlled JSON url field directly to event.fetch() and returns the fetched response. This allows requests to internal services such as db:8090 and search:7700, cloud metadata addresses, and other network destinations, exposing returned data and permitting internal network reconnaissance or denial of service. This issue is fixed in version 0.20.0.

🎖@cveNotify

🚨 CVE-2026-77708
A pre-authentication stack-based buffer overflow vulnerability has been identified in the SonicOS TACACS+ authentication client, which in specific conditions could potentially enable a remote unauthenticated attacker to cause an application level denial of service.

🎖@cveNotify

🚨 CVE-2026-77709
A pre-authentication heap-based buffer overflow vulnerability has been identified in the SonicOS TACACS+ authentication client, which in specific conditions could potentially enable a remote unauthenticated attacker to cause an application level denial of service.

🎖@cveNotify

🚨 CVE-2026-82308
A pre-authentication heap-based buffer overflow vulnerability has been identified in the SonicOS SSL-VPN service, which could potentially enable a remote unauthenticated attacker to cause an application level denial of service.

🎖@cveNotify

🚨 CVE-2026-84473
Authentication Bypass / Missing Brute-Force Protection in remote.php/webdav/ in ownCloud ownCloud server 10.16.3 allows an unauthenticated remote attacker to perform unlimited online password guessing against WebDAV accounts via repeated HTTP Basic Authentication requests to the WebDAV endpoint.

🎖@cveNotify

🚨 CVE-2026-90975
A vulnerability in Realtek's RtUsbA64.sys USB audio driver allows a local, low-privileged user to abuse a kernel I/O control (IOCTL) interface that acts on a caller-supplied user-mode pointer without proper validation or capture. By issuing crafted property requests an attacker can obtain kernel-mode read and write access, which can be leveraged for local privilege escalation and arbitrary kernel code execution.

🎖@cveNotify

🚨 CVE-2024-2511
Issue summary: Some non-default TLS server configurations can cause unbounded
memory growth when processing TLSv1.3 sessions

Impact summary: An attacker may exploit certain server configurations to trigger
unbounded memory growth that would lead to a Denial of Service

This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is
being used (but not if early_data support is also configured and the default
anti-replay protection is in use). In this case, under certain conditions, the
session cache can get into an incorrect state and it will fail to flush properly
as it fills. The session cache will continue to grow in an unbounded manner. A
malicious client could deliberately create the scenario for this failure to
force a Denial of Service. It may also happen by accident in normal operation.

This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS
clients.

The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL
1.0.2 is also not affected by this issue.

🎖@cveNotify

🚨 CVE-2026-98432
In the Linux kernel, the following vulnerability has been resolved:

ipv4: free inet_opt and ireq_opt after an RCU grace period

tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the
child socket (newinet->inet_opt) without copying it.

Another cpu can concurrently process a retransmitted SYN for the same
request socket, and send a SYNACK from tcp_check_req().
tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt
under rcu_read_lock() only, and ip_build_and_send_pkt() and
ip_options_build() then read opt->optlen twice.

Note that the SYNACK timer itself is not an issue: it holds a
reference on its request socket, and inet_csk_reqsk_queue_drop()
calls timer_delete_sync() before the child can be freed.

Since commit 079096f103fa ("tcp/dccp: install syn_recv requests
into ehash table"), request sockets are processed without holding
the listener lock, so nothing prevents the child socket from being
freed while the SYNACK is still being built. TCP child sockets do
not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt
with a plain kfree(), leading to a use-after-free in
ip_options_build().

A similar issue exists with request socket migration
(net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE
program). reqsk_timer_handler() clones the request socket with
inet_reqsk_clone(), so that the old request socket and its clone
share the same ireq_opt, then reqsk_migrate_reset() clears the
pointer in the old one. Another cpu holding a reference on the old
request socket can still be using these options (sending a SYNACK,
or creating a child in tcp_v4_syn_recv_sock()) when the clone is
freed, and tcp_v4_reqsk_destructor() also uses a plain kfree().

Readers already use RCU, and other paths replacing inet_opt
(do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use
kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and
tcp_v4_reqsk_destructor() as well.

IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock()
duplicates the options. tcp_v6_reqsk_destructor() has the same
migration issue with ipv6_opt, which is only set by CALIPSO. This
will be addressed in a separate patch.

🎖@cveNotify

🚨 CVE-2026-101397
Vulnerability in the Siebel Apps - Marketing product of Oracle Siebel CRM (component: Marketing). Supported versions that are affected are 17.0-26.9. Difficult to exploit vulnerability allows high privileged attacker with network access via HTTP to compromise Siebel Apps - Marketing. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Siebel Apps - Marketing accessible data. CVSS 3.1 Base Score 2.2 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:L/I:N/A:N).

🎖@cveNotify

🚨 CVE-2026-102703
[This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]

A common access pattern is a batch of Grant Copy operations acting on
adjacent address ranges in the same source or destination page. For
performance reasons, Xen caches details internally to reuse already
validated data. The conditions on when to re-validate the internal data
were not correct in some cases:

- Frame numbers and grant references could wrongly be mixed up. This
is CVE-2026-102703.

- Copying by frame number (rather than grant reference) is permitted
only when operating on the caller's own memory. The check to enforce
this restriction was misplaced. This is CVE-2026-102704.

🎖@cveNotify

🚨 CVE-2026-102704
[This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]

A common access pattern is a batch of Grant Copy operations acting on
adjacent address ranges in the same source or destination page. For
performance reasons, Xen caches details internally to reuse already
validated data. The conditions on when to re-validate the internal data
were not correct in some cases:

- Frame numbers and grant references could wrongly be mixed up. This
is CVE-2026-102703.

- Copying by frame number (rather than grant reference) is permitted
only when operating on the caller's own memory. The check to enforce
this restriction was misplaced. This is CVE-2026-102704.

🎖@cveNotify

🚨 CVE-2026-6842
A flaw was found in nano. In environments with permissive umask settings, a local attacker can exploit incorrect directory permissions (0777 instead of 0700) for the `~/.local` directory. This allows the attacker to inject a malicious `.desktop` launcher, which could lead to unintended actions or information disclosure if the launcher is subsequently processed.

🎖@cveNotify

🚨 CVE-2026-59842
A flaw was found in libssh. During server-side GSSAPI key exchange, a client-supplied Curve25519 public key shorter than the expected length is copied without proper length validation, leading to an out-of-bounds heap read. This could allow a remote unauthenticated attacker to disclose small amounts of server memory.

🎖@cveNotify

🚨 CVE-2026-59849
A flaw was found in libssh. Logic errors in automatic certificate-based public key authentication can cause libssh clients to loop indefinitely when configured certificates are missing or repeatedly rejected by a server, leading to denial of service.

🎖@cveNotify