🚨 CVE-2026-53920
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. From version 17.01.0 to before version 25.12.3, odhcpd's DHCPv6 IA parser accepts an IA_NA or IA_PD option whose body is shorter than struct dhcpv6_ia_hdr, casts the option header to that full structure, and reads ia->iaid before proving that the IA body contains the IAID field. If an unauthenticated network-adjacent client places a zero-length or otherwise short IA option at the end of odhcpd's 8192-byte receive stack buffer, the IAID read crosses from data_buf into adjacent stack memory. The disclosed bytes are then reflected in the DHCPv6 reply IAID; prior ARM validation showed data_buf[8192:8196] disclosing the saved stack canary, and wider stack scans can leak ASLR-useful stack/process contents. This issue has been patched in version 25.12.3.

🎖@cveNotify

🚨 CVE-2026-53921
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA response handler writes past the end of a fixed 512-byte stack buffer (pdbuf) when a single DHCPv6 REQUEST carries enough IA options to nearly exhaust the reply space. Two independent overflow sites exist in the same call chain, both reachable from the network via a single unauthenticated UDP packet. odhcpd runs as root on OpenWrt; embedded targets often lack stack canaries and ASLR, making code execution realistic. This issue has been patched in version 25.12.

🎖@cveNotify

🚨 CVE-2026-55606
odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. In versions 25.12 and prior, odhcpd's DHCPv6 self-loop detection at dhcpv6.c:720 uses a network-byte-order DUID length value directly as the memcmp() size parameter. On little-endian hosts, this causes memcmp() to read far beyond the stack buffer — a single unauthenticated DHCPv6 packet triggers a 2560-byte overread from a 128-byte buffer. At time of publication, there are no publicly available patches.

🎖@cveNotify

🚨 CVE-2026-39902
Cacti is an open source performance and fault management framework. Prior to version 1.2.31, the prior blocklist ([;&| `$\\n\r]) omitted single-quote, double-quote, redirect operators, subshell parens and braces. An authenticated admin could save an input_string` containing single-quote, redirect operator, or subshell parens, and pass the check. This issue has been patched in version 1.2.31.

🎖@cveNotify

🚨 CVE-2026-46531
Cacti is an open source performance and fault management framework. From version 1.2.27 to before version 1.2.31, Cacti contains an authenticated stored second-order SQL injection in the automation tree rule item handler. A user holding the Automation realm (default General Administration role) can persist an arbitrary SQL fragment in the automation_tree_rule_items.field column. The fragment is later concatenated directly into a SELECT ... AS source FROM ... clause in lib/api_automation.php :: create_all_header_nodes() and executed when an administrator triggers automation via the standard graphs.php?action=actions&drp_action=8 ("Apply Automation Rules") bulk action. The result of the injected SELECT is written into graph_tree_items.title and rendered in the Cacti tree UI, providing a direct exfiltration channe. This issue has been patched in version 1.2.31.

🎖@cveNotify

🚨 CVE-2026-49442
Cacti is an open source performance and fault management framework. Prior to version 1.2.31, a User Enumeration vulnerability allows an attacker to identify valid usernames on the Cacti service. When a user attempts to log in, the application returns slightly different error messages depending on whether the provided username exists in the system. When username exists on Cacti, in the response, they see Access Denied! Login failed. When it does not exist on Cacti, they see Access Denied! Login Failed. The only difference between the responses is the capitalization of the letter "f" in the word failed. This issue has been patched in version 1.2.31.

🎖@cveNotify

🚨 CVE-2026-53942
Conda Organization Infrastructure is a centralized location for infrastructure codes. Prior to commit 9c0f238, a GitHub Actions Pwn Request vulnerability appears to remain present in conda/conda. The affected workflow is .github/workflows/update.yml. It is triggered by issue_comment events containing @conda-bot render or @conda-bot recreate. For the render path, the workflow obtains the pull request head repository and branch from the PR API, checks out that PR-controlled repository/ref using secrets.SYNC_TOKEN, and then runs conda/actions/template-files@7f6830b1428a9bd47f0b068892c77eae95207037. The external template-files action reads its default configuration and templates from the checked-out working directory. In the confirmed finding, that action uses an unsandboxed Jinja2 environment to render attacker-controlled template content. This creates a Pwn Request chain in which an untrusted PR/comment path can reach template rendering in a privileged token context. This issue has been patched via commit 9c0f238.

🎖@cveNotify

🚨 CVE-2025-45528
An issue in Nitro Software, Inc Nitro PDF Pro for macOS v.14.7 allows a local attacker to execute arbitrary code via a crafted PDF

🎖@cveNotify

🚨 CVE-2026-57845
Hugging Face Datasets through 5.1.0 contains an insecure deserialization vulnerability that allows attackers to execute arbitrary Python code by crafting a malicious pickle file loaded through the deprecated pandas packaged builder. Attackers can supply a pickle-backed dataset that is processed by Pandas._generate_tables via pandas.read_pickle() without validation, so when a victim calls datasets.load_dataset("pandas", data_files=...), the embedded __reduce__ payload executes code with the victim process's privileges.

🎖@cveNotify

🚨 CVE-2026-105481
A flaw in Node.js HTTP Agent connection reuse can cause a client to accept as valid a response that was sent before the client has sent the request. This is an incomplete fix of CVE-2026-48931.

The guard that destroys idle keep-alive sockets when unexpected data arrives only runs when the event loop polls for I/O. If an unsolicited response has already reached the socket but has not been read yet when the socket is handed to a new request, for example because the event loop was busy with synchronous work, the guard is removed without seeing it and the data is parsed as the response to the new request.

This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.

🎖@cveNotify

🚨 CVE-2026-105482
A flaw in Node.js DNS resolution allows hostnames containing a NUL byte to be silently truncated by the dns.resolve*() functions and dns.reverse(). This is an incomplete fix of CVE-2026-48930, which only covered dns.lookup() and the net/tls host options.

Because the name is passed to c-ares as a C string, resolving attacker.example\0.trusted.example queries attacker.example and returns its records without any error. Applications that validate a hostname, for example against a domain allowlist, and then resolve it with dns.resolve*() can act on records for a different name than the one they validated.

This vulnerability affects Node.js 26.x, 24.x, and 22.x.

🎖@cveNotify

🚨 CVE-2026-105483
A flaw in Node.js TLS hostname verification allows a certificate without a matching IP address SAN to authenticate a connection to an IPv4 address when the host is written with non-ASCII characters, such as fullwidth digits (`１２７.0.0.1`).

`tls.checkServerIdentity()` did not recognize such hosts as IP addresses, even though they normalize and resolve to a regular IPv4 address, and matched them against the certificate DNS names and Common Name instead. A certificate containing `DNS:127.0.0.1` or `DNS:*.0.0.1` could therefore be accepted for an IP endpoint it was not issued for. This is a regression introduced after the fix for CVE-2026-48618.

This vulnerability affects Node.js **26.x** and **24.x**.

🎖@cveNotify

🚨 CVE-2026-106069
A flaw in Node.js TLS hostname verification can cause a server certificate to be validated against a different IP address than the one the client connected to, when the host is a non-canonical IPv4 literal with a leading zero, such as `0127.0.0.1`.

`tls.checkServerIdentity()` normalizes the host following the WHATWG URL rules, which read a leading-zero octet as octal (`0127.0.0.1` becomes `87.0.0.1`), while the connection is made through the operating system resolver, which on some platforms such as macOS reads it as decimal (`127.0.0.1`). A server at the connected address can then be authenticated with a certificate issued for another IP address.

This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.

🎖@cveNotify

🚨 CVE-2026-106070
A flaw in the Node.js `zlib.ZipFile` API can cause it to return bytes that do not belong to the requested entry after the local and central header validation fails.

When `zipEntry.modified` is read on an archive whose local header does not match its central directory, either directly or while compacting the archive, the validation error is caught but the parsed local header is left cached without a content offset. A later content read then returns attacker-controlled bytes from the start of the file instead of rejecting the archive, and CRC-32 verification still passes because the attacker controls the central directory CRC. A Node.js-based scanner can therefore approve different content from what another ZIP implementation extracts from the same archive.

This vulnerability affects Node.js **26.x**.

🎖@cveNotify

🚨 CVE-2026-106072
A flaw in Node.js TLS hostname verification allows a certificate with only a DNS SAN to authenticate an IP endpoint when the client connects using a non-canonical IPv4 spelling, such as `0177.0.0.1`, `0x7f.0.0.1`, `2130706433` or `127.1`.

`tls.checkServerIdentity()` did not classify these hosts as IP addresses, but normalized them to their canonical form and matched the result against the certificate DNS names. A certificate containing `DNS:127.0.0.1` and no `IP Address:127.0.0.1` SAN was therefore accepted, while the same certificate is correctly rejected for `127.0.0.1`. Exploitation requires a certificate with a numeric DNS SAN issued by a CA trusted by the client, and a platform resolver that accepts these spellings, such as glibc.

This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.

🎖@cveNotify

🚨 CVE-2026-106073
A flaw in Node.js Permission Model filesystem enforcement leaves `fs.realpathSync()` without the required read permission checks. This is an incomplete fix of CVE-2026-21715, which only covered `fs.realpathSync.native()`.

As a result, code running under `--permission` with restricted `--allow-fs-read` can still use `fs.realpathSync()` to check file existence, resolve symlink targets, and enumerate filesystem paths outside of permitted directories.

This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.

🎖@cveNotify

🚨 CVE-2026-106074
A flaw in Node.js `crypto` causes the internal entropy caches used by `crypto.randomUUID()`, `crypto.randomUUIDv7()`, and `crypto.randomInt()` to be saved into user-land startup snapshots (`--build-snapshot`) and single executable applications built with `useSnapshot`.

If any of these functions, or an API that relies on them such as `URL.createObjectURL()`, is called while the snapshot is built, every process started from that snapshot returns the same values until the cache is refilled: up to 127 UUIDs and about 1,000 `randomInt()` values. Identifiers expected to be unique can collide across processes, and values issued by one process can be predicted by observing another.

This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.

🎖@cveNotify

🚨 CVE-2026-110975
A flaw was found in Kruize Autotune. Its REST API ships without an authentication layer, and the endpoints that return datasource configuration — the list-datasources endpoint (GET /datasources) and the datasource-metadata endpoint — serialized datasource objects using a default Gson configuration with no field-exclusion strategy. As a result, the authentication secrets stored for each configured monitoring datasource (basic-auth passwords, bearer tokens, API keys, and OAuth2 client secrets) were returned in cleartext to any client able to reach the service. An attacker with network access to Autotune could harvest these credentials and reuse them to authenticate to the backing monitoring stack.

🎖@cveNotify

🚨 CVE-2026-115567
Tokio is a runtime for writing applications with Rust. In 1.54.0, a race condition between tokio::time::Interval::poll_tick (including .tick().await) and the multi-threaded runtime's time driver could drop an internal timer entry without synchronizing with the driver thread that was firing it. The race caused a use-after-free on the timer's waker and task state in safe Rust, which could produce assertion panics, task reference-count corruption, or heap memory corruption. This issue is fixed in 1.54.1.

🎖@cveNotify

🚨 CVE-2026-115812
Relative path traversal during model archive extraction in Amazon Web Services Multi Model Server 1.1.11 and earlier might allow remote actors to execute arbitrary code via a crafted model archive.



Multi Model Server is end of life and no fixed version is available. Users should discontinue use of Multi Model Server and migrate to a supported model serving solution.

🎖@cveNotify

🚨 CVE-2026-115813
Server-side request forgery in the model download path in Amazon Web Services Multi Model Server 1.1.11 and earlier might allow remote actors to send requests to internal network destinations via a crafted model URL.



Multi Model Server is end of life and no fixed version is available. Users should discontinue use of Multi Model Server and migrate to a supported model serving solution.

🎖@cveNotify