🚨 CVE-2026-96398
Incorrect Authorization vulnerability in Drupal Webform allows Forceful Browsing. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1.

🎖@cveNotify

🚨 CVE-2026-105270
Allocation of Resources Without Limits or Throttling vulnerability in esaml_binding in dropbox esaml allows an unauthenticated attacker to exhaust the Erlang VM atom table and crash the node via a crafted SAMLResponse.

esaml_binding:decode_response/2 parses the decoded SAMLResponse with xmerl_scan:string/2, which interns every element name, attribute name, and namespace prefix it reads as a permanent atom. The SAML consume (ACS) and single-logout endpoints call it on unauthenticated requests before any signature check, so one well-formed document with thousands of distinct names mints thousands of atoms while staying inside the 128 KB request body limit. Atoms are never reclaimed and the VM caps the atom table at about one million entries, so a few dozen requests abort the node.

This issue affects esaml: from 0.1.0 onward.

🎖@cveNotify

🚨 CVE-2026-86696
Allocation of Resources Without Limits or Throttling vulnerability in esaml in dropbox esaml allows an unauthenticated attacker to exhaust the Erlang VM atom table and crash the node via unsigned LogoutResponse messages.

esaml:status_code_map/1 in src/esaml.erl maps any StatusCode value it does not recognize to an atom with list_to_atom/1 on the last colon-separated segment of the URN. esaml_sp:validate_logout_response/2 verifies a signature only when the message carries one, so an unsigned LogoutResponse posted to the single-logout endpoint reaches esaml:decode_logout_response/1 and mints one permanent atom per distinct status value. Atoms are never reclaimed and the VM caps the atom table at about one million entries, so an attacker who posts that many distinct values aborts the node.

This issue affects esaml: from 0.1.0 onward.

🎖@cveNotify

🚨 CVE-2026-93471
Improper Handling of Highly Compressed Data (Data Amplification) in esaml_binding in dropbox esaml allows an unauthenticated attacker to exhaust server memory and crash the Erlang VM via a crafted compressed SAMLResponse.

esaml_binding:decode_response/2 base64-decodes the attacker-supplied SAMLResponse, inflates it with zlib:unzip/1 with no bound on the output, then converts the result to a charlist with binary_to_list/1 before parsing. This runs on the SAML consume (ACS) and single-logout endpoints, which accept unauthenticated requests by design, and it runs before any signature check. A small deflate stream reaches a compression ratio near 1000 to 1, so a request body of tens of kilobytes inflates to hundreds of megabytes and then to several gigabytes of list heap, so a few requests exhaust memory and take the node down.

This issue affects esaml: from 0.1.0 onward.

🎖@cveNotify

🚨 CVE-2026-115330
Lotus through 0.10.2 contains an sql injection vulnerability that allows authenticated organization users to execute arbitrary SQL by appending stacked statements to custom metric queries. Attackers can submit semicolon-separated SQL through POST /app/metrics/, bypassing first-statement-only validation, to read or modify data across all tenants.

🎖@cveNotify

🚨 CVE-2026-115331
Lotus through 0.10.2 contains an sql injection vulnerability that allows authenticated organization users to inject SQL by supplying crafted billable metric property_name or categorical filter values. Attackers can embed SQL in values rendered unescaped into Jinja-generated counter, gauge and rate metric queries to access the database shared by all tenants.

🎖@cveNotify

🚨 CVE-2026-115332
Lotus through 0.10.2 contains an sql injection vulnerability that allows authenticated organization users to inject SQL by registering crafted subscription_filter_keys that bypass keyword-only validation. Attackers can create subscriptions using the malicious key, which is rendered as an unquoted group-by identifier, to inject SQL into usage aggregation queries against the shared multi-tenant database.

🎖@cveNotify

🚨 CVE-2026-115333
Lotus through 0.10.2 contains an improper authentication vulnerability in the Go event ingestion middleware that validates API keys by prefix only, without checking the secret against the stored hashed_key. Attackers who know or obtain an API key prefix can submit usage events to POST /api/track/ as that organization, altering its metered usage and billing.

🎖@cveNotify

🚨 CVE-2026-115334
Lotus through 0.10.2 contains an authorization bypass vulnerability in ChangeUserOrganizationView.post that allows authenticated users to join any organization by supplying its UUID. Self-registered attackers who know another organization's UUID can send a POST request to /app/switch_organization/ to access that tenant's data and billing configuration.

🎖@cveNotify

🚨 CVE-2026-113582
UNSUPPORTED WHEN ASSIGNED Improper restriction of XML external entity references in Apache Abdera allows an attacker to access sensitive data or make server-side requests when an application parses attacker-controlled XML with Abdera.



This issue affects Apache Abdera: all versions.



Apache Abdera is retired and no longer supported, so we do not plan to release a version that fixes this issue. Users are recommended to migrate to a maintained alternative. Applications that cannot migrate should ensure that untrusted XML cannot reach the affected Abdera parser or JDBC adapter parsing paths. Actively maintained downstream products may still be impacted if they include an affected Abdera artifact.



NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

🎖@cveNotify

🚨 CVE-2026-115411
crawlseo before version 0.2.4 contains a server-side request forgery vulnerability in its crawler engine where isPrivateIp() fails to block reserved IP ranges such as RFC 6598 Carrier-Grade NAT, RFC 6890, TEST-NET ranges and certain IPv6 addresses, and additionally fails to pin the validated address for the actual outbound connection, allowing a TOCTOU DNS rebinding bypass. An authenticated attacker can add a malicious domain that resolves to an internal or restricted address, trigger a crawl to reach internal services or cloud metadata endpoints like 169.254.169.254, and retrieve the fetched page's title, description, headings, status code and links through the crawl results API, enabling internal network reconnaissance.

🎖@cveNotify

🚨 CVE-2026-114485
Insufficient protection of sensitive information in the user list endpoint in Devolutions Server 
2026.3.10.0 and earlier allows an authenticated attacker with delegated user view permissions to obtain the MFA secrets of all users via the user list API response.

🎖@cveNotify

🚨 CVE-2026-114486
Incorrect authorization in the Devolutions Gateway token generation in Devolutions Server 2026.3.10.0  and earlier allows an authenticated non-administrative attacker to bypass the Network Access Rules of a virtual gateway and reach denied hosts via wildcard additional destinations signed into the gateway token.

🎖@cveNotify

🚨 CVE-2026-114487
Missing authorization in the PAM AD computer import endpoint in Devolutions Server 2026.3.5.0 through 2026.3.10.0 and 2026.2.20.0 and earlier allows an authenticated non-administrative user with a PAM license to create PAM sub-providers under existing AD providers via a crafted import request.

🎖@cveNotify

🚨 CVE-2026-104068
JetBackup plugin for WordPress before 3.1.24.10 contains a symlink-based arbitrary file write vulnerability that allows an authenticated WordPress administrator to write attacker-controlled file contents outside the intended restore destination during backup import and restore. Attackers can craft a backup archive containing a symbolic link that archive extraction follows without validating targets or enforcing destination containment, potentially leading to server-side code execution depending on the writable destination and server configuration.

🎖@cveNotify

🚨 CVE-2026-114605
dnspython is a DNS toolkit for Python. Prior to 2.9.0, dns.name.from_wire_parser follows attacker-controlled DNS compression pointer chains without a hop limit. A malicious DNS wire-format message can force excessive pointer traversal during name decompression, causing high CPU use, application degradation, or denial of service in applications that process untrusted DNS messages. This issue is fixed in version 2.9.0.

🎖@cveNotify

🚨 CVE-2026-114606
draw.io Desktop is the official Electron build of draw.io. Prior to 31.4.4, draw.io Desktop is vulnerable to arbitrary local-file disclosure through the Electron main process's read-side IPC handlers. The readFile, getFileDrafts, getBkpFile, fileStat, isFileWritable, checkFileExists, and watchFile actions operate on a renderer-chosen filesystem path with no blessed-path (assertWritablePath) authorization. The only gates are validateSender — a URL-prefix origin check — plus, for readFile alone, a content "sniff" and a lexical appBaseDir prefix block. The write-side handlers (saveFile, writeFile, saveDraft, deleteFile) are all protected by assertWritablePath; the read side is not. The result is a read/write authorization asymmetry: any frame executing in the app's file:// origin can read the contents of local files that the same origin is explicitly forbidden to write. This issue is fixed in version 31.4.4.

🎖@cveNotify

🚨 CVE-2026-114607
Better Auth is an authentication and authorization library for TypeScript. From 1.4.0-beta.18 until 1.7.7, deployments that enable Magic Link with storeToken set to plain, or with storeToken set to hashed and the global verification.storeIdentifier setting also set to hashed, enable a built-in social or Generic OAuth provider, and use account.storeStateStrategy set to database can accept an OAuth sign-in state value as a Magic Link token. These settings can cause Magic Link verification records and OAuth state to resolve to the same stored identifier, allowing an unauthenticated attacker to start OAuth sign-in for a known email address and redeem the returned state through Magic Link without controlling the mailbox or completing the provider callback. The attacker can obtain a normal session for an existing user, or create an account incorrectly marked as email verified when sign-up is enabled. This issue is fixed in version 1.7.7.

🎖@cveNotify

🚨 CVE-2026-114608
Pylint is a static code analyser for Python. From 0.15.2 until 4.0.9, Pylint stores module statistics in predictable files under PYLINT_HOME and loads those files with pickle.load on a later run. An attacker who can write to a shared, group-writable, or otherwise untrusted cache directory can replace a stats cache with crafted serialized data, causing arbitrary code to execute with the privileges of the user who next runs Pylint. The default per-user cache is not normally writable by another user. This issue is fixed in version 4.0.9.

🎖@cveNotify

🚨 CVE-2026-115416
Incorrect authorization checks in Amazon Athena engine version 3 query processing could have allowed an authenticated user to read AWS account identifiers and SQL statement text query metadata from other AWS accounts. Query results, and data stored in Amazon S3 or other data sources, were not accessible through this issue.



AWS remediated the issue on October 7, 2026. No customer action is required.

🎖@cveNotify

🚨 CVE-2026-115502
A missing authorization check allows anyone having access to a "link without login" for a DataApp to list and potentially access jobs of other users created by the same link in KNIME Business Hub prior to 1.19.0. As workaround remove all "links without login" to DataApps.

🎖@cveNotify