🚨 CVE-2026-89410
In Z-Wave SDK 8.1.1 and earlier, a malformed NCP SPI command can trigger out-of-bounds reads that leak sensitive information.

🎖@cveNotify

🚨 CVE-2026-94502
In EmberZNet 9.1.1 and earlier, a malformed Publish Price Matrix command can result in an out-of-bounds write potentially leading to remote code execution. These messages must come from a device that has already joined the network. Only devices supporting the Price Cluster are impacted.

🎖@cveNotify

🚨 CVE-2026-111181
body-parser is body parsing middleware for Node.js and Express. In versions before 1.20.9 and in versions from 2.0.0 before 2.4.0, a single request can crash any application using body-parser with default options. When a request carries a Content-Encoding such as gzip, body-parser pipes it into a decompression stream and, after reading the body, leaves that stream with no error listener. A payload of one valid compressed frame followed by trailing bytes decodes and the application responds normally, but the trailing bytes then reach the already-finished decoder, which emits an error that is re-thrown as an uncaught exception and terminates the process. No matching route is required because body parsing runs before routing, so any endpoint that parses a body is affected. The issue is fixed in body-parser 2.4.0 and 1.20.9, and users should upgrade to one of those versions or later. As a workaround, disable request-body inflation (set the body-parser inflate option to false) so encoded requests are rejected before any decompression stream is created.

🎖@cveNotify

🚨 CVE-2026-113872
multer is a middleware for Node.js that handles multipart/form-data file uploads. In versions from 2.0.0 before 2.5.0, when multer is configured with an asynchronous fileFilter, a single request can crash the Node.js process. If the request is aborted while one file's asynchronous fileFilter is still pending, the pending callback later resumes a parsing stream that multer has already torn down, and the underlying parser emits an error on a stream that no longer has an error listener, which Node raises as an unhandled error event so the process exits. Any application using multer with an asynchronous fileFilter is affected regardless of storage engine, while uploads using a synchronous fileFilter are not affected. The issue is fixed in multer 2.5.0, and users should upgrade to 2.5.0 or later. As a workaround, use a synchronous fileFilter.

🎖@cveNotify

🚨 CVE-2020-21012
Sourcecodester Hotel and Lodge Management System 2.0 is vulnerable to unauthenticated SQL injection and can allow remote attackers to execute arbitrary SQL commands via the email parameter to the edit page for Customer, Room, Currency, Room Booking Details, or Tax Details.

🎖@cveNotify

🚨 CVE-2026-63832
In the Linux kernel, the following vulnerability has been resolved:

wifi: mt76: add wcid publish check in mt76_sta_add

Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add
to avoid reinitializing the wcid->poll_list.

Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4.
According to the corruption information, prev->next was changed to itself.

wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2
wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b)
wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3)
slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192
list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040).

mt76_wcid_add_poll+0x95/0xd0 [mt76]
mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common]
mt7925_rx_check+0xa7/0xc0 [mt7925_common]
mt76_dma_rx_poll+0x50d/0x790 [mt76]
mt792x_poll_rx+0x52/0xe0 [mt792x_lib]

🎖@cveNotify

🚨 CVE-2026-53959
4gaBoards is a boards system for realtime project management. Prior to 3.3.9, 4gaBoards allows any authenticated user to enumerate account information for every user through GET /api/users and retrieve arbitrary accounts through GET /api/users/:id. The users/index and users/show actions rely only on the default is-authenticated policy in server/config/policies.js, and server/api/controllers/users/index.js returns the result of sails.helpers.users.getMany() without requester-specific authorization or response sanitization. Responses expose email, phone, organization, name, isAdmin, ssoGoogleEmail, ssoGithubEmail, and other SSO-linked email fields, including data for administrators. This enables instance-wide user enumeration, privacy loss, and targeted phishing reconnaissance. This issue is fixed in version 3.3.9.

🎖@cveNotify

🚨 CVE-2026-62289
libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.0 and earlier, a crafted HEIF or AVIF file containing a clean aperture box can reduce an image dimension to zero and crash or corrupt tiling results when heif_image_handle_get_image_tiling(handle, 1, &tiling) is called. ImageItem::get_heif_image_tiling() returns already transformed dimensions, and process_image_transformations_on_tiling() applies the clean aperture transformation again. The second application passes zero to Box_clap::left_rounded(0), where image_width minus one underflows and constructs Fraction(0xFFFFFFFF, 2). Debug builds reach an assertion and abort, while release builds can return a corrupt crop and zero-width tiling result. The affected implementation spans libheif/image-items/image_item.cc, libheif/context.cc, and libheif/box.cc. This issue is fixed in version 1.23.1.

🎖@cveNotify

🚨 CVE-2026-62291
libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.0 and earlier, a crafted image sequence with a 2x2 primary plane and a 256x256 auxiliary alpha plane can cause attacker-controlled heap corruption during a normal decode and re-encode workflow. Track_Visual::decode_next_image_sample() calls transfer_channel_from_image_as() without checking that the auxiliary alpha dimensions match the main frame. The resulting inconsistent image reaches heif_track_decode_next_image() and then heif_context_encode_image(). In unc_encoder::encode(), unc_encoder_component_interleave::encode_tile() sizes its buffer with compute_tile_data_size_bytes() using the primary dimensions but copies each component using its actual plane dimensions. The oversized alpha plane is therefore copied beyond the allocation, causing an out-of-bounds write; the inverse size mismatch can also produce an out-of-bounds read. This issue is fixed in version 1.23.1.

🎖@cveNotify

🚨 CVE-2026-62292
libheif is a HEIF and AVIF file format decoder and encoder. From 1.19.0 until 1.23.1, a crafted uncompressed HEIF image using generic zlib unci full-item compression can crash an application that decodes an advertised tile with heif_image_handle_decode_image_tile(). In libheif/codecs/uncompressed/unc_decoder.cc, unc_decoder::fetch_tile_data() computes a large tile offset and unc_decoder::get_compressed_image_data_uncompressed() validates it with range_start_offset plus range_size. For the last advertised tile (4095, 4095), the addition can wrap to zero, bypass the bounds check, and pass an invalid source pointer and a one-terabyte length to memcpy. The observed result is an out-of-bounds read and process crash; opening the file alone does not trigger the issue because tile decoding is required. This issue is fixed in version 1.23.1.

🎖@cveNotify

🚨 CVE-2026-62377
libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.0 and earlier, a crafted HEIF sequence accepted by heif_context_read_from_memory() can leave the context with no registered sequence tracks and crash when heif_context_get_track(ctx, 0) is called. HeifContext::get_track() in libheif/context.cc executes assert(has_sequence()) before its normal error handling, so assert-enabled builds abort instead of allowing the public wrapper in libheif/api/libheif/heif_sequences.cc to return null. In release builds, removing the assertion lets the track_id zero path dereference m_tracks.begin()->second on an empty map, which is undefined behavior and typically crashes. The issue is reachable through documented public APIs after parsing attacker-controlled bytes. This issue is fixed in version 1.23.1.

🎖@cveNotify

🚨 CVE-2026-66602
Cross-Site Request Forgery (CSRF) vulnerability in DevItems HashBar – WordPress Notification Bar allows Cross Site Request Forgery.

This issue affects HashBar – WordPress Notification Bar: from n/a through 2.0.0.

🎖@cveNotify

🚨 CVE-2026-66603
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in David Artiss Draft List simple-draft-list allows Stored XSS.

This issue affects Draft List: from n/a through 2.6.4.

🎖@cveNotify

🚨 CVE-2026-73973
Linuxfabrik Monitoring Plugins provides monitoring plugins for Icinga, Nagios, and related systems. Prior to version 7.0.0, check-plugins/logfile/logfile accepted a free-form --filename path and opened it as root when invoked through the shipped nagios or icinga sudoers allowlist, without confining the resolved path to /var/log. An attacker who controls the monitoring account can select a root-readable file such as /etc/shadow and use --warning-regex . while leaving SUPPRESS_OUTPUT false, causing each nonempty line to be collected in warn_matches and returned through lib.base.oao(). The vulnerable flow passes the expanded scan_path directly to open(), and neither real-path containment nor an allowlist protects the sink. The same fix also confines mysql-logfile and openvpn-client-list paths, allows only documented log roots, and resolves symlinks and parent-directory traversal before checking containment. This issue is fixed in version 7.0.0.

🎖@cveNotify

🚨 CVE-2026-27365
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in PublishPress PublishPress Series allows Stored XSS.

This issue affects PublishPress Series: from n/a through 2.17.0.

🎖@cveNotify

🚨 CVE-2026-66589
Missing Authorization vulnerability in Kings Plugins B2BKing allows Exploiting Incorrectly Configured Access Control Security Levels.

This issue affects B2BKing: from n/a through 5.2.30.

🎖@cveNotify

🚨 CVE-2026-66591
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in David Lingren Media LIbrary Assistant allows Stored XSS.

This issue affects Media LIbrary Assistant: from n/a through 3.39.

🎖@cveNotify

🚨 CVE-2026-75976
A weakness has been identified in TRENDnet TEW-823DRU 1.1.02b01. Impacted is the function strcpy of the file /cgi-bin/wan.cgi of the component NVRAM. This manipulation of the argument wan_l2tp_password causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

🎖@cveNotify

🚨 CVE-2026-75978
A security vulnerability has been detected in xianrendzw EasyReport up to 2.0.17.0522_Beta. The affected element is the function DataSourceController.add of the file DataSourceController.java of the component QueryerFactory. Such manipulation of the argument queryerClass leads to permission issues. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-75979
A vulnerability was found in xianrendzw EasyReport up to 2.0.17.0522_Beta. Affected is the function execSqlText/previewSqlText of the file DesignerController.java of the component SQL Preview Endpoint. The manipulation of the argument sqlText results in improper neutralization of special elements used in a template engine. The attack can be executed remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-75984
A vulnerability was detected in TRENDnet TEW-823DRU 1.1.02b01. Impacted is an unknown function of the file /cgi-bin/admin.cgi. The manipulation of the argument Hostname results in command injection. The attack can be launched remotely. The exploit is now public and may be used.

🎖@cveNotify