🚨 CVE-2026-103061
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in gleam-lang gleam allows a malicious package publisher to delete a directory outside the project's build directory when a developer builds a project.

A Hex package release's metadata carries an app field with the release's OTP application name. Gleam reads this field from the hex.pm release API when it downloads dependencies and uses it as the package's build directory name without validating it (hex_manifest_package in compiler-cli/src/dependencies.rs, ProjectPaths::build_directory_for_package). When a dependency fails to compile, Gleam deletes that directory with remove_dir_all. hex.pm didn't restrict the field to a directory name before 2026-10-12, so a publisher could set it to a value such as ../../../../target or an absolute path. When a project depends on such a release directly or transitively and the release fails to compile, gleam build, gleam check, gleam run, gleam test or gleam export deletes the directory the name resolves to. For a pure Gleam package no publisher code runs.

This issue affects gleam: from 0.32.4 before 1.19.2.

🎖@cveNotify

🚨 CVE-2026-104355
A connected peer cluster can modify a Temporal Server cluster's local namespaces, which are never replicated to that peer, because the receiving cluster applies inbound namespace replication updates to them. In a multi-cluster deployment, each cluster pulls replication tasks from the remote clusters an administrator has registered with connection enabled; the sending side excludes local namespaces, but the receiving side does not apply the same rule. When an inbound task names an existing namespace, the server checks at most that the namespace identifiers match, then overwrites its state, description, owner, retention, archival settings, and cluster list, and its active cluster when the task carries a higher failover version, without checking that the namespace is global. A party that controls a registered peer's replies, by operating or compromising it, can therefore change any local namespace whose name and identifier it can supply, without any credential on the receiving cluster: for example, marking it Deprecated, making the peer its active cluster, and shortening its retention, after which new Workflow starts in that namespace fail. Local namespaces include the built-in temporal-system namespace. Namespace metadata the History service refreshes from the peer while processing its history replication tasks passes through the same logic. A cluster with no remote cluster registered with connection enabled is not exposed.

🎖@cveNotify

🚨 CVE-2026-89140
Temporal Server does not bind internal completion callbacks to the namespace that attached them, which allows an authenticated caller with write permission in one namespace to alter Scheduler V2 schedule state in another namespace. The callback address temporal://internal is reserved for callbacks that Scheduler V2 attaches to the Workflows it starts. In affected releases, any authenticated caller could attach a callback with that address to a Workflow start request, the address was exempt from the component.callbacks.allowedAddresses allowlist, and the History service delivered the callback to the component its token named, in whatever namespace that was, without authorizing the original caller there. When the forged completion matches an action a target schedule is running, the schedule records the action as completed while its Workflow still runs, which can defeat an overlap policy such as SKIP, and passes caller-controlled data to the next scheduled Workflow as its last completion result. A forged failure may also pause a schedule configured to pause on failure. A forgery requires the target namespace identifier, the schedule identifier, and the identity and timing of a running action. No disclosure of Workflow payloads or history was identified. Only namespaces that hold Scheduler V2 schedules can be targeted; Scheduler V2 is off by default, and existing Scheduler V2 schedules remain targets after the settings that create them are turned off.

🎖@cveNotify

🚨 CVE-2026-108924
A vulnerability was identified in getkirby Kirby up to 4.9.5/5.5.3. Affected by this issue is the function OptionsQuery::resolve of the file src/Option/OptionsQuery.php of the component Dynamic Option Generation. The manipulation leads to authorization bypass. The attack is possible to be carried out remotely. Upgrading to version 4.9.6 and 5.6.0 can resolve this issue. You should upgrade the affected component.

🎖@cveNotify

🚨 CVE-2026-109425
Tink-go (tink-crypto/tink-go) through 2.8.0 contains an input-validation vulnerability where keyset.NewHandleWithNoSecrets() and ReadWithNoSecrets() skip the structural Validate() step before constructing a keyset.Handle, allowing malformed public or no-secret keysets that violate Tink's keyset invariants to be accepted. Attackers can supply a malformed keyset, such as one with an enabled public key lacking a valid primary key or a DESTROYED key with no KeyData, causing inconsistent downstream validation where functions like jwt.JWKSetFromPublicKeysetHandle() process the invalid handle and produce a JWK set, potentially misleading applications that rely on successful handle construction as proof of keyset integrity.

🎖@cveNotify

🚨 CVE-2026-108929
A flaw has been found in Netcore NR268 1.7.121109. The affected element is the function execvp of the file /router/DDNSset.cgi of the component DDNS. Executing a manipulation of the argument Hostname can lead to argument injection. The attack can be launched remotely.

🎖@cveNotify

🚨 CVE-2026-92116
OAuth1 callback validation vulnerability in Apache Allura.



This issue affects Apache Allura: through 1.21.0.



Users are recommended to upgrade to version 1.22.0, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-92119
REST API Mass Assignment vulnerability in Apache Allura.



This issue affects Apache Allura: through 1.21.0.



Users are recommended to upgrade to version 1.22.0, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-92120
OAuth1 Request Replay Attack vulnerability in Apache Allura.



This issue affects Apache Allura: through 1.21.0.



Users are recommended to upgrade to version 1.22.0 which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-108933
A vulnerability was identified in Edimax BR-6208AC 1.32. Affected is an unknown function of the file /goform/formFilter. Such manipulation leads to cross site scripting. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-92876
IBM Maximo Application Suite - IoT Component 9.2.0, 9.1.0, and 9.0.0 could allow a remote attacker to cause a denial of service due to uncontrolled recursion.

🎖@cveNotify

🚨 CVE-2026-109595
Hugo from v0.84.0 before v0.167.0 contains a path traversal vulnerability that allows malicious themes or modules to read files outside the project root via ESBuild's fallback resolver in js.Build, js.Batch, and css.Build. Attackers can ship relative imports or symlinks pointing outside the project to bundle any file readable by the build user into published JavaScript or CSS output.

🎖@cveNotify

🚨 CVE-2026-101020
An incorrect permission assignment for critical resource issue exists in AssetView, AssetView CLOUD, and AssetView Cloud +. If this vulnerability is exploited, a local authenticated attacker who can log in to the Windows system where Management Console or Client Terminal for the product is running may gain SYSTEM privileges.

🎖@cveNotify

🚨 CVE-2026-109143
A vulnerability was determined in calcom cal.com and cal.diy up to 6.2.0. This vulnerability affects the function credentials.delete of the file /api/trpc/credentials/delete of the component Credentials Handler. This manipulation of the argument teamId causes improper privilege management. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-89309
The authorization middleware of the WMS MobileServer
fails to require authentication in two distinct cases. First, it
only requires an Authorization header for GET and HEAD requests; requests
using any other HTTP method are processed without an authentication check.
Second, for any HTTP method including GET and HEAD, a request carrying a
malformed or non-bearer Authorization header is passed through without
a valid token being required.





The middleware does validate a token whenever a
well-formed one is present, but in these two cases it does not
require one. A remote attacker with network access to the service can
therefore invoke API functionality without valid credentials.

🎖@cveNotify

🚨 CVE-2026-109162
Forms using FileUpload or ImageUpload elements with a custom saveToFileMount configured stored uploaded files in the default storage folder 1:/user_upload/ instead of the configured destination. This could cause uploaded files to end up in a publicly accessible storage even though a restricted, non-public storage had been configured. Files stored this way are served directly, without the access checks applied to non-public storages. Forms that use the default value for saveToFileMount are not affected. This issue affects TYPO3 CMS versions 14.0.0-14.3.8.

🎖@cveNotify

🚨 CVE-2026-59241
A vulnerability has been identified in SIMATIC WinCC V7.5 (All versions), SIMATIC WinCC V8.0 (All versions < V8.0 Update 11), SIMATIC WinCC V8.1 (All versions < V8.1 Update 7). The affected application does not sufficiently restrict the permissions assigned to a database role.
This could allow an authenticated remote attacker with database access to escalate privileges and execute arbitrary commands on the host system where SIMATIC WinCC is installed, potentially leading to a compromise of the system.

🎖@cveNotify

🚨 CVE-2026-63354
Affected devices do not properly validate and sanitize visual marker data contained in imported CSV trace files before rendering it on the Trace page.

This could allow an attacker to social engineer an authorized user who holds the function right “Read diagnostics” into importing a specially crafted trace file. Successful exploitation could allow attacker-controlled JavaScript to execute in the user’s browser session and perform PLC operations through the web server within the scope of the user’s authorization.

🎖@cveNotify

🚨 CVE-2026-78556
A vulnerability has been identified in Industrial Edge App Publisher (All versions < V1.27.9). The affected software does not properly validate the server certificate when initiating a TLS connection. This allows an attacker to intercept and relay communication (Man-in-the-Middle attack) and to spoof a trusted entity by interfering in the communication path between the client and the intended server.

🎖@cveNotify

🚨 CVE-2026-89197
A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V6.0). Affected devices do not properly validate or sanitize input in the Value field of notification conditions processed during the Notification Profile configuration. This could allow an authenticated attacker with specific privileges to execute arbitrary SQL commands on the underlying database.

🎖@cveNotify

🚨 CVE-2026-89202
A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V6.0). Affected devices do not properly perform authorization checks for device disconnection requests. This could allow an authenticated attacker with minimal privileges to disconnect active sessions of other users, including administrators, leading to a denial of service.

🎖@cveNotify