🚨 CVE-2026-101290
A remote attacker may send a specially crafted network packet that causes the
affected application to perform an out-of-bounds memory read due to insufficient validation of
packet length. This may result in an application crash and a denial-of-service condition.
🎖@cveNotify
A remote attacker may send a specially crafted network packet that causes the
affected application to perform an out-of-bounds memory read due to insufficient validation of
packet length. This may result in an application crash and a denial-of-service condition.
🎖@cveNotify
🚨 CVE-2026-102461
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the uniqueItems keyword validation uses an O(n²) pairwise comparison loop with no short-circuit or size limit. A remote unauthenticated attacker can submit a moderately-sized JSON array that consumes disproportionate CPU time, leading to denial of service.
The impacted component is io.vertx:vertx-json-schema.
The following Vert.x modules depend on vertx-json-schema and are also affected:
io.vertx:vertx-web-openapi-router io.vertx:vertx-web-validation io.vertx:vertx-openapi
🎖@cveNotify
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the uniqueItems keyword validation uses an O(n²) pairwise comparison loop with no short-circuit or size limit. A remote unauthenticated attacker can submit a moderately-sized JSON array that consumes disproportionate CPU time, leading to denial of service.
The impacted component is io.vertx:vertx-json-schema.
The following Vert.x modules depend on vertx-json-schema and are also affected:
io.vertx:vertx-web-openapi-router io.vertx:vertx-web-validation io.vertx:vertx-openapi
🎖@cveNotify
GitHub
Quadratic complexity in JSON Schema uniqueItems validation
In `io.vertx:vertx-json-schema`, the `uniqueItems` keyword validation uses an O(n²) pairwise comparison loop with no short-circuit or size limit. A remote unauthenticated attacker can submit a mode...
🚨 CVE-2026-102462
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the TDS message decoder in the Vert.x MSSQL client (vertx-mssql-client) aggregates inbound TDS packets into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle SQL Server can send a continuous stream of TDS packets without setting the END_OF_MESSAGE status flag, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-mssql-client.
🎖@cveNotify
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the TDS message decoder in the Vert.x MSSQL client (vertx-mssql-client) aggregates inbound TDS packets into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle SQL Server can send a continuous stream of TDS packets without setting the END_OF_MESSAGE status flag, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-mssql-client.
🎖@cveNotify
GitHub
Denial of service via unbounded TDS message reassembly in Vert.x MSSQL client
The TDS message decoder in the Vert.x MSSQL client (`vertx-mssql-client`) aggregates inbound TDS packets into a composite direct-memory buffer without any cumulative size limit. A malicious, compro...
🚨 CVE-2026-102463
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the binary array decoder in vertx-pg-client (DataTypeCodec.binaryDecodeArray) allocates a Java array sized by a server-declared 32-bit dimension count with no upper bound. A malicious or compromised PostgreSQL server, or an on-path attacker intercepting an unencrypted connection, can send a crafted DataRow message with an excessively large array dimension value, causing the client to attempt a multi-gigabyte heap allocation and crash with an OutOfMemoryError.
The impacted component is io.vertx:vertx-pg-client.
🎖@cveNotify
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the binary array decoder in vertx-pg-client (DataTypeCodec.binaryDecodeArray) allocates a Java array sized by a server-declared 32-bit dimension count with no upper bound. A malicious or compromised PostgreSQL server, or an on-path attacker intercepting an unencrypted connection, can send a crafted DataRow message with an excessively large array dimension value, causing the client to attempt a multi-gigabyte heap allocation and crash with an OutOfMemoryError.
The impacted component is io.vertx:vertx-pg-client.
🎖@cveNotify
GitHub
Denial of service via unbounded array allocation in Vert.x PostgreSQL client
The binary array decoder in `vertx-pg-client` (`DataTypeCodec.binaryDecodeArray`) allocates a Java array sized by a server-declared 32-bit dimension count with no upper bound. A malicious or compro...
🚨 CVE-2026-102464
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Eclipse Vert.x MQTT (vertx-mqtt) MqttClient stores every inbound QoS 2 PUBLISH message received from the broker in an internal map (qos2inbound) while awaiting the corresponding PUBREL packet to complete the QoS 2 handshake. This map has no size limit; the maxInflightQueue option is enforced only on the outbound publish path and does not constrain inbound message retention.
A malicious or compromised MQTT broker can exploit this by sending QoS 2 PUBLISH messages with distinct packet identifiers and withholding the PUBREL responses. Each incomplete handshake causes the client to retain the full publish message (topic, payload, and metadata) indefinitely, leading to unbounded memory growth in the Vert.x process. This can degrade the MQTT-consuming application or cause out-of-memory termination.
The impacted component is io.vertx:vertx-mqtt.
🎖@cveNotify
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Eclipse Vert.x MQTT (vertx-mqtt) MqttClient stores every inbound QoS 2 PUBLISH message received from the broker in an internal map (qos2inbound) while awaiting the corresponding PUBREL packet to complete the QoS 2 handshake. This map has no size limit; the maxInflightQueue option is enforced only on the outbound publish path and does not constrain inbound message retention.
A malicious or compromised MQTT broker can exploit this by sending QoS 2 PUBLISH messages with distinct packet identifiers and withholding the PUBREL responses. Each incomplete handshake causes the client to retain the full publish message (topic, payload, and metadata) indefinitely, leading to unbounded memory growth in the Vert.x process. This can degrade the MQTT-consuming application or cause out-of-memory termination.
The impacted component is io.vertx:vertx-mqtt.
🎖@cveNotify
GitHub
Eclipse Vert.x MQTT client unbounded inbound QoS 2 message retention allows broker-driven denial of service
In Eclipse Vert.x MQTT (vertx-mqtt), the `MqttClient` stores every inbound QoS 2 PUBLISH message received from the broker in an internal map (qos2inbound) while awaiting the corresponding PUBREL pa...
🚨 CVE-2026-102466
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x MySQL client (vertx-mysql-client) pre-allocates an array for column definitions based on a server-declared column count with no upper-bound validation. A malicious or compromised MySQL server, or an attacker with man-in-the-middle positioning, can send a crafted result set packet with an extremely large column count, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Netty event loop thread, causing a complete denial of service for all connections and verticles in the Vert.x application.
The impacted component is io.vertx:vertx-mysql-client.
🎖@cveNotify
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x MySQL client (vertx-mysql-client) pre-allocates an array for column definitions based on a server-declared column count with no upper-bound validation. A malicious or compromised MySQL server, or an attacker with man-in-the-middle positioning, can send a crafted result set packet with an extremely large column count, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Netty event loop thread, causing a complete denial of service for all connections and verticles in the Vert.x application.
The impacted component is io.vertx:vertx-mysql-client.
🎖@cveNotify
GitHub
Denial of service via uncapped column count allocation in Vert.x MySQL client
The Vert.x MySQL client (`vertx-mysql-client`) pre-allocates an array for column definitions based on a server-declared column count with no upper-bound validation. A malicious or compromised MySQL...
🚨 CVE-2026-102469
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x DB2 client (vertx-db2-client) contains DRDA protocol handling code that deserializes User Defined Type (UDT) column data using a bare ObjectInputStream.readObject() call with no ObjectInputFilter or class allowlist.
This code path is triggered when a DRDA server sends a result set with a column tagged as UDT (FDOCA protocol LID 0x50). However, DB2 does not support this type of UDT. The FDOCA 0x50 type is never sent by a legitimate DB2 server.
Nevertheless, a malicious or man-in-the-middle DRDA server could craft a response with a 0x50-tagged column, causing the client to deserialize arbitrary attacker-controlled bytes on the Vert.x event loop before any application code can inspect or reject the data. If a Java deserialization gadget chain is present on the application's classpath, this enables remote code execution. Without a gadget chain, denial of service is possible via crafted object graphs. TLS is disabled by default, making man-in-the-middle exploitation feasible.
The impacted component is io.vertx:vertx-db2-client.
🎖@cveNotify
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x DB2 client (vertx-db2-client) contains DRDA protocol handling code that deserializes User Defined Type (UDT) column data using a bare ObjectInputStream.readObject() call with no ObjectInputFilter or class allowlist.
This code path is triggered when a DRDA server sends a result set with a column tagged as UDT (FDOCA protocol LID 0x50). However, DB2 does not support this type of UDT. The FDOCA 0x50 type is never sent by a legitimate DB2 server.
Nevertheless, a malicious or man-in-the-middle DRDA server could craft a response with a 0x50-tagged column, causing the client to deserialize arbitrary attacker-controlled bytes on the Vert.x event loop before any application code can inspect or reject the data. If a Java deserialization gadget chain is present on the application's classpath, this enables remote code execution. Without a gadget chain, denial of service is possible via crafted object graphs. TLS is disabled by default, making man-in-the-middle exploitation feasible.
The impacted component is io.vertx:vertx-db2-client.
🎖@cveNotify
GitHub
Unsafe Java deserialization of UDT column data in Vert.x DB2 client
The Vert.x DB2 client (`vertx-db2-client`) contains DRDA protocol handling code that deserializes User Defined Type (UDT) column data using a bare `ObjectInputStream.readObject()` call with no `Obj...
🚨 CVE-2026-102477
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], a gRPC endpoint does have a configurable per message maximum size in bytes, however the maximum size applies to the received bytes. When applied to a compressed message, this only applies to the compressed size and not the actual size of the uncompressed content. This can be used to force a gRPC endpoint to allocate more bytes than the value defined by the configuration, making the endpoint vulnerable to compression bomb attacks.
The impacted component is io.vertx:vertx-gprc-server.
🎖@cveNotify
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], a gRPC endpoint does have a configurable per message maximum size in bytes, however the maximum size applies to the received bytes. When applied to a compressed message, this only applies to the compressed size and not the actual size of the uncompressed content. This can be used to force a gRPC endpoint to allocate more bytes than the value defined by the configuration, making the endpoint vulnerable to compression bomb attacks.
The impacted component is io.vertx:vertx-gprc-server.
🎖@cveNotify
GitHub
gRPC compressed messages are only bounded by their compressed size, allowing compression bomb attacks
A gRPC endpoint does have a configurable per message maximum size in bytes, however the maximum size applies to the received bytes. When applied to a compressed message, this only applies to the co...
🚨 CVE-2026-103223
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the PostgreSQL message decoder reads the 4-byte message length field from the PostgreSQL wire protocol without any maximum validation. A malicious, compromised, or man-in-the-middle PostgreSQL server can send a message header with the length field set to an extremely large value (up to Integer.MAX_VALUE), causing the decoder to accumulate subsequent TCP data into a composite buffer without bound, leading to unbounded memory allocation on the client and an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-pg-client.
🎖@cveNotify
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the PostgreSQL message decoder reads the 4-byte message length field from the PostgreSQL wire protocol without any maximum validation. A malicious, compromised, or man-in-the-middle PostgreSQL server can send a message header with the length field set to an extremely large value (up to Integer.MAX_VALUE), causing the decoder to accumulate subsequent TCP data into a composite buffer without bound, leading to unbounded memory allocation on the client and an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-pg-client.
🎖@cveNotify
GitHub
Denial of Service via Spoofed Message Length in Vert.x PostgreSQL Client
The PostgreSQL message decoder in the Vert.x PostgreSQL client (`vertx-pg-client`) reads the 4-byte message length field from the PostgreSQL wire protocol without any maximum validation. A maliciou...
🚨 CVE-2026-103224
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the MySQL message decoder aggregates inbound multi-packet payloads into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle MySQL server can send a continuous stream of packets with the maximum payload length (0xFFFFFF), preventing the end-of-message condition from being reached, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-mysql-client.
🎖@cveNotify
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the MySQL message decoder aggregates inbound multi-packet payloads into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle MySQL server can send a continuous stream of packets with the maximum payload length (0xFFFFFF), preventing the end-of-message condition from being reached, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-mysql-client.
🎖@cveNotify
GitHub
Denial of Service via Unbounded Multi-Packet Reassembly in Vert.x MySQL Client
The MySQL message decoder in the Vert.x MySQL client (`vertx-mysql-client`) aggregates inbound multi-packet payloads into a composite direct-memory buffer without any cumulative size limit. A malic...
🚨 CVE-2026-104617
There are two invocations of `qrencode` to display a QR code for scanning. These invocations leak the private data $pin / $key via /proc accessible for arbitrary low-privileged users in the system.
🎖@cveNotify
There are two invocations of `qrencode` to display a QR code for scanning. These invocations leak the private data $pin / $key via /proc accessible for arbitrary low-privileged users in the system.
🎖@cveNotify
🚨 CVE-2026-104618
On request the `sdbootutil` script creates a world-readable debug log in /var/log/sdbootutil.log. The log file is created world-readable, however, which means that arbitrary low-privileged users in the system will be able to extract secrets from it.
🎖@cveNotify
On request the `sdbootutil` script creates a world-readable debug log in /var/log/sdbootutil.log. The log file is created world-readable, however, which means that arbitrary low-privileged users in the system will be able to extract secrets from it.
🎖@cveNotify
🚨 CVE-2026-105271
"ゲオアプリ" provided by GEO CORPORATION contains an issue with cleartext storage of sensitive information, which may allow an attacker to obtain the password of a user of the affected application.
🎖@cveNotify
"ゲオアプリ" provided by GEO CORPORATION contains an issue with cleartext storage of sensitive information, which may allow an attacker to obtain the password of a user of the affected application.
🎖@cveNotify
🚨 CVE-2026-109855
undici is an HTTP client library for Node.js. In versions 8.11.0 and 8.11.1, its experimental WebSocket client, which is enabled by default when HTTP/2 is allowed, mishandles a failed WebSocket handshake over HTTP/2: the request is already marked completed, so the abort becomes a no-op and the underlying HTTP/2 stream is left open with no error listener. When a malicious server then destroys the connection, the orphaned stream emits an unhandled error and the Node.js process exits. A remote, unauthenticated server can therefore crash any client that opens a WebSocket to it over HTTP/2, resulting in a denial of service. The issue is fixed in undici 8.11.2, and users should upgrade to 8.11.2 or later. As a workaround, set allowH2 to false to disable HTTP/2 for WebSocket connections, or avoid opening WebSocket connections to untrusted servers.
🎖@cveNotify
undici is an HTTP client library for Node.js. In versions 8.11.0 and 8.11.1, its experimental WebSocket client, which is enabled by default when HTTP/2 is allowed, mishandles a failed WebSocket handshake over HTTP/2: the request is already marked completed, so the abort becomes a no-op and the underlying HTTP/2 stream is left open with no error listener. When a malicious server then destroys the connection, the orphaned stream emits an unhandled error and the Node.js process exits. A remote, unauthenticated server can therefore crash any client that opens a WebSocket to it over HTTP/2, resulting in a denial of service. The issue is fixed in undici 8.11.2, and users should upgrade to 8.11.2 or later. As a workaround, set allowH2 to false to disable HTTP/2 for WebSocket connections, or avoid opening WebSocket connections to untrusted servers.
🎖@cveNotify
cna.openjsf.org
Security Advisories | OpenJS Foundation CVE Numbering Authority
The OpenJS Foundation's CVE Numbering Authority (CNA)
🚨 CVE-2026-16436
Weak Password Recovery Mechanism for Forgotten Password vulnerability in Mitsubishi Electric GENESIS versions 11.03 and prior, GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, IoTWorX 10.97.3 and prior, MC Works64 all versions, GENESIS32 all versions, BizViz all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS versions 11.03 and prior, GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, IoTWorX 10.97.3 and prior, GENESIS32 all versions, and BizViz all versions allows a remote attacker to unlock the system by obtaining the challenge response by some means. The challenge response used to unlock the system is common to all users and fixed. As a result, the attacker may disclose, tamper with, destroy, or delete internal information, or cause the affected system to enter a denial-of-service (DoS) condition.
🎖@cveNotify
Weak Password Recovery Mechanism for Forgotten Password vulnerability in Mitsubishi Electric GENESIS versions 11.03 and prior, GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, IoTWorX 10.97.3 and prior, MC Works64 all versions, GENESIS32 all versions, BizViz all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS versions 11.03 and prior, GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, IoTWorX 10.97.3 and prior, GENESIS32 all versions, and BizViz all versions allows a remote attacker to unlock the system by obtaining the challenge response by some means. The challenge response used to unlock the system is common to all users and fixed. As a result, the attacker may disclose, tamper with, destroy, or delete internal information, or cause the affected system to enter a denial-of-service (DoS) condition.
🎖@cveNotify
🚨 CVE-2026-16438
Incorrect Privilege Assignment vulnerability in Mitsubishi Electric GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, MC Works64 all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, and MobileHMI 10.97.3 and prior allows an attacker who can log in using the same administrator account for the affected products to launch and operate DCOM objects locally or remotely. During installation, the installers of the affected products unnecessarily grant default DCOM permissions to the administrator account of the affected products. Users with that administrator accounts can locally or remotely launch and operate DCOM objects that should require UAC elevation. As a result, the attacker may disclose, tamper with, destroy, or delete internal information, or cause the affected system to enter a denial-of-service (DoS) condition.
🎖@cveNotify
Incorrect Privilege Assignment vulnerability in Mitsubishi Electric GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, MC Works64 all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, and MobileHMI 10.97.3 and prior allows an attacker who can log in using the same administrator account for the affected products to launch and operate DCOM objects locally or remotely. During installation, the installers of the affected products unnecessarily grant default DCOM permissions to the administrator account of the affected products. Users with that administrator accounts can locally or remotely launch and operate DCOM objects that should require UAC elevation. As a result, the attacker may disclose, tamper with, destroy, or delete internal information, or cause the affected system to enter a denial-of-service (DoS) condition.
🎖@cveNotify
🚨 CVE-2026-18661
In Eclipse Jetty, across various versions of `jetty-annotations`, and `jetty-eeN-annotations`, the Jakarta Spec authoritative url-pattern rules for mixed `@ServletSecurity` annotation, and `web.xml` defined `security-constraint` on the same `url-pattern` were not being applied if the `web.xml` had more than 1 `url-pattern` for a servlet, and had a `security-constraint` applying to only some of those `url-pattern` definitions.
🎖@cveNotify
In Eclipse Jetty, across various versions of `jetty-annotations`, and `jetty-eeN-annotations`, the Jakarta Spec authoritative url-pattern rules for mixed `@ServletSecurity` annotation, and `web.xml` defined `security-constraint` on the same `url-pattern` were not being applied if the `web.xml` had more than 1 `url-pattern` for a servlet, and had a `security-constraint` applying to only some of those `url-pattern` definitions.
🎖@cveNotify
🚨 CVE-2026-35088
Slican telephone exchanges use symmetric encryption for TCP/IP communication. Secret key is hardcoded in multiple binary files. An attacker who has access to these files can decrypt the communication.
This issue was fixed in IPx series version 6.62.0100.
The issue STILL EXISTS in End-Of-Life telephone exchanges:
- CCT-1668 (CCT1CPU)
- MAC-6400
- CXS-0424
These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading.
🎖@cveNotify
Slican telephone exchanges use symmetric encryption for TCP/IP communication. Secret key is hardcoded in multiple binary files. An attacker who has access to these files can decrypt the communication.
This issue was fixed in IPx series version 6.62.0100.
The issue STILL EXISTS in End-Of-Life telephone exchanges:
- CCT-1668 (CCT1CPU)
- MAC-6400
- CXS-0424
These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading.
🎖@cveNotify
cert.pl
Podatności w centralach telefonicznych Slican
W centralach telefonicznych Slican wykryto 3 podatności różnego typu (CVE-2026-35088, CVE-2026-63314 oraz CVE-2026-63315)
🚨 CVE-2026-63314
WebCTI service for Slican IPx telephone exchanges is vulnerable to SQL Injection in /webcti/admin_json.php enpoint. Improper neutralization of input allows an authenticated attacker to execute SQL Injection attacks.
This issue was fixed in IPx series version 6.62.0100.
🎖@cveNotify
WebCTI service for Slican IPx telephone exchanges is vulnerable to SQL Injection in /webcti/admin_json.php enpoint. Improper neutralization of input allows an authenticated attacker to execute SQL Injection attacks.
This issue was fixed in IPx series version 6.62.0100.
🎖@cveNotify
cert.pl
Podatności w centralach telefonicznych Slican
W centralach telefonicznych Slican wykryto 3 podatności różnego typu (CVE-2026-35088, CVE-2026-63314 oraz CVE-2026-63315)
🚨 CVE-2026-63315
WebCTI service for Slican IPx telephone exchanges stores temporary subscriber password in plaintext. An attacker with access to the database can obtain the user's password and log in to the subscriber's account.
This issue was fixed in IPx series version 6.62.0100.
🎖@cveNotify
WebCTI service for Slican IPx telephone exchanges stores temporary subscriber password in plaintext. An attacker with access to the database can obtain the user's password and log in to the subscriber's account.
This issue was fixed in IPx series version 6.62.0100.
🎖@cveNotify
🚨 CVE-2026-72528
"Handmade Marketplace App - Creema" provided by CREEMA LTD. contains an open redirect vulnerability. When accessing a specially crafted URL, a website set up by the attacker may be displayed within the app's screen of a user. As a result, the user may become a victim of a phishing attack.
🎖@cveNotify
"Handmade Marketplace App - Creema" provided by CREEMA LTD. contains an open redirect vulnerability. When accessing a specially crafted URL, a website set up by the attacker may be displayed within the app's screen of a user. As a result, the user may become a victim of a phishing attack.
🎖@cveNotify
App Store
Creema（クリーマ）- ハンドメイドマーケットプレイスアプリ - App Store
Creema Inc.の「Creema（クリーマ）- ハンドメイドマーケットプレイス」をApp Storeでダウンロードしてください。スクリーンショット、評価とレビュー、ユーザのヒント、「Creema（クリーマ）- ハンドメイドマーケットプレイス」に似たゲームを見ることなどができます。