🚨 CVE-2026-87680
A command injection vulnerability in the REST API management interface of Brocade Fabric OS versions before 10.0.1 allows an authenticated user to execute arbitrary system commands via crafted input parameters.

🎖@cveNotify

🚨 CVE-2026-87681
An Access Control Bypass vulnerability exists in the Role-Based Access Control (RBAC) validation engine of Brocade Fabric OS versions before 10.0.1. When processing certain management protocol operations, the RBAC engine incorrectly categorizes non-standard action opcodes during permission checks. This allows authenticated users with read-only management privileges to bypass access controls and execute restricted administrative operations.

🎖@cveNotify

🚨 CVE-2026-95386
TTL file parser infinite loop in 4.6.0 to 4.6.8 allows denial of service

🎖@cveNotify

🚨 CVE-2026-95387
SPDY protocol dissector crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service

🎖@cveNotify

🚨 CVE-2026-95388
Sharkd utility crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service

🎖@cveNotify

🚨 CVE-2026-95389
SCTP protocol dissector crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service

🎖@cveNotify

🚨 CVE-2026-95390
PEAK CAN TRC file parser crash in 4.6.0 to 4.6.8 allows denial of service

🎖@cveNotify

🚨 CVE-2026-95391
ZigBee ZCL protocol dissector crash in 4.6.0 to 4.6.8 allows denial of service

🎖@cveNotify

🚨 CVE-2026-95392
MBIM protocol dissector crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service

🎖@cveNotify

🚨 CVE-2026-95393
CSN.1 protocol dissector crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service

🎖@cveNotify

🚨 CVE-2026-95394
Microsoft Network Monitor file parser large loop in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service

🎖@cveNotify

🚨 CVE-2026-95395
IEEE C37.118 Synchrophasor protocol dissector memory leak in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service

🎖@cveNotify

🚨 CVE-2026-84782
Issue summary: The DTLS retransmission logic does not correctly handle
a handshake message write that is suspended part-way through.
The retransmitted message can be read past the message buffer and
the retransmission overwrites the internal state the suspended write
needs to resume correctly.

Impact summary: The retransmitted message can disclose a heap memory
to the peer as plaintext handshake data or cause a crash and a Denial
of Service when the read reaches an unmapped memory region.

CWE: CWE-125: Out-of-bounds Read

Description: DTLS handshake messages can be written out in multiple
fragments, and a write can suspend mid-message (returning WANT_WRITE)
if the underlying transport temporarily cannot accept more data. While
such a write is suspended, the DTLS retransmission timer may
independently fire and ask the retransmission logic to resend an
earlier, already-acknowledged-as-sent message from its retransmit
queue.

The retransmission logic reused the same internal buffer and position
tracking as the message that was still being written, without
resetting the position back to the start of the message being
retransmitted. As a result the retransmission was read starting from
wherever the suspended write had left off, producing a mislabelled
message whose body was leftover bytes from the other, larger message
still in flight - content that was never meant to be sent at that
point, and which could run past the end of the allocated buffer.

Separately, even when the retransmission is positioned correctly,
allowing it to run to completion while another write is suspended
overwrites the same shared bookkeeping that the suspended write
depends on to resume. When the application later resumes the
suspended write (via a subsequent SSL_read(), SSL_write(),
SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a
state inconsistent with the message and aborts the process in
a debugging build.

The fix resets the retransmission's read position to the start of the
message before resending, and skips retransmission entirely whenever a
handshake write is still suspended, deferring to the next call that
resumes it instead.

FIPS impact: no
The affected code is outside the FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-84783
Issue summary: The first concurrent use of the same X.509 certificate by
several threads may cause its cached extension data to be freed while
another thread is still using it.

Impact summary: A remote, unauthenticated peer could crash a multi-threaded
TLS client, or a multi-threaded TLS server that requests client
certificates, if the first certificate chains built to the same trusted CA
certificate are built by several connections at the same time. This is a
use-after-free read, which is likely to crash the process, resulting in a
Denial of Service.

CWE: CWE-416: Use After Free

Description: OpenSSL caches the decoded values of a certificate's X.509v3
extensions inside the X509 object the first time they are needed. In
OpenSSL 4.0 this cache is built in two phases: the extension values are
computed while holding a read lock on the certificate, and the results are
then installed into the certificate under a write lock. Because a read lock
does not exclude other readers, several threads can compute the cache for
the same certificate at the same time. Each thread that subsequently
acquires the write lock installs its own results and frees the values
installed by the thread before it, even though that earlier thread has
already marked the cache as complete and may have returned pointers into it
to its caller. A caller still using those pointers then reads freed memory.

Any certificate shared between threads is exposed the first time its
extensions are decoded. In TLS the certificates at risk are the trusted CA
certificates supplied for chain verification, by whatever means, since these
are shared by every connection and their extensions are decoded and cached
the first time a chain is built to them. Certificates sent by the peer are
decoded separately for each connection and are not shared, so they are not
affected. In a TLS client verifying server certificates, or a TLS server
that requests and verifies client certificates, the use-after-free could
only occur if the first chains built to the same trusted CA are built by
several connections at the same time.

FIPS impact: no
The FIPS module is not affected as X.509 certificate handling is outside
of the OpenSSL FIPS module boundary.

OpenSSL 4.0 is vulnerable to this issue.

OpenSSL 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are not affected by this issue.

OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.

This issue was reported on 27 August 2026 by Tim Becker (Xint.io) and
independently in a public report on 31 August 2026 by aydinmercan.

The fix has been developed by Bob Beck.

-- cut (non-publishing metadata for internal use) --
Reported by: Tim Becker (Xint.io), aydinmercan
Fixed by: Bob Beck

🎖@cveNotify

🚨 CVE-2026-84784
Issue summary: A malicious remote peer may flood the local QUIC
stack with NEW_CONNECTION_ID frames by avoiding a limit check on
how many connection IDs the remote QUIC stack can use.

Impact summary: The local QUIC stack sends a RETIRE_CONN_ID frame
for every NEW_CONNECTION_ID frame it receives. The RETIRE_CONN_ID
frame is dispatched via the Control Frame Queue (CFQ). If the remote
peer also withholds ACKs, then it can force the local stack
to allocate ~400MB (depending on ACK delay).

CWE: CWE-770: Allocation of Resources Without Limits or Throttling

Description: RFC 9000 sections 5.1.1 and 5.1.2 [1] describe the mechanism
by which a remote peer can notify the local QUIC stack to change the
destination connection ID (a.k.a. CID) the local stack uses to
identify the connection at the remote peer. Each CID is associated
with a sequence number. The sequence number is transmitted
in NEW_CONNECTION_ID and RETIRE_CONNECTION_ID frames to identify the CID
which is being either associated with a connection or retired.

The remote peer sends a NEW_CONNECTION_ID frame to let the local stack know
a new CID is being associated with an existing connection. The
NEW_CONNECTION_ID frame carries the new CID, its sequence number, and the
retire-prior-to number. The retire-prior-to identifies existing
CIDs that are to be retired. The local QUIC stack must send a
RETIRE_CONNECTION_ID for every destination CID whose sequence number
is less than retire-prior-to. The CID becomes retired after the
local stack receives an ACK for its RETIRE_CONNECTION_ID frame.

Although the OpenSSL QUIC stack supports at most one destination CID
for every connection, it can be tricked into processing more than
one RETIRE_CONNECTION_ID frame per connection. The OpenSSL QUIC
stack currently retires the destination CID as soon as it receives
the NEW_CONNECTION_ID, while in fact the destination CID must
be retired after an ACK for the RETIRE_CONNECTION_ID frame is received.
Correcting the flawed logic also fixes the backlog growth.

[1] https://datatracker.ietf.org/doc/html/rfc9000#name-issuing-connection-ids

FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-105752
vLLM is an inference and serving engine for large language models. Prior to 0.30.0, Harmony tool continuations submitted through "POST /v1/responses" requests rebuild the next-turn engine input without preserving the cache_salt value, placing the continuation prefix in the global unsalted cache namespace even when the caller enabled salting. On deployments with prefix caching enabled, which is the default, an authenticated tenant who can reconstruct a victim's low-entropy post-tool history can submit the same continuation and use the cached_tokens_per_turn count to determine whether the prefix was previously processed, defeating the intended tenant isolation of salted prefix caching. This issue is fixed in version 0.30.0.

🎖@cveNotify

🚨 CVE-2026-105753
vLLM is an inference and serving engine for large language models. Prior to 0.28.0, the default mirrored multimodal LRU cache can commit a media hash in the frontend sender cache during multimodal rendering and before engine admission, while the engine receiver cache never receives the payload if that request is rejected. A later request reusing the same media hash causes MultiModalProcessorSenderCache to send no payload and MultiModalReceiverCache to reach an assertion with the message "Expected a cached item," producing a shared-service availability failure. This issue is fixed in version 0.28.0.

🎖@cveNotify

🚨 CVE-2026-105754
vLLM is an inference and serving engine for large language models. Prior to 0.30.0, the /inference/v1/generate endpoint in the disaggregated scale-out path accepts caller-supplied tensors in the features.kwargs_data field, cache identifiers in the features.mm_hashes field, ranges in the features.mm_placeholders field, and wire-selected multimodal field processors without rebinding them to the active model renderer contract. Forged grid geometry, field types, or non-positive placeholder lengths can terminate the shared EngineCore; when an attacker knows or can induce a victim's content hash, forged cache hashes can poison or retrieve cross-request encoder-cache state; and dropped sparse placeholder masks can alter replayed transport semantics. This issue is fixed in version 0.30.0.

🎖@cveNotify

🚨 CVE-2026-105755
vLLM is an inference and serving engine for large language models. Prior to 0.30.0, flash late-interaction scoring at the /score and /rerank endpoints derives each worker's query_key value from the caller-controlled X-Request-Id header. A concurrent request that reuses a victim's identifier can overwrite the cached query embedding so the victim's documents are scored against the attacker's query, and shared use counters can also cause a late-interaction cache-miss error. This issue is fixed in version 0.30.0.

🎖@cveNotify

🚨 CVE-2026-105756
vLLM is an inference and serving engine for large language models. Prior to 0.30.0, OpenAI-compatible request models accept a non-empty cache_salt value without enforcing the character and length restrictions required by the IPCCacheServerKey consumer in LMCache-MP. On deployments using the LMCache-MP connector, a salt that contains a forbidden character or exceeds the permitted length can raise an uncaught ValueError during scheduler cache lookup, causing EngineCore to terminate and denying service to all concurrent users. This issue is fixed in version 0.30.0.

🎖@cveNotify

🚨 CVE-2026-105757
vLLM is an inference and serving engine for large language models. Prior to 0.30.0, structured-output request failures can escape request-scoped validation and reach the EngineCore fatal-error path. A per-request backend mismatch can re-raise a grammar compilation exception, padding produced by the ngram_gpu speculative-decoding mode can pass a negative token to guidance validation, and the Rust frontend can admit empty structured-output values that the Python frontend rejects, allowing ordinary constrained-generation requests to terminate the shared engine. This issue is fixed in version 0.30.0.

🎖@cveNotify