🚨 CVE-2026-105263
A security flaw has been discovered in Shaarli up to 0.16.3. The affected element is the function MetadataController of the file application/front/controller/admin/MetadataController.php of the component Admin Metadata Endpoint. Performing a manipulation of the argument url results in server-side request forgery. The attack may be initiated remotely. Upgrading to version 0.16.4 is sufficient to fix this issue. The patch is named 8ca4de8e7c932a684481f5fbb1229fe16de1f4d2. It is advisable to upgrade the affected component.

🎖@cveNotify

🚨 CVE-2026-105284
A weakness has been identified in Totolink A3002MU 1.0.0-B20230403.1455. The impacted element is the function sub_40FCFC of the file /bin/boa of the component Authentication Check. Executing a manipulation can lead to improper authorization. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

🎖@cveNotify

🚨 CVE-2026-19184
The NXP GAU ADC driver (drivers/adc/adc_mcux_gau_adc.c) validated the caller-supplied sequence->buffer_size, which is expressed in bytes, against the number of active channels, which is a sample count. It then stored that byte count directly in data->results_length and used it in mcux_gau_adc_read_samples() as the number of uint16_t slots available. Because each conversion result occupies sizeof(uint16_t) bytes, a buffer that was accepted as "large enough" could be written with up to twice its size in bytes, so every sample past the buffer's midpoint was written out of bounds.

adc_read() and adc_read_async() are Zephyr system calls. The syscall verifier in drivers/adc/adc_handlers.c only confirms that the caller owns buffer_size writable bytes (K_SYSCALL_MEMORY_WRITE); deciding whether that size is sufficient for the requested channels and extra_samplings is delegated entirely to the driver. On a build with CONFIG_USERSPACE=y, a user-mode thread that has been granted the ADC device object could therefore submit a deliberately half-sized buffer and cause the driver's work-queue handler — which runs in supervisor mode, outside the caller's MPU restrictions — to write ADC conversion results past the end of that buffer, at an address and for a length of the caller's choosing.

The overrun is bounded by the requested sequence: with sequence->options->extra_samplings set, the sampling loop walks the buffer pointer forward across every sampling, so the total overrun can reach the full size of the supplied buffer (kilobytes for a large extra_samplings). The written words are 16-bit ADC conversion results, so the content is only partially attacker-influenced (via the selected analog input, gain and resolution), but the destination and length are fully controlled — sufficient for kernel memory corruption, a crash, or a userspace-to-kernel privilege escalation. Builds without CONFIG_USERSPACE, or on SoCs other than NXP RW61x with the GAU ADC node enabled, are not exposed to the privilege boundary; there the same defect only causes a silent overflow when the application itself passes an undersized buffer.

The fix replaces the ad-hoc check with the shared adc_sequence_validate_buffer() helper (validating against num_channels * sizeof(uint16_t)), stores buffer_size / sizeof(uint16_t) in results_length, and corrects the loop bound to a post-decrement so exactly the available number of slots may be written.

🎖@cveNotify

🚨 CVE-2026-19185
The system-call verifier for i3c_do_ccc() in drivers/i3c/i3c_handlers.c validated the outer struct i3c_ccc_payload, the broadcast ccc.data buffer and the targets.payloads[] array, but did not validate the per-target data buffers those array elements point at. Each struct i3c_ccc_target_payload carries its own data pointer and data_len, and neither was passed through K_SYSCALL_MEMORY() before the payload was handed to z_impl_i3c_do_ccc() and on to the controller driver. The verifier also operated on the caller's live structure rather than a snapshot, so validated fields could be changed by a second user thread between the check and the driver's use — unlike the sibling z_vrfy_i3c_transfer(), which has always copied its message array first.

The defect is only present in CONFIG_USERSPACE builds, where drivers/i3c/i3c_handlers.c is compiled. An unprivileged user-mode thread that has been granted access to the I3C controller device object — the ordinary way an application lets a user thread talk to I3C peripherals — can issue a direct CCC whose target payload data pointer names an arbitrary kernel address. Controller drivers dereference that pointer directly (for example drivers/i3c/i3c_mcux.c, drivers/i3c/i3c_cdns.c, drivers/i3c/i3c_stm32.c, drivers/i3c/i3c_npcx.c), using rnw to decide direction.

A read CCC therefore causes the kernel-mode driver to write bus-received bytes into an attacker-chosen kernel address for an attacker-chosen length, and a write CCC transmits kernel memory out onto the I3C bus. The result is an out-of-bounds kernel write plus a kernel memory disclosure, i.e. escalation from a user-mode thread to supervisor privilege, defeating the isolation CONFIG_USERSPACE is meant to provide.

The fix introduces copy_ccc_and_do(), which snapshots the payload, copies the target array into kernel memory with k_usermode_alloc_from_copy() (bounding num_targets to fewer than 32), validates each per-target buffer with K_SYSCALL_MEMORY() according to rnw, and copies the driver-written num_xfer and err fields back to the caller.

🎖@cveNotify

🚨 CVE-2026-39721
Missing Authorization vulnerability in Brainstorm Force Starter Templates astra-sites allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Starter Templates: from n/a through 4.7.7.

🎖@cveNotify

🚨 CVE-2026-97071
Incorrect Calculation vulnerability in VillaTheme CURCY woo-multi-currency allows Integer Attacks.This issue affects CURCY: from n/a through 2.2.17.

🎖@cveNotify

🚨 CVE-2026-20541
In Modem, there is a possible out of bounds read due to a missing permission check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01774038; Issue ID: MSV-8911.

🎖@cveNotify

🚨 CVE-2026-20543
In Modem, there is a possible information disclosure due to a logic error. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01645293; Issue ID: MSV-6761.

🎖@cveNotify

🚨 CVE-2026-105285
A security vulnerability has been detected in Totolink A3002MU 1.0.0-B20230403.1455. This affects an unknown function of the file /boafrm/formIpQoS of the component QoS Rule Handler. The manipulation of the argument addQos/comment/entry_name leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

🎖@cveNotify

🚨 CVE-2026-105286
A vulnerability was detected in Totolink A3002MU 1.0.0-B20230403.1455. This impacts the function sub_44B250 of the file /boafrm/formUploadFile of the component File Upload Handler. The manipulation of the argument filename results in path traversal. The attack can be executed remotely. The exploit is now public and may be used.

🎖@cveNotify

🚨 CVE-2026-105287
A flaw has been found in feelec-yishu feelcrm-os 1.0.0. Affected is an unknown function of the file App/Feelcrm/Crm/Controller/AjaxRequestController.class.php of the component getMemberByGroups Endpoint. This manipulation of the argument groups[] causes sql injection. The attack is possible to be carried out remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-105288
A vulnerability has been found in feelec-yishu feelcrm-os 1.0.0. Affected by this vulnerability is the function IndexController::index of the file App/ThinkPHP/Common/functions.php of the component Crm Endpoint. Such manipulation of the argument redirect_url leads to cross site scripting. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-19395
In Qt for MCUs, a Text element that displays styled text halts the device if an <img> tag in the text contains an attribute with an empty value. The text parser passes the empty value to an internal check that only accepts non-empty values. The check fails and reports an error, and the default error handler halts the device.

🎖@cveNotify

🚨 CVE-2025-6170
A flaw was found in the interactive shell of the xmllint command-line tool, used for parsing XML files. When a user inputs an overly long command, the program does not check the input size properly, which can cause it to crash. This issue might allow attackers to run harmful code in rare configurations without modern protections.

🎖@cveNotify

🚨 CVE-2025-53345
Missing Authorization vulnerability in ThimPress Thim Core thim-core.This issue affects Thim Core: from n/a through 2.3.3.

🎖@cveNotify

🚨 CVE-2026-56208
A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution.

🎖@cveNotify

🚨 CVE-2026-56209
An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution.

🎖@cveNotify

🚨 CVE-2026-56210
A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory).

🎖@cveNotify

🚨 CVE-2026-56211
A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames.

🎖@cveNotify

🚨 CVE-2026-58010
A flaw was found in GLib. An off-by-one error can occur in the gvs_tuple_is_normal function in the glib/gvariant-serialiser.c file when doing an alignment padding check because the bounds check uses > instead of >=, causing an out-of-bounds read of only 1 byte. This issue can cause a minor information disclosure of 1 byte and a denial of service when the out-of-bounds read crosses a page boundary.

🎖@cveNotify

🚨 CVE-2026-58011
A flaw was found in GLib. An out-of-bounds read of only 2 bytes can occur in the g_date_time_get_ymd function in the glib/gdatetime.c file when an invalid GDateTime object produced by the g_date_time_add_full function is processed. This flaw can corrupt the date output and potentially cause logic errors that may lead to a denial of service.

🎖@cveNotify