🚨 CVE-2026-19743
Improper path validation in the local IPC service of TeamViewer Full Client and Host on Windows, Linux, and macOS prior to version 15.82 allows a local authenticated user with low privileges to perform arbitrary file writes with elevated privileges (NT AUTHORITY/SYSTEM \ root). By sending crafted IPC commands to the local service daemon, an attacker could manipulate file paths, leading to local privilege escalation.

🎖@cveNotify

🚨 CVE-2026-35189
Issue summary: A certificate with many nameRelativeToCRLIssuer CRL
distribution points causes disproportionate heap growth when OpenSSL caches
X.509 extensions.

Impact summary: Receiving a crafted certificate from a malicious peer can lead
to significant memory pressure and possible Denial of Service in clients or
in servers that solicit client certificates.

CWE: CWE-770: Allocation of Resources Without Limits or Throttling

Description: A certificate or a set of certificates that fits under the limit for
size of certificates accepted from the peer (~100 KiB) can result in allocation
of several hundred MiB of resident memory on the receiving side
during a normal TLS handshake. This may be enough to crash the client or
server, if multiple concurrent connections lead to similarly large memory
allocations.

The fix postpones processing of the CRL distribution points extensions in
certificates to the time when the processed value is required for CRL processing.
This avoids keeping large memory allocations for a long time when such
certificates are received.

FIPS impact: no
The affected code is outside the FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-35191
Issue summary: The OpenSSL QUIC server, when configured to not preform address
validation, can be forced to count incoming packets multiple times in its
unvalidated credit computation, leading to a violation of the RFC 9000
unvalidated connection amplification limit of 3 times the amount of data
received.

Impact summary: A remote attacker able to spoof packets to a server using the
OpenSSL QUIC implementation might use the server for an amplification of
a DDoS attack.

CWE: CWE-440: Expected Behavior Violation

Description: OpenSSL's QUIC stack, when operating as a server, enforces client
address validation (RFC 9000, Section 8), to confirm the peer address is not
used for a traffic amplification attack. If this feature is disabled on the
server, the QUIC stack limits the amount of server data that can be sent to 3
times the amount of data received from the peer address, until such time as the
TLS handshake is completed.

The OpenSSL QUIC server, when operating in non-validation mode, adds the
length of the whole datagram received to the unvalidated credit limit when
processing each QUIC packet in the datagram. A remote peer may,
after establishing a connection with an initial client hello frame, send a
subsequent datagram containing multiple QUIC packets, leading the server to
account the entire datagram length for each packet in the datagram, resulting
in the server believing that the peer has sent more data than it actually has,
thereby violating the 3x amplification limit mandated by the RFC.

FIPS impact: no
As the QUIC stack lives outside the FIPS module boundary, no FIPS modules
are affected by this CVE.

🎖@cveNotify

🚨 CVE-2026-42772
Issue summary: The QUIC stream reassembly algorithm performance deteriorates
progressively as packets are arriving out of order. The worst case has
a quadratic complexity proportional to the number of stream frames kept in
the buffer for the received stream data.

Impact summary: A remote QUIC peer that completes the handshake can create
a connection-scoped CPU pressure and potentially a Denial of Service using
compliant STREAM frames inside the advertised receive window, with low
attacker bandwidth.

CWE: CWE-407: Inefficient Algorithmic Complexity

Description: OpenSSL manages received QUIC stream fragments using a
doubly-linked list. While it optimizes for append operations (at the end of
the list), it falls back to a head-to-tail linear search for any fragment
that does not immediately follow the current `tail`.

By manipulating the sequence of offsets, an attacker can force the server
to perform O(n^2) operations, consuming excessive CPU time for the
QUIC process.

FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-54872
Issue summary: The generic elliptic-curve scalar multiplication used for
ECDSA and SM2 signature operations with curves that do not have a dedicated
implementation leaks information about the secret nonce through timing.

Impact summary: An attacker able to measure signing times may learn
information about the per-signature secret nonce, which over many signatures
can, via a lattice / Hidden Number Problem attack, lead to recovery of the
private key.

CWE: CWE-208: Observable Timing Discrepancy

Description: The generic elliptic-curve scalar multiplication used for
curves that do not have a dedicated constant-time implementation pads the
secret scalar with non-constant-time BIGNUM operations, so the time taken
depends on the value of the secret scalar derived from the ECDSA and SM2 nonce.

The leak is very small; observing it requires a large number of
measurements. The effect is largest for curves whose group order lies
on a machine-word boundary, such as brainpoolP384r1.

Applications using ECDSA signing over the Brainpool and other generic prime
curves, and SM2 signing on platforms that use the generic implementation,
are vulnerable to this issue.

The NIST curves P-256, P-384 and P-521 use dedicated constant-time
implementations and are not affected.

FIPS Impact: no
The FIPS modules are not affected: the approved NIST curves used in the FIPS
provider have dedicated constant-time implementations and do not use the
affected code path.

🎖@cveNotify

🚨 CVE-2026-54873
Issue summary: QUIC process may keep memory for QUIC packet
buffer for much longer period than necessary.

Impact summary: Remote peer can exploit this vulnerability
by sending maliciously crafted packets, making the local
QUIC stack to keep the memory for packet buffers allocated.
The time for which the memory remains allocated is entirely
under the control of the potentially malicious remote peer.

CWE: CWE-770: Allocation of Resources Without Limits or Throttling

Description: To save copy operation from the packet buffer to the
stream reassemble buffer the QUIC stack leaves the stream data
on the packet buffer waiting to be copied to a buffer provided
by the local receiving application. The QUIC stack releases
a reference to the packet buffer only after the data are copied
to the application buffer. This design is more efficient for
legitimate data transfers but enables an attacker to allocate a lot
more memory than actually required by the data kept in the receiving
stream buffer.

To mitigate the vulnerability, the QUIC stack now calculates
and monitors memory overhead for every stream. The memory overhead
for a single stream frame is calculated as a difference between the
size of the whole packet that carries the stream frame and the size
of the stream frame itself. The memory overhead for a single stream
frame is added to the total (cumulative) memory overhead QUIC stack
keeps for each stream. Once the cumulative memory overhead exceeds
64kB, the QUIC stack moves the stream frame data from the packet
buffer to the stream buffer, starting with the next packet received.

FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-54875
Issue summary: A non-constant-time optimized implementation of scalar
point multiplication is used for SM2 private key operations on ARM64 and
RISC-V platforms.

Impact summary: An attacker able to measure the time taken by, or to observe
the cache-line access pattern of SM2 signing or decryption on an affected
platform can learn information about the secret scalar.

CWE: CWE-208: Observable Timing Discrepancy

Description: On ARM64 and RISC-V processors, the SM2 curve uses an optimized
scalar multiplication implementation whose conditional branches and table
look ups are chosen according to the bits of the secret scalar. The execution
time and the cache-access pattern therefore depend on the long-term private
key (during SM2 decryption) or the per-signature nonce (during SM2 signature
generation), forming a timing and cache side-channel.

FIPS Impact: no
SM2 is not a FIPS algorithm and the optimized SM2 implementation is not part
of the FIPS module.

OpenSSL 4.0, 3.6, 3.5 and 3.4 are vulnerable to this issue on AArch64 and
RISC-V.

OpenSSL 3.0, 1.1.1 and 1.0.2 are not affected by this issue.

OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.5.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.9.
OpenSSL 3.4 users should upgrade to OpenSSL 3.4.8.

This issue was reported on 2 May 2026 by Abhinav Agarwal.
It was independently reported on 6 June 2026 by Feng Xue.
The fix was developed by Igor Ustinov.

-- cut (non-publishing metadata for internal use) --
Reported by: Abhinav Agarwal, Feng Xue
Fixed by: Igor Ustinov

🎖@cveNotify

🚨 CVE-2026-72897
Issue summary: A TLS server that calls SSL_set_SSL_CTX() to switch a
connection to a different SSL_CTX part way through a handshake may access
memory beyond the end of an internal array if the replacement context knows
about more provider signature algorithms than the context the connection was
created from. Applications which never call SSL_set_SSL_CTX() are not
affected.

Impact summary: A remote peer may be able to cause a small out-of-bounds
read, and in some circumstances a fixed-value out-of-bounds write, on the
server heap. This may lead to a Denial of Service.

CWE: CWE-787: Out-of-bounds Write

Description: A TLS connection records how many certificate slots it has
when it is created, taken from the SSL_CTX that created it: the built-in
certificate types plus one slot for each provider TLS-SIGALG entry that
context was aware of. That count sizes an internal array of per-slot
certificate validity flags.

An application may replace a connection's SSL_CTX part way through the
handshake by calling SSL_set_SSL_CTX(), most commonly from a servername
callback in order to serve a different virtual host. Doing so did not
refresh the recorded count. A provider signature algorithm's slot index is
its position in the list of whichever context resolves it, so if the
replacement context is aware of more of them than the original, an
algorithm offered by the peer can resolve to an index beyond the end of the
array. Processing the peer's signature algorithms then reads one four byte
word past the end for each such algorithm and, where the word read is zero,
writes a fixed value over it. A peer offering many of them can corrupt heap
metadata and abort the process.

Only provider signature algorithms which occupy one of the excess slots,
and which the server also has configured, have this effect. Codepoints the
replacement context does not recognise are discarded without being resolved
to a slot, and provider signature algorithms are usable only from TLS 1.3.

The two contexts must therefore be aware of different numbers of provider
signature algorithms, which requires separate library contexts, a provider
loaded between the two being created, or providers which differ in what
they advertise - in 4.0, for example, the default provider advertises SM2
where the FIPS provider does not. A deployment meeting the condition is
also unable to negotiate the affected algorithms with legitimate clients,
since the same stale count hides the corresponding certificates, so the
misconfiguration is likely to be noticed. For that reason, and because the
configuration is not the default, this issue has been assessed as Low
severity.

FIPS impact: no
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-75805
Issue summary: A CMP client that requests certificate revocation on the basis
of a PKCS#10 CSR may dereference a NULL pointer and terminate abnormally when
processing a crafted revocation response.

Impact summary: The NULL pointer dereference happens on a read which
leads to a crash and a Denial of Service for the affected client application.

CWE: CWE-476: NULL-pointer dereference

Description: A CMP client revoking a certificate has to tell the server which
certificate to revoke, and may do so by supplying a PKCS#10 CSR instead of the
certificate itself or its issuer name and serial number. This is
'openssl cmp -cmd rr -csr <file>' on the command line, or
OSSL_CMP_exec_RR_ses() with the certificate supplied via
OSSL_CMP_CTX_set1_p10CSR() through the API.

A CSR does not contain the issuer name and serial number of the certificate,
so the client does not send them. A server may optionally name the
certificate it revoked in its response, and the client then compares that
name against what it sent. Having sent neither an issuer name nor a serial
number, it has nothing to compare against, and a server returning a specially
crafted name causes the client to read from a NULL pointer and crash.

The revocation response is checked for valid message protection before
the affected code is reached, so an attacker must be a malicious or
compromised CMP server, or a man-in-the-middle in possession of the
secret used for message protection. Clients that identify the certificate
to be revoked by a certificate or by issuer and serial number rather
than by a PKCS#10 CSR are not affected.

FIPS impact: no
No FIPS modules are affected by this issue, as the CMP protocol
implementation is outside the OpenSSL FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-75806
Issue summary: An established DTLS 1.2 association using an AEAD cipher suite
can be terminated by a single unauthenticated datagram whose encrypted
fragment is shorter than the mandatory explicit IV and authentication tag
overhead.

Impact summary: An attacker who can send a datagram that is routed to an
existing DTLS 1.2 association can tear that association down without knowing
any key material. This is a Denial of Service limited to the targeted
association. There is no memory safety or confidentiality impact.

CWE: CWE-1284: Improper Validation of Specified Quantity in Input

Description: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher
suite carries an explicit IV followed by the ciphertext and an authentication
tag. When decrypting such a record the record layer passed the record length to
the cipher implementation before checking that the record was long enough to
contain the explicit IV and the tag. For a record shorter than that overhead the
cipher implementation rejected the impossible length, and the record layer
treated this as an internal failure and raised a fatal internal_error alert
instead of treating the record as one that failed authentication.

In TLS 1.2 the same record causes a fatal internal_error alert instead of the
expected bad_record_mac alert. Since any undecryptable record already
terminates a TLS connection, this is a protocol conformance issue rather than
a security issue in TLS.

The fix validates the record length against the explicit IV and tag length
before any AEAD processing, so that TLS reports bad_record_mac and DTLS
silently discards the record.

FIPS impact: no
The affected code is outside the FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-77696
Issue summary: SM2 signature generation uses non-constant-time arithmetic
on secret values, forming a timing side-channel.

Impact summary: An attacker able to measure SM2 signing times may learn
information about the per-signature secret nonce, which over many signatures
can, via a lattice / Hidden Number Problem attack, lead to recovery of the
private key.

CWE: CWE-208: Observable Timing Discrepancy

Description: SM2 signature generation computes the signature value using
variable-time BIGNUM operations on the secret nonce and the private key, so
the time taken to produce an SM2 signature depends on these secret values,
forming a timing side-channel.

Applications performing SM2 signature generation are affected on all
platforms.

FIPS Impact: no
SM2 is not a FIPS algorithm.

🎖@cveNotify

🚨 CVE-2026-84782
Issue summary: The DTLS retransmission logic does not correctly handle
a handshake message write that is suspended part-way through.
The retransmitted message can be read past the message buffer and
the retransmission overwrites the internal state the suspended write
needs to resume correctly.

Impact summary: The retransmitted message can disclose a heap memory
to the peer as plaintext handshake data or cause a crash and a Denial
of Service when the read reaches an unmapped memory region.

CWE: CWE-125: Out-of-bounds Read

Description: DTLS handshake messages can be written out in multiple
fragments, and a write can suspend mid-message (returning WANT_WRITE)
if the underlying transport temporarily cannot accept more data. While
such a write is suspended, the DTLS retransmission timer may
independently fire and ask the retransmission logic to resend an
earlier, already-acknowledged-as-sent message from its retransmit
queue.

The retransmission logic reused the same internal buffer and position
tracking as the message that was still being written, without
resetting the position back to the start of the message being
retransmitted. As a result the retransmission was read starting from
wherever the suspended write had left off, producing a mislabelled
message whose body was leftover bytes from the other, larger message
still in flight - content that was never meant to be sent at that
point, and which could run past the end of the allocated buffer.

Separately, even when the retransmission is positioned correctly,
allowing it to run to completion while another write is suspended
overwrites the same shared bookkeeping that the suspended write
depends on to resume. When the application later resumes the
suspended write (via a subsequent SSL_read(), SSL_write(),
SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a
state inconsistent with the message and aborts the process in
a debugging build.

The fix resets the retransmission's read position to the start of the
message before resending, and skips retransmission entirely whenever a
handshake write is still suspended, deferring to the next call that
resumes it instead.

FIPS impact: no
The affected code is outside the FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-84783
Issue summary: The first concurrent use of the same X.509 certificate by
several threads may cause its cached extension data to be freed while
another thread is still using it.

Impact summary: A remote, unauthenticated peer could crash a multi-threaded
TLS client, or a multi-threaded TLS server that requests client
certificates, if the first certificate chains built to the same trusted CA
certificate are built by several connections at the same time. This is a
use-after-free read, which is likely to crash the process, resulting in a
Denial of Service.

CWE: CWE-416: Use After Free

Description: OpenSSL caches the decoded values of a certificate's X.509v3
extensions inside the X509 object the first time they are needed. In
OpenSSL 4.0 this cache is built in two phases: the extension values are
computed while holding a read lock on the certificate, and the results are
then installed into the certificate under a write lock. Because a read lock
does not exclude other readers, several threads can compute the cache for
the same certificate at the same time. Each thread that subsequently
acquires the write lock installs its own results and frees the values
installed by the thread before it, even though that earlier thread has
already marked the cache as complete and may have returned pointers into it
to its caller. A caller still using those pointers then reads freed memory.

Any certificate shared between threads is exposed the first time its
extensions are decoded. In TLS the certificates at risk are the trusted CA
certificates supplied for chain verification, by whatever means, since these
are shared by every connection and their extensions are decoded and cached
the first time a chain is built to them. Certificates sent by the peer are
decoded separately for each connection and are not shared, so they are not
affected. In a TLS client verifying server certificates, or a TLS server
that requests and verifies client certificates, the use-after-free could
only occur if the first chains built to the same trusted CA are built by
several connections at the same time.

FIPS impact: no
The FIPS module is not affected as X.509 certificate handling is outside
of the OpenSSL FIPS module boundary.

OpenSSL 4.0 is vulnerable to this issue.

OpenSSL 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are not affected by this issue.

OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.

This issue was reported on 27 August 2026 by Tim Becker (Xint.io) and
independently in a public report on 31 August 2026 by aydinmercan.

The fix has been developed by Bob Beck.

-- cut (non-publishing metadata for internal use) --
Reported by: Tim Becker (Xint.io), aydinmercan
Fixed by: Bob Beck

🎖@cveNotify

🚨 CVE-2026-84784
Issue summary: A malicious remote peer may flood the local QUIC
stack with NEW_CONNECTION_ID frames by avoiding a limit check on
how many connection IDs the remote QUIC stack can use.

Impact summary: The local QUIC stack sends a RETIRE_CONN_ID frame
for every NEW_CONNECTION_ID frame it receives. The RETIRE_CONN_ID
frame is dispatched via the Control Frame Queue (CFQ). If the remote
peer also withholds ACKs, then it can force the local stack
to allocate ~400MB (depending on ACK delay).

CWE: CWE-770: Allocation of Resources Without Limits or Throttling

Description: RFC 9000 sections 5.1.1 and 5.1.2 [1] describe the mechanism
by which a remote peer can notify the local QUIC stack to change the
destination connection ID (a.k.a. CID) the local stack uses to
identify the connection at the remote peer. Each CID is associated
with a sequence number. The sequence number is transmitted
in NEW_CONNECTION_ID and RETIRE_CONNECTION_ID frames to identify the CID
which is being either associated with a connection or retired.

The remote peer sends a NEW_CONNECTION_ID frame to let the local stack know
a new CID is being associated with an existing connection. The
NEW_CONNECTION_ID frame carries the new CID, its sequence number, and the
retire-prior-to number. The retire-prior-to identifies existing
CIDs that are to be retired. The local QUIC stack must send a
RETIRE_CONNECTION_ID for every destination CID whose sequence number
is less than retire-prior-to. The CID becomes retired after the
local stack receives an ACK for its RETIRE_CONNECTION_ID frame.

Although the OpenSSL QUIC stack supports at most one destination CID
for every connection, it can be tricked into processing more than
one RETIRE_CONNECTION_ID frame per connection. The OpenSSL QUIC
stack currently retires the destination CID as soon as it receives
the NEW_CONNECTION_ID, while in fact the destination CID must
be retired after an ACK for the RETIRE_CONNECTION_ID frame is received.
Correcting the flawed logic also fixes the backlog growth.

[1] https://datatracker.ietf.org/doc/html/rfc9000#name-issuing-connection-ids

FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-92368
TeamViewer Full Client and Host for Linux and macOS prior version 15.82 contain a heap-based buffer overflow vulnerability in the processing of .tvs session recording files. A size mismatch during decompression of recorded session data can result in out-of-bounds heap writes. By convincing a user to open a specially crafted session recording through the "Play or convert recorded session…" feature, an attacker may achieve arbitrary code execution with the privileges of the current user

🎖@cveNotify

🚨 CVE-2026-92369
TeamViewer Full Client and Host prior to version 15.82 on Windows contain a TOCTOU race condition in the installer rollback mechanism. A local low-privileged attacker can replace rollback backup files stored in a user-writable temporary directory before they are restored by an elevated installer, resulting in privilege escalation to NT AUHORITY/SYSTEM. Exploitation requires successful timing of the race condition and a rollback during installation or update.

🎖@cveNotify

🚨 CVE-2026-92370
An improper access control vulnerability in TeamViewer Full Client, Host, and related affected modules on Windows, Linux, and macOS allows an authenticated remote attacker to bypass user-configured permission settings during session establishment. By modifying access control parameters for restricted features, an attacker can perform actions that were explicitly denied by the victim's configuration. This may result in unauthorized actions and potentially lead to remote code execution on the target system.

🎖@cveNotify

🚨 CVE-2026-92371
TeamViewer Full Client and Host for Linux prior version 15.82 contains an improper path validation vulnerability in the Cloud Session Recording (CSR) functionality. By exploiting a race condition during path validation and subsequent file access, a local authenticated attacker may cause privileged file operations in unintended locations on the affected system.

🎖@cveNotify

🚨 CVE-2022-51019
Akaunting before 2.1.31 contains an OS command injection vulnerability in the module installation and update flow where the alias parameter is passed unvalidated to shell command execution. Authenticated users with admin panel access can inject shell metacharacters into the alias parameter to execute arbitrary commands on the server.

🎖@cveNotify

🚨 CVE-2026-100238
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Wikimedia Foundation Mediawiki - Flow Extension allows Stored XSS.

This issue affects Mediawiki - Flow Extension: from * before 1.46.1, 1.45.5, 1.43.10.

🎖@cveNotify

🚨 CVE-2026-100240
Missing Authorization vulnerability in Wikimedia Foundation Mediawiki - TemplateSandbox Extension allows Accessing Functionality Not Properly Constrained by ACLs.

This issue affects Mediawiki - TemplateSandbox Extension: from * before 1.46.1, 1.45.5, 1.43.10.

🎖@cveNotify