🚨 CVE-2026-100546
OpenClaw (npm package `openclaw`) versions >= 2026.7.2 and < 2026.9.2 contain a race condition in the Discord realtime voice transcript path. Concurrent control-classified voice transcripts could consume speaker context belonging to another participant after an asynchronous control check, causing a transcript to inherit another speaker's owner status. In Discord agent-proxy voice sessions using the affected realtime control path, an utterance from a non-owner participant could reach the downstream agent boundary marked as owner, so owner-sensitive behavior is applied to the wrong speaker. Exploitation depends on concurrent transcript timing and on the tools and commands available to the affected agent. The issue is fixed in 2026.9.2; as a workaround, disable Discord realtime voice for agents that distinguish owner and non-owner senders.

🎖@cveNotify

🚨 CVE-2026-100547
OpenClaw is a coding agent distributed as the npm package `openclaw`. In affected versions (2026.7.1 through 2026.7.2), alternate but valid `file:` URL spellings supplied over the Agent Client Protocol (ACP) were treated as relative paths and were incorrectly classified as reads scoped to the session working directory. When an operator connected `openclaw acp client` to an untrusted or compromised ACP peer, that peer could request a read of a file outside the session working directory without the approval prompt normally required for that path, resulting in disclosure of local file contents. The demonstrated impact is limited to file confidentiality; mutating and command-capable tool classes are not affected. This issue is fixed in OpenClaw 2026.8.1.

🎖@cveNotify

🚨 CVE-2026-100548
OpenClaw (npm package 'openclaw') versions >= 2026.3.28 and < 2026.8.1 contain a credential exposure issue in memory embedding failover. When remote embedding fallback is configured and the primary embedding provider fails, the request can be sent to a different fallback provider while still reusing the primary provider's configured API key, causing that credential to be transmitted as a bearer token to an unintended vendor. The practical impact depends on the configured providers, whether failover occurs, and the privileges attached to the primary provider key. The issue is fixed in 2026.8.1; as a workaround, disable cross-provider embedding fallback or configure each provider with separate, narrowly scoped credentials.

🎖@cveNotify

🚨 CVE-2026-100549
OpenClaw versions before 2026.8.1 contain a path traversal vulnerability in QQBot voice attachment handling where filenames are decoded twice, allowing encoded traversal segments to reappear after sanitization. Attackers can supply crafted voice attachments that write files outside the intended staging directory to other process-writable locations.

🎖@cveNotify

🚨 CVE-2026-100655
Netty (io.netty:netty-codec-http) versions up to and including 4.1.137.Final and from 4.2.0.Final through 4.2.17.Final accept an unlimited number of concurrent remote-initiated SPDY streams: SpdySessionHandler defaults localConcurrentStreams to Integer.MAX_VALUE and exposes no API to change it. A remote peer that opens a SPDY connection and sends millions of SYN_STREAM frames with FLAG_FIN=0 causes the server to allocate unbounded heap and direct memory, eventually triggering a JVM OutOfMemoryError and crashing the service. Fixed in 4.1.138.Final and 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100656
Netty (io.netty:netty-codec-http) contains an unbounded per-connection queue growth flaw in HttpServerCodec. The codec tracks the HTTP method of each still-unanswered pipelined request; the first 32 entries are bit-packed into a single long, but every additional entry is appended to methodOverflowQueue, an ArrayDeque with no size limit and no rejection path. A remote, unauthenticated attacker who pipelines HTTP/1.1 requests on a single connection while withholding reads on their own end (preventing responses from being flushed) can grow this queue without bound, causing unbounded heap growth and denial of service. Affected versions are 4.2.0.Final through 4.2.17.Final and all releases up to and including 4.1.137.Final; the issue is fixed in 4.2.18.Final and 4.1.138.Final.

🎖@cveNotify

🚨 CVE-2026-100657
Netty's STOMP codec (io.netty:netty-codec-stomp) contains a ByteBuf leak in StompSubframeDecoder. Once a frame's declared content-length has been fully read, the decoder allocates a chunk buffer from the channel allocator and parks it in an instance field while waiting for the single NUL byte that terminates the frame. If that byte never arrives, the buffer is never released: the replay Signal thrown by skipNullCharacter extends Error rather than Exception, so the decoder's catch(Exception) release path does not run, and StompSubframeDecoder overrides neither handlerRemoved0 nor channelInactive, so the buffer also survives channel teardown. A remote peer can leak one allocator buffer per connection by sending a complete, well-formed frame body and withholding its terminating NUL byte; with the default pooled allocator the memory is never returned to the pool or reclaimed by garbage collection, so the leak accumulates for the lifetime of the process and can lead to memory exhaustion. This affects versions up to and including 4.1.137.Final and versions 4.2.0.Final through 4.2.17.Final; it is fixed in 4.1.138.Final and 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100658
Netty (io.netty:netty-codec-http) contains an unbounded per-connection queue in WebSocketServerExtensionHandler. The handler offers an entry to its per-channel validExtensions queue for every inbound HttpRequest, but polls an entry only when the application writes an HttpResponse, and the queue size is never bounded. A remote, unauthenticated peer can use HTTP/1.1 pipelining to send requests faster than the application produces responses — including plain non-upgrade HTTP requests to any path — causing the queue to grow without limit until the JVM exhausts heap memory and terminates with OutOfMemoryError. Because the affected handler is the base class of WebSocketServerCompressionHandler, any server that enables permessage-deflate is exposed on its plain HTTP port before any WebSocket upgrade completes and before any application-level authentication. Affected versions are 4.1.88.Final through 4.1.137.Final and 4.2.0.Final through 4.2.17.Final; the issue is fixed in 4.1.138.Final and 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100659
Netty's HTTP/3 codec (io.netty:netty-codec-http3) in versions 4.2.0.Final through 4.2.17.Final does not enforce the RFC 9114 requirement that the :authority pseudo-header field and a literal host header field, when both present, carry the same value. A remote unauthenticated peer can send a single HEADERS frame containing both fields with differing, attacker-controlled values; the request is accepted and delivered to the application with two conflicting authorities, allowing routing, virtual-host, and access-control decisions to be bypassed when different components in the request path consult different fields. This issue is fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100660
Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.0.Final through 4.2.17.Final retains unbounded per-stream QPACK encoder state. QpackEncoder stores a queue and a dynamic-table index tracker for every encoded field section that references the QPACK dynamic table, keyed by the peer-controlled QUIC stream ID, and these entries are released only when the remote decoder sends a Section Acknowledgment or Stream Cancellation instruction — not when the HTTP/3 stream completes. There is no limit on the number of tracked streams, field sections, or retained bytes. A remote, unauthenticated HTTP/3 client can advertise a non-zero QPACK dynamic-table capacity, acknowledge the table insertion so the server reuses a dynamically indexed response header, and then omit all mandatory Section Acknowledgments while issuing sequential requests over a single QUIC connection, bypassing concurrent-stream limits and causing unbounded heap growth until the server exhausts memory (denial of service). Fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100661
Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain a denial-of-service vulnerability in the QPACK prefixed-integer decoder (QpackUtil.decodePrefixedInteger), which does not bound the number of continuation bytes it will process. A remote, unauthenticated peer can open a QPACK unidirectional stream (type 0x02 encoder or 0x03 decoder) and send a first byte with all prefix bits set (e.g. 0xFF for a 7-bit prefix or 0x3F for a 5-bit prefix) followed by an endless run of 0x80 continuation bytes. The decoder returns -1 ('need more bytes'), so callers never consume the input, the ByteToMessageDecoder cumulator grows without bound, and each decode() invocation re-scans the whole accumulated buffer, yielding O(N^2) CPU cost. The result is unbounded per-connection heap growth (OutOfMemoryError) and event-loop CPU starvation, reachable in every configuration. Fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100662
Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain an uncontrolled resource consumption vulnerability in the QPACK encoder-stream instruction decoder (QpackEncoderHandler, installed on the peer-initiated unidirectional QPACK encoder stream, type 0x02). The handler accepts an attacker-declared string-literal length of up to Integer.MAX_VALUE (~2 GiB) for the Name Length and Value Length fields of the "Insert With Literal Name" instruction (RFC 9204 §4.3.3), with no per-instruction or per-literal length cap and no cumulation-size limit; the existing HTTP/3 limits (maxHeaderListSize, maxUnknownFramePayloadLength, DEFAULT_MAX_FIELD_SECTION_SIZE) are not applied to this handler. A remote, unauthenticated peer with an established HTTP/3 connection to a default Netty HTTP/3 server can declare a very large literal length and then trickle fewer bytes than declared, causing the ByteToMessageDecoder MERGE cumulator to retain and grow the per-connection buffer, and ultimately triggering a large byte-array allocation. This leads to unbounded per-connection heap growth and OutOfMemoryError, resulting in denial of service. Fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100663
Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.2.Final through 4.2.17.Final does not special-case HTTP/1 CONNECT authority-form request-targets when converting HTTP/1 messages to HTTP/3 in HttpConversionUtil.toHttp3Headers. The authority-form target (e.g., "CONNECT trusted.example:443") is parsed as a URI, so its host is emitted as :scheme, :path is set to "/", and the HTTP/1 Host header is used as :authority; if no Host header is present the CONNECT target is dropped. In a Netty-based HTTP/1-to-HTTP/3 proxy or gateway, a remote client can send a CONNECT request whose Host header names a different authority than the request-target, producing a malformed HTTP/3 CONNECT whose tunnel :authority is attacker-controlled. This can bypass tunnel allow-lists, egress policy, backend selection, or audit controls that validate the HTTP/1 CONNECT request-target before forwarding over HTTP/3. The issue is fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100664
Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.2.Final through 4.2.17.Final builds the HTTP/3 :authority pseudo-header from the HTTP/1 Host header before considering the authority of an absolute-form HTTP/1 request-target. In HttpConversionUtil.toHttp3Headers(HttpMessage, boolean) — reached via Http3FrameToHttpObjectCodec(false) — a non-empty Host header takes precedence over the request-target authority, contrary to the HTTP/1.1 rule that a server receiving an absolute-form request-target must ignore the Host header. In a Netty-based HTTP/1-to-HTTP/3 gateway, proxy, or protocol bridge, a remote client can send a request such as "GET https://trusted.example/admin HTTP/1.1" with "Host: attacker.example", causing components that validate, authorize, or route on the RFC-defined request-target authority to reach a different decision than the upstream HTTP/3 peer, which receives :authority derived from the conflicting Host header. This authority confusion can affect virtual-host routing, allow-list checks, backend selection, cache keys, and URL generation. The advisory reports integrity impact only (no code execution, memory corruption, or availability impact). Fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100665
Netty versions from 4.2.11.Final before 4.2.18.Final contain an incomplete hostname verification fix in the QUIC certificate verification path when using a plain X509TrustManager. The BoringSSLCertificateVerifyCallback discards the SSLEngine for plain trust managers, preventing endpoint identification from running even when HTTPS verification is configured. Attackers on the network path can present a certificate chain for the wrong hostname that the plain trust manager accepts, bypassing hostname authentication for QUIC clients.

🎖@cveNotify

🚨 CVE-2026-100666
Netty's HttpServerCodec (io.netty:netty-codec-http) in versions 4.2.0.Final through 4.2.16.Final and in versions up to and including 4.1.136.Final pairs each outbound response with an inbound request by calling pollMethod() once per response, including for 1xx informational responses. If a client pipelines an HTTP/1.1 GET carrying an Expect: 100-continue header followed by a HEAD request, the 100 Continue response consumes the queued GET method, so the subsequent 200 OK for the GET is paired with HEAD and its body is dropped, while the following 200 OK for the HEAD request is written with a body. This desynchronizes HTTP parsing on the connection: the GET entity is never delivered and the HEAD response body is interpreted as the GET body, resulting in response splitting and unsafe connection reuse. Fixed in 4.2.17.Final and 4.1.137.Final.

🎖@cveNotify

🚨 CVE-2025-71422
Contrast is a Kubernetes runtime for confidential containers. In versions before 1.12.1, the secure persistent volume feature is vulnerable to a malicious host supplying a crafted LUKS2 volume to a pod VM. LUKS2 volume metadata is not authenticated and, with cryptsetup versions prior to 2.8.1, a header specifying the null keyslot encryption algorithm (cipher_null-ecb) is accepted without error. Because the Contrast Initializer assumes a device is protected if `cryptsetup open` succeeds with the secret seed, the guest will open the attacker-supplied volume and write secret data in plaintext, or under a volume key known to the attacker, allowing the host to read confidential data that should have been encrypted. Contrast v1.12.1 ships cryptsetup 2.8.1, which disables null ciphers in keyslots when the passphrase is non-empty; v1.13.0 adds detached-header validation in guest memory and integrity protection for secure persistent storage. Contrast persistent volumes were not integrity protected, so integrity impact is not considered.

🎖@cveNotify

🚨 CVE-2025-71423
Edgelesssys Contrast is a confidential-computing runtime for Kubernetes. In versions 1.9.0 before 1.12.2, the initializer logs the full NewMeshCert response — which contains the workload secret — to standard output at INFO level. As a result, workload secrets are exposed to any Kubernetes user with get or list permission on pods/logs. Because workload secrets are used for encrypted storage and Vault integration, those must also be considered compromised. This is a regression of GHSA-h5f8-crrq-4pw8.

🎖@cveNotify

🚨 CVE-2025-71425
Contrast (Edgeless Systems) before 1.8.1 logs the workload secret to stderr, and thus to Kubernetes logs, when the Contrast initializer is configured with CONTRAST_LOG_LEVEL set to info or debug. Because info is the default, all installations that do not customize the initializer log level are affected. This exposes workload secrets — normally accessible only to the Contrast Coordinator, the initializer, the seedshare owner, and the workload owner — to Kubernetes users with get or list permission on pods/logs and to anyone with read access to the Kubernetes log storage, such as the cloud provider. Deployments that do not use workload secrets are unaffected.

🎖@cveNotify

🚨 CVE-2025-71426
Contrast is a confidential-computing runtime for Kubernetes. In versions before 1.4.1, a recovering Coordinator does not verify the seed supplied by the recovering party. An attacker can therefore stand up a rogue Coordinator whose manifest passes validation but whose secret seed is attacker-controlled. If network traffic is redirected from the legitimate Coordinator to the attacker's Coordinator, a workload owner can be impersonated when they either set a new manifest without comparing the returned root CA certificate against the existing one (the default behavior of the contrast CLI) or verify the Coordinator without comparing the root CA certificate against a trusted reference. Under these conditions the attacker can issue certificates that chain back to the rogue Coordinator's root CA and recover arbitrary workload secrets of workloads deployed after the attack. Secrets of the legitimate Coordinator (seed, workload secrets, CA), workload integrity, and certificates chaining to the mesh CA are not affected.

🎖@cveNotify

🚨 CVE-2026-100835
Contrast before 1.16.0 is susceptible to remote attestation relay attacks. Contrast accepted any TEE attestation report that verified correctly and contained the expected firmware patch levels and software measurements, regardless of which machine produced it, so attestation was not bound to specific, physically trusted hardware. An attacker who can both intercept network traffic between the CLI and the Coordinator (or between the Coordinator and an attested component) and forge reports or extract secrets from any single TEE machine under their physical control can relay such a report to impersonate a Contrast Coordinator or a Contrast workload, defeating identity verification in Contrast's attested TLS (aTLS).

🎖@cveNotify