🚨 CVE-2026-76716
Multiple vulnerabilities exist in the Analytics and Location Engine (ALE) that may allow for unauthorized access or denial of service. An unauthenticated remote attacker could exploit these vulnerabilities by sending specially crafted input or leveraging improper security configurations. Successful exploitation could result in a denial of service condition or unauthorized access to sensitive information.

🎖@cveNotify

🚨 CVE-2026-76717
A vulnerability exists in the Analytics and Location Engine (ALE) API that may allow for the disclosure of sensitive information. An unauthenticated remote attacker could exploit this vulnerability by providing specially crafted input to a specific API endpoint. Successful exploitation could result in the disclosure of sensitive user information, including password hashes, which could be used to facilitate further attacks.

🎖@cveNotify

🚨 CVE-2026-67236
RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.8 and 4.3.2, a successful POST /login caused is_authorized/2 to set an auth cookie containing base64-encoded username:password credentials without HttpOnly, Secure, SameSite, or expiration protections. Because base64 is encoding rather than encryption, an attacker with same-origin cross-site scripting, an HTTP-readable network position, or local access to the browser cookie store could recover the actual login credentials; older browsers that treated an absent SameSite attribute as None also sent the cookie cross-site. This issue is fixed in versions 4.2.8 and 4.3.2.

🎖@cveNotify

🚨 CVE-2026-85291
InvoicePlane is a self-hosted open source application for managing invoices, clients, and payments. Prior to 1.7.2, InvoicePlane's Users::change_password() method accepts a user_id from the URL and updates that account's password without an object-level authorization check. An authenticated secondary administrator can target the primary administrator account and replace its password without knowing the current password. The attacker can then take over the primary account and access its data and privileges. This issue is fixed in version 1.7.2.

🎖@cveNotify

🚨 CVE-2026-67222
RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, mechanisms/1 applied list_to_atom/1 to every colon-delimited token in an attacker-controlled auth_mechanism value, permanently consuming Erlang VM atoms and allowing the node to be crashed with a large request. Exploitation requires the Shovel or Federation plugin to be in use, and setting auth_mechanism requires the policymaker tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6.

🎖@cveNotify

🚨 CVE-2026-49470
GLPI is a free asset and IT management software package. From 11.0.0 until 11.0.8, the time-based one-time password verification endpoint does not limit failed submissions per user. An attacker who has obtained a user's primary authentication credentials can repeatedly submit TOTP values against the MFA verification flow, making brute-force compromise of the second factor and subsequent account takeover possible. This issue is fixed in version 11.0.8.

🎖@cveNotify

🚨 CVE-2025-1218
The mysqlnd wire protocol parser reads fields out of server packets before checking that the packet still holds enough bytes for them. A malicious or compromised MySQL server can send a truncated packet and make the client read past the end of the packet buffer, which is undefined behaviour and can crash the process.

🎖@cveNotify

🚨 CVE-2026-100369
CliInvoke and its formerly named `AlastairLundy.CliInvoke` package are .NET libraries for invoking command-line programs and wrapping executable processes. `CliInvoke` versions 2.0.0 through 2.8.4, 2.9.0 through 2.9.3, 2.10.0 through 2.10.4, and 3.0.0-alpha.1 through 3.0.0-beta.1, as well as `AlastairLundy.CliInvoke` versions 2.0.0-alpha.1 through 2.0.0, contain an argument-injection vulnerability in `RunnerProcessFactory` on the 2.x line and `RunnerConfigurationFactory` on the 3.x line. These factories combine runner arguments, a caller-controlled target, and caller-controlled arguments into one `ProcessStartInfo.Arguments` string, allowing a double quote in the target or an argument to terminate an operating-system-level quoted region and inject unintended elements into the runner’s argument vector, potentially resulting in arbitrary command execution when a shell runner is used. The vulnerability is patched in `CliInvoke` versions 2.8.5, 2.9.4, 2.10.5, and 3.0.0-beta.2, and in `AlastairLundy.CliInvoke` version 2.0.2. No complete workaround is available; users unable to upgrade can partially mitigate the issue by removing double quotes from targets and arguments, additionally removing shell metacharacters when using shell runners, or bypassing the vulnerable factory and constructing a `ProcessConfiguration` with an explicit `ArgumentList`.

🎖@cveNotify

🚨 CVE-2026-91765
cleanup_xml_node() in the SOAP XML parser recurses once per XML nesting level with no depth limit. An unauthenticated attacker can post a SOAP request containing tens of thousands of nested elements to any SoapServer endpoint, exhaust the stack and crash the process. The same unbounded recursion exists in the SOAP value decoder and in the WSDL node search helper.

🎖@cveNotify

🚨 CVE-2026-91766
When the http:// stream wrapper follows a redirect it forwards the user-supplied Authorization, Cookie and Proxy-Authorization headers unchanged, even when the redirect target is a different host, a different port, or a downgrade from HTTPS to HTTP. A server that can steer a redirect therefore receives credentials that were only meant for the original origin. This is the same class of issue that libcurl fixed in 7.58.0 ( CVE-2018-1000007 https://github.com/advisories/GHSA-g7x2-hrfp-pv5f ).

🎖@cveNotify

🚨 CVE-2026-91767
php_openssl_matches_wildcard_name() in ext/openssl/xp_ssl.c underflows the length argument passed to memchr() when a TLS server certificate presents a wildcard name whose literal characters are together longer than the hostname being verified. A malicious server presenting such a certificate makes the PHP client read up to SIZE_MAX bytes past the end of a heap allocation. The path is reachable from any default client stream, because verify_peer_name is enabled by default.

🎖@cveNotify

🚨 CVE-2026-91769
PHP's OpenSSL stream peer verification checks the certificate's subjectAltName entries first and, whenever no entry matches, falls back to the Common Name. RFC 6125 requires the CN to be ignored once the certificate presents any service identity, so a certificate carrying a non-matching DNS SAN was still accepted when its CN matched the requested peer_name. A certificate trusted by the client for one name can therefore be used to impersonate another.

🎖@cveNotify

🚨 CVE-2026-100419
gitoxide gix-fs before 0.23.0 contains a path validation bypass vulnerability in the worktree checkout mechanism that allows attackers to escape the worktree directory via symlink manipulation. During forced checkout with overwrite_existing enabled, attackers can craft malicious repository trees where symlink entries replace validated directories, causing subsequent files to be written outside the worktree through the symlink for code execution or file manipulation.

🎖@cveNotify

🚨 CVE-2026-91768
The IPv6 branch of the FastCGI client access check compares only the first 12 bytes of a 16-byte IPv6 address, so listen.allowed_clients matches on a /96 prefix instead of the exact address. An attacker who can source an address sharing the first 96 bits with an allowed one passes the check and reaches the FastCGI endpoint.

🎖@cveNotify

🚨 CVE-2026-92842
The convert.base64-encode, convert.quoted-printable-encode and convert.quoted-printable-decode stream filters accept a line-break-chars option whose length is tracked separately from the string itself. The filter constructors duplicate the value with pestrdup(), which stops at the first NUL byte, while keeping the original length. When the filter later emits a line break it copies the recorded length out of the truncated allocation, reading past its end and placing adjacent heap bytes into the filter output.

🎖@cveNotify

🚨 CVE-2026-57449
Actual is a local-first personal finance tool. Prior to 26.7.0, Actual Sync Server's CORS proxy is intended to let authenticated users fetch resources only from repositories listed in the official plugin allowlist. When `ACTUAL_GITHUB_TOKEN` is configured, the proxy automatically attaches the server's GitHub token to GitHub requests. The GitHub API allowlist check uses a raw `startsWith()` prefix test for `/repos/{owner}/{repo}` without requiring a path boundary after the repository name. If an allowlisted public plugin repository is `https://github.com/acme/plugin`, the proxy also accepts GitHub API URLs. Those URLs are outside the allowlisted repository but still pass because their API path starts with `/repos/acme/plugin`. The proxy then forwards the request with the server's `ACTUAL_GITHUB_TOKEN`, allowing any authenticated Actual user to read private GitHub resources reachable by that token. Version 26.7.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-96795
Horilla is an HR and CRM software. Prior to 2.0.0, HorillaListView.export_data in horilla_views/generic/cbv/views.py accepts an authenticated user's columns POST parameter, takes field_tuple[1], interpolates it into dynamic_fn_str as Python source, and passes the generated function definition to exec(). A crafted string that remains valid under ast.literal_eval can inject Python syntax into a default argument evaluated during function definition, allowing arbitrary operating-system commands to execute with the application process privileges, including root privileges in the shipped Docker image. This issue is fixed in version 2.0.0.

🎖@cveNotify

🚨 CVE-2026-72668
Unintended Proxy or Intermediary ('Confused Deputy') (CWE-441) in Kibana Agent Builder can lead to privilege escalation. A non-administrative user able to edit a shared agent could cause privileged operations to be carried out under the identity of a higher-privileged user who subsequently interacts with that agent. Where the same user can also author workflows, this can extend to full administrative control of Kibana and of the Elasticsearch cluster.

🎖@cveNotify

🚨 CVE-2025-71424
Contrast, Edgeless Systems' runtime for confidential containers on Kubernetes, is affected in versions up to and including 1.9.0. The VOLUME directive in a Dockerfile (config.volumes in the OCI image configuration) is only a hint and is not handled specially by Kubernetes, but containerd adds a mount point for it when Kubernetes sets none, requiring the runtime to be able to push arbitrary data to the Kata agent. As a result, on bare-metal Contrast deployments (AKS deployments are not affected) that run an image declaring at least one VOLUME for which no Kubernetes mount exists at that path, the untrusted host can write arbitrary file trees below that mount point inside the confidential container, compromising the integrity of a directory that is typically important to the application's core functionality. Version 1.9.1 fixes the issue by disallowing this configuration in `contrast generate`.

🎖@cveNotify

🚨 CVE-2026-100722
vm2 before 3.12.2 does not apply host-side Promise rejection handling in the sandbox-to-host construct trap. In BaseHandler, the apply trap calls markHostPromiseHandled() on the returned value, but the adjacent construct path returns the result of Reflect.construct without the same sanitization. If an embedder exposes a constructable host function whose constructor returns a native rejected Promise, an untrusted script executed via VM.run can invoke it with `new` and ignore the result; the rejected host Promise crosses the bridge unhandled and, under Node's strict unhandled-rejection policy, is promoted to an uncaught exception that terminates the host process.

🎖@cveNotify

🚨 CVE-2026-100833
Contrast (edgelesssys/contrast) versions 1.14.0 before 1.23.1 generate runtime policies that fail to detect all container image substitutions. A bad rebase during a Kata Containers update accidentally introduced an `allow_storage` rule that accepts storage entries using the `image_guest_pull` driver without verifying the image digest. An attacker with access to the Kata agent API — for example, a Kubernetes cluster administrator in Contrast's threat model — can therefore substitute a container image with an exploit payload, provided the substituted image satisfies the remaining policy rules, undermining the confidential container's integrity guarantees.

🎖@cveNotify