🚨 CVE-2026-100869
Sylius versions before 2.1.16 and 2.2.9 fail to restrict payment request actions in the Shop API endpoint, allowing customers to trigger refunds on completed orders. Attackers with order tokens can submit arbitrary payment actions like refunds that payment gateways execute while Sylius maintains order as paid, causing financial loss.

🎖@cveNotify

🚨 CVE-2026-100870
Sylius versions before 1.12.25, 1.13.17, 1.14.20, 2.1.16, and 2.2.9 build administrator password-reset links using the request Host header without validation, allowing unauthenticated attackers to redirect reset tokens to attacker-controlled domains. Attackers can request password resets for known administrator email addresses with forged Host headers to intercept valid reset tokens and take over administrator accounts.

🎖@cveNotify

🚨 CVE-2026-100871
Sylius versions before 1.12.25, 1.13.17, 1.14.20, 2.1.16, and 2.2.9 fail to include firewall identification in JWT tokens issued by separate Admin and Shop API endpoints. Attackers can register a shop customer account using an administrator's email address and obtain a token that the Admin API resolves to that administrator, granting full administrative access.

🎖@cveNotify

🚨 CVE-2026-100872
Sylius versions before 2.1.16 and 2.2.9 fail to validate payment amounts during cart recalculation, allowing unauthenticated attackers to modify order totals after gateway transaction initiation. Attackers can pay a small amount, enlarge the order after gateway capture, and have the system mark the inflated order as fully paid while the gateway captured only the original amount.

🎖@cveNotify

🚨 CVE-2026-101032
navi through 2.24.0 fails to properly escape cheatsheet variable values when substituting them into shell commands. Attackers can inject shell metacharacters through crafted file names in suggestion command directories to execute arbitrary commands with victim privileges.

🎖@cveNotify

🚨 CVE-2026-101033
KitchenOwl through 0.7.10 fails to verify that category IDs belong to the caller's household in expense and item operations. Authenticated attackers can enumerate category IDs from other households to read their category names, budgets, and colors, breaking household isolation.

🎖@cveNotify

🚨 CVE-2026-101041
The account recovery (password reset) functionality in the vulnerability-lookup web application contains a time-of-check-to-time-of-use (TOCTOU) race condition in the consumption of single-use recovery tokens. The original implementation verified the token nonce against the stored digest and then consumed (cleared) it in separate database operations. Two concurrent HTTP requests presenting the same valid recovery token could both pass the verification check before either transaction committed, allowing both to set their own password on the target account. The last transaction to commit overwrites the first, enabling an attacker who possesses a valid recovery token to replace the legitimate user's password with one of their choosing.

A secondary defect in the same endpoint (confirm_account) allowed a valid recovery link to be used to set an empty or trivially short password (e.g., three characters). The view handler performed only a manual equality comparison between the two password fields and never invoked the form's validation logic, bypassing the intended minimum-length and complexity constraints.

The affected component is the user account recovery endpoint (/user/confirm_account/<token>) and the associated token verification and consumption logic in the User model (website/models/user.py) and the view layer (website/web/views/user.py).

🎖@cveNotify

🚨 CVE-2026-100655
Netty (io.netty:netty-codec-http) versions up to and including 4.1.137.Final and from 4.2.0.Final through 4.2.17.Final accept an unlimited number of concurrent remote-initiated SPDY streams: SpdySessionHandler defaults localConcurrentStreams to Integer.MAX_VALUE and exposes no API to change it. A remote peer that opens a SPDY connection and sends millions of SYN_STREAM frames with FLAG_FIN=0 causes the server to allocate unbounded heap and direct memory, eventually triggering a JVM OutOfMemoryError and crashing the service. Fixed in 4.1.138.Final and 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100656
Netty (io.netty:netty-codec-http) contains an unbounded per-connection queue growth flaw in HttpServerCodec. The codec tracks the HTTP method of each still-unanswered pipelined request; the first 32 entries are bit-packed into a single long, but every additional entry is appended to methodOverflowQueue, an ArrayDeque with no size limit and no rejection path. A remote, unauthenticated attacker who pipelines HTTP/1.1 requests on a single connection while withholding reads on their own end (preventing responses from being flushed) can grow this queue without bound, causing unbounded heap growth and denial of service. Affected versions are 4.2.0.Final through 4.2.17.Final and all releases up to and including 4.1.137.Final; the issue is fixed in 4.2.18.Final and 4.1.138.Final.

🎖@cveNotify

🚨 CVE-2026-100657
Netty's STOMP codec (io.netty:netty-codec-stomp) contains a ByteBuf leak in StompSubframeDecoder. Once a frame's declared content-length has been fully read, the decoder allocates a chunk buffer from the channel allocator and parks it in an instance field while waiting for the single NUL byte that terminates the frame. If that byte never arrives, the buffer is never released: the replay Signal thrown by skipNullCharacter extends Error rather than Exception, so the decoder's catch(Exception) release path does not run, and StompSubframeDecoder overrides neither handlerRemoved0 nor channelInactive, so the buffer also survives channel teardown. A remote peer can leak one allocator buffer per connection by sending a complete, well-formed frame body and withholding its terminating NUL byte; with the default pooled allocator the memory is never returned to the pool or reclaimed by garbage collection, so the leak accumulates for the lifetime of the process and can lead to memory exhaustion. This affects versions up to and including 4.1.137.Final and versions 4.2.0.Final through 4.2.17.Final; it is fixed in 4.1.138.Final and 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100658
Netty (io.netty:netty-codec-http) contains an unbounded per-connection queue in WebSocketServerExtensionHandler. The handler offers an entry to its per-channel validExtensions queue for every inbound HttpRequest, but polls an entry only when the application writes an HttpResponse, and the queue size is never bounded. A remote, unauthenticated peer can use HTTP/1.1 pipelining to send requests faster than the application produces responses — including plain non-upgrade HTTP requests to any path — causing the queue to grow without limit until the JVM exhausts heap memory and terminates with OutOfMemoryError. Because the affected handler is the base class of WebSocketServerCompressionHandler, any server that enables permessage-deflate is exposed on its plain HTTP port before any WebSocket upgrade completes and before any application-level authentication. Affected versions are 4.1.88.Final through 4.1.137.Final and 4.2.0.Final through 4.2.17.Final; the issue is fixed in 4.1.138.Final and 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100659
Netty's HTTP/3 codec (io.netty:netty-codec-http3) in versions 4.2.0.Final through 4.2.17.Final does not enforce the RFC 9114 requirement that the :authority pseudo-header field and a literal host header field, when both present, carry the same value. A remote unauthenticated peer can send a single HEADERS frame containing both fields with differing, attacker-controlled values; the request is accepted and delivered to the application with two conflicting authorities, allowing routing, virtual-host, and access-control decisions to be bypassed when different components in the request path consult different fields. This issue is fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100660
Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.0.Final through 4.2.17.Final retains unbounded per-stream QPACK encoder state. QpackEncoder stores a queue and a dynamic-table index tracker for every encoded field section that references the QPACK dynamic table, keyed by the peer-controlled QUIC stream ID, and these entries are released only when the remote decoder sends a Section Acknowledgment or Stream Cancellation instruction — not when the HTTP/3 stream completes. There is no limit on the number of tracked streams, field sections, or retained bytes. A remote, unauthenticated HTTP/3 client can advertise a non-zero QPACK dynamic-table capacity, acknowledge the table insertion so the server reuses a dynamically indexed response header, and then omit all mandatory Section Acknowledgments while issuing sequential requests over a single QUIC connection, bypassing concurrent-stream limits and causing unbounded heap growth until the server exhausts memory (denial of service). Fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100661
Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain a denial-of-service vulnerability in the QPACK prefixed-integer decoder (QpackUtil.decodePrefixedInteger), which does not bound the number of continuation bytes it will process. A remote, unauthenticated peer can open a QPACK unidirectional stream (type 0x02 encoder or 0x03 decoder) and send a first byte with all prefix bits set (e.g. 0xFF for a 7-bit prefix or 0x3F for a 5-bit prefix) followed by an endless run of 0x80 continuation bytes. The decoder returns -1 ('need more bytes'), so callers never consume the input, the ByteToMessageDecoder cumulator grows without bound, and each decode() invocation re-scans the whole accumulated buffer, yielding O(N^2) CPU cost. The result is unbounded per-connection heap growth (OutOfMemoryError) and event-loop CPU starvation, reachable in every configuration. Fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100662
Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain an uncontrolled resource consumption vulnerability in the QPACK encoder-stream instruction decoder (QpackEncoderHandler, installed on the peer-initiated unidirectional QPACK encoder stream, type 0x02). The handler accepts an attacker-declared string-literal length of up to Integer.MAX_VALUE (~2 GiB) for the Name Length and Value Length fields of the "Insert With Literal Name" instruction (RFC 9204 §4.3.3), with no per-instruction or per-literal length cap and no cumulation-size limit; the existing HTTP/3 limits (maxHeaderListSize, maxUnknownFramePayloadLength, DEFAULT_MAX_FIELD_SECTION_SIZE) are not applied to this handler. A remote, unauthenticated peer with an established HTTP/3 connection to a default Netty HTTP/3 server can declare a very large literal length and then trickle fewer bytes than declared, causing the ByteToMessageDecoder MERGE cumulator to retain and grow the per-connection buffer, and ultimately triggering a large byte-array allocation. This leads to unbounded per-connection heap growth and OutOfMemoryError, resulting in denial of service. Fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100663
Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.2.Final through 4.2.17.Final does not special-case HTTP/1 CONNECT authority-form request-targets when converting HTTP/1 messages to HTTP/3 in HttpConversionUtil.toHttp3Headers. The authority-form target (e.g., "CONNECT trusted.example:443") is parsed as a URI, so its host is emitted as :scheme, :path is set to "/", and the HTTP/1 Host header is used as :authority; if no Host header is present the CONNECT target is dropped. In a Netty-based HTTP/1-to-HTTP/3 proxy or gateway, a remote client can send a CONNECT request whose Host header names a different authority than the request-target, producing a malformed HTTP/3 CONNECT whose tunnel :authority is attacker-controlled. This can bypass tunnel allow-lists, egress policy, backend selection, or audit controls that validate the HTTP/1 CONNECT request-target before forwarding over HTTP/3. The issue is fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100664
Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.2.Final through 4.2.17.Final builds the HTTP/3 :authority pseudo-header from the HTTP/1 Host header before considering the authority of an absolute-form HTTP/1 request-target. In HttpConversionUtil.toHttp3Headers(HttpMessage, boolean) — reached via Http3FrameToHttpObjectCodec(false) — a non-empty Host header takes precedence over the request-target authority, contrary to the HTTP/1.1 rule that a server receiving an absolute-form request-target must ignore the Host header. In a Netty-based HTTP/1-to-HTTP/3 gateway, proxy, or protocol bridge, a remote client can send a request such as "GET https://trusted.example/admin HTTP/1.1" with "Host: attacker.example", causing components that validate, authorize, or route on the RFC-defined request-target authority to reach a different decision than the upstream HTTP/3 peer, which receives :authority derived from the conflicting Host header. This authority confusion can affect virtual-host routing, allow-list checks, backend selection, cache keys, and URL generation. The advisory reports integrity impact only (no code execution, memory corruption, or availability impact). Fixed in 4.2.18.Final.

🎖@cveNotify

🚨 CVE-2026-100665
Netty versions from 4.2.11.Final before 4.2.18.Final contain an incomplete hostname verification fix in the QUIC certificate verification path when using a plain X509TrustManager. The BoringSSLCertificateVerifyCallback discards the SSLEngine for plain trust managers, preventing endpoint identification from running even when HTTPS verification is configured. Attackers on the network path can present a certificate chain for the wrong hostname that the plain trust manager accepts, bypassing hostname authentication for QUIC clients.

🎖@cveNotify

🚨 CVE-2026-100666
Netty's HttpServerCodec (io.netty:netty-codec-http) in versions 4.2.0.Final through 4.2.16.Final and in versions up to and including 4.1.136.Final pairs each outbound response with an inbound request by calling pollMethod() once per response, including for 1xx informational responses. If a client pipelines an HTTP/1.1 GET carrying an Expect: 100-continue header followed by a HEAD request, the 100 Continue response consumes the queued GET method, so the subsequent 200 OK for the GET is paired with HEAD and its body is dropped, while the following 200 OK for the HEAD request is written with a body. This desynchronizes HTTP parsing on the connection: the GET entity is never delivered and the HEAD response body is interpreted as the GET body, resulting in response splitting and unsafe connection reuse. Fixed in 4.2.17.Final and 4.1.137.Final.

🎖@cveNotify

🚨 CVE-2026-100672
The Comments plugin (getgrav/grav-plugin-comments) for Grav CMS through version 1.2.10 registers an admin handler that returns comment data as JSON without any authentication check. The handler branches on isAdmin(), which only indicates that the admin service is registered on the current route rather than that the visitor is authenticated, and it echoes the JSON and calls exit() during the plugins stage, before the classic Admin plugin would render its login screen. On a site using the classic Admin plugin with Comments enabled (the default), an unauthenticated remote attacker can request /admin/comments/page:<n> (e.g. page:0.001) and retrieve every comment from the last 7 days, including each commenter's email address and the absolute server filesystem path of the data file. Sites running the Grav 2.0 Admin Next stack (admin2 + api) are not affected via this path. The issue is fixed in 1.2.11, which requires an authenticated user with admin.comments or admin.super and removes the absolute filePath from the response.

🎖@cveNotify

🚨 CVE-2026-100673
The Grav Data Manager plugin (getgrav/grav-plugin-datamanager) versions 1.0.1 through 1.4.4 render stored data entries in the item-detail view (admin/templates/partials/item.html.twig) without escaping, applying Twig's `raw` filter — in some cases after a striptags('<br>') call that PHP's strip_tags() bypasses by preserving allowed tags together with their attributes. An unauthenticated visitor who submits a front-end form whose submissions are saved to user/data can store an HTML payload that executes as JavaScript in the session and origin of an administrator who later opens that entry in the classic admin panel, running with that administrator's privileges and CSRF token. Execution occurs without further interaction for list values (such as checkbox or multi-select fields) and on hover for ordinary text fields. Sites using the Grav 2.0 Admin Next interface are not affected, because it renders the same data through a separate, correctly escaping code path. The issue is fixed in Data Manager 1.4.5.

🎖@cveNotify