🚨 CVE-2026-83944
Improper access control in Azure Logic Apps allows an unauthorized attacker to elevate privileges over a network.

🎖@cveNotify

🚨 CVE-2026-85917
Server-side request forgery (ssrf) in Azure AI Foundry allows an unauthorized attacker to elevate privileges over a network.

🎖@cveNotify

🚨 CVE-2026-69843
Authentication bypass by spoofing in Microsoft Fabric allows an unauthorized attacker to elevate privileges over a network.

🎖@cveNotify

🚨 CVE-2026-83946
Improper neutralization of input during web page generation ('cross-site scripting') in Azure Portal allows an unauthorized attacker to perform spoofing over a network.

🎖@cveNotify

🚨 CVE-2026-57229
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the SMTP MIME parser in rust/src/mime/smtp.rs does not fully reset state when processing Content-Type: message/rfc822 encapsulation. An outer MIME part's encoding or filename state can leak into the inner message, allowing crafted mail to evade detections based on file.data, file.name, or extracted URLs when SMTP MIME decoding is enabled. This issue is fixed in version 8.0.6.

🎖@cveNotify

🚨 CVE-2026-71855
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, src/flow-hash.c can treat an IPv4 and IPv6 flow as equal without comparing the IP family when their raw address words, ports, protocol, VLAN, recursion level, live device, and hash bucket align. An IPv6 packet can therefore reuse IPv4 flow state or the reverse, causing incorrect flowbit state, detection bypass, or IP-only bypass. This issue is fixed in versions 8.0.6 and 7.0.17.

🎖@cveNotify

🚨 CVE-2026-52743
GoCD is a continuous deliver server. Prior to 26.1.0, the internal GoCD UI /jobStatus.json API does not validate that a requested server-assigned job ID belongs to the pipeline and stage named in the request. An authenticated user can guess job IDs and retrieve status for jobs in pipelines the user cannot otherwise view, including job names, state, progress timestamps, assigned agent IP addresses and UUIDs, and associated stages and pipelines. The response does not expose console output, artifacts, commands, variables, or configuration. This issue is fixed in version 26.1.0.

🎖@cveNotify

🚨 CVE-2026-54584
mport is the MidnightBSD Package Manager. mport before 2.7.8 used TMPDIR while extracting package metafiles, including when running as root or in setuid/setgid contexts. An attacker able to control the environment for a privileged mport invocation could redirect temporary metadata extraction to an attacker-controlled location. PR 123 ignores unsafe TMPDIR values in privileged contexts and rejects empty TMPDIR. This issue has been patched in version 2.7.8.

🎖@cveNotify

🚨 CVE-2026-68919
GoCD is a continuous deliver server. From 13.3.0 until 26.1.0, GoCD does not correctly encode and escape malicious material modification comments that mimic the special trackback format used by package materials when rendering the Stage Detail, Job/Build Detail, Value Stream Map, and Pipeline History views. A user with write access to a material tracked by GoCD can store arbitrary HTML or JavaScript in a forged package material comment, which executes in the browser session of a user who later views an affected page. Exploitation requires a victim to view a page that renders the malicious modification, and GoCD does not render every material comment in every view. Successful exploitation can expose a privileged user session or allow changes using the victim's credentials and privileges. This issue is fixed in version 26.1.0.

🎖@cveNotify

🚨 CVE-2026-71543
OpenBao is an open source identity-based secrets management system. Prior to 2.6.0, templated ACL, PKI, and SSH policies could substitute attacker-controlled identity data without rejecting syntax-significant characters. In ACL templated policies, asterisks, plus signs, and slashes could alter path matching. In PKI allowed_uri_sans_template and allowed_domains policies, an asterisk could broaden certificate issuance to unauthorized domains. In SSH allowed_users and allowed_domains policies, a comma could add unauthorized principals. Exploitation requires a deployment to use templated policy data that users can freely modify; templates based on the randomly generated identity.entity.id value are not affected. This could allow privilege escalation, unauthorized access, and unauthorized certificate issuance. This issue is fixed in version 2.6.0.

🎖@cveNotify

🚨 CVE-2026-87902
An unauthenticated attacker can make `get_page_template()` page-template resolution include a chosen readable local `.php` file outside the active theme directories. If relevant pre-conditions for both the server and the active theme are met, this can lead to RCE.

🎖@cveNotify

🚨 CVE-2026-88340
An invalid pointer release vulnerability exists in YARA 4.5.8 during deserialization of compiled .yrc rule files. The vulnerability is caused by insufficient validation of external-variable pointers, which may lead to invalid free in yr_rules_destroy() or wild pointer access in yr_object_create(). An attacker can provide a specially crafted .yrc file that causes memory corruption and application crash.

🎖@cveNotify

🚨 CVE-2026-67226
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.22 and 4.1.14 and 4.2.7, Admin-only atom exhaustion: PUT /api/users tags list. settags/2 maps rabbitdatacoercion:toatom/1 over the user's tags list. The 20 MB management body limit fits ~3-4M short tag strings. An administrator can crash the node in a single request by creating a user (or importing definitions) with ~1M unique tag administrator. This issue is fixed in versions 4.0.22 and 4.1.14 and 4.2.7.

🎖@cveNotify

🚨 CVE-2026-67234
RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.8 and 4.3.2, get_auth_mechanism/1 used term_to_binary/1 on the strict_auth_mechanism or preferred_auth_mechanism atom when clearing the corresponding cookie, producing a non-ASCII cookie name that violates RFC 6265 and can prevent the browser from deleting the preference. The issue is not directly exploitable for code execution or data exfiltration; its security relevance is limited to stale authentication-mechanism preferences persisting across logout and login cycles. This issue is fixed in versions 4.2.8 and 4.3.2.

🎖@cveNotify

🚨 CVE-2026-67242
RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, OAuth2 isinteger(Exp) guard skips token-expiry checks for float exp. validatetokenexpiry/1 (lines 208-214) and expirytimestamp/1 (138-144) both guard with 'when isinteger(Exp)' and fall through to ok/never for float values. josejwt:verify validates only the signature, not exp. With float exp, no expiry validation occurs anywhere in the If the IdP emits exp as a JSON float (RFC 7519 permits fractional NumericDate), both the login-time expiry check and the mid-connection disconnect timer are silently skipped , an already-expired token is accepted, and connections never time OAuth2 backend enabled IdP emits float exp (uncommon; mainstream IdPs emit integers) Attacker possesses a previously-valid signed. This issue is fixed in versions 4.2.9 and 4.3.3.

🎖@cveNotify

🚨 CVE-2026-67408
RabbitMQ is a messaging and streaming broker. From 4.1.0 until 4.3.3, 4.2.9, and 4.1.11, Stream Management Super-Stream Binding Keys Allocation Allows Low-Privilege Node Denial of Service. rabbitMQ 4.3.1 with rabbitmqstreammanagement enabled accepts PUT /api/stream/super-streams/{vhost}/{name} requests from an authenticated management user that can access the target vhost. When the request body contains the binding-keys field, the handler parses the attacker-controlled comma-separated string and builds the full stream-name list before checking whether the user has permission to configure the resulting streams. A low-privileged management user with vhost access but no configure, write, or read permission can therefore force large transient allocations before the resource permission check. In a 768 MB memory-limited container, one HTTP PUT with about 4.5 MB of JSON body killed the RabbitMQ container with Docker state exited true An authenticated low-privileged management user can kill a memory-limited RabbitMQ node with one HTTP This issue is fixed in versions 4.3.3, 4.2.9, and 4.1.11.

🎖@cveNotify

🚨 CVE-2026-67415
RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, the Shovel parameter parser converted attacker-controlled runtime parameter values into non-garbage-collected Erlang atoms before bounding them or checking a fixed allowlist. Exploitation requires network access to the Management HTTP API, valid credentials with both the management and policymaker tags, permission to set Shovel runtime parameters on a vhost, and the rabbitmq_shovel and rabbitmq_shovel_management plugins to be enabled. The attacker can exhaust the node-wide atom table and deny service, and malicious parameters are stored durably and reparsed when workers start, so atom pressure can recur after restart without a live attacker connection. This issue is fixed in versions 4.2.9 and 4.3.3.

🎖@cveNotify

🚨 CVE-2026-67421
RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ Management rendered an AMQP authorization-error reason containing an attacker-controlled queue name as HTML when the OAuth management UI was enabled. Exploitation requires an attacker with queue configure permission, a management administrator who can see but cannot read that queue, and the administrator clicking Get Message(s). A queue name containing a base element can then retarget the automatic relative refresh because the Content Security Policy omits base-uri and connect-src, and an attacker endpoint that permits the management origin through CORS can receive the victim's Authorization header. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5.

🎖@cveNotify

🚨 CVE-2026-56726
Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.2, this vulnerability breaks normal ticket isolation boundaries between agents. Any authenticated agent, even one with no active tickets assigned to them, can view the titles, status, labels, and URL links of GitHub/GitLab issues attached to any ticket in the system. This allows an internal user to systematically view GitHub/GitLab issue data linked by other agents or administrators across the organization by simply querying random or sequential ticket IDs. This vulnerability is fixed in 7.0.2.

🎖@cveNotify

🚨 CVE-2026-56731
Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.1, a low-privilege authenticated user may inject arbitrary HTML markup, including JavaScript event handlers, into a ticket title via the standard ticket creation workflow. The title is persisted without sanitization. This issue is fixed in version 7.0.1.

🎖@cveNotify

🚨 CVE-2026-45801
GLPI is a free asset and IT management software package. From 0.72 until 10.0.26 and 11.0.8, an authenticated user without the required permission can enable debug mode. The affected user-setting update does not enforce the privilege boundary intended to restrict debug-mode activation. This issue is fixed in versions 11.0.8 and 10.0.26.

🎖@cveNotify