🚨 CVE-2026-97863
The cisco_firesight_manager_ACL_rule_export module in misp-modules generates a shell script (.sh) that authenticates to and calls the Cisco fireSIGHT Manager API. The module interpolates configuration values (IP address, login, password, domain ID, policy ID) and MISP attribute values (destination IPs, URLs, event info comments) directly into single-quoted shell string assignments without any escaping or sanitization. Because the values are placed inside single-quoted shell strings, any value containing a single-quote character (e.g., a crafted ip-dst or url attribute value submitted to MISP) breaks out of the quoting context, allowing an attacker to inject arbitrary shell commands into the exported script. A security analyst who subsequently executes the generated .sh file unmodified would run the injected commands with their own privileges, potentially exposing fireSIGHT Manager credentials, modifying ACL rules, or compromising the analyst workstation. Additionally, the module contained a secondary defect where the variable 'config' was only assigned inside a conditional block but referenced unconditionally afterward, causing a NameError (denial of service) when the request payload lacked a 'config' key. The vulnerability requires the attacker to have the ability to submit MISP events or attributes containing a single-quote character and the victim to execute the exported script. No authentication bypass is required beyond standard MISP event-submission privileges.
🎖@cveNotify
The cisco_firesight_manager_ACL_rule_export module in misp-modules generates a shell script (.sh) that authenticates to and calls the Cisco fireSIGHT Manager API. The module interpolates configuration values (IP address, login, password, domain ID, policy ID) and MISP attribute values (destination IPs, URLs, event info comments) directly into single-quoted shell string assignments without any escaping or sanitization. Because the values are placed inside single-quoted shell strings, any value containing a single-quote character (e.g., a crafted ip-dst or url attribute value submitted to MISP) breaks out of the quoting context, allowing an attacker to inject arbitrary shell commands into the exported script. A security analyst who subsequently executes the generated .sh file unmodified would run the injected commands with their own privileges, potentially exposing fireSIGHT Manager credentials, modifying ACL rules, or compromising the analyst workstation. Additionally, the module contained a secondary defect where the variable 'config' was only assigned inside a conditional block but referenced unconditionally afterward, causing a NameError (denial of service) when the request payload lacked a 'config' key. The vulnerability requires the attacker to have the ability to submit MISP events or attributes containing a single-quote character and the victim to execute the exported script. No authentication bypass is required beyond standard MISP event-submission privileges.
🎖@cveNotify
GitHub
fix: [cisco_firesight_manager_ACL_rule_export] shell-escape interpola… · MISP/misp-modules@625b549
…ted values in generated script
The module builds a shell script that authenticates to and calls the Cisco
fireSIGHT manager API, interpolating the module config (IP, login,
password, domain/polic...
The module builds a shell script that authenticates to and calls the Cisco
fireSIGHT manager API, interpolating the module config (IP, login,
password, domain/polic...
🚨 CVE-2026-97898
Insecure Direct Object Reference / missing object-level authorization in the Akia keyless entry cloud service. The unlock action is relying on a client-supplied room/door identifier that is not properly authorized server-side against the authenticated guest's booking. An authenticated guest could unlock rooms other than their own, resulting in unauthorized physical access to guest rooms at an affected property.
As of 19th September 2026 the service is no more vulnerable to this attack (feedback received by the reporter).
The attack is remote but the effect is local to an affected property.
🎖@cveNotify
Insecure Direct Object Reference / missing object-level authorization in the Akia keyless entry cloud service. The unlock action is relying on a client-supplied room/door identifier that is not properly authorized server-side against the authenticated guest's booking. An authenticated guest could unlock rooms other than their own, resulting in unauthorized physical access to guest rooms at an affected property.
As of 19th September 2026 the service is no more vulnerable to this attack (feedback received by the reporter).
The attack is remote but the effect is local to an affected property.
🎖@cveNotify
Akia
AI Agent for Hospitality | Akia — Guest Experience Platform
Akia is the AI agent that autonomously manages your entire guest lifecycle — from booking to checkout. Trusted by 2,000+ hospitality operators.
🚨 CVE-2026-100172
The AIL Framework (ail-project/ail-framework) contains a stored cross-site scripting (XSS) vulnerability in two Jinja2 templates that render popovers for matched, tracked, or tagged content: var/www/templates/chats_explorer/block_message.html and var/www/templates/objects/item/show_item.html. In both templates, dynamic values associated with this content, including icon color, icon style, icon glyph, subtype, identifier, name, description, and matched value, are interpolated directly into the data-content HTML attribute of Bootstrap popover elements without appropriate output encoding. Because the popovers are configured with data-html="true", the content is interpreted as HTML in the victim's browser. An authenticated attacker who can influence matched, tracked, or tagged content may inject arbitrary HTML or JavaScript into these values. When a victim displays the affected popover, the injected markup may execute in the victim's session, potentially enabling data exfiltration or actions with the victim's privileges. The vulnerability is classified as stored XSS because the malicious payload can persist in the affected match, tracking, or tag-related data and be delivered to users who view the affected content.
🎖@cveNotify
The AIL Framework (ail-project/ail-framework) contains a stored cross-site scripting (XSS) vulnerability in two Jinja2 templates that render popovers for matched, tracked, or tagged content: var/www/templates/chats_explorer/block_message.html and var/www/templates/objects/item/show_item.html. In both templates, dynamic values associated with this content, including icon color, icon style, icon glyph, subtype, identifier, name, description, and matched value, are interpolated directly into the data-content HTML attribute of Bootstrap popover elements without appropriate output encoding. Because the popovers are configured with data-html="true", the content is interpreted as HTML in the victim's browser. An authenticated attacker who can influence matched, tracked, or tagged content may inject arbitrary HTML or JavaScript into these values. When a victim displays the affected popover, the injected markup may execute in the victim's session, potentially enabling data exfiltration or actions with the victim's privileges. The vulnerability is classified as stored XSS because the malicious payload can persist in the affected match, tracking, or tag-related data and be delivered to users who view the affected content.
🎖@cveNotify
GitHub
chg: [security] fix XSS in show item and message popover of extracted… · ail-project/ail-framework@ee63a0a
… matches. Reported by Jeroen Pinoy.
Prevent stored XSS in item and chat-message extracted-content popovers by double-escaping dynamic values embedded in HTML-enabled attributes.
Prevent stored XSS in item and chat-message extracted-content popovers by double-escaping dynamic values embedded in HTML-enabled attributes.
🚨 CVE-2026-100174
The AIL Framework tag selector component (var/www/static/js/tags.js) is vulnerable to stored cross-site scripting (XSS). A user with the ability to create a custom tag could embed an HTML payload containing JavaScript event handlers (e.g., <img src=x onerror=alert(1)> or <svg onload=...>) in the tag name. When another authenticated user opened a page containing the tag selector, the malicious tag name was inserted into the DOM using jQuery's html property, causing the embedded script to execute in the victim's browser context.
The vulnerable code paths affected both the suggestion/combo-item rendering (_renderComboItems) and the selected-tag rendering logic. In both cases, the display value derived from the tag's displayField was passed directly to the html property of a jQuery element constructor, which parses and inserts the string as raw HTML rather than as text.
Preconditions: the attacker must have an authenticated account with permission to create custom tags, and the victim must be an authenticated user who views a page that renders the tag selector with the attacker's stored tag. The attack is stored (persistent) and does not require the victim to perform any action beyond loading the page.
Security impact: successful exploitation allows arbitrary JavaScript execution in the victim's browser within the application's origin, potentially leading to session hijacking, unauthorized data access, form manipulation, or further client-side attacks.
🎖@cveNotify
The AIL Framework tag selector component (var/www/static/js/tags.js) is vulnerable to stored cross-site scripting (XSS). A user with the ability to create a custom tag could embed an HTML payload containing JavaScript event handlers (e.g., <img src=x onerror=alert(1)> or <svg onload=...>) in the tag name. When another authenticated user opened a page containing the tag selector, the malicious tag name was inserted into the DOM using jQuery's html property, causing the embedded script to execute in the victim's browser context.
The vulnerable code paths affected both the suggestion/combo-item rendering (_renderComboItems) and the selected-tag rendering logic. In both cases, the display value derived from the tag's displayField was passed directly to the html property of a jQuery element constructor, which parses and inserts the string as raw HTML rather than as text.
Preconditions: the attacker must have an authenticated account with permission to create custom tags, and the victim must be an authenticated user who views a page that renders the tag selector with the attacker's stored tag. The attack is stored (persistent) and does not require the victim to perform any action beyond loading the page.
Security impact: successful exploitation allows arbitrary JavaScript execution in the victim's browser within the application's origin, potentially leading to session hijacking, unauthorized data access, form manipulation, or further client-side attacks.
🎖@cveNotify
GitHub
chg: [security] prevent stored XSS in tag selector · ail-project/ail-framework@b2d0ed0
A user able to create a custom tag could store an HTML payload containing JavaScript event handlers. When another authenticated user opened a page containing the tag selector, the malicious tag nam...
🚨 CVE-2026-100176
The AIL Framework's username timeline feature is vulnerable to stored cross-site scripting (XSS). Usernames imported from chats and crawled forums are stored without character restrictions. When an authenticated analyst views the username timeline, the application renders these stored usernames into the DOM using D3's html() method in the tooltip. Because the username value (d.obj) is interpolated directly into an HTML string without sanitization, a crafted username containing HTML event handlers (e.g., <img src=x onerror=alert(1)>) will execute arbitrary JavaScript in the analyst's browser when the analyst hovers over the corresponding timeline entry. The attack requires the victim to be an authenticated analyst with access to the timeline view and to interact with the malicious timeline entry (hover). Successful exploitation can lead to session hijacking, data exfiltration, or unauthorized actions performed within the analyst's authenticated session. The vulnerability resides in the client-side JavaScript file var/www/static/js/d3/timeline_basic.js.
🎖@cveNotify
The AIL Framework's username timeline feature is vulnerable to stored cross-site scripting (XSS). Usernames imported from chats and crawled forums are stored without character restrictions. When an authenticated analyst views the username timeline, the application renders these stored usernames into the DOM using D3's html() method in the tooltip. Because the username value (d.obj) is interpolated directly into an HTML string without sanitization, a crafted username containing HTML event handlers (e.g., <img src=x onerror=alert(1)>) will execute arbitrary JavaScript in the analyst's browser when the analyst hovers over the corresponding timeline entry. The attack requires the victim to be an authenticated analyst with access to the timeline view and to interact with the malicious timeline entry (hover). Successful exploitation can lead to session hijacking, data exfiltration, or unauthorized actions performed within the analyst's authenticated session. The vulnerability resides in the client-side JavaScript file var/www/static/js/d3/timeline_basic.js.
🎖@cveNotify
GitHub
chg: [security] fix XSS in username timeline tooltip. Reported by Jer… · ail-project/ail-framework@455dd92
…oen Pinoy
Escape user-controlled usernames before inserting them into the D3 timeline
tooltip as HTML.
Usernames imported from chats and crawled forums are stored without character
restrictions....
Escape user-controlled usernames before inserting them into the D3 timeline
tooltip as HTML.
Usernames imported from chats and crawled forums are stored without character
restrictions....
🚨 CVE-2026-100177
The AIL Framework crawler task creation API (api_add_crawler_task) contained an insufficient authorization check when a user supplied a cookiejar UUID to attach to a one-shot or scheduled crawler task. The original code only verified that the cookiejar existed and, if its access level was 0, compared the cookiejar's owning user ID to the requesting user ID. It did not validate organizational boundaries, did not account for the requesting user's role. When the cookiejar level was not 0, no access check was performed at all. An authenticated user could therefore reference another organization's cookiejar by UUID and have the crawler use that organization's stored cookies (session tokens, authentication credentials) when performing web crawls, effectively leaking or exfiltrating the victim organization's session data.
The vulnerability requires an authenticated user with the ability to create crawler tasks. The attacker must know or guess a valid cookiejar UUID belonging to another organization. The impact is unauthorized access to another organization's stored cookies and session data through the crawler infrastructure.
🎖@cveNotify
The AIL Framework crawler task creation API (api_add_crawler_task) contained an insufficient authorization check when a user supplied a cookiejar UUID to attach to a one-shot or scheduled crawler task. The original code only verified that the cookiejar existed and, if its access level was 0, compared the cookiejar's owning user ID to the requesting user ID. It did not validate organizational boundaries, did not account for the requesting user's role. When the cookiejar level was not 0, no access check was performed at all. An authenticated user could therefore reference another organization's cookiejar by UUID and have the crawler use that organization's stored cookies (session tokens, authentication credentials) when performing web crawls, effectively leaking or exfiltrating the victim organization's session data.
The vulnerability requires an authenticated user with the ability to create crawler tasks. The attacker must know or guess a valid cookiejar UUID belonging to another organization. The impact is unauthorized access to another organization's stored cookies and session data through the crawler infrastructure.
🎖@cveNotify
GitHub
chg: [security] crawler, enforce cookiejar ACL when creating crawl ta… · ail-project/ail-framework@3773ca3
…sks. Reported by Jeroen Pinoy.
Prevent users from attaching another organisation's cookiejar to one-shot or scheduled crawler tasks by applying the existing cookiejar view ACL.
Prevent users from attaching another organisation's cookiejar to one-shot or scheduled crawler tasks by applying the existing cookiejar view ACL.
🚨 CVE-2026-100187
The Onion module in AIL Framework contained a performance shortcut in its URL extraction logic that accepted URLs as valid .onion targets based solely on a length check (exactly 69 characters) and a suffix check (ending in ".onion"), without performing proper hostname parsing or onion-domain validation. An unauthenticated attacker who could publish or control web content crawled by the framework could embed a crafted URL containing an IP address or non-onion hostname with a path ending in ".onion" that satisfied the length and suffix conditions. Such a URL would be extracted, its domain naively sliced from the string, and queued as a legitimate onion crawler task. This allowed unauthenticated content publishers to inject arbitrary non-onion targets into the crawler's task queue, influencing crawler behavior and potentially directing it toward unintended network resources. The vulnerability required no authentication, no user interaction, and only the ability to place crafted content in a location the framework would crawl. The security impact is a loss of integrity in the crawler's target selection: the framework processes and acts upon URLs that do not correspond to legitimate .onion services.
🎖@cveNotify
The Onion module in AIL Framework contained a performance shortcut in its URL extraction logic that accepted URLs as valid .onion targets based solely on a length check (exactly 69 characters) and a suffix check (ending in ".onion"), without performing proper hostname parsing or onion-domain validation. An unauthenticated attacker who could publish or control web content crawled by the framework could embed a crafted URL containing an IP address or non-onion hostname with a path ending in ".onion" that satisfied the length and suffix conditions. Such a URL would be extracted, its domain naively sliced from the string, and queued as a legitimate onion crawler task. This allowed unauthenticated content publishers to inject arbitrary non-onion targets into the crawler's task queue, influencing crawler behavior and potentially directing it toward unintended network resources. The vulnerability required no authentication, no user interaction, and only the ability to place crafted content in a location the framework would crawl. The security impact is a loss of integrity in the crawler's target selection: the framework processes and acts upon URLs that do not correspond to legitimate .onion services.
🎖@cveNotify
GitHub
chg: [security] Onion module, prevent non-onion crawler task injectio… · ail-project/ail-framework@5c8a68b
…n. Reported by Jeroen Pinoy.
Remove the length-based onion URL shortcut that accepted attacker-controlled URLs without validating their hostname. A crafted URL containing an IP address and a path...
Remove the length-based onion URL shortcut that accepted attacker-controlled URLs without validating their hostname. A crafted URL containing an IP address and a path...
🚨 CVE-2026-100190
The AIL Framework crawler splash domain page (showDomain.html) is vulnerable to stored cross-site script injection (XSS). User-supplied data originating from imported crawler captures—specifically item IDs, URLs, and screenshot file paths—was interpolated directly into inline JavaScript contexts within the HTML template. This included an onclick attribute that embedded raw screenshot and URL values into a JavaScript function call, and an inline script block that assigned a screenshot value to a JavaScript variable without escaping. An attacker with a user-role API client could craft a malicious crawler capture import containing JavaScript payloads in these fields. When any user (including privileged users) subsequently viewed the affected domain page, the injected script would execute in the victim's browser context, potentially allowing session hijacking, data exfiltration, or unauthorized actions on behalf of the victim. The vulnerability is stored in the application's data layer and triggered upon page rendering, requiring no further interaction beyond loading the domain view.
🎖@cveNotify
The AIL Framework crawler splash domain page (showDomain.html) is vulnerable to stored cross-site script injection (XSS). User-supplied data originating from imported crawler captures—specifically item IDs, URLs, and screenshot file paths—was interpolated directly into inline JavaScript contexts within the HTML template. This included an onclick attribute that embedded raw screenshot and URL values into a JavaScript function call, and an inline script block that assigned a screenshot value to a JavaScript variable without escaping. An attacker with a user-role API client could craft a malicious crawler capture import containing JavaScript payloads in these fields. When any user (including privileged users) subsequently viewed the affected domain page, the injected script would execute in the victim's browser context, potentially allowing session hijacking, data exfiltration, or unauthorized actions on behalf of the victim. The vulnerability is stored in the application's data layer and triggered upon page rendering, requiring no further interaction beyond loading the domain view.
🎖@cveNotify
GitHub
chg: [security] prevent stored XSS through imported capture metadata … · ail-project/ail-framework@31376ee
…in showDomain. Reported by Jeroen Pinoy.
Remove capture-derived item IDs, URLs, and screenshot values from inline JavaScript contexts on the domain page. Store these values in escaped data attrib...
Remove capture-derived item IDs, URLs, and screenshot values from inline JavaScript contexts on the domain page. Store these values in escaped data attrib...
🚨 CVE-2026-0857
Use of a Password Hash With Insufficient Computational Effort in Mesalvo MEONA (MEONA Server and MEONA Client) for user accounts whose password was last set under a version before MEONA 2024.10. MEONA versions before 2024.10 protected stored passwords with SHA-1 (versions from October 2015) or stored them without protection (earlier versions). Since MEONA 2024.10 (June 2024) Argon2 is the default method and every password that is set or changed is stored with Argon2; passwords last set under an earlier version keep the earlier method until they are changed. An administrator could in addition select the storage method per account. A MEONA super administrator can read the stored value of such accounts in the user administration of the MEONA Client or export it through administrative database functions. Only accounts managed locally in MEONA are affected; accounts authenticated through the operating hospital's directory service (Active Directory / Entra ID) have no password stored in MEONA. In typical installations end users authenticate through the directory service and local accounts are limited to emergency and technical accounts.
Exploitation requires super administrator permissions in MEONA (or direct access to the MEONA database) from within the operating hospital's network; MEONA is operated exclusively within closed hospital networks without exposure to the public Internet, and where a hospital permits remote access to that network at all, it is only through the hospital's own remote-access infrastructure (e.g. VPN) under the hospital's control. Installations in which every password has been set or changed under MEONA 2024.10 or later are not affected. Mesalvo is not aware of any exploitation outside the reported security test.
This issue affects MEONA Server and MEONA Client in versions 2024.10, 2025.04 and 2026.03 (for accounts with passwords last set under earlier versions). MEONA 2025.04.24 and 2026.03.02 (planned Q4 2026) remove the legacy storage methods, require every affected account to set a new Argon2-protected password at next logon, and no longer display stored credential values in the user administration. See Mesalvo Security Advisory MSA-2026-002.
🎖@cveNotify
Use of a Password Hash With Insufficient Computational Effort in Mesalvo MEONA (MEONA Server and MEONA Client) for user accounts whose password was last set under a version before MEONA 2024.10. MEONA versions before 2024.10 protected stored passwords with SHA-1 (versions from October 2015) or stored them without protection (earlier versions). Since MEONA 2024.10 (June 2024) Argon2 is the default method and every password that is set or changed is stored with Argon2; passwords last set under an earlier version keep the earlier method until they are changed. An administrator could in addition select the storage method per account. A MEONA super administrator can read the stored value of such accounts in the user administration of the MEONA Client or export it through administrative database functions. Only accounts managed locally in MEONA are affected; accounts authenticated through the operating hospital's directory service (Active Directory / Entra ID) have no password stored in MEONA. In typical installations end users authenticate through the directory service and local accounts are limited to emergency and technical accounts.
Exploitation requires super administrator permissions in MEONA (or direct access to the MEONA database) from within the operating hospital's network; MEONA is operated exclusively within closed hospital networks without exposure to the public Internet, and where a hospital permits remote access to that network at all, it is only through the hospital's own remote-access infrastructure (e.g. VPN) under the hospital's control. Installations in which every password has been set or changed under MEONA 2024.10 or later are not affected. Mesalvo is not aware of any exploitation outside the reported security test.
This issue affects MEONA Server and MEONA Client in versions 2024.10, 2025.04 and 2026.03 (for accounts with passwords last set under earlier versions). MEONA 2025.04.24 and 2026.03.02 (planned Q4 2026) remove the legacy storage methods, require every affected account to set a new Argon2-protected password at next logon, and no longer display stored credential values in the user administration. See Mesalvo Security Advisory MSA-2026-002.
🎖@cveNotify
🚨 CVE-2026-22314
Improper Control of Generation of Code ('Code Injection') vulnerability in Mesalvo Meona Client Launcher Component, Mesalvo Meona Server Component enables code execution on other users' systems. This issue affects Meona Client Launcher Component: through 19.06.2020 15:11:49; Meona Server Component: through 2025.04 5+323020.
🎖@cveNotify
Improper Control of Generation of Code ('Code Injection') vulnerability in Mesalvo Meona Client Launcher Component, Mesalvo Meona Server Component enables code execution on other users' systems. This issue affects Meona Client Launcher Component: through 19.06.2020 15:11:49; Meona Server Component: through 2025.04 5+323020.
🎖@cveNotify
🚨 CVE-2026-25602
Insufficient Verification of Data Authenticity in the feedback function of Mesalvo MEONA (MEONA Client and MEONA Server). The MEONA Client transmits the recipient address of a feedback report to the MEONA Server, and the server sends the report to the transmitted address instead of the address configured on the server. The feedback function is available only in the MEONA administration area, which requires one of the administrative roles ADMINISTRATOR, SUPERADMINISTRATOR or TYPIST (catalogue editing), or the PHARMACIST role holding the PHARMACY_ADMINISTRATOR right, assigned explicitly by the operating hospital's administrators. Such a user who modifies the client request can cause the MEONA Server to send a message with content of the user's choosing, from the sender address configured on the server, to a recipient of the user's choosing, within the limits permitted by the operator's mail relay. The message can be used for social engineering because it appears to originate from an internal hospital system.
Exploitation requires a MEONA account with one of the administrative roles named above and access to the operating hospital's internal network; MEONA is operated exclusively within closed hospital networks without exposure to the public Internet, and where a hospital permits remote access to that network at all, it is only through the hospital's own remote-access infrastructure (e.g. VPN) under the hospital's control. The message contains only the recipient, subject and text entered by the user; no data of other users or patients is disclosed. Mesalvo is not aware of any exploitation outside the reported security test.
This issue affects MEONA Client and MEONA Server in versions 2024.10, 2025.04 (before 2025.04.24) and 2026.03 (before 2026.03.02). MEONA 2025.04.24 and 2026.03.02 (planned Q4 2026) enforce the configured recipient address on the server. Operators can restrict at their mail relay which recipients the MEONA sender address may reach.
🎖@cveNotify
Insufficient Verification of Data Authenticity in the feedback function of Mesalvo MEONA (MEONA Client and MEONA Server). The MEONA Client transmits the recipient address of a feedback report to the MEONA Server, and the server sends the report to the transmitted address instead of the address configured on the server. The feedback function is available only in the MEONA administration area, which requires one of the administrative roles ADMINISTRATOR, SUPERADMINISTRATOR or TYPIST (catalogue editing), or the PHARMACIST role holding the PHARMACY_ADMINISTRATOR right, assigned explicitly by the operating hospital's administrators. Such a user who modifies the client request can cause the MEONA Server to send a message with content of the user's choosing, from the sender address configured on the server, to a recipient of the user's choosing, within the limits permitted by the operator's mail relay. The message can be used for social engineering because it appears to originate from an internal hospital system.
Exploitation requires a MEONA account with one of the administrative roles named above and access to the operating hospital's internal network; MEONA is operated exclusively within closed hospital networks without exposure to the public Internet, and where a hospital permits remote access to that network at all, it is only through the hospital's own remote-access infrastructure (e.g. VPN) under the hospital's control. The message contains only the recipient, subject and text entered by the user; no data of other users or patients is disclosed. Mesalvo is not aware of any exploitation outside the reported security test.
This issue affects MEONA Client and MEONA Server in versions 2024.10, 2025.04 (before 2025.04.24) and 2026.03 (before 2026.03.02). MEONA 2025.04.24 and 2026.03.02 (planned Q4 2026) enforce the configured recipient address on the server. Operators can restrict at their mail relay which recipients the MEONA sender address may reach.
🎖@cveNotify
🚨 CVE-2026-73241
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.30.0, FreeRDP server-side RDSTLS in libfreerdp/core/rdstls.c accepts an attacker-supplied RDSTLS_TYPE_CAPABILITIES PDU while rdstls_server_authenticate is waiting for RDSTLS_TYPE_AUTHREQ, leaving resultCode at RDSTLS_RESULT_SUCCESS and allowing a remote unauthenticated client to bypass the RedirectionGuid, username, domain, or password checks. This issue is fixed in version 3.30.0.
🎖@cveNotify
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.30.0, FreeRDP server-side RDSTLS in libfreerdp/core/rdstls.c accepts an attacker-supplied RDSTLS_TYPE_CAPABILITIES PDU while rdstls_server_authenticate is waiting for RDSTLS_TYPE_AUTHREQ, leaving resultCode at RDSTLS_RESULT_SUCCESS and allowing a remote unauthenticated client to bypass the RedirectionGuid, username, domain, or password checks. This issue is fixed in version 3.30.0.
🎖@cveNotify
GitHub
[core,rdstls] tighten state and bounds checks · FreeRDP/FreeRDP@b05a951
FreeRDP is a free remote desktop protocol library and clients - [core,rdstls] tighten state and bounds checks · FreeRDP/FreeRDP@b05a951
🚨 CVE-2026-73242
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.30.0, FreeRDP's winpr/libwinpr/sspi/Kerberos/kerberos.c kerberos_DecryptMessage function fails to bound the peer-controlled GSS Wrap-token EC field before using it with RRC in IOV pointer offsets, allowing a malicious RDP peer to trigger out-of-bounds reads and in-place writes during CredSSP/NLA Kerberos decryption. This issue is fixed in version 3.30.0.
🎖@cveNotify
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.30.0, FreeRDP's winpr/libwinpr/sspi/Kerberos/kerberos.c kerberos_DecryptMessage function fails to bound the peer-controlled GSS Wrap-token EC field before using it with RRC in IOV pointer offsets, allowing a malicious RDP peer to trigger out-of-bounds reads and in-place writes during CredSSP/NLA Kerberos decryption. This issue is fixed in version 3.30.0.
🎖@cveNotify
GitHub
[winpr,sspi] tighten bounds checks for kerberos · FreeRDP/FreeRDP@0adf5e3
FreeRDP is a free remote desktop protocol library and clients - [winpr,sspi] tighten bounds checks for kerberos · FreeRDP/FreeRDP@0adf5e3
🚨 CVE-2026-72315
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq.
🎖@cveNotify
🚨 CVE-2026-72463
In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races.
🎖@cveNotify
🚨 CVE-2026-74304
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup().
🎖@cveNotify
🚨 CVE-2026-78002
A flaw was found in rsyslog. An unauthenticated remote attacker can trigger a heap buffer overflow in the RainerScript `replace()` function by sending specially crafted syslog messages. This vulnerability arises from an incorrect buffer size calculation during string replacement, causing memory corruption. Successful exploitation can lead to a denial of service (DoS) for the affected system.
🎖@cveNotify
A flaw was found in rsyslog. An unauthenticated remote attacker can trigger a heap buffer overflow in the RainerScript `replace()` function by sending specially crafted syslog messages. This vulnerability arises from an incorrect buffer size calculation during string replacement, causing memory corruption. Successful exploitation can lead to a denial of service (DoS) for the affected system.
🎖@cveNotify
🚨 CVE-2026-67276
RouterOS does not compare the complete RSA public key when matching an SSH authentication request to an authorized user key, checking the key type and modulus but omitting the exponent. Because signature verification uses the client-supplied key, an attacker knowing an authorized RSA modulus can supply a key with exponent one, forge a valid signature, and open an SSH command channel as the target user without the private key.This issue affects only 7.x branch was fixed in versions: 7.23.4 (Long-term) and 7.24.2 (Stable)
🎖@cveNotify
RouterOS does not compare the complete RSA public key when matching an SSH authentication request to an authorized user key, checking the key type and modulus but omitting the exponent. Because signature verification uses the client-supplied key, an attacker knowing an authorized RSA modulus can supply a key with exponent one, forge a valid signature, and open an SSH command channel as the target user without the private key.This issue affects only 7.x branch was fixed in versions: 7.23.4 (Long-term) and 7.24.2 (Stable)
🎖@cveNotify
cert.pl
Vulnerabilities in Mikrotik RouterOS software
CERT Polska has found 6 vulnerabilities (from CVE-2026-67276 to CVE-2026-67279, CVE-2026-67281 and CVE-2026-86060) in Mikrotik RouterOS software.
🚨 CVE-2026-67278
MikroTik RouterOS accepts malformed RSA/PKCS#1 v1.5 signatures across RSA-based services, including TLS/X.509 certificate validation and SSH host-key authentication. Because its trust store includes an e=3 root CA, an attacker controlling or redirecting an outbound RouterOS TLS connection can use the root’s public certificate - without its private key - to forge a trusted intermediate and issue certificates for arbitrary hostnames, enabling TLS server impersonation. The same permissive verification also undermines RSA-based SSH authentication.
This issue affects only 7.x branch was fixed in versions: 7.23.6 (Long-term) and 7.24.3 (Stable).
Releases 7.23.4 and 7.24.2 included an incomplete fix.
🎖@cveNotify
MikroTik RouterOS accepts malformed RSA/PKCS#1 v1.5 signatures across RSA-based services, including TLS/X.509 certificate validation and SSH host-key authentication. Because its trust store includes an e=3 root CA, an attacker controlling or redirecting an outbound RouterOS TLS connection can use the root’s public certificate - without its private key - to forge a trusted intermediate and issue certificates for arbitrary hostnames, enabling TLS server impersonation. The same permissive verification also undermines RSA-based SSH authentication.
This issue affects only 7.x branch was fixed in versions: 7.23.6 (Long-term) and 7.24.3 (Stable).
Releases 7.23.4 and 7.24.2 included an incomplete fix.
🎖@cveNotify
cert.pl
Vulnerabilities in Mikrotik RouterOS software
CERT Polska has found 6 vulnerabilities (from CVE-2026-67276 to CVE-2026-67279, CVE-2026-67281 and CVE-2026-86060) in Mikrotik RouterOS software.
🚨 CVE-2026-67279
RouterOS SSH enters the connection protocol after a client-requested rekey even though user authentication was never attempted, allowing an unauthenticated client to open a session channel and send an exec request. On affected builds the server dispatches the command, enabling unauthenticated creation, overwrite, and reconstruction of files in the RouterOS managed file namespace, including support files containing configuration and diagnostic data.This issue was fixed in versions: 6.49.21 (Long-term), 7.23.4 (Long-term) and 7.24.2 (Stable)
🎖@cveNotify
RouterOS SSH enters the connection protocol after a client-requested rekey even though user authentication was never attempted, allowing an unauthenticated client to open a session channel and send an exec request. On affected builds the server dispatches the command, enabling unauthenticated creation, overwrite, and reconstruction of files in the RouterOS managed file namespace, including support files containing configuration and diagnostic data.This issue was fixed in versions: 6.49.21 (Long-term), 7.23.4 (Long-term) and 7.24.2 (Stable)
🎖@cveNotify
cert.pl
Vulnerabilities in Mikrotik RouterOS software
CERT Polska has found 6 vulnerabilities (from CVE-2026-67276 to CVE-2026-67279, CVE-2026-67281 and CVE-2026-86060) in Mikrotik RouterOS software.
🚨 CVE-2026-69433
Heap-based buffer overflow in Windows Error Reporting allows an authorized attacker to elevate privileges locally.
🎖@cveNotify
Heap-based buffer overflow in Windows Error Reporting allows an authorized attacker to elevate privileges locally.
🎖@cveNotify