🚨 CVE-2026-93232
In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix boot panic with CONFIG_DEBUG_VM and HVO bootmem pages
Patch series "mm: Refactor bootmem gigantic hugepage allocation", v4.
This series is split out from the earlier larger series "mm: Generalize
HVO for HugeTLB and device DAX" [1]. It collects the first 19 patches of
that series as a standalone set of fixes and preparatory cleanups around
bootmem HugeTLB handling, sparse initialization ordering, and related
vmemmap setup.
The first patches fix a few bugs found while reviewing the existing code,
including incorrect bootmem HVO handling, wrong vmemmap registration
arguments, a powerpc compound-vmemmap tracking bug, and too-late
initialization of gigantic bootmem HugeTLB struct pages.
The rest of the series reorders early memory initialization so the
relevant zone state is available before sparse and HugeTLB boot-time setup
runs, then simplifies the remaining bootmem gigantic hugepage allocation
path and removes code made obsolete by that rework.
At a high level:
- patches [1-4] fix boot-time and arch-specific bugs
- patches [5-12] reorder and simplify sparse/mm/hugetlb early init
- patches [13-19] refactor bootmem gigantic hugepage allocation and
remove obsolete helpers and state
This patch (of 19):
Commit 622026e87c40 ("mm/hugetlb: remove fake head pages") switched
HVO to reuse per-zone shared tail pages from zone->vmemmap_tails[].
Those shared tail pages were initialized in hugetlb_vmemmap_init(), but
bootmem HugeTLB folios are prepared earlier from
gather_bootmem_prealloc(). With hugetlb_free_vmemmap=on,
prep_and_add_bootmem_folios() can access pageblock flags on bootmem
HugeTLB pages whose mirrored tail struct pages already point to the shared
tail page. On CONFIG_DEBUG_VM kernels, get_pfnblock_bitmap_bitidx() then
dereferences the still-uninitialized shared tail page and can panic during
boot.
Initialize zone->vmemmap_tails[] from gather_bootmem_prealloc(), before
bootmem HugeTLB folios are processed, and drop the later initialization
from hugetlb_vmemmap_init().
This bug only affects CONFIG_DEBUG_VM kernels, where the relevant
assertion is evaluated.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix boot panic with CONFIG_DEBUG_VM and HVO bootmem pages
Patch series "mm: Refactor bootmem gigantic hugepage allocation", v4.
This series is split out from the earlier larger series "mm: Generalize
HVO for HugeTLB and device DAX" [1]. It collects the first 19 patches of
that series as a standalone set of fixes and preparatory cleanups around
bootmem HugeTLB handling, sparse initialization ordering, and related
vmemmap setup.
The first patches fix a few bugs found while reviewing the existing code,
including incorrect bootmem HVO handling, wrong vmemmap registration
arguments, a powerpc compound-vmemmap tracking bug, and too-late
initialization of gigantic bootmem HugeTLB struct pages.
The rest of the series reorders early memory initialization so the
relevant zone state is available before sparse and HugeTLB boot-time setup
runs, then simplifies the remaining bootmem gigantic hugepage allocation
path and removes code made obsolete by that rework.
At a high level:
- patches [1-4] fix boot-time and arch-specific bugs
- patches [5-12] reorder and simplify sparse/mm/hugetlb early init
- patches [13-19] refactor bootmem gigantic hugepage allocation and
remove obsolete helpers and state
This patch (of 19):
Commit 622026e87c40 ("mm/hugetlb: remove fake head pages") switched
HVO to reuse per-zone shared tail pages from zone->vmemmap_tails[].
Those shared tail pages were initialized in hugetlb_vmemmap_init(), but
bootmem HugeTLB folios are prepared earlier from
gather_bootmem_prealloc(). With hugetlb_free_vmemmap=on,
prep_and_add_bootmem_folios() can access pageblock flags on bootmem
HugeTLB pages whose mirrored tail struct pages already point to the shared
tail page. On CONFIG_DEBUG_VM kernels, get_pfnblock_bitmap_bitidx() then
dereferences the still-uninitialized shared tail page and can panic during
boot.
Initialize zone->vmemmap_tails[] from gather_bootmem_prealloc(), before
bootmem HugeTLB folios are processed, and drop the later initialization
from hugetlb_vmemmap_init().
This bug only affects CONFIG_DEBUG_VM kernels, where the relevant
assertion is evaluated.
🎖@cveNotify
🚨 CVE-2026-93233
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: fix callocated underflow on large folio split
nouveau_dmem_folio_free() drops chunk->callocated once per freed folio,
while a large (compound) device-private folio is only counted once when
it is allocated. When such a folio is split, the mm core invokes
->folio_split() (nouveau_dmem_folio_split()) once for each new
sub-folio, but the hook only fixes up the sub-folio metadata and leaves
chunk->callocated unchanged.
Each resulting sub-folio is later freed separately, so after a split
the single allocation (+1) is met by N frees (-N), leaving
chunk->callocated short by N-1. On the first split/free cycle it
underflows: WARN_ON(!chunk->callocated) fires, the unsigned counter
wraps and never returns to zero, so the chunk can no longer be
reclaimed (nouveau_dmem_fini() also warns on the leaked count).
Account for the new sub-folio in the split hook, under the same lock as
nouveau_dmem_folio_free(), so the count stays balanced.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: fix callocated underflow on large folio split
nouveau_dmem_folio_free() drops chunk->callocated once per freed folio,
while a large (compound) device-private folio is only counted once when
it is allocated. When such a folio is split, the mm core invokes
->folio_split() (nouveau_dmem_folio_split()) once for each new
sub-folio, but the hook only fixes up the sub-folio metadata and leaves
chunk->callocated unchanged.
Each resulting sub-folio is later freed separately, so after a split
the single allocation (+1) is met by N frees (-N), leaving
chunk->callocated short by N-1. On the first split/free cycle it
underflows: WARN_ON(!chunk->callocated) fires, the unsigned counter
wraps and never returns to zero, so the chunk can no longer be
reclaimed (nouveau_dmem_fini() also warns on the leaked count).
Account for the new sub-folio in the split hook, under the same lock as
nouveau_dmem_folio_free(), so the count stays balanced.
🎖@cveNotify
🚨 CVE-2026-93234
In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate TV mode names before creating enum property
The GUD protocol returns TV mode names as fixed-size
GUD_CONNECTOR_TV_MODE_NAME_LEN entries and requires each name to be
NUL-terminated.
gud_connector_add_tv_mode() currently passes each fixed-size entry
directly to drm_mode_create_tv_properties_legacy(), which eventually
reaches drm_property_add_enum() and strlen(). If a device returns an
entry without a terminating NUL byte, strlen() reads past the end of
the slot and can run beyond the allocated buffer, triggering an
out-of-bounds read.
Validate that each returned TV mode name contains a NUL terminator
within its fixed-size slot before passing it to the DRM property code.
If a malformed entry is found, reject the device response with -EIO.
This fixes the out-of-bounds read without changing the handling of
valid devices, and avoids silently truncating malformed protocol data.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate TV mode names before creating enum property
The GUD protocol returns TV mode names as fixed-size
GUD_CONNECTOR_TV_MODE_NAME_LEN entries and requires each name to be
NUL-terminated.
gud_connector_add_tv_mode() currently passes each fixed-size entry
directly to drm_mode_create_tv_properties_legacy(), which eventually
reaches drm_property_add_enum() and strlen(). If a device returns an
entry without a terminating NUL byte, strlen() reads past the end of
the slot and can run beyond the allocated buffer, triggering an
out-of-bounds read.
Validate that each returned TV mode name contains a NUL terminator
within its fixed-size slot before passing it to the DRM property code.
If a malformed entry is found, reject the device response with -EIO.
This fixes the out-of-bounds read without changing the handling of
valid devices, and avoids silently truncating malformed protocol data.
🎖@cveNotify
🚨 CVE-2026-93235
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to zero post-EOF data when extending file size
generic/794 4s ... - output mismatch (see /share/git/fstests/results//generic/794.out.bad)
--- tests/generic/794.out 2026-06-12 08:46:32.766426241 +0800
+++ /share/git/fstests/results//generic/794.out.bad 2026-07-05 18:32:55.000000000 +0800
@@ -1,4 +1,16 @@
QA output created by 794
append_write
+FAIL: non-zero data in gap [4080,4096) after shutdown+remount
+000000 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a >ZZZZZZZZZZZZZZZZ<
+*
+001000
truncate_up
...
(Run 'diff -u /share/git/fstests/tests/generic/794.out /share/git/fstests/results//generic/794.out.bad' to see the entire diff)
Ran: generic/794
Failures: generic/794
Failed 1 of 1 tests
Steps of generic/794:
1. write 4096 bytes to file w/ 0x5a
2. use fiemap to get PBA of first block in file
3. truncate file to 4080
4. umount; write 4096 bytes to file w/ 0x5a directly via PBA; mount
5. extend filesize via
a) append 4096 from offset 4096, or
b) truncate 8192, or
c) fallocate 4096 from offset 4096
6. verify the gap is zeroed in memory [4080,4096)
7. sync range 4096 from offset 4096; shutdown -f (flush meta before shutdown)
8. umount; mount; verify [4080,4096) is zeroed or not.
When extending file size (e.g. via truncate, fallocate, or write) across an
unaligned EOF boundary, we need to ensure that post-EOF data in the partial
page is zeroed out in pagecache and marked dirty, then writeback the cache to
persist zeroed data before committing inode w/ updated i_size.
This help to prevent stale disk data beyond the previous EOF from being exposed
after remounting or crash recovery.
Since f2fs is a LFS filesystem, we only support direct write via PBA in pinfile,
and pinfile has section-aligned filesize, so in Android, there should no problem,
but for other usage in different environment, let's fix this w/ fsync_mode=strict
mount option.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to zero post-EOF data when extending file size
generic/794 4s ... - output mismatch (see /share/git/fstests/results//generic/794.out.bad)
--- tests/generic/794.out 2026-06-12 08:46:32.766426241 +0800
+++ /share/git/fstests/results//generic/794.out.bad 2026-07-05 18:32:55.000000000 +0800
@@ -1,4 +1,16 @@
QA output created by 794
append_write
+FAIL: non-zero data in gap [4080,4096) after shutdown+remount
+000000 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a >ZZZZZZZZZZZZZZZZ<
+*
+001000
truncate_up
...
(Run 'diff -u /share/git/fstests/tests/generic/794.out /share/git/fstests/results//generic/794.out.bad' to see the entire diff)
Ran: generic/794
Failures: generic/794
Failed 1 of 1 tests
Steps of generic/794:
1. write 4096 bytes to file w/ 0x5a
2. use fiemap to get PBA of first block in file
3. truncate file to 4080
4. umount; write 4096 bytes to file w/ 0x5a directly via PBA; mount
5. extend filesize via
a) append 4096 from offset 4096, or
b) truncate 8192, or
c) fallocate 4096 from offset 4096
6. verify the gap is zeroed in memory [4080,4096)
7. sync range 4096 from offset 4096; shutdown -f (flush meta before shutdown)
8. umount; mount; verify [4080,4096) is zeroed or not.
When extending file size (e.g. via truncate, fallocate, or write) across an
unaligned EOF boundary, we need to ensure that post-EOF data in the partial
page is zeroed out in pagecache and marked dirty, then writeback the cache to
persist zeroed data before committing inode w/ updated i_size.
This help to prevent stale disk data beyond the previous EOF from being exposed
after remounting or crash recovery.
Since f2fs is a LFS filesystem, we only support direct write via PBA in pinfile,
and pinfile has section-aligned filesize, so in Android, there should no problem,
but for other usage in different environment, let's fix this w/ fsync_mode=strict
mount option.
🎖@cveNotify
🚨 CVE-2026-93236
In the Linux kernel, the following vulnerability has been resolved:
media: meson: vdec: fix NULL pointer deref in vdec_try_fmt_common
When VIDIOC_TRY_FMT is called with an unsupported pixel format on the
OUTPUT queue, vdec_try_fmt_common() falls back to V4L2_PIX_FMT_MPEG2.
However, if a distro has locally patched MPEG2 support out (as it has
been broken for some time) the platform format table does not contain
MPEG2 so find_format() returns NULL and the subsequent dereference of
fmt_out->max_width triggers a NULL pointer dereference.
Fix this by falling back to the first format in the platform's format
array instead of hardcoding V4L2_PIX_FMT_MPEG2. This is always valid
since every platform defines at least one format.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
media: meson: vdec: fix NULL pointer deref in vdec_try_fmt_common
When VIDIOC_TRY_FMT is called with an unsupported pixel format on the
OUTPUT queue, vdec_try_fmt_common() falls back to V4L2_PIX_FMT_MPEG2.
However, if a distro has locally patched MPEG2 support out (as it has
been broken for some time) the platform format table does not contain
MPEG2 so find_format() returns NULL and the subsequent dereference of
fmt_out->max_width triggers a NULL pointer dereference.
Fix this by falling back to the first format in the platform's format
array instead of hardcoding V4L2_PIX_FMT_MPEG2. This is always valid
since every platform defines at least one format.
🎖@cveNotify
🚨 CVE-2026-93237
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add DIRECT_MAP_PHYSMEM_END definition
get_free_mem_region() and mhp_get_pluggable_range() bound their search
to DIRECT_MAP_PHYSMEM_END. LoongArch does not define it, so the fallback
in include/linux/mm.h applies: under CONFIG_SPARSEMEM_VMEMMAP it is
(1ULL << MAX_PHYSMEM_BITS) - 1, a compile-time constant that does not
adapt to the CPU's physical address space bits (cpu_pabits, probed from
CPUCFG1).
The vmemmap window only covers physical space below 2^(cpu_pabits+1)
(i.e. VMEMMAP_SIZE), so on CPUs with fewer physical address bits than
MAX_PHYSMEM_BITS the fallback allows get_free_mem_region() to return
a ZONE_DEVICE region outside the vmemmap window; vmemmap_populate() then
wraps the memmap range around and maps it into low memory, silently
corrupting the page tables. The same search also picked the top-of-
address-space region that crashed memmap_init_zone_device() with amdkfd
on Loongson-3C6000 in 6.16 [1]; the commit 2969b42c8f99 ("LoongArch/mm:
align vmemmap to maximal folio size") keeps that region in bounds on
current Loongson-3C6000 configs, but CPUs with smaller cpu_pabits (e.g.
the Loongson-2K series) are still affected.
Define DIRECT_MAP_PHYSMEM_END as the vmemmap-covered physical range,
(1ULL << (cpu_pabits + 1)) - 1, capped at (1ULL << MAX_PHYSMEM_BITS) - 1
under CONFIG_SPARSEMEM, similar to the commit f3336b48cf9d ("riscv: mm:
Define DIRECT_MAP_PHYSMEM_END").
[1] https://lore.kernel.org/amd-gfx/20250814032153.227285-1-jeffbai@aosc.io/
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add DIRECT_MAP_PHYSMEM_END definition
get_free_mem_region() and mhp_get_pluggable_range() bound their search
to DIRECT_MAP_PHYSMEM_END. LoongArch does not define it, so the fallback
in include/linux/mm.h applies: under CONFIG_SPARSEMEM_VMEMMAP it is
(1ULL << MAX_PHYSMEM_BITS) - 1, a compile-time constant that does not
adapt to the CPU's physical address space bits (cpu_pabits, probed from
CPUCFG1).
The vmemmap window only covers physical space below 2^(cpu_pabits+1)
(i.e. VMEMMAP_SIZE), so on CPUs with fewer physical address bits than
MAX_PHYSMEM_BITS the fallback allows get_free_mem_region() to return
a ZONE_DEVICE region outside the vmemmap window; vmemmap_populate() then
wraps the memmap range around and maps it into low memory, silently
corrupting the page tables. The same search also picked the top-of-
address-space region that crashed memmap_init_zone_device() with amdkfd
on Loongson-3C6000 in 6.16 [1]; the commit 2969b42c8f99 ("LoongArch/mm:
align vmemmap to maximal folio size") keeps that region in bounds on
current Loongson-3C6000 configs, but CPUs with smaller cpu_pabits (e.g.
the Loongson-2K series) are still affected.
Define DIRECT_MAP_PHYSMEM_END as the vmemmap-covered physical range,
(1ULL << (cpu_pabits + 1)) - 1, capped at (1ULL << MAX_PHYSMEM_BITS) - 1
under CONFIG_SPARSEMEM, similar to the commit f3336b48cf9d ("riscv: mm:
Define DIRECT_MAP_PHYSMEM_END").
[1] https://lore.kernel.org/amd-gfx/20250814032153.227285-1-jeffbai@aosc.io/
🎖@cveNotify
🚨 CVE-2026-93238
In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix potential use of uninitialized apm_filtered bitmap
The DECLARE_BITMAP(apm_filtered, AP_DEVICES) macro allocates the bitmap
on the stack without zero-initializing it.
In vfio_ap_mdev_hot_plug_cfg(), the vfio_ap_mdev_filter_matrix() function
is only called to initialize and populate apm_filtered if either
filter_adapters or filter_domains is true. If the hot plug configuration
change only adds control domains (meaning filter_cdoms is true, but
filter_adapters and filter_domains are both false),
vfio_ap_mdev_filter_matrix() is bypassed.
Consequently, apm_filtered is passed to reset_queues_for_apids() with
uninitialized stack garbage. This can cause reset_queues_for_apids() to
interpret arbitrary stack garbage bits as valid APIDs to reset, potentially
performing unintended guest hardware queue resets.
Fix this by zero-initializing the apm_filtered bitmap at the beginning of
vfio_ap_mdev_hot_plug_cfg() using bitmap_zero().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix potential use of uninitialized apm_filtered bitmap
The DECLARE_BITMAP(apm_filtered, AP_DEVICES) macro allocates the bitmap
on the stack without zero-initializing it.
In vfio_ap_mdev_hot_plug_cfg(), the vfio_ap_mdev_filter_matrix() function
is only called to initialize and populate apm_filtered if either
filter_adapters or filter_domains is true. If the hot plug configuration
change only adds control domains (meaning filter_cdoms is true, but
filter_adapters and filter_domains are both false),
vfio_ap_mdev_filter_matrix() is bypassed.
Consequently, apm_filtered is passed to reset_queues_for_apids() with
uninitialized stack garbage. This can cause reset_queues_for_apids() to
interpret arbitrary stack garbage bits as valid APIDs to reset, potentially
performing unintended guest hardware queue resets.
Fix this by zero-initializing the apm_filtered bitmap at the beginning of
vfio_ap_mdev_hot_plug_cfg() using bitmap_zero().
🎖@cveNotify
🚨 CVE-2026-93239
In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: Fix the lockless page-table walk in show_pte()
show_pte() walks page tables locklessly and can run with interrupts
enabled. A concurrent teardown can free a table page while it is being
walked. It can also clear a parent entry after show_pte() checked it; the
regular pXd_offset() helpers then reread the cleared entry and can derive a
bogus lower-level pointer and fault again.
Use the lockless offset helpers with the saved parent entries, as
gup_fast() does, and pass the saved PMD to pte_offset_map().
For task page tables, arm64 selects MMU_GATHER_RCU_TABLE_FREE. Disable
local interrupts around the walk to hold off RCU-deferred table frees and
block the tlb_remove_table_sync_one() IPI until the walk is finished.
Place the IRQ guard after the header print. This does not make the output a
consistent snapshot, but prevents the task page-table walk from
dereferencing a released table page or deriving a pointer from a different
parent value.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: Fix the lockless page-table walk in show_pte()
show_pte() walks page tables locklessly and can run with interrupts
enabled. A concurrent teardown can free a table page while it is being
walked. It can also clear a parent entry after show_pte() checked it; the
regular pXd_offset() helpers then reread the cleared entry and can derive a
bogus lower-level pointer and fault again.
Use the lockless offset helpers with the saved parent entries, as
gup_fast() does, and pass the saved PMD to pte_offset_map().
For task page tables, arm64 selects MMU_GATHER_RCU_TABLE_FREE. Disable
local interrupts around the walk to hold off RCU-deferred table frees and
block the tlb_remove_table_sync_one() IPI until the walk is finished.
Place the IRQ guard after the header print. This does not make the output a
consistent snapshot, but prevents the task page-table walk from
dereferencing a released table page or deriving a pointer from a different
parent value.
🎖@cveNotify
🚨 CVE-2026-93240
In the Linux kernel, the following vulnerability has been resolved:
memcg: make the v1 soft limit knob inert
The v1 soft limit has been deprecated since v6.12 and nobody has reported
depending on it. Start the removal by decoupling the interface from the
implementation: keep memory.soft_limit_in_bytes, but ignore writes to it
and always report the maximum value on read similar to what
memory.kmem.limit_in_bytes already does.
Writes are still parsed, so malformed input keeps returning -EINVAL. The
knob now also behaves the same everywhere: it used to return -EOPNOTSUPP
on PREEMPT_RT, where soft limit reclaim has always been disabled.
This also fixes the syzbot report linked below. Soft limit reclaim is the
only caller that runs shrink_lruvec() from kswapd against a specific
memcg, so it is the only way to reach lru_gen_shrink_lruvec() and in turn
set_mm_walk(), which warns when called from kswapd.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
memcg: make the v1 soft limit knob inert
The v1 soft limit has been deprecated since v6.12 and nobody has reported
depending on it. Start the removal by decoupling the interface from the
implementation: keep memory.soft_limit_in_bytes, but ignore writes to it
and always report the maximum value on read similar to what
memory.kmem.limit_in_bytes already does.
Writes are still parsed, so malformed input keeps returning -EINVAL. The
knob now also behaves the same everywhere: it used to return -EOPNOTSUPP
on PREEMPT_RT, where soft limit reclaim has always been disabled.
This also fixes the syzbot report linked below. Soft limit reclaim is the
only caller that runs shrink_lruvec() from kswapd against a specific
memcg, so it is the only way to reach lru_gen_shrink_lruvec() and in turn
set_mm_walk(), which warns when called from kswapd.
🎖@cveNotify
🚨 CVE-2026-93242
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb()
qla24xx_process_response_queue() advances ring_ptr past the head IOCB
before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr
already points at the first continuation IOCB. The function however
looped purex->entry_count times starting at ring_ptr. As entry_count
includes the head, this consumed one entry too many: it stamped
RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring
past it, silently dropping a legitimate firmware response. The head
IOCB's signature was also never marked.
Mark the head processed and account for it, then consume only the
entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb()
qla24xx_process_response_queue() advances ring_ptr past the head IOCB
before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr
already points at the first continuation IOCB. The function however
looped purex->entry_count times starting at ring_ptr. As entry_count
includes the head, this consumed one entry too many: it stamped
RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring
past it, silently dropping a legitimate firmware response. The head
IOCB's signature was also never marked.
Mark the head processed and account for it, then consume only the
entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer().
🎖@cveNotify
🚨 CVE-2026-93243
In the Linux kernel, the following vulnerability has been resolved:
mm/secretmem: properly account locked pages
secretmem accounts folios by treating memory as if it were mlock()'d and
thus limited by the RLIMIT_MEMLOCK limit.
However the folios are unevictable and remain so until the inode is
evicted, eliminating usual mlock() semantics - mapping folios then
unmapping them does not clear their unevictable state, since it depends on
AS_UNEVICTABLE, not PG_mlocked.
A user can therefore easily work around the RLIMIT_MEMLOCK limit - simply
map then unmap and VmLck no longer counts the secretmem range. Worse,
folios are not accounted in the process's RSS, meaning the OOM killer
won't know to kill the process.
Repeatedly mapping/unmapping (or forking) can then result in the
consumption of all available system memory with unevictable folios and
cause system instability.
A secretmem fd can be passed between processes and over fork so a
per-process limit simply does not make sense, so follow the precedent set
by io_uring, perf, skbuff, iommufd and xdp by tracking the number of
locked pages in user_struct->locked_vm.
Since the scope tracked is actually inode lifetime, the RLIMIT_MEMLOCK
applies per-user not per-process, so it doesn't make sense to bypass for
users with CAP_IPC_LOCK, therefore remove this bypass.
There is simply no reason to carry on marking the mapping as mlock()'d
since it's misleading and the lifecycle is now correctly handled, so
remove this too.
Note that secretmem does not support any form of truncation (including
hole punching) and the folios are unreclaimable, so the folios need only
be accounted on fault and unaccounted on inode destruction.
__secretmem_account_pages() is more or less a duplicate of the code that
io_uring etc. use, but since this is a bug fix that needs backporting,
defer any de-duplication efforts to a follow-up.
test_mlock_limit() asserts mlock_future_ok() on mmap(), however this has
been removed, so remove the test altogether for the fix. A new test will
be sent separately for upstream.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mm/secretmem: properly account locked pages
secretmem accounts folios by treating memory as if it were mlock()'d and
thus limited by the RLIMIT_MEMLOCK limit.
However the folios are unevictable and remain so until the inode is
evicted, eliminating usual mlock() semantics - mapping folios then
unmapping them does not clear their unevictable state, since it depends on
AS_UNEVICTABLE, not PG_mlocked.
A user can therefore easily work around the RLIMIT_MEMLOCK limit - simply
map then unmap and VmLck no longer counts the secretmem range. Worse,
folios are not accounted in the process's RSS, meaning the OOM killer
won't know to kill the process.
Repeatedly mapping/unmapping (or forking) can then result in the
consumption of all available system memory with unevictable folios and
cause system instability.
A secretmem fd can be passed between processes and over fork so a
per-process limit simply does not make sense, so follow the precedent set
by io_uring, perf, skbuff, iommufd and xdp by tracking the number of
locked pages in user_struct->locked_vm.
Since the scope tracked is actually inode lifetime, the RLIMIT_MEMLOCK
applies per-user not per-process, so it doesn't make sense to bypass for
users with CAP_IPC_LOCK, therefore remove this bypass.
There is simply no reason to carry on marking the mapping as mlock()'d
since it's misleading and the lifecycle is now correctly handled, so
remove this too.
Note that secretmem does not support any form of truncation (including
hole punching) and the folios are unreclaimable, so the folios need only
be accounted on fault and unaccounted on inode destruction.
__secretmem_account_pages() is more or less a duplicate of the code that
io_uring etc. use, but since this is a bug fix that needs backporting,
defer any de-duplication efforts to a follow-up.
test_mlock_limit() asserts mlock_future_ok() on mmap(), however this has
been removed, so remove the test altogether for the fix. A new test will
be sent separately for upstream.
🎖@cveNotify
🚨 CVE-2026-93244
In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: simpledrm: Improve stride validation
Validate the computed stride against the maximum value INT_MAX.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: simpledrm: Improve stride validation
Validate the computed stride against the maximum value INT_MAX.
🎖@cveNotify
🚨 CVE-2026-93245
In the Linux kernel, the following vulnerability has been resolved:
apparmor: policy_int make sure list heads are initialized before fail path
If profile create fails before policy_init is complete the list heads
are not properly initialized causing profile_free() sanity checks to
trigger the following splat.
AppArmor WARN aa_policy_destroy: (((!list_empty(&policy->profiles) && (&policy->profiles)->prev != ((void *) 0x122 + (0xdead000000000000UL))))):
WARNING: security/apparmor/lib.c:509 at aa_policy_destroy+0x164/0x1b0 security/apparmor/lib.c:509, CPU#0: syz.0.17/5541
Modules linked in:
CPU: 0 UID: 0 PID: 5541 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:aa_policy_destroy+0x16b/0x1b0 security/apparmor/lib.c:509
Code: 85 ed 7e 4d e8 96 bc 37 fd 5b 41 5c 41 5e 41 5f 5d e9 19 27 4e 07 cc e8 83 bc 37 fd 48 8d 3d 0c f0 d3 0b 48 c7 c6 a4 eb 38 8e <67> 48 0f b9 3a e9 04 ff ff ff e8 66 bc 37 fd 48 8d 3d ff ef d3 0b
RSP: 0018:ffffc9000345eaa0 EFLAGS: 00010293
RAX: ffffffff848f530d RBX: ffff88803f734800 RCX: ffff88801af2a580
RDX: 0000000000000000 RSI: ffffffff8e38eba4 RDI: ffffffff90634320
RBP: 0000000000000000 R08: 0000000000000cc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d95913 R12: dead000000000122
R13: ffff88803f734800 R14: ffff88803f734828 R15: dffffc0000000000
FS: 00007f5f6a1836c0(0000) GS:ffff88808c519000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d02407b048 CR3: 0000000012aa9000 CR4: 0000000000352ef0
Call Trace:
<TASK>
aa_free_profile+0x9d/0x9f0 security/apparmor/policy.c:334
aa_alloc_profile+0x1e4/0x3e0 security/apparmor/policy.c:416
unpack_profile security/apparmor/policy_unpack.c:1153 [inline]
aa_unpack+0x17db/0x7430 security/apparmor/policy_unpack.c:1748
aa_replace_profiles+0x226/0x2a20 security/apparmor/policy.c:1183
policy_update+0x234/0x4a0 security/apparmor/apparmorfs.c:505
profile_load+0x1cb/0x320 security/apparmor/apparmorfs.c:522
vfs_write+0x296/0xba0 fs/read_write.c:685
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f6939e0d9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5f6a183028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f5f69625fa0 RCX: 00007f5f6939e0d9
RDX: 0000000000000041 RSI: 0000200000000400 RDI: 0000000000000003
RBP: 00007f5f6a183090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007f5f69626038 R14: 00007f5f69625fa0 R15: 00007ffe23725c18
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
apparmor: policy_int make sure list heads are initialized before fail path
If profile create fails before policy_init is complete the list heads
are not properly initialized causing profile_free() sanity checks to
trigger the following splat.
AppArmor WARN aa_policy_destroy: (((!list_empty(&policy->profiles) && (&policy->profiles)->prev != ((void *) 0x122 + (0xdead000000000000UL))))):
WARNING: security/apparmor/lib.c:509 at aa_policy_destroy+0x164/0x1b0 security/apparmor/lib.c:509, CPU#0: syz.0.17/5541
Modules linked in:
CPU: 0 UID: 0 PID: 5541 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:aa_policy_destroy+0x16b/0x1b0 security/apparmor/lib.c:509
Code: 85 ed 7e 4d e8 96 bc 37 fd 5b 41 5c 41 5e 41 5f 5d e9 19 27 4e 07 cc e8 83 bc 37 fd 48 8d 3d 0c f0 d3 0b 48 c7 c6 a4 eb 38 8e <67> 48 0f b9 3a e9 04 ff ff ff e8 66 bc 37 fd 48 8d 3d ff ef d3 0b
RSP: 0018:ffffc9000345eaa0 EFLAGS: 00010293
RAX: ffffffff848f530d RBX: ffff88803f734800 RCX: ffff88801af2a580
RDX: 0000000000000000 RSI: ffffffff8e38eba4 RDI: ffffffff90634320
RBP: 0000000000000000 R08: 0000000000000cc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d95913 R12: dead000000000122
R13: ffff88803f734800 R14: ffff88803f734828 R15: dffffc0000000000
FS: 00007f5f6a1836c0(0000) GS:ffff88808c519000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d02407b048 CR3: 0000000012aa9000 CR4: 0000000000352ef0
Call Trace:
<TASK>
aa_free_profile+0x9d/0x9f0 security/apparmor/policy.c:334
aa_alloc_profile+0x1e4/0x3e0 security/apparmor/policy.c:416
unpack_profile security/apparmor/policy_unpack.c:1153 [inline]
aa_unpack+0x17db/0x7430 security/apparmor/policy_unpack.c:1748
aa_replace_profiles+0x226/0x2a20 security/apparmor/policy.c:1183
policy_update+0x234/0x4a0 security/apparmor/apparmorfs.c:505
profile_load+0x1cb/0x320 security/apparmor/apparmorfs.c:522
vfs_write+0x296/0xba0 fs/read_write.c:685
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f6939e0d9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5f6a183028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f5f69625fa0 RCX: 00007f5f6939e0d9
RDX: 0000000000000041 RSI: 0000200000000400 RDI: 0000000000000003
RBP: 00007f5f6a183090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007f5f69626038 R14: 00007f5f69625fa0 R15: 00007ffe23725c18
🎖@cveNotify
🚨 CVE-2026-93246
In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix out-of-bounds read setting MSI-X irq affinity
rvu_register_interrupts() walks every MSI-X vector and uses strstr()
to match "Mbox" or "FLR" in irq_name before pinning those interrupts
to CPU 0. irq_name is a per-vector NAME_SIZE buffer, but not every
slot is populated before this loop runs. strstr() keeps scanning until
it finds a NUL terminator, so an uninitialized slot can trigger a KASAN
slab-out-of-bounds read at boot when debug options are enabled.
Use strnstr() with NAME_SIZE to bound the search within each vector's
name buffer.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix out-of-bounds read setting MSI-X irq affinity
rvu_register_interrupts() walks every MSI-X vector and uses strstr()
to match "Mbox" or "FLR" in irq_name before pinning those interrupts
to CPU 0. irq_name is a per-vector NAME_SIZE buffer, but not every
slot is populated before this loop runs. strstr() keeps scanning until
it finds a NUL terminator, so an uninitialized slot can trigger a KASAN
slab-out-of-bounds read at boot when debug options are enabled.
Use strnstr() with NAME_SIZE to bound the search within each vector's
name buffer.
🎖@cveNotify
🚨 CVE-2026-93247
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix 'hdev->discovery.uuids' NULL dereference
'uuid_count' member of struct 'discovery_state' is assigned and read
without any locks, so there is a chance of situation when
uuid_count != 0, but uuids is NULL and there will be NULL pointer
dereference.
Possible race:
'hci_update_passive_scan_sync'
'hci_discovery_filter_clear'
hdev->discovery.uuid_count = 0;
<----------------------preempted----------------------------->
'start_service_discovery'
// Set uuid_count to value != 0
hdev->discovery.uuid_count = uuid_count;
hdev->discovery.uuids = kmemdup(...);
<----------------------preempted----------------------------->
spin_lock(&hdev->discovery.lock);
kfree(hdev->discovery.uuids);
hdev->discovery.uuids = NULL;
spin_unlock(&hdev->discovery.lock);
Now uuids == NULL and uuid_count != 0.
So 'mgmt_device_found' -> 'is_filter_match' -> 'eir_has_uuids' receives
non consistent discovery state, where NULL dereference of uuids happens.
To fix it let's add discovery.lock around every read/write of uuid_count,
uuids pair of struct members. It is also important to assign uuid_count
value only after success kmemdup() allocation in
start_service_discovery(), otherwise uuids is NULL, because kmemdup failed,
but uuid_count is already assigned to non zero value.
The following panic happens:
[ ] ------------[ cut here ]------------
[ ] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[ ] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
[ ] CPU: 0 PID: 15056 Comm: kworker/u9:2
[ ] Workqueue: hci0 hci_rx_work
[ ] pstate: 10400009 (nzcV daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ ] pc : eir_has_uuids+0x2d8/0x590
[ ] lr : is_filter_match+0x258/0x320
...
[ ] Call trace:
[ ] eir_has_uuids+0x2d8/0x590
[ ] is_filter_match+0x258/0x320
[ ] mgmt_device_found+0x5b0/0xafc
[ ] process_adv_report.part.0+0x8c8/0xf14
[ ] hci_le_adv_report_evt+0x338/0x3f0
[ ] hci_le_meta_evt+0x1f0/0x4c8
[ ] hci_event_packet+0x440/0xc9c
[ ] hci_rx_work+0x44c/0xaf8
[ ] process_one_work+0x54c/0x103c
[ ] worker_thread+0x6c4/0x10c4
[ ] kthread+0x274/0x2ec
[ ] ret_from_fork+0x10/0x20
[ ] Code: 14000004 91004021 eb14003f 54000180 (f9400024)
[ ] ---[ end trace 0000000000000000 ]---
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix 'hdev->discovery.uuids' NULL dereference
'uuid_count' member of struct 'discovery_state' is assigned and read
without any locks, so there is a chance of situation when
uuid_count != 0, but uuids is NULL and there will be NULL pointer
dereference.
Possible race:
'hci_update_passive_scan_sync'
'hci_discovery_filter_clear'
hdev->discovery.uuid_count = 0;
<----------------------preempted----------------------------->
'start_service_discovery'
// Set uuid_count to value != 0
hdev->discovery.uuid_count = uuid_count;
hdev->discovery.uuids = kmemdup(...);
<----------------------preempted----------------------------->
spin_lock(&hdev->discovery.lock);
kfree(hdev->discovery.uuids);
hdev->discovery.uuids = NULL;
spin_unlock(&hdev->discovery.lock);
Now uuids == NULL and uuid_count != 0.
So 'mgmt_device_found' -> 'is_filter_match' -> 'eir_has_uuids' receives
non consistent discovery state, where NULL dereference of uuids happens.
To fix it let's add discovery.lock around every read/write of uuid_count,
uuids pair of struct members. It is also important to assign uuid_count
value only after success kmemdup() allocation in
start_service_discovery(), otherwise uuids is NULL, because kmemdup failed,
but uuid_count is already assigned to non zero value.
The following panic happens:
[ ] ------------[ cut here ]------------
[ ] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[ ] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
[ ] CPU: 0 PID: 15056 Comm: kworker/u9:2
[ ] Workqueue: hci0 hci_rx_work
[ ] pstate: 10400009 (nzcV daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ ] pc : eir_has_uuids+0x2d8/0x590
[ ] lr : is_filter_match+0x258/0x320
...
[ ] Call trace:
[ ] eir_has_uuids+0x2d8/0x590
[ ] is_filter_match+0x258/0x320
[ ] mgmt_device_found+0x5b0/0xafc
[ ] process_adv_report.part.0+0x8c8/0xf14
[ ] hci_le_adv_report_evt+0x338/0x3f0
[ ] hci_le_meta_evt+0x1f0/0x4c8
[ ] hci_event_packet+0x440/0xc9c
[ ] hci_rx_work+0x44c/0xaf8
[ ] process_one_work+0x54c/0x103c
[ ] worker_thread+0x6c4/0x10c4
[ ] kthread+0x274/0x2ec
[ ] ret_from_fork+0x10/0x20
[ ] Code: 14000004 91004021 eb14003f 54000180 (f9400024)
[ ] ---[ end trace 0000000000000000 ]---
🎖@cveNotify
🚨 CVE-2026-93248
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: don't WARN on kernel job timeout when device already wedged
igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2
(UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind,
a GSC proxy kernel submission can still time out; with the device wedged
and the GuC CT stopped it can never complete, so its kernel job times out.
Tile0: GT1: Kernel-submitted job timed out
WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:...
at guc_exec_queue_timedout_job()
Workqueue: gt-ordered-wq drm_sched_job_timedout
Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even
though the device is already wedged. The timeout handler then treats the
kernel queue timeout as unexpected and taints the kernel.
Honour an already-wedged device even for killed queues so the expected
teardown timeout no longer trips the WARN.
(cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: don't WARN on kernel job timeout when device already wedged
igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2
(UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind,
a GSC proxy kernel submission can still time out; with the device wedged
and the GuC CT stopped it can never complete, so its kernel job times out.
Tile0: GT1: Kernel-submitted job timed out
WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:...
at guc_exec_queue_timedout_job()
Workqueue: gt-ordered-wq drm_sched_job_timedout
Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even
though the device is already wedged. The timeout handler then treats the
kernel queue timeout as unexpected and taints the kernel.
Honour an already-wedged device even for killed queues so the expected
teardown timeout no longer trips the WARN.
(cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19)
🎖@cveNotify
🚨 CVE-2026-93249
In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic-spisg: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
aml_spisg_clk_init() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic-spisg: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
aml_spisg_clk_init() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents.
🎖@cveNotify
🚨 CVE-2026-93250
In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_flush()
vxlan_mdb_flush() iterates over the MDB entries using
hlist_for_each_entry_safe(), which only tolerates the removal of the
current entry. Contrary to the comment above the loop, the removal of an
entry can trigger the removal of another entry.
Flushing the remotes of a (*, G) entry also removes the (S, G) entries
that were created for its source list, once they are left without
remotes:
vxlan_mdb_remotes_flush()
-> vxlan_mdb_remote_del()
-> vxlan_mdb_remote_srcs_del()
-> vxlan_mdb_remote_src_del()
-> vxlan_mdb_remote_src_fwd_del()
-> __vxlan_mdb_del()
-> vxlan_mdb_entry_put()
Such an entry can be located after the (*, G) entry in the list, as
vxlan_mdb_entry_get() returns an existing entry without moving it to the
head of the list. This order is obtained by adding the (S, G) entry
before the (*, G) entry, the latter with NLM_F_REPLACE, as the addition
of the source otherwise fails with -EEXIST. The (S, G) entry is then the
entry saved by hlist_for_each_entry_safe() and it is freed while the
(*, G) entry is processed. The next iteration calls hlist_del() on it
again, writing LIST_POISON1 to LIST_POISON2 [1].
Besides device deletion, the flush is also reachable from RTM_DELMDB
with NLM_F_BULK.
Fix by re-reading the next entry after the remotes were flushed. The
current entry cannot be removed by this flush, as source lists can only
be configured on (*, G) entries and the removed entries are (S, G)
entries. It is therefore still linked and its next pointer reflects the
removals.
[1]
BUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588
Write of size 8 at addr dead000000000122 by task ip/327
CPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT
Call trace:
vxlan_mdb_entry_put.part.0+0x328/0x588
vxlan_mdb_flush+0x1d8/0x25c
vxlan_mdb_fini+0x8c/0x100
vxlan_uninit+0x1c/0x7c
unregister_netdevice_many_notify+0x954/0xd4c
rtnl_dellink+0x210/0x530
rtnetlink_rcv_msg+0x434/0x4d0
netlink_rcv_skb+0xc4/0x204
rtnetlink_rcv+0x18/0x24
netlink_unicast+0x4b8/0x548
netlink_sendmsg+0x29c/0x560
____sys_sendmsg+0x390/0x3ec
___sys_sendmsg+0x114/0x188
__sys_sendmsg+0xf0/0x178
__arm64_sys_sendmsg+0x48/0x60
invoke_syscall.constprop.0+0x58/0x180
el0_svc_common.constprop.0+0x74/0x140
do_el0_svc+0x30/0x40
el0_svc+0x38/0x98
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_flush()
vxlan_mdb_flush() iterates over the MDB entries using
hlist_for_each_entry_safe(), which only tolerates the removal of the
current entry. Contrary to the comment above the loop, the removal of an
entry can trigger the removal of another entry.
Flushing the remotes of a (*, G) entry also removes the (S, G) entries
that were created for its source list, once they are left without
remotes:
vxlan_mdb_remotes_flush()
-> vxlan_mdb_remote_del()
-> vxlan_mdb_remote_srcs_del()
-> vxlan_mdb_remote_src_del()
-> vxlan_mdb_remote_src_fwd_del()
-> __vxlan_mdb_del()
-> vxlan_mdb_entry_put()
Such an entry can be located after the (*, G) entry in the list, as
vxlan_mdb_entry_get() returns an existing entry without moving it to the
head of the list. This order is obtained by adding the (S, G) entry
before the (*, G) entry, the latter with NLM_F_REPLACE, as the addition
of the source otherwise fails with -EEXIST. The (S, G) entry is then the
entry saved by hlist_for_each_entry_safe() and it is freed while the
(*, G) entry is processed. The next iteration calls hlist_del() on it
again, writing LIST_POISON1 to LIST_POISON2 [1].
Besides device deletion, the flush is also reachable from RTM_DELMDB
with NLM_F_BULK.
Fix by re-reading the next entry after the remotes were flushed. The
current entry cannot be removed by this flush, as source lists can only
be configured on (*, G) entries and the removed entries are (S, G)
entries. It is therefore still linked and its next pointer reflects the
removals.
[1]
BUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588
Write of size 8 at addr dead000000000122 by task ip/327
CPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT
Call trace:
vxlan_mdb_entry_put.part.0+0x328/0x588
vxlan_mdb_flush+0x1d8/0x25c
vxlan_mdb_fini+0x8c/0x100
vxlan_uninit+0x1c/0x7c
unregister_netdevice_many_notify+0x954/0xd4c
rtnl_dellink+0x210/0x530
rtnetlink_rcv_msg+0x434/0x4d0
netlink_rcv_skb+0xc4/0x204
rtnetlink_rcv+0x18/0x24
netlink_unicast+0x4b8/0x548
netlink_sendmsg+0x29c/0x560
____sys_sendmsg+0x390/0x3ec
___sys_sendmsg+0x114/0x188
__sys_sendmsg+0xf0/0x178
__arm64_sys_sendmsg+0x48/0x60
invoke_syscall.constprop.0+0x58/0x180
el0_svc_common.constprop.0+0x74/0x140
do_el0_svc+0x30/0x40
el0_svc+0x38/0x98
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
🎖@cveNotify
🚨 CVE-2026-93251
In the Linux kernel, the following vulnerability has been resolved:
ACPI: bus: Introduce acpi_bus_get_primary_device()
The function used for obtaining the first "physical" device for which
the given ACPI one is the ACPI companion, acpi_get_first_physical_node(),
may return a stale device pointer (mostly in theory) because
acpi_unbind_one() may run as a whole after dropping the ACPI device's
physical_node_lock in acpi_get_first_physical_node() and before it
returns. The last reference to the "physical" device may be dropped
then before the pointer to it is returned to the caller.
If that happens and the acpi_get_first_physical_node() caller invokes
get_device() on the pointer obtained from it, which is done by the
majority of its callers, a use-after-free will occur.
To prepare for addressing this problem, introduce a new function for
getting the first "physical" device associated with the given ACPI one
(the "primary physical device") that will also reference count the
device in question before returning a pointer to it.
Make that new function and acpi_get_first_physical_node() share the
physical node list lookup code.
No intentional functional impact.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ACPI: bus: Introduce acpi_bus_get_primary_device()
The function used for obtaining the first "physical" device for which
the given ACPI one is the ACPI companion, acpi_get_first_physical_node(),
may return a stale device pointer (mostly in theory) because
acpi_unbind_one() may run as a whole after dropping the ACPI device's
physical_node_lock in acpi_get_first_physical_node() and before it
returns. The last reference to the "physical" device may be dropped
then before the pointer to it is returned to the caller.
If that happens and the acpi_get_first_physical_node() caller invokes
get_device() on the pointer obtained from it, which is done by the
majority of its callers, a use-after-free will occur.
To prepare for addressing this problem, introduce a new function for
getting the first "physical" device associated with the given ACPI one
(the "primary physical device") that will also reference count the
device in question before returning a pointer to it.
Make that new function and acpi_get_first_physical_node() share the
physical node list lookup code.
No intentional functional impact.
🎖@cveNotify
🚨 CVE-2026-93252
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix circular locking dependency in ocfs2_init_acl()
A lockdep warning indicates a circular locking dependency between
`&oi->ip_xattr_sem` and `&journal->j_trans_barrier`:
WARNING: possible circular locking dependency detected
is trying to acquire lock:
(&oi->ip_xattr_sem){++++}-{4:4}, at: ocfs2_init_acl+0x2fd/0x7e0
fs/ocfs2/acl.c:367
but task is already holding lock:
(&journal->j_trans_barrier){.+.+}-{4:4}, at: ocfs2_start_trans+0x3ab/0x700
fs/ocfs2/journal.c:369
The deadlock involves two code paths: Path 1 (setxattr) where
`ocfs2_xattr_set()` acquires `ip_xattr_sem` (write) and then starts a
transaction, which acquires `j_trans_barrier` (read); and Path 2
(mkdir/mknod) where `ocfs2_mknod()` starts a transaction (`j_trans_barrier`
read) and then calls `ocfs2_init_acl()`, which attempts to acquire
`ip_xattr_sem` (read) on the parent directory to retrieve the default ACL.
Because rw_semaphores are subject to writer priority, a pending writer on
`j_trans_barrier` (e.g., the journal commit thread) can cause Path 1 to
block, while Path 2 is blocked waiting for Path 1 to release
`ip_xattr_sem`.
The patch fixes the lock ordering by precomputing the ACL state before
starting the OCFS2 transaction, while preserving POSIX ACL storage
semantics and the existing inode/security initialization order. By reading
the parent directory's default ACL and preparing the new inode's ACLs
outside the transaction, `ip_xattr_sem` is always acquired before
`j_trans_barrier`.
`struct ocfs2_acl_state` encapsulates the prepared ACL state, while
`ocfs2_acl_init_prepare()` and `ocfs2_acl_init_release()` avoid code
duplication between `ocfs2_mknod()` and `ocfs2_init_security_and_acl()`.
`ocfs2_calc_xattr_init()` and `ocfs2_init_acl()` use this precomputed
state, removing internal `ip_xattr_sem` acquisition and redundant disk
reads.
Additionally, remove the `ip_xattr_sem` acquisition from
`ocfs2_xattr_set_handle()`. This function is only used while initializing a
new inode that has not yet been inserted into the inode hash or attached to
a dentry, meaning there is no risk of concurrent access and the lock is
unnecessary.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix circular locking dependency in ocfs2_init_acl()
A lockdep warning indicates a circular locking dependency between
`&oi->ip_xattr_sem` and `&journal->j_trans_barrier`:
WARNING: possible circular locking dependency detected
is trying to acquire lock:
(&oi->ip_xattr_sem){++++}-{4:4}, at: ocfs2_init_acl+0x2fd/0x7e0
fs/ocfs2/acl.c:367
but task is already holding lock:
(&journal->j_trans_barrier){.+.+}-{4:4}, at: ocfs2_start_trans+0x3ab/0x700
fs/ocfs2/journal.c:369
The deadlock involves two code paths: Path 1 (setxattr) where
`ocfs2_xattr_set()` acquires `ip_xattr_sem` (write) and then starts a
transaction, which acquires `j_trans_barrier` (read); and Path 2
(mkdir/mknod) where `ocfs2_mknod()` starts a transaction (`j_trans_barrier`
read) and then calls `ocfs2_init_acl()`, which attempts to acquire
`ip_xattr_sem` (read) on the parent directory to retrieve the default ACL.
Because rw_semaphores are subject to writer priority, a pending writer on
`j_trans_barrier` (e.g., the journal commit thread) can cause Path 1 to
block, while Path 2 is blocked waiting for Path 1 to release
`ip_xattr_sem`.
The patch fixes the lock ordering by precomputing the ACL state before
starting the OCFS2 transaction, while preserving POSIX ACL storage
semantics and the existing inode/security initialization order. By reading
the parent directory's default ACL and preparing the new inode's ACLs
outside the transaction, `ip_xattr_sem` is always acquired before
`j_trans_barrier`.
`struct ocfs2_acl_state` encapsulates the prepared ACL state, while
`ocfs2_acl_init_prepare()` and `ocfs2_acl_init_release()` avoid code
duplication between `ocfs2_mknod()` and `ocfs2_init_security_and_acl()`.
`ocfs2_calc_xattr_init()` and `ocfs2_init_acl()` use this precomputed
state, removing internal `ip_xattr_sem` acquisition and redundant disk
reads.
Additionally, remove the `ip_xattr_sem` acquisition from
`ocfs2_xattr_set_handle()`. This function is only used while initializing a
new inode that has not yet been inserted into the inode hash or attached to
a dentry, meaning there is no risk of concurrent access and the lock is
unnecessary.
🎖@cveNotify
🚨 CVE-2026-93253
In the Linux kernel, the following vulnerability has been resolved:
sched/isolation: Defer freeing of cpumask memblock memory to initcall
When testing a linux-next kernel with commit 59bd1d914bb5 ("memblock:
warn when freeing reserved memory before memory map is initialized"),
the following warning was hit when there was a "nohz_full" kernel boot
parameter.
Cannot free reserved memory because of deferred initialization of the memory map
WARNING: mm/memblock.c:904 at __free_reserved_area+0xde/0xf0, CPU#0: swapper/0/0
:
Call Trace:
<TASK>
memblock_phys_free+0xcb/0x100
housekeeping_init+0x14c/0x170
start_kernel+0x207/0x450
x86_64_start_reservations+0x24/0x30
x86_64_start_kernel+0xda/0xe0
common_startup_64+0x13e/0x141
</TASK>
IOW, we shouldn't free memblock allocated memory so early
in the boot process when memory map isn't fully initialized in
deferred_init_memmap().
Fix it by saving the housekeeping cpumask memblock memory to be
freed into a llist free list in housekeeping_init() and add a new
housekeeping_late_init() helper to defer the actual freeing of memblock
memory to when initcall's are being processed. The cpumask memblock
memory is treated as a llist_node with the size of a "long" type which
is also smallest cpumask size that can be allocated.
The non-atomic version of the llist APIs are used as there is no
contention.
This commit depends on the presence of commit 7c2eee9c1367 ("memblock:
don't touch memblock arrays when memblock_free() is called late")
to prevent a KASAN UAF bug report [1].
[1] https://lore.kernel.org/lkml/20260505051821.1107133-1-longman@redhat.com/
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
sched/isolation: Defer freeing of cpumask memblock memory to initcall
When testing a linux-next kernel with commit 59bd1d914bb5 ("memblock:
warn when freeing reserved memory before memory map is initialized"),
the following warning was hit when there was a "nohz_full" kernel boot
parameter.
Cannot free reserved memory because of deferred initialization of the memory map
WARNING: mm/memblock.c:904 at __free_reserved_area+0xde/0xf0, CPU#0: swapper/0/0
:
Call Trace:
<TASK>
memblock_phys_free+0xcb/0x100
housekeeping_init+0x14c/0x170
start_kernel+0x207/0x450
x86_64_start_reservations+0x24/0x30
x86_64_start_kernel+0xda/0xe0
common_startup_64+0x13e/0x141
</TASK>
IOW, we shouldn't free memblock allocated memory so early
in the boot process when memory map isn't fully initialized in
deferred_init_memmap().
Fix it by saving the housekeeping cpumask memblock memory to be
freed into a llist free list in housekeeping_init() and add a new
housekeeping_late_init() helper to defer the actual freeing of memblock
memory to when initcall's are being processed. The cpumask memblock
memory is treated as a llist_node with the size of a "long" type which
is also smallest cpumask size that can be allocated.
The non-atomic version of the llist APIs are used as there is no
contention.
This commit depends on the presence of commit 7c2eee9c1367 ("memblock:
don't touch memblock arrays when memblock_free() is called late")
to prevent a KASAN UAF bug report [1].
[1] https://lore.kernel.org/lkml/20260505051821.1107133-1-longman@redhat.com/
🎖@cveNotify