🚨 CVE-2026-84716
A flaw was found in the automation-controller instance
install-bundle endpoint. When a System Administrator downloads
an execution/hop node's install bundle, the controller signs an
X.509 certificate with the receptor mesh certificate authority
in which the Common Name, DNS subject-alternative-name, and
receptor node-id are taken verbatim from the caller-chosen
instance hostname, with a hard-coded ten-year validity, a random
serial, and no issuance log or revocation list. Because the
hostname charset validator is case-insensitive while the
uniqueness validator is case-sensitive, an administrator can
register a case variant of an existing control node's hostname
and obtain a mesh-CA-signed certificate that TLS peers, which
match hostnames case-insensitively, accept as that control node.
In managed/hosted deployments — where the customer holds
controller superuser but the platform operator runs the mesh —
this yields a long-lived, non-revocable mesh peer credential and,
with an on-path position, TLS impersonation or interception of
control/hybrid mesh nodes. It does not grant direct remote code
execution, because receptor work submission is gated by a
separate signing key not included in the bundle.
🎖@cveNotify
A flaw was found in the automation-controller instance
install-bundle endpoint. When a System Administrator downloads
an execution/hop node's install bundle, the controller signs an
X.509 certificate with the receptor mesh certificate authority
in which the Common Name, DNS subject-alternative-name, and
receptor node-id are taken verbatim from the caller-chosen
instance hostname, with a hard-coded ten-year validity, a random
serial, and no issuance log or revocation list. Because the
hostname charset validator is case-insensitive while the
uniqueness validator is case-sensitive, an administrator can
register a case variant of an existing control node's hostname
and obtain a mesh-CA-signed certificate that TLS peers, which
match hostnames case-insensitively, accept as that control node.
In managed/hosted deployments — where the customer holds
controller superuser but the platform operator runs the mesh —
this yields a long-lived, non-revocable mesh peer credential and,
with an on-path position, TLS impersonation or interception of
control/hybrid mesh nodes. It does not grant direct remote code
execution, because receptor work submission is gated by a
separate signing key not included in the bundle.
🎖@cveNotify
🚨 CVE-2026-84721
A server-side request forgery flaw was found in the Ansible Automation Platform
automation-controller email notification backend. The email backend passes the user-supplied SMTP
host and port from a notification template directly to the SMTP client without validating that
the target is not an internal, loopback, link-local, or reserved address. An authenticated user
with organization notification-admin permission can create or modify an email notification
template pointing at an arbitrary internal address, trigger a test, and have the controller task
process open a raw TCP connection to that address. The resulting connection error is reflected
back through the notification record, providing a three-state internal port-scan oracle (open,
closed, filtered) over the control-plane's cluster network, including the in-cluster Kubernetes
API. When a shared organization template holds a stored SMTP password, redirecting the host can
also cause that credential to be transmitted to an attacker-controlled server.
🎖@cveNotify
A server-side request forgery flaw was found in the Ansible Automation Platform
automation-controller email notification backend. The email backend passes the user-supplied SMTP
host and port from a notification template directly to the SMTP client without validating that
the target is not an internal, loopback, link-local, or reserved address. An authenticated user
with organization notification-admin permission can create or modify an email notification
template pointing at an arbitrary internal address, trigger a test, and have the controller task
process open a raw TCP connection to that address. The resulting connection error is reflected
back through the notification record, providing a three-state internal port-scan oracle (open,
closed, filtered) over the control-plane's cluster network, including the in-cluster Kubernetes
API. When a shared organization template holds a stored SMTP password, redirecting the host can
also cause that credential to be transmitted to an attacker-controlled server.
🎖@cveNotify
🚨 CVE-2026-96552
A vulnerability was identified in sfturing hosp_order up to 627f426331da8086ce8fff2017d65b1ddef384f8. The affected element is the function MD5.getMD5 of the file ssm_pro/src/main/java/cn/sfturing/utils/MD5.java of the component User Password Handler. The manipulation leads to one-way hash without salt. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitability is described as difficult. The exploit is publicly available and might be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet.
🎖@cveNotify
A vulnerability was identified in sfturing hosp_order up to 627f426331da8086ce8fff2017d65b1ddef384f8. The affected element is the function MD5.getMD5 of the file ssm_pro/src/main/java/cn/sfturing/utils/MD5.java of the component User Password Handler. The manipulation leads to one-way hash without salt. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitability is described as difficult. The exploit is publicly available and might be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet.
🎖@cveNotify
GitHub
GitHub - sfturing/hosp_order: 🤒医院预约挂号系统(期末项目/毕业设计)
🤒医院预约挂号系统(期末项目/毕业设计). Contribute to sfturing/hosp_order development by creating an account on GitHub.
🚨 CVE-2026-66068
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, ?LOG_DEBUG("shutting down Shovel '~ts', ... Shovel state: ~tp", [Name, State]) formats the entire state map. The 'uris' field holds plaintext URIs after credentials_obfuscation:decrypt (called in rabbit_shovel_util:deobfuscated_uris/2). No format_status/1,2 callback exists in rabbit_shovel_worker to redact it. Triggered when an autodelete shovel (src-delete-after = N) completes. With DEBUG logging enabled, autodelete-shovel completion writes the full shovel state map , including decrypted amqp://user:password@host/ URIs , to the broker log file. Preconditions include Shovel plugin enabled with URI-embedded credentials DEBUG log level (non-default) Autodelete shovel configuration Attacker has log read access. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
🎖@cveNotify
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, ?LOG_DEBUG("shutting down Shovel '~ts', ... Shovel state: ~tp", [Name, State]) formats the entire state map. The 'uris' field holds plaintext URIs after credentials_obfuscation:decrypt (called in rabbit_shovel_util:deobfuscated_uris/2). No format_status/1,2 callback exists in rabbit_shovel_worker to redact it. Triggered when an autodelete shovel (src-delete-after = N) completes. With DEBUG logging enabled, autodelete-shovel completion writes the full shovel state map , including decrypted amqp://user:password@host/ URIs , to the broker log file. Preconditions include Shovel plugin enabled with URI-embedded credentials DEBUG log level (non-default) Autodelete shovel configuration Attacker has log read access. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
🎖@cveNotify
GitHub
Release RabbitMQ 4.2.6 · rabbitmq/rabbitmq-server
RabbitMQ 4.2.6 is a maintenance release in the 4.2.x release series.
It is strongly recommended that you read 4.2.0 release notes
in detail if upgrading from a version prior to 4.2.0.
Minimum Suppo...
It is strongly recommended that you read 4.2.0 release notes
in detail if upgrading from a version prior to 4.2.0.
Minimum Suppo...
🚨 CVE-2026-66080
RabbitMQ is a messaging and streaming broker. Prior to versions 4.1.11, 4.2.6, and 4.3.0, validate_partitions only checks that the requested partition count is at least 1, with no upper bound. A large count such as lists:seq(0, 500000000) allocates roughly 8GB. Preconditions include The rabbitmq_stream_management plugin must be enabled. The caller needs the management tag and access to the target vhost.. This issue is fixed in versions 4.1.11, 4.2.6, and 4.3.0.
🎖@cveNotify
RabbitMQ is a messaging and streaming broker. Prior to versions 4.1.11, 4.2.6, and 4.3.0, validate_partitions only checks that the requested partition count is at least 1, with no upper bound. A large count such as lists:seq(0, 500000000) allocates roughly 8GB. Preconditions include The rabbitmq_stream_management plugin must be enabled. The caller needs the management tag and access to the target vhost.. This issue is fixed in versions 4.1.11, 4.2.6, and 4.3.0.
🎖@cveNotify
GitHub
Release RabbitMQ 4.2.6 · rabbitmq/rabbitmq-server
RabbitMQ 4.2.6 is a maintenance release in the 4.2.x release series.
It is strongly recommended that you read 4.2.0 release notes
in detail if upgrading from a version prior to 4.2.0.
Minimum Suppo...
It is strongly recommended that you read 4.2.0 release notes
in detail if upgrading from a version prior to 4.2.0.
Minimum Suppo...
🚨 CVE-2026-67224
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, The trace consumer constructs the output path as filename:join(TraceDir, Name ++ ".log") where Name comes from PUT /api/traces/:vhost/:name. No safe_relative_path / traversal check is applied on the write side, while the read side (rabbit_tracing_files.erl) does call rabbit_misc:safe_relative_path/1 , proving the omission is an oversight, not design. The .log suffix is forced and the endpoint requires administrator. A user with the administrator tag can write a .log-suffixed file to an arbitrary filesystem path writable by the rabbitmq user via the tracing plugin's name parameter, e.g. /etc/cron.d/x.log (if writable) or overwrite existing .log files outside the trace directory. Preconditions include rabbitmq_tracing plugin enabled administrator tag Target path writable by rabbitmq OS user. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1.
🎖@cveNotify
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, The trace consumer constructs the output path as filename:join(TraceDir, Name ++ ".log") where Name comes from PUT /api/traces/:vhost/:name. No safe_relative_path / traversal check is applied on the write side, while the read side (rabbit_tracing_files.erl) does call rabbit_misc:safe_relative_path/1 , proving the omission is an oversight, not design. The .log suffix is forced and the endpoint requires administrator. A user with the administrator tag can write a .log-suffixed file to an arbitrary filesystem path writable by the rabbitmq user via the tracing plugin's name parameter, e.g. /etc/cron.d/x.log (if writable) or overwrite existing .log files outside the trace directory. Preconditions include rabbitmq_tracing plugin enabled administrator tag Target path writable by rabbitmq OS user. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1.
🎖@cveNotify
GitHub
Release RabbitMQ 4.2.6 · rabbitmq/rabbitmq-server
RabbitMQ 4.2.6 is a maintenance release in the 4.2.x release series.
It is strongly recommended that you read 4.2.0 release notes
in detail if upgrading from a version prior to 4.2.0.
Minimum Suppo...
It is strongly recommended that you read 4.2.0 release notes
in detail if upgrading from a version prior to 4.2.0.
Minimum Suppo...
🚨 CVE-2026-67232
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The cowboy WebSocket options at line 117 set compress => true, enabling RFC 7692 permessage-deflate negotiation. The handler does not set max_frame_size, so cowboy's default of infinity applies. cowlib's cow_ws:parse_payload/9 calls zlib:inflate/2 on the compressed payload with no output-size limit. An attacker can negotiate permessage-deflate during the WebSocket upgrade and send a frame containing a zlib bomb (e.g. 50 KB → 5 GB). Decompression occurs in the connection process before websocket_handle/2 ever sees the MQTT bytes. An unauthenticated attacker can crash a RabbitMQ node running the Web-MQTT plugin by sending a single highly-compressed WebSocket frame (a few KB on the wire) that inflates to gigabytes in memory. The cowboy WebSocket handler decompresses the entire frame before the MQTT CONNECT packet is processed, so no credentials are required. Preconditions include rabbitmq_web_mqtt plugin enabled (not default, but common for browser clients) Network reachability to port 15675/15676 No authentication required. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
🎖@cveNotify
RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The cowboy WebSocket options at line 117 set compress => true, enabling RFC 7692 permessage-deflate negotiation. The handler does not set max_frame_size, so cowboy's default of infinity applies. cowlib's cow_ws:parse_payload/9 calls zlib:inflate/2 on the compressed payload with no output-size limit. An attacker can negotiate permessage-deflate during the WebSocket upgrade and send a frame containing a zlib bomb (e.g. 50 KB → 5 GB). Decompression occurs in the connection process before websocket_handle/2 ever sees the MQTT bytes. An unauthenticated attacker can crash a RabbitMQ node running the Web-MQTT plugin by sending a single highly-compressed WebSocket frame (a few KB on the wire) that inflates to gigabytes in memory. The cowboy WebSocket handler decompresses the entire frame before the MQTT CONNECT packet is processed, so no credentials are required. Preconditions include rabbitmq_web_mqtt plugin enabled (not default, but common for browser clients) Network reachability to port 15675/15676 No authentication required. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0.
🎖@cveNotify
GitHub
Release RabbitMQ 4.2.6 · rabbitmq/rabbitmq-server
RabbitMQ 4.2.6 is a maintenance release in the 4.2.x release series.
It is strongly recommended that you read 4.2.0 release notes
in detail if upgrading from a version prior to 4.2.0.
Minimum Suppo...
It is strongly recommended that you read 4.2.0 release notes
in detail if upgrading from a version prior to 4.2.0.
Minimum Suppo...
🚨 CVE-2026-67235
RabbitMQ is a messaging and streaming broker. Prior to versions 4.3.0, 4.2.6, 4.1.11, 4.0.20, and 3.13.15, The content-header BodySize (a uint64) was stored without validation against max_message_size. The size check ran only when assembly completed. By declaring body_size = 2^63-1 and then streaming fragments, a client ensured that check_msg_size never fired, so the accumulated body size went unbounded. A reader process accumulates memory until the memory alarm fires, degrading all publishers cluster-wide, or until the node runs out of memory. The memory alarm provides only partial mitigation, since it is reactive rather than preventive. AMQP 0-9-1 is the most widely used protocol, and any publisher can trigger this condition. Preconditions include Any authenticated AMQP 0-9-1 client with publish permission can exploit this.. This issue is fixed in versions 4.3.0, 4.2.6, 4.1.11, 4.0.20, and 3.13.15.
🎖@cveNotify
RabbitMQ is a messaging and streaming broker. Prior to versions 4.3.0, 4.2.6, 4.1.11, 4.0.20, and 3.13.15, The content-header BodySize (a uint64) was stored without validation against max_message_size. The size check ran only when assembly completed. By declaring body_size = 2^63-1 and then streaming fragments, a client ensured that check_msg_size never fired, so the accumulated body size went unbounded. A reader process accumulates memory until the memory alarm fires, degrading all publishers cluster-wide, or until the node runs out of memory. The memory alarm provides only partial mitigation, since it is reactive rather than preventive. AMQP 0-9-1 is the most widely used protocol, and any publisher can trigger this condition. Preconditions include Any authenticated AMQP 0-9-1 client with publish permission can exploit this.. This issue is fixed in versions 4.3.0, 4.2.6, 4.1.11, 4.0.20, and 3.13.15.
🎖@cveNotify
GitHub
Release RabbitMQ 4.2.6 · rabbitmq/rabbitmq-server
RabbitMQ 4.2.6 is a maintenance release in the 4.2.x release series.
It is strongly recommended that you read 4.2.0 release notes
in detail if upgrading from a version prior to 4.2.0.
Minimum Suppo...
It is strongly recommended that you read 4.2.0 release notes
in detail if upgrading from a version prior to 4.2.0.
Minimum Suppo...
🚨 CVE-2026-6718
IBM Concert 1.0.0 through 3.0.0 is vulnerable to improper access control which allows unauthorized modification of application files.
🎖@cveNotify
IBM Concert 1.0.0 through 3.0.0 is vulnerable to improper access control which allows unauthorized modification of application files.
🎖@cveNotify
Ibm
Security Bulletin: Multiple Vulnerabilities in IBM Concert Software
Multiple vulnerabilities were addressed in IBM Concert Software version 3.0.1.1
🚨 CVE-2026-6928
IBM Concert 1.0.0 through 3.0.0 references or accesses memory after it has been freed. This allows an attacker who can influence program execution or input may exploit this condition to corrupt memory, cause application crashes, or execute arbitrary code.
🎖@cveNotify
IBM Concert 1.0.0 through 3.0.0 references or accesses memory after it has been freed. This allows an attacker who can influence program execution or input may exploit this condition to corrupt memory, cause application crashes, or execute arbitrary code.
🎖@cveNotify
Ibm
Security Bulletin: Multiple Vulnerabilities in IBM Concert Software
Multiple vulnerabilities were addressed in IBM Concert Software version 3.0.1.1
🚨 CVE-2026-75887
A flaw was found in the OpenShift console. An unauthenticated attacker can exploit a path traversal vulnerability by manipulating the `lng` and `ns` query parameters in the `/locales/resource.json` endpoint. This allows the attacker to read sensitive `*.json` files from the pod filesystem, including plugin manifests and configuration files. Furthermore, this flaw can enable path traversal against registered dynamic-plugin backends.
🎖@cveNotify
A flaw was found in the OpenShift console. An unauthenticated attacker can exploit a path traversal vulnerability by manipulating the `lng` and `ns` query parameters in the `/locales/resource.json` endpoint. This allows the attacker to read sensitive `*.json` files from the pod filesystem, including plugin manifests and configuration files. Furthermore, this flaw can enable path traversal against registered dynamic-plugin backends.
🎖@cveNotify
Redhat
CVE-2026-75887 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-80423
IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to obtain sensitive information due to the exposure of namespace-wide secrets via accessible file mounts.
🎖@cveNotify
IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to obtain sensitive information due to the exposure of namespace-wide secrets via accessible file mounts.
🎖@cveNotify
Ibm
Security Bulletin: DataStage on Cloud Pak for Data has several vulnerabilities
Several vulnerabilities were found in DataStage on Cloud Pak for Data
🚨 CVE-2026-93352
Laravel-Mediable 7.0.0 before 7.0.2 contains an incomplete patch for CVE-2026-49972 in which the .pht extension is absent from the forbidden_extensions blocklist in config/mediable.php. The blocklist introduced to address CVE-2026-49972 includes phpt but omits pht, which Apache executes as PHP via the default FilesMatch directive on Debian and Ubuntu systems. An attacker can upload a .pht file that passes all validation in MediaUploader::verifyExtension() and File::sanitizeFileName() because pht is not present in the blocklist, causing the file to be written to disk and executed as PHP when requested, enabling remote code execution with the privileges of the web server process.
🎖@cveNotify
Laravel-Mediable 7.0.0 before 7.0.2 contains an incomplete patch for CVE-2026-49972 in which the .pht extension is absent from the forbidden_extensions blocklist in config/mediable.php. The blocklist introduced to address CVE-2026-49972 includes phpt but omits pht, which Apache executes as PHP via the default FilesMatch directive on Debian and Ubuntu systems. An attacker can upload a .pht file that passes all validation in MediaUploader::verifyExtension() and File::sanitizeFileName() because pht is not present in the blocklist, causing the file to be written to disk and executed as PHP when requested, enabling remote code execution with the privileges of the web server process.
🎖@cveNotify
GitHub
fix: CVE-2026-49972 disallow pht files to prevent RCE · plank/laravel-mediable@8ddb0e5
Laravel-Mediable is a package for easily uploading and attaching media files to models with Laravel - fix: CVE-2026-49972 disallow pht files to prevent RCE · plank/laravel-mediable@8ddb0e5
🚨 CVE-2026-96601
A vulnerability was detected in Abdurrab5 online-makeup-store. This affects an unknown function of the file index.php of the component Admin Login Handler. The manipulation of the argument id/password results in sql injection. The attack can be executed remotely. The exploit is now public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The vendor was contacted early about this disclosure.
🎖@cveNotify
A vulnerability was detected in Abdurrab5 online-makeup-store. This affects an unknown function of the file index.php of the component Admin Login Handler. The manipulation of the argument id/password results in sql injection. The attack can be executed remotely. The exploit is now public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The vendor was contacted early about this disclosure.
🎖@cveNotify
GitHub
cve-writeups/online-makeup-store/01-admin-login-sqli.md at main · yashkeral/cve-writeups
Contribute to yashkeral/cve-writeups development by creating an account on GitHub.
🚨 CVE-2026-96604
A vulnerability was identified in SoftNews Media Group DataLife Engine 18.0. This affects the function strip_data of the file engine/modules/search.php of the component Search Module. The manipulation of the argument story leads to sql injection. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A vulnerability was identified in SoftNews Media Group DataLife Engine 18.0. This affects the function strip_data of the file engine/modules/search.php of the component Search Module. The manipulation of the argument story leads to sql injection. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
Pastebin
DataLife Engine 18.0 - Unauthenticated Blind SQL Injection in modules/search.php - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
🚨 CVE-2026-96739
A flaw has been found in SEMCMS up to 4.2. Affected by this issue is some unknown functionality of the file /Edit/php/upload_json.php of the component KindEditor Upload Interface. This manipulation of the argument imgFile causes cross site scripting. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A flaw has been found in SEMCMS up to 4.2. Affected by this issue is some unknown functionality of the file /Edit/php/upload_json.php of the component KindEditor Upload Interface. This manipulation of the argument imgFile causes cross site scripting. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
GitHub
SEMCMS PHP 4.2 Unauthenticated HTML File Upload Vulnerability · Issue #7 · CSDVi/cve
SEMCMS PHP 4.2 Unauthenticated HTML File Upload Vulnerability NAME OF AFFECTED PRODUCT(S) SEMCMS Foreign Trade Website PHP Multilingual Version AFFECTED AND/OR FIXED VERSION(S) Affected: 4.2; Fixed...
🚨 CVE-2026-96772
A security flaw has been discovered in Intelliants Subrion CMS up to 4.2.1. This affects an unknown part of the file /actions.json?action=assign-owner. The manipulation of the argument q results in information disclosure. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A security flaw has been discovered in Intelliants Subrion CMS up to 4.2.1. This affects an unknown part of the file /actions.json?action=assign-owner. The manipulation of the argument q results in information disclosure. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
GitHub
Unauthenticated Active-Member Enumeration and Email Disclosure in Subrion CMS 4.2.1 · Issue #1 · volksec/SubrionCMS-Security-Advisories
Subrion CMS 4.2.1 - Unauthenticated Active-Member Enumeration and Email Disclosure Summary Subrion CMS 4.2.1 exposes the public JSON action assign-owner without authentication or authorization. A r...
🚨 CVE-2026-96810
A vulnerability was identified in huanzi-qch base-admin up to 52816b760cd53244989fd664bbb2b3d4edbfdbf1. This issue affects the function Save of the file base-admin-master\src\main\java\cn\huanzi\qch\baseadmin\common\controller\CommonController.java of the component Add User Handler. The manipulation of the argument Username leads to cross site scripting. The attack can be initiated remotely. The exploit is publicly available and might be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A vulnerability was identified in huanzi-qch base-admin up to 52816b760cd53244989fd664bbb2b3d4edbfdbf1. This issue affects the function Save of the file base-admin-master\src\main\java\cn\huanzi\qch\baseadmin\common\controller\CommonController.java of the component Add User Handler. The manipulation of the argument Username leads to cross site scripting. The attack can be initiated remotely. The exploit is publicly available and might be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
GitHub
cve-db/BaseAdminSystem - Introduction_to_Storage-Based_XSS_Vulnerability.md at master · jac40577-art/cve-db
CVE Vulnerability Submission CVE . Contribute to jac40577-art/cve-db development by creating an account on GitHub.
🚨 CVE-2026-96891
A vulnerability was identified in D-Link DIR-825 3.00b32. Affected is the function tunnel_set_params of the file tunnel.c of the component rp-l2tp. The manipulation of the argument peer_hostname leads to out-of-bounds write. The attack may be initiated remotely.
🎖@cveNotify
A vulnerability was identified in D-Link DIR-825 3.00b32. Affected is the function tunnel_set_params of the file tunnel.c of the component rp-l2tp. The manipulation of the argument peer_hostname leads to out-of-bounds write. The attack may be initiated remotely.
🎖@cveNotify
tzh00203 on Notion
D-Link DIR-825 L2TP Host Name AVP Out-of-Bounds Write | Notion
Vulnerability Title: Out-of-Bounds Write in rp-l2tp Host Name AVP Parsing of D-Link DIR-825
🚨 CVE-2026-96898
A vulnerability was detected in yhx070424 ShopXO up to 2.2.7. Affected by this vulnerability is an unknown functionality of the file config/ueditor.php of the component Ueditor Upload Interface. The manipulation of the argument path_type results in path traversal. It is possible to launch the attack remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.
🎖@cveNotify
A vulnerability was detected in yhx070424 ShopXO up to 2.2.7. Affected by this vulnerability is an unknown functionality of the file config/ueditor.php of the component Ueditor Upload Interface. The manipulation of the argument path_type results in path traversal. It is possible to launch the attack remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.
🎖@cveNotify
Gitee
纵之格/ShopXO: 🔥🔥🔥ShopXO企业级免费开源商城系统，可视化DIY拖拽装修、包含PC、H5、多端小程序(微信+支付宝+百度+头条&抖音+QQ+快手)、APP、多仓库、多商户、多门店、IM客服、进销存，遵循MIT开源协议发布、基于ThinkPHP8框架研发
🚨 CVE-2026-12227
The Visual Composer Website Builder plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 45.16.0 via the `vcv-template` parameter. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included.
🎖@cveNotify
The Visual Composer Website Builder plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 45.16.0 via the `vcv-template` parameter. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included.
🎖@cveNotify