🚨 CVE-2026-18214
Keycloak allows users to log in using Google accounts and can be configured to only allow users from specific Google Workspace domains. A flaw was found where the token exchange feature, which allows swapping a Google token for a Keycloak token, does not check these domain restrictions. This means an attacker with a valid Google account from a different domain could bypass the security check and gain access to the Keycloak realm.

🎖@cveNotify

🚨 CVE-2026-18215
Keycloak provides a way to let users log in using Microsoft accounts while restricting access to a specific organization (tenant). A flaw was discovered where this restriction is ignored when using the token exchange feature. This means an attacker with a valid Microsoft token from a completely different organization could gain access to the Keycloak realm, potentially accessing sensitive data or performing unauthorized actions.

🎖@cveNotify

🚨 CVE-2026-18218
A flaw was found in the TokenManager component of the Keycloak identity management service. When an administrator attempts to revoke tokens for a specific application (client) using a "not-before" policy, the revocation may be silently ignored if the overall security realm already has an older, non-zero revocation policy in place. This issue can allow previously issued tokens to remain valid for refreshing sessions and accessing user information even after an administrator has attempted to invalidate them.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

🎖@cveNotify

🚨 CVE-2026-18570
A flaw was found in the full-scope-disabled client-policy executor within the keycloak-services component. This component is responsible for enforcing security policies during client registration and configuration in Red Hat Build of Keycloak. The issue occurs because the executor only validates the fullScopeAllowed field when it is explicitly provided in a request. By omitting this field, a delegated user can bypass the policy, resulting in a client created with full scope access. This allows the client to obtain tokens with unauthorized role mappings.

🎖@cveNotify

🚨 CVE-2026-18571
A flaw was found in the user creation component of Keycloak when Fine-Grained Admin Permissions V2 (FGAP V2) is enabled. This issue allows a sub-administrator with permission to create users to add those users to any group, even groups the sub-administrator is not authorized to manage. This could lead to unauthorized access to sensitive information or elevated privileges for the newly created users.

🎖@cveNotify

🚨 CVE-2026-18572
Keycloak provides authorization services that allow administrators to restrict access to resources based on time policies (for example, only allowing access during business hours). A flaw was discovered where a user can include a fake time value in their authorization request that overrides the actual server time. This allows the user to bypass these time-based restrictions and access protected resources at unauthorized times.

🎖@cveNotify

🚨 CVE-2026-18573
A flaw was found in the keycloak-services component of Keycloak, which is used for managing authentication and authorization flows. The issue occurs when a realm administrator configures client policies to enforce specific authentication requirements on confidential clients. Due to improper evaluation of the client state during an update operation, an attacker with client management permissions can bypass these security policies by first creating a public client and then updating it to a confidential client with weaker authentication. This can result in the persistence of clients that do not comply with the intended security hardening of the realm.

🎖@cveNotify

🚨 CVE-2026-79652
A flaw was found in the JWT Bearer authorization grant implementation within the keycloak-services component of Red Hat Build of Keycloak. This component handles various OAuth2 and OpenID Connect grant types used for issuing access tokens. The issue occurs because the JWT Bearer grant fails to check if a client requires user consent before issuing a token. This allows an authenticated attacker with valid client credentials and a trusted identity provider assertion to bypass the consent requirement and obtain unauthorized access to a user account at a consent-gated client.

🎖@cveNotify

🚨 CVE-2026-17615
A flaw was found in RESTEasy's SourceProvider. This vulnerability allows an unauthenticated attacker to perform an unauthenticated remote file read. By sending a specially crafted XML body with a DOCTYPE declaration referencing external entities to an endpoint that accepts application/xml and returns Source or StreamSource, the server can be tricked into resolving the entity and including sensitive file contents in the HTTP response. This is due to the SourceProvider.writeTo() method creating a SAXParser without disabling external entity resolution, leading to an XML External Entity (XXE) vulnerability.

🎖@cveNotify

🚨 CVE-2026-19729
A flaw was found in the key provider component of the keycloak-services library, which is the core engine for the Red Hat Build of Keycloak. The issue occurs because a previous fix for path probing was incomplete, allowing a realm administrator to still submit arbitrary filesystem paths as keystore parameters. This can be used to determine the existence and readability of files on the server, potentially exposing sensitive system information.

🎖@cveNotify

🚨 CVE-2026-79970
Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Verification of Cryptographic Signature vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to protection mechanism bypass.

🎖@cveNotify

🚨 CVE-2026-88053
Tesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadIntTemplates in src/classify/intproto.cpp reads NumClassPruners, NumClasses, and NumProtoSets from the TESSDATA_INTTEMP component of a crafted .traineddata file and uses those values as loop bounds without validating them against MAX_NUM_CLASS_PRUNERS, MAX_NUM_CLASSES, and MAX_NUM_PROTO_SETS. The loops store heap pointers into fixed-capacity ClassPruners and ProtoSets arrays in INT_TEMPLATES_STRUCT and INT_CLASS_STRUCT, so an oversized count causes heap out-of-bounds pointer writes during legacy-classifier initialization before OCR begins, resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review.

🎖@cveNotify

🚨 CVE-2026-88054
Tesseract is an open source OCR engine. In version 5.5.3 and earlier, Plumbing::DeSerialize in src/lstm/plumbing.cpp rejects excessively large network stacks but accepts a zero-length stack for NT_SERIES, NT_PARALLEL, or NT_REVERSED layers in a crafted .traineddata model. During LSTMRecognizer initialization in src/lstm/lstmrecognizer.cpp, CacheXScaleFactor(XScaleFactor()) reaches Series::CacheXScaleFactor in src/lstm/series.cpp, which dereferences stack_[0] on the empty vector and invokes a virtual method through an invalid Network pointer. This causes a deterministic crash and denial of service at model load. No fixed release is available as of this review.

🎖@cveNotify

🚨 CVE-2026-89044
Netty versions 4.1.133.Final through 4.1.137.Final and 4.2.13.Final through 4.2.17.Final fail to properly validate the final transfer coding in the Transfer-Encoding header, allowing attackers to smuggle requests by using malformed encoding declarations. Attackers can split Transfer-Encoding headers across multiple lines or use values like 'chunked, xchunked' to bypass validation and decode messages as chunked when the final coding is not chunked, enabling request smuggling attacks.

🎖@cveNotify

🚨 CVE-2026-88032
A use-after-free in the reactive client-side encryption component of the MongoDB Java Driver can cause native resources to be freed while an affected encrypted operation is still using them when the operation is cancelled. A party able to cause such an operation to be cancelled may cause the hosting application process to terminate. Reaching the issue requires an affected reactive encryption configuration that retrieves KMS credentials on demand.

🎖@cveNotify

🚨 CVE-2026-90788
A security flaw has been discovered in magicblack MacCMS10 2026.1000.4055. Affected by this vulnerability is an unknown functionality of the file /admin1.php/admin/template/index/path/.%40template%40default%40html%40label.html of the component Template Handler. Performing a manipulation results in os command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-90941
novel-plus through 5.3.3 contains an authorization bypass vulnerability in the BookController download endpoint that allows authenticated backend accounts to export complete book text including paid chapters. Attackers can supply a bookId and bookName to retrieve all chapter content without VIP or purchase verification, bypassing the permission checks and data-scope limits enforced elsewhere in the admin interface.

🎖@cveNotify

🚨 CVE-2026-90949
A flaw was found in GIMP's PSP (Paint Shop Pro) file loader. When processing a compressed selection channel, a heap-based buffer overflow can occur due to a mismatch between the allocated buffer size and the amount of data decompressed. A remote attacker could exploit this vulnerability by crafting a malicious PSP file. Opening this file in GIMP could lead to a crash or arbitrary code execution.

🎖@cveNotify

🚨 CVE-2026-57120
PraisonAI is a multi-agent teams system. Prior to praisonaiagents 1.6.59, execute_code sandbox mode permits runtime assembly of blocklisted dunder names and allows str.format or str.format_map to resolve dotted fields through C-level attribute access that bypasses _safe_getattr. This exposes class, qualified-name, base-class, globals, and object-dictionary attributes to prompt-influenced code when approval is automatically granted, producing a high-impact read primitive without establishing a complete in-process execution chain. This issue is fixed in praisonaiagents 1.6.59.

🎖@cveNotify

🚨 CVE-2026-54541
Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to 1.6.0, a malicious state-sync peer can crash a syncing node by sending a crafted TrieChunk proof containing two TrieProofNode values with identical keys. TrieProof::verify calls TrieProofNode::child_index in primitives/src/trie/trie_proof_node.rs, where is_prefix_of accepts equal keys and KeyNibbles::get is called at the key length, returns None, and is unconditionally unwrapped. Untrusted ResponseChunk data reaches commit_chunks, put_chunk, and proof.verify before cryptographic proof validation, so the attacker does not need a valid proof. Exploitation requires the attacker to be selected as the victim's sync peer during state sync, and the resulting panic is transient because the node restarts and resynchronizes. This issue is fixed in version 1.6.0.

🎖@cveNotify

🚨 CVE-2026-55235
langgraph-api implements the LangGraph API for rapid development and testing. Prior to 0.10.0, langgraph-api permits a run or cron to specify a relative webhook target that is delivered through an in-process loopback transport, and the authentication middleware treats that transport as internal without applying the authentication context used for external requests. In deployments that rely on per-user authorization to separate threads and runs, an authenticated user can direct a webhook to the server's own thread and run routes, allowing creation of a run on or modification of another user's thread and limited incorporation of the targeted thread's metadata into the created run record. The affected path requires webhook targets and per-user authorization boundaries; deployments that deliberately re-enable loopback delivery should restrict it to controlled same-process routes because those webhooks remain unauthenticated. This issue is fixed in version 0.10.0.

🎖@cveNotify