🚨 CVE-2026-73435
On affected platforms running Arista EOS with Open Shortest Path First version 2 (OSPFv2) configured, a specially crafted OSPFv2 packet from an unauthenticated attacker on the same broadcast segment, with OSPFv2 authentication configured can cause adjacency flapping and packet loss. The disruption can affect routing across the broader OSPF domain.

🎖@cveNotify

🚨 CVE-2026-73436
On affected platforms running Arista EOS with OSPFv2 and OSPFv2 segment routing configured, a specially crafted OSPFv2 packet from an adjacent OSPF neighbor may cause OSPF to restart unexpectedly.

🎖@cveNotify

🚨 CVE-2026-73440
On affected platforms running Arista EOS with Simple Network Management Protocol (SNMP) configured, SNMPv3 local or remote user credentials may be exposed as a one-way hashed, localized key value within the device's running and sanitized configurations. An authenticated user who gains access to this sensitive information could leverage it to perform unauthorized read operations on SNMP tables or to send fraudulent trap notifications to the Network Management System (NMS).

This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks.

🎖@cveNotify

🚨 CVE-2026-73453
An unauthenticated P4Runtime (Programming Protocol-Independent Packet Processors Runtime) client can achieve arbitrary code execution under certain conditions on affected platforms running Arista EOS configured with P4Runtime. P4Runtime is disabled by default in Arista EOS. By crafting a malicious packet during the initiation of a P4Runtime session, an attacker can obtain complete administrative control over the compromised switch.

This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks.

🎖@cveNotify

🚨 CVE-2026-73469
When specific platforms are using Arista EOS with a loose Unicast Reverse Path Forwarding (uRPF) configuration, certain traffic may not be subjected to the intended verification drop. Consequently, traffic that should be dropped based on these routes could still be processed and forwarded by the device.

This issue was discovered internally by Arista and the company is not aware of any malicious uses of this issue in customer networks.

🎖@cveNotify

🚨 CVE-2026-79993
The `deleteContainer` opcode (0x14/20) is processed without verifying the caller's ACL permissions, allowing any authenticated client to delete specific znodes in the data tree regardless of the ACL restrictions on the znode or its parent. This opcode is considered internal-only and the official client doesn't have API for it, but a client that can open a plain TCP session on the ZooKeeper client port (2181 by default) - with NO authentication and NO ACL permissions - can delete any empty persistent znode (including regular persistent nodes, container nodes, and TTL nodes) by issuing the raw protocol OpCode deleteContainer (20). The deleteContainer request path completely skips both the session check and the DELETE ACL check that are enforced by the regular delete (OpCode 2) path. This is an authorization bypass / ACL enforcement bug.

This issue affects Apache ZooKeeper: from 3.9.0 through 3.9.5, from 3.8.0 through 3.8.6.

Users are recommended to upgrade to version 3.9.6 or 3.8.7, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-84439
When audit logging is enabled (zookeeper.audit.enable=true), an unauthenticated attacker can inject arbitrary fields into Apache ZooKeeper's audit log by sending a digest authentication request with tab characters (\t) embedded in the username. Because the audit log uses tab-separated key=value format, the injected tabs are parsed as legitimate field separators, allowing the attacker to spoof audit results (e.g., injecting result=success), forge operation types, and corrupt forensic evidence.

A log injection vulnerability in Apache ZooKeeper allows a client that can call setACL to inject forged key-value fields into zookeeper_audit.log. When audit logging is enabled, the server serializes attacker-controlled digest ACL ids into the acl= audit field without escaping tab characters. Because audit events are emitted as tab-separated key=value records, a crafted ACL id can make one successful setAcl event appear to contain forged fields such as operation=delete and znode=/forged. This undermines the integrity of downstream audit parsing, alerting, and incident response.

This issue affects Apache ZooKeeper: from 3.9.0 through 3.9.5, from 3.8.0 through 3.8.6.

Users are recommended to upgrade to version 3.9.6 or 3.8.7, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-84501
An unauthenticated attacker can inject arbitrary fake log lines into Apache ZooKeeper's operational log by sending a crafted add_auth("ensemble", ...) request containing newline characters (\n). When the ensemble name doesn't match, EnsembleAuthenticationProvider.handleAuthentication() logs the raw, unsanitized name via LOG.warn(). Because SLF4J's {} placeholder preserves embedded newlines, the attacker can forge complete log entries — with arbitrary timestamps, log levels, class names, and messages — that are visually indistinguishable from genuine ZooKeeper log output.

This issue affects Apache ZooKeeper: from 3.9.0 through 3.9.5, from 3.8.0 through 3.8.6.

Users are recommended to upgrade to version 3.8.7 or 3.9.6, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-14916
A JWT signature verification vulnerability affects Kong components that perform JWT validation for MCP OAuth2 or DataKit integrations inside Kong API Gateway Enterprise. The affected code does not properly validate that the JWT signing algorithm is compatible with the type of key used for verification.



As a result, an unauthenticated remote attacker may be able to craft a forged JWT that is incorrectly accepted as valid, leading to authentication bypass and potential compromise of confidentiality, integrity, and availability.

🎖@cveNotify

🚨 CVE-2026-86106
An unauthenticated actor with network access to the private HA interconnect may trigger sensitive HA peer functions without verification. This could result in elevated command execution on Edge units where HA is enabled.

🎖@cveNotify

🚨 CVE-2026-86107
The VeloCloud Edge and Gateway exhibit an out-of-bounds write vulnerability when processing tunneled IP fragments between authenticated overlay neighbors. This vulnerability impacts the VeloCloud VCMP tunnel protocol only.

A successful exploit can cause the affected process to terminate and restart, leading to a temporary disruption of traffic. Hosts on the internet that are unauthenticated and unable to form an overlay peer relationship can not trigger the vulnerable logic.

🎖@cveNotify

🚨 CVE-2026-86585
The lack of signature verification of firmware update packages in VEO and VEO-XS Wi-Fi monitors, in versions prior to 01.48.001, allows an attacker who controls the delivery of an update to install unauthorised firmware.

🎖@cveNotify

🚨 CVE-2026-89794
In the Linux kernel, the following vulnerability has been resolved:

ksmbd: zero pipe read compound padding

Compound response handling extends the last response iov to an eight-byte
boundary.

smb2_read_pipe() allocates only the payload size, so the alignment padding
can expose up to seven bytes of uninitialized kernel heap memory.

Allocate the aligned size and clear the unused tail before pinning the
response buffer.

🎖@cveNotify

🚨 CVE-2026-89795
In the Linux kernel, the following vulnerability has been resolved:

PCI: Allow per function PCI slots to fix slot reset on s390

On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.

Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.

When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().

Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES.

🎖@cveNotify

🚨 CVE-2026-89796
In the Linux kernel, the following vulnerability has been resolved:

mm/damon/core: avoid infinite kdamond_merge_regions() internal loop

Patch series "mm/damon: unurgent fixes for infinite loop, NULL de-ref and
races", v1.1.

Sashiko found a few issues in DAMON that could cause infinite loop, NULL
dereference and monitoring results degradation. The first two sounds
scary but the infinite loop happens only under unreasonable user setup.
The NULL dereference is only in a unit test. Monitoring results
degradation is trivial since it is only best-effort, and those happens
from only unlikely races. Still those are bugs that better to fix if
possible. Fix those.


This patch (of 6):

Due to online parameter update like events, the number of DAMON regions
could be higher than the user-set upper limit. kdamond_merge_regions()
repeats merge regions until the number meets the limit, while doubling the
merge threshold up to the theoretical maximum threshold. It is tried only
up to the theoretical maximum threshold because even the aggressive
merging can fail from reducing the number of regions under the
user-defined upper limit. For example, there could be many user-defined
non-contiguous regions that cannot be merged.

The threshold based loop break condition is evaluated by comparing the
threshold for the next merging try against the theoretical maximum
threshold. If max_thres is larger than UINT_MAX / 2, doubling the
threshold could make it overflow, and bypass the loop break condition. In
the case, if the number of regions cannot be reduced under the upper limit
like explained above, the loop will run infinitely.

Prevent the case by doing the break condition check before doubling the
threshold. Also, prevent the threshold exceeding the maximum threshold,
as it could overflow and apply the wrong merge threshold.

This issue is unlikely to occur in real world, since having the max_thres
higher than UINT_MAX / 2 require unrealistically large aggregation
intervals compared to the sampling interval. Also, it requires an
unrealistically large number of uncontiguous regions setup. Nonetheless,
the consequence is bad and the fix is simple.

The issue was discovered [1] by Sashiko.

🎖@cveNotify

🚨 CVE-2026-89797
In the Linux kernel, the following vulnerability has been resolved:

power: supply: ab8500_fg: fix use-after-free on remove

ab8500_fg_remove() destroys the driver workqueue while the threaded
interrupt handlers are still armed; they are devm-managed and freed
only after ->remove() returns, so a handler that fires in that
window queues work on the freed workqueue.

Tear the workqueue down through devm instead, registering its cleanup
after the power supply and before the interrupt requests. devm then
frees the interrupts first, so the handlers can no longer queue work,
before disabling the delayed and plain work items and destroying the
workqueue. Disabling the items, rather than cancelling them, keeps
them disabled so no producer (including the power-supply
external_power_changed callback) can requeue them.

Found by an in-house static analysis tool.

🎖@cveNotify

🚨 CVE-2026-89798
In the Linux kernel, the following vulnerability has been resolved:

rpcrdma: arm rn_done before publishing the notification

rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before
storing the caller's callback in rn->rn_done. The xarray makes @rn
reachable to rpcrdma_remove_one(), which walks rd_xa and invokes
rn->rn_done(rn) for every registered notification. A device removal
that races a fresh registration can therefore observe @rn with
rn_done still NULL, because the notification objects are zero
allocated by their owners, and call through a NULL function pointer.

Store rn->rn_done before xa_alloc() publishes @rn. The xarray's
store-side and load-side ordering then guarantees that any CPU which
finds @rn in rd_xa also observes the armed callback.

rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel
for a completed registration, so the early store must not survive a
failed registration. Clear rn_done again when xa_alloc() fails.
Were it left set, the failed-accept cleanup path would call
rpcrdma_rn_unregister() on an @rn that was never inserted, erasing
an unrelated rd_xa slot and underflowing rd_kref.

🎖@cveNotify

🚨 CVE-2026-89799
In the Linux kernel, the following vulnerability has been resolved:

bpf: Disable preemption in bpf_get_stackid

The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.

Note the bpf_get_stackid_pe function is executed already with
preemption disabled.

🎖@cveNotify

🚨 CVE-2026-89800
In the Linux kernel, the following vulnerability has been resolved:

drm/nouveau/uvmm: clear the dirty flag when unwinding an OP_UNMAP_SPARSE

A successful OP_UNMAP_SPARSE marks its region dirty with
nouveau_uvma_region_dirty() and defers the teardown to
nouveau_uvmm_bind_job_cleanup(); it does not remove the region from
uvmm->region_mt.

If a later op in the job fails, the unwind path never clears reg->dirty
(set in one place, cleared nowhere) and sets op->reg = NULL, so cleanup
skips the teardown. The region is left in the tree with dirty set and its
completion never signalled. Later binds over that range then fail
permanently -- -ENOENT or -EINVAL from the dirty checks, or an unkillable
wait_for_completion() in bind_validate_region() -- for the lifetime of
the uvmm.

Clear reg->dirty when the unwind reverts the sparse unmap, restoring the
region to the state it was found in.

🎖@cveNotify

🚨 CVE-2026-89801
In the Linux kernel, the following vulnerability has been resolved:

drm/nouveau/uvmm: fix premature region free on failed OP_UNMAP_SPARSE

In nouveau_uvmm_bind_job_submit()'s OP_UNMAP_SPARSE arm, op->reg is set
from nouveau_uvma_region_find(), which only looks the region up and takes
no reference; a region's sole reference is its membership in
uvmm->region_mt. Two failure paths leave op->reg set: the -ENOENT check
when the region is busy, and the drm_gpuvm_sm_unmap_ops_create() failure.
The sibling nouveau_uvmm_sm_unmap_prepare() failure just below clears
op->reg; these two do not.

unwind_continue steps back one op, so the failing op is skipped by the
unwind loop and its op->reg stays set. nouveau_uvmm_bind_job_cleanup()
then enters its if (op->reg) branch and calls nouveau_uvma_region_remove()
and nouveau_uvma_region_put() on it, dropping the tree's sole reference
and freeing a region this job never created. The comment above the
cleanup loop documents the broken invariant: op->reg must be NULL on
submit failure.

This frees a live region on an unrelated failure, reachable single-job
when drm_gpuvm_sm_unmap_ops_create() returns -ENOMEM; if another job owns
the same region, its cleanup then removes and puts the freed region, a
use-after-free. Clear op->reg on both failure paths.

🎖@cveNotify

🚨 CVE-2026-89802
In the Linux kernel, the following vulnerability has been resolved:

drm/nouveau/uvmm: fix NULL deref unwinding an OP_MAP_SPARSE op

Each bind_job_op is zeroed by kzalloc_obj() in bind_job_op_from_uop(),
and the OP_MAP_SPARSE case in nouveau_uvmm_bind_job_submit() only creates
a region, so op->ops stays NULL for a successfully processed sparse map.

If a later op in the same job fails, the reverse unwind loop revisits that
op and calls drm_gpuva_ops_free(&uvmm->base, op->ops) unconditionally.
drm_gpuva_ops_free() dereferences its argument right away
(list_for_each_entry_safe on &ops->list), so a NULL op->ops oopses. The
path is reachable by any render-node fd holder, since NOUVEAU_VM_BIND is
DRM_RENDER_ALLOW.

Guard the free with IS_ERR_OR_NULL(), as nouveau_uvmm_bind_job_cleanup()
already does for the identical free.

🎖@cveNotify