🚨 CVE-2026-62682
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, an unescaped backtick in servers[0].url is emitted into request URL template literals generated when output.baseUrl.getBaseUrlFromSpecification is enabled without safe encoding. This permits attacker-controlled JavaScript to be evaluated when a generated request or URL-builder function is called, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/core/src/getters/route.ts function getFullRoute. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-63117
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, an authenticated RDP client can advertise DVI ADPCM with nBlockAlign equal to 8 and nChannels equal to 2 to make the `bs` calculation in rdpsnd_server_select_format in channels/rdpsnd/server/rdpsnd_main.c equal zero. The subsequent out_frames modulo `bs` operation raises SIGFPE and terminates the server-side rdpsnd channel process. This vulnerability fixed in 3.28.0.

🎖@cveNotify

🚨 CVE-2026-63633
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, freerdp_dsp_decode_opus in libfreerdp/codec/dsp.c calls Stream_EnsureRemainingCapacity on context->common.buffer even though opus_decode writes decoded PCM into the caller-supplied out stream. A malicious RDP server that negotiates WAVE_FORMAT_OPUS with a client built with WITH_OPUS enabled and WITH_DSP_FFMPEG disabled can make libopus write a large decoded frame beyond the 4096-byte StreamPool_Take destination used by channels/rdpsnd/client/rdpsnd_main.c. This can corrupt the client heap, crash the client, and may permit code execution. This issue is fixed in version 3.28.0.

🎖@cveNotify

🚨 CVE-2026-63652
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, rdpsnd_server_recv_formats in channels/rdpsnd/server/rdpsnd_main.c frees context->client_formats on a malformed Client Audio Formats PDU without clearing the owning pointer or num_client_formats. An authenticated RDP client can trigger an error such as a cbSize larger than the remaining record, leave the dangling pointer in the server context, and cause rdpsnd_server_context_free to free the same allocation again at session teardown. This reliably terminates the server and can create allocator-dependent heap corruption. This issue is fixed in version 3.28.0.

🎖@cveNotify

🚨 CVE-2026-71864
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a double quote in a header parameter name is emitted into the generated request-validation zod.object({...}) schema without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts and header request-validation generation. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-71865
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a double quote in a query parameter name is emitted into the generated request-validation zod.object({...}) schema without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts and query request-validation generation. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-71866
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. From version 8.19.0 until 8.21.0, a double quote in a schema property name is emitted into the generated zod.object({...}) schema without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts and zod object-key generation. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-71868
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a ${...} expression or backtick in an enum default is emitted into a module-level template literal emitted by zod schema generation without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts function formatDefaultValue. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-71869
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a ${...} expression or backtick in an array item default is emitted into a module-level template literal emitted by zod schema generation without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts function formatDefaultValue. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-71871
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a ${...} expression or backtick in a header parameter default is emitted into a module-level template literal emitted by zod schema generation without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts function formatDefaultValue. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-72716
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a ${...} expression or backtick in a query parameter default is emitted into a module-level template literal emitted by zod schema generation without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts function formatDefaultValue. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-72717
Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a ${...} expression or backtick in a schema default is emitted into a module-level template literal emitted by zod schema generation without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts function formatDefaultValue. This issue is fixed in version 8.21.0.

🎖@cveNotify

🚨 CVE-2026-49870
Snipe-IT is an IT asset/license management system. Prior to 8.6.1, POST /two-factor has no rate limiting, lockout, or attempt counter, allowing an attacker with valid credentials to submit unlimited TOTP guesses against the three accepted codes created by config/google2fa.php window=1. A successful guess creates a fully authenticated session. When two_factor_enabled is 1, POST /account/profile with two_factor_optin=0 can disable two-factor authentication without OTP reverification, while required mode 2 prevents that opt-out. An administrator can also use POST /api/v1/users/two_factor_reset to clear another user's secret. This issue is fixed in version 8.6.1.

🎖@cveNotify

🚨 CVE-2026-49976
Snipe-IT is an IT asset/license management system. Prior to 8.6.1, a user with the import permission can use CSV update mode to overwrite the email address of a non-admin user and then request a password reset to take over that account. app/Importer/UserImporter.php applies the canEditAuthFields gate by unsetting username, email, password, and activated on the model, but app/Importer/ItemImporter.php sanitizeItemForUpdating() rebuilds the update array from the raw CSV row in $this->item, restoring the unauthorized values. The app/Http/Controllers/ImportController.php import path checks import permission but does not require users.edit. This issue is fixed in version 8.6.1.

🎖@cveNotify

🚨 CVE-2026-50550
Snipe-IT is an IT asset/license management system. Prior to 8.5.0, a user who can edit other users can reset a superadmin's two-factor authentication through app/Http/Controllers/Api/UsersController.php postTwoFactorReset(). The endpoint authorizes update access but does not enforce canEditAuthFields before clearing two_factor_secret and two_factor_enrolled. This issue is fixed in version 8.5.0.

🎖@cveNotify

🚨 CVE-2026-55482
Snipe-IT is an IT asset/license management system. Prior to 8.4.1, a non-superadmin can use app/Http/Controllers/Assets/BulkAssetsController.php update() to submit company_id directly without Company::getIdForCurrentUser(), allowing assets to be moved across company boundaries and breaking multi-tenant isolation. This issue is fixed in version 8.4.1.

🎖@cveNotify

🚨 CVE-2026-55483
Snipe-IT is an IT asset/license management system. Prior to 8.6.0, an authenticated user with users.create permission can submit the admin permission while creating a user because store() in app/Http/Controllers/Users/UsersController.php strips superuser permission but does not strip admin permission. The created account can obtain administrative privileges. This issue is fixed in version 8.6.0.

🎖@cveNotify

🚨 CVE-2026-55519
Snipe-IT is an IT asset/license management system. Prior to 8.4.1, an authenticated user with generic asset edit permission can delete files attached to assets outside the user's ownership or company assignment. The destroy() methods in app/Http/Controllers/Api/UploadedFilesController.php and app/Http/Controllers/UploadedFilesController.php authorize update against the object class instead of the resolved object instance, creating an insecure direct object reference. This issue is fixed in version 8.4.1.

🎖@cveNotify

🚨 CVE-2026-55643
Snipe-IT is an IT asset/license management system. Prior to 8.6.3, a company-scoped user in FMCS floater mode can access users whose company_id is null because broad API queries and bulk web actions do not consistently apply isCurrentUserHasAccess. The /api/v1/users and /api/v1/users/{id}/licenses endpoints can expose personal data and assigned licenses, /users/bulkeditsave can modify out-of-scope profiles, and /users/merge can soft-delete users and transfer assigned assets. This issue is fixed in version 8.6.3.

🎖@cveNotify

🚨 CVE-2026-55694
Snipe-IT is an IT asset/license management system. Prior to 8.6.3, a restricted user can request /api/v1/users/{target_id}/eulas to obtain another user's randomized EULA filename and then download the signed file through /account/stored-eula-file/{filename}. The primary /stored-eula-file/{filename} route correctly denies access, but app/Http/Controllers/ProfileController.php and app/Http/Controllers/Api/UsersController.php do not consistently enforce ownership and target-user authorization. This issue is fixed in version 8.6.3.

🎖@cveNotify

🚨 CVE-2026-55703
Snipe-IT is an IT asset/license management system. Prior to 8.6.3, any activated account can request /maintenances/{id} and read maintenance records for assets in the same company without asset or maintenance permission. app/Http/Controllers/MaintenancesController.php show() renders the record without authorize(), while company-scoped route-model binding only prevents access to other companies. Disclosed fields include asset tags, suppliers, purchase costs, notes, and dates. This issue is fixed in version 8.6.3.

🎖@cveNotify