🚨 CVE-2026-62289
libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.0 and earlier, a crafted HEIF or AVIF file containing a clean aperture box can reduce an image dimension to zero and crash or corrupt tiling results when heif_image_handle_get_image_tiling(handle, 1, &tiling) is called. ImageItem::get_heif_image_tiling() returns already transformed dimensions, and process_image_transformations_on_tiling() applies the clean aperture transformation again. The second application passes zero to Box_clap::left_rounded(0), where image_width minus one underflows and constructs Fraction(0xFFFFFFFF, 2). Debug builds reach an assertion and abort, while release builds can return a corrupt crop and zero-width tiling result. The affected implementation spans libheif/image-items/image_item.cc, libheif/context.cc, and libheif/box.cc. This issue is fixed in version 1.23.1.

🎖@cveNotify

🚨 CVE-2026-62291
libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.0 and earlier, a crafted image sequence with a 2x2 primary plane and a 256x256 auxiliary alpha plane can cause attacker-controlled heap corruption during a normal decode and re-encode workflow. Track_Visual::decode_next_image_sample() calls transfer_channel_from_image_as() without checking that the auxiliary alpha dimensions match the main frame. The resulting inconsistent image reaches heif_track_decode_next_image() and then heif_context_encode_image(). In unc_encoder::encode(), unc_encoder_component_interleave::encode_tile() sizes its buffer with compute_tile_data_size_bytes() using the primary dimensions but copies each component using its actual plane dimensions. The oversized alpha plane is therefore copied beyond the allocation, causing an out-of-bounds write; the inverse size mismatch can also produce an out-of-bounds read. This issue is fixed in version 1.23.1.

🎖@cveNotify

🚨 CVE-2026-62292
libheif is a HEIF and AVIF file format decoder and encoder. From 1.19.0 until 1.23.1, a crafted uncompressed HEIF image using generic zlib unci full-item compression can crash an application that decodes an advertised tile with heif_image_handle_decode_image_tile(). In libheif/codecs/uncompressed/unc_decoder.cc, unc_decoder::fetch_tile_data() computes a large tile offset and unc_decoder::get_compressed_image_data_uncompressed() validates it with range_start_offset plus range_size. For the last advertised tile (4095, 4095), the addition can wrap to zero, bypass the bounds check, and pass an invalid source pointer and a one-terabyte length to memcpy. The observed result is an out-of-bounds read and process crash; opening the file alone does not trigger the issue because tile decoding is required. This issue is fixed in version 1.23.1.

🎖@cveNotify

🚨 CVE-2026-62377
libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.0 and earlier, a crafted HEIF sequence accepted by heif_context_read_from_memory() can leave the context with no registered sequence tracks and crash when heif_context_get_track(ctx, 0) is called. HeifContext::get_track() in libheif/context.cc executes assert(has_sequence()) before its normal error handling, so assert-enabled builds abort instead of allowing the public wrapper in libheif/api/libheif/heif_sequences.cc to return null. In release builds, removing the assertion lets the track_id zero path dereference m_tracks.begin()->second on an empty map, which is undefined behavior and typically crashes. The issue is reachable through documented public APIs after parsing attacker-controlled bytes. This issue is fixed in version 1.23.1.

🎖@cveNotify

🚨 CVE-2026-73973
Linuxfabrik Monitoring Plugins provides monitoring plugins for Icinga, Nagios, and related systems. Prior to version 7.0.0, check-plugins/logfile/logfile accepted a free-form --filename path and opened it as root when invoked through the shipped nagios or icinga sudoers allowlist, without confining the resolved path to /var/log. An attacker who controls the monitoring account can select a root-readable file such as /etc/shadow and use --warning-regex . while leaving SUPPRESS_OUTPUT false, causing each nonempty line to be collected in warn_matches and returned through lib.base.oao(). The vulnerable flow passes the expanded scan_path directly to open(), and neither real-path containment nor an allowlist protects the sink. The same fix also confines mysql-logfile and openvpn-client-list paths, allows only documented log roots, and resolves symlinks and parent-directory traversal before checking containment. This issue is fixed in version 7.0.0.

🎖@cveNotify

🚨 CVE-2026-73974
linuxfabrik-lib provides Python modules for database access, caching, shell execution, and API integrations, and Linuxfabrik Monitoring Plugins uses its shared testing helper across check plugins. Prior to linuxfabrik-lib 6.1.0 and Linuxfabrik Monitoring Plugins 7.0.0, lib.lftest.test() treated the first or second element of a --test CSV argument as a filesystem path and returned the file contents as simulated standard output or standard error without path confinement. The hidden but production-accessible --test argument was accepted by sudo-authorized plugins, so an attacker controlling the nagios or icinga account could use check-plugins/deb-updates/deb-updates with its default QUERY=1 to disclose every line of a root-readable file. Approximately 22 other plugins exposed filtered content or a root file existence and readability oracle through the same helper, while check-plugins/network-bonding/network-bonding and check-plugins/openstack-swift-stat/openstack-swift-stat had direct read paths that bypassed the helper. The library fix confines fixture reads to the invoking plugin's unit-test directory and refuses unsafe anchors, and the plugin fix routes the two bypasses through that helper. These issues are fixed in linuxfabrik-lib 6.1.0 and Linuxfabrik Monitoring Plugins 7.0.0.

🎖@cveNotify

🚨 CVE-2026-44829
Gotenberg is a Docker-powered stateless API for PDF files. In 8.32.0 and earlier, filename handling in pkg/modules/api/context.go uses filepath.Base on Linux, which does not treat backslashes as path separators, so a multipart filename containing Windows-style parent directory components survives sanitization. The original filename flows through ctx.diskToOriginal and the multi-output PDF routes into archives.FilesFromDisk and archives.Zip.Archive as the generated zip entry name. A remote attacker can submit a name such as ........\Windows\System32\evil.pdf through an upload or an upstream downloadFrom Content-Disposition header, and a Windows archive extractor can write the resulting file outside the intended extraction directory. The affected paths include /forms/pdfengines/split and other multi-output PDF, LibreOffice, and conversion routes, and exploitation can cause arbitrary file writes on a downstream Windows system when a user or process extracts the returned archive. This issue is fixed in version 8.33.0.

🎖@cveNotify

🚨 CVE-2026-45272
MyBooks is an enhanced and easy-to-use personal ebook management web server also known as Talebook. In 3.41.2 and earlier, the AdminSettings.post handler in webserver/handlers/admin.py accepts SOCIAL_AUTH key names without validating quotes or newline characters, and SettingsLoader.dumpfile in webserver/loader.py concatenates those names into the generated Python source file auto.py without escaping them. An administrator can submit a crafted SOCIAL_AUTH key name that closes the settings dictionary and injects arbitrary Python statements. The application later executes those statements because SettingsLoader.loadfile imports auto.py as a module, and setting autoreload to true invokes restart_async so a process supervisor restarts the service and triggers the import. Successful exploitation executes commands with the privileges of the application service account and can disclose data, modify files, establish persistence, or disrupt the service. Related authorization and registration vulnerabilities can reduce the effective privilege requirement in a chained attack, but the standalone vulnerability requires administrator access. This issue is fixed in version 3.42.0.

🎖@cveNotify

🚨 CVE-2026-45273
MyBooks is an ebook management web server also known as Talebook. In 3.41.2 and earlier, the AdminSettings.post handler for POST /api/admin/settings in webserver/handlers/admin.py applies the auth decorator but does not check the self.admin_user property, unlike the corresponding GET handler. Any authenticated regular user can therefore overwrite server configuration values including SMTP credentials, OAuth client secrets, storage paths, security feature flags, and autoreload settings. The process_auth_header function in webserver/handlers/base.py also fails to verify the matched account's active flag, allowing a registered but unactivated account to authenticate and reach the vulnerable handler. Exploitation can disclose secrets through configuration access paths, sabotage application behavior, force service restarts, and supply the settings needed for related code-injection attacks. This issue is fixed in version 3.42.0.

🎖@cveNotify

🚨 CVE-2026-45274
MyBooks is anebook management web server also known as Talebook. In 3.41.2 and earlier, the SignUp.post handler for POST /api/user/sign_up in webserver/handlers/user.py does not enforce the ALLOW_REGISTER configuration flag, even though the frontend hides registration controls when the flag is false. An unauthenticated remote attacker can call the endpoint directly and create a valid account on an instance whose administrator disabled public registration. The process_auth_header function in webserver/handlers/base.py also does not verify the account's active flag, so the newly created and unactivated account can authenticate immediately and access user-level API functionality. The bypass defeats the intended account-creation policy and can supply the low-privilege account required by related authorization vulnerabilities. This issue is fixed in version 3.42.0.

🎖@cveNotify

🚨 CVE-2026-45741
Gotenberg is a Docker-powered stateless API for PDF files. In 8.32.0 and earlier, the IsPublicIP function in pkg/gotenberg/outbound.go does not reject the 2002::/16 6to4 prefix, the 64:ff9b::/96 and 64:ff9b:1::/48 NAT64 prefixes, the fec0::/10 deprecated site-local prefix, Teredo, and other transition prefixes that can embed or route to non-public IPv4 destinations. The addr.Unmap operation only handles IPv4-mapped IPv6 addresses, so a crafted DNS AAAA record can cause the outbound HTTP client to treat an address wrapping an internal destination such as 169.254.169.254 as public. An unauthenticated attacker can use a conversion route with WithDenyPrivateIPs enabled to reach cloud metadata services, and the Chromium URL conversion route can return the internal response as a PDF, potentially exposing cloud credentials. Exploitation requires a deployment whose host routes the relevant IPv6 prefix, such as a dual-stack or NAT64-enabled environment. This issue is fixed in version 8.33.0.

🎖@cveNotify

🚨 CVE-2026-45742
Gotenberg is a Docker-powered stateless API for PDF files. From 8.10.0 until 8.33.0, the newContext function in pkg/modules/api/context.go starts one errgroup.Go goroutine for each multipart downloadFrom entry and allows those goroutines to concurrently write to the shared ctx.files, ctx.diskToOriginal, and ctx.filesByField maps and slices. Go maps and slices are not safe for concurrent mutation, so a crafted multipart request containing many downloadFrom entries can trigger a data race and terminate the process with a fatal concurrent map writes runtime error. The default configuration enables downloadFrom and disables authentication, allowing an unauthenticated remote attacker to crash an exposed conversion service and cause a denial of service. This issue is fixed in version 8.33.0.

🎖@cveNotify

🚨 CVE-2026-47187
SSHFS is a network filesystem client for connecting to SSH servers. Prior to version 3.7.6, a rogue SFTP server can return absolute symlink targets or relative targets containing parent-directory components that SSHFS passes through FUSE for resolution by the client kernel against the local filesystem. The documented transform_symlinks mitigation does not contain relative targets because transform_symlink() returns early at sshfs.c:2181, while sshfs_readlink() at sshfs.c:2234 to sshfs.c:2236 otherwise copies the server-supplied link target to the kernel. A victim or victim-side tool that follows such a link through ordinary operations such as cp, rsync, backup tooling, or an editor can disclose readable local files back to the server or write server-controlled content to writable local files, potentially including startup or scheduled-task files. This issue is fixed in version 3.7.6.

🎖@cveNotify

🚨 CVE-2026-48711
SSHFS is a network filesystem client for connecting to SSH servers. From version 1.4 until 3.7.6, SSHFS accepts a bracketed mount source such as [-oProxyCommand=CMD]:/path and find_base_path() removes the brackets, leaving a host value that begins with - and is passed directly to ssh as a command-line argument. When a caller also supplies a path-valued sftp_server, ssh treats the normalized host as an option and the server path as its destination, causing an injected ProxyCommand to execute locally before any connection or authentication succeeds. The attack requires a caller or wrapper that passes an attacker-controlled mount source to SSHFS with the required sftp_server configuration and results in arbitrary command execution as the user running SSHFS. This issue is fixed in version 3.7.6.

🎖@cveNotify

🚨 CVE-2026-49253
electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.11.11, electerm uses remote-supplied filenames directly with path.join() while receiving Zmodem and Trzsz transfers. In src/app/server/zmodem.js, prepareReceiveFile() joins the filename to the user-selected save path, and in src/app/server/trzsz.js, getUniqueFilePath(), the openSaveFile() callback, and the savedFilePaths mapping construct destinations without sanitization. A malicious SSH server or remote shell can provide a filename containing traversal components such as ../escaped.txt or ../../.bashrc. When the victim accepts the transfer and selects a download directory, electerm can write outside that directory and overwrite files accessible to the desktop user, potentially changing sensitive configuration or impairing availability. This issue is fixed in version 3.11.11.

🎖@cveNotify

🚨 CVE-2026-49255
electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.11.11, electerm constructs operating system commands in src/app/lib/fs.js by interpolating untrusted file paths into the rmrf(), mv(), and cp() functions. A malicious SSH or SFTP server can provide a filename containing quote characters and shell metacharacters, and a victim can cause that filename to reach the affected operation during remote-to-local transfer, conflict renaming, copying, moving, or removal. The generated `rm -rf`, mv, `cp -r`, PowerShell Remove-Item, Move-Item, or Copy-Item command can then interpret the filename as shell syntax. This allows arbitrary command execution with the electerm desktop user's privileges on POSIX and Windows systems, enabling data exfiltration, file modification, malware installation, or denial of service. This issue is fixed in version 3.11.11.

🎖@cveNotify

🚨 CVE-2026-44252
Wazuh is a free and open source platform used for threat prevention, detection, and response. From 4.0.0 until 4.14.5, Wazuh Manager allows a low-privilege read-only API user with manager:read permission to retrieve the cluster key from the element in ossec.conf through GET /manager/configuration?raw=true. An attacker with network access to TCP port 1516 can use the disclosed Fernet key to impersonate a cluster worker and submit distributed API requests containing attacker-controlled rbac_permissions with rbac_mode set to black. Because the master trusts the worker-supplied authorization context, the attacker can create users, assign administrator roles, access credentials and API tokens, modify configuration, and execute actions across agents. This issue is fixed in version 4.14.5.

🎖@cveNotify

🚨 CVE-2026-44253
Wazuh is a free and open source platform used for threat prevention, detection, and response. From 3.9.0 until 4.14.5 and 5.0.0-beta2, the Wazuh cluster protocol in framework/wazuh/core/cluster/common.py allows an authenticated cluster node to exhaust memory on the master. The receive_str() method accepts an attacker-controlled total for InBuffer without a maximum, so a new_str command can request a multi-gigabyte bytearray and repeated requests accumulate in in_str. The divided-message path also retains flag_divided fragments under unique counters in div_msg_box without a count, aggregate-size, or expiration limit. Exploitation can disrupt agent connectivity and alert processing across the monitored environment. This issue is fixed in versions 4.14.5 and 5.0.0-beta2.

🎖@cveNotify

🚨 CVE-2026-44254
Wazuh is a free and open source platform used for threat prevention, detection, and response. From 1.0.0 until 4.14.6 and 5.0.0-beta2, HandleSecureMessage() in src/remoted/secure.c passes a pointer inside its stack buffer to ReadSecMSG(), and src/os_crypto/shared/msgs.c decompresses up to OS_MAXSTR bytes at that offset. For an encrypted agent message on TCP port 1514 that expands to 65,536 bytes, os_zlib_uncompress() writes a terminating null byte beyond the end of the destination buffer. The resulting stack out-of-bounds write in the root-level remoted daemon can crash message processing and disrupt agent communications. This issue is fixed in versions 4.14.6 and 5.0.0-beta2.

🎖@cveNotify

🚨 CVE-2026-53654
Grav is a file-based Web platform. Prior to 3.8.5, the Login plugin twofa_cancel task accepts a client-controlled _redirect field without a nonce and allows an unauthenticated request to set an external http, https, or protocol-relative Location target. Controller::execute() applies the field when taskTwofa_cancel() sets no redirect, and Grav::getRedirectResponse() accepts the target through Uri::isExternal(), enabling phishing redirects from a trusted Grav host. This issue is fixed in version 3.8.5.

🎖@cveNotify

🚨 CVE-2026-61607
Grav API Plugin is a RESTful API for Grav CMS that provides full headless access to your site's content. Prior to 1.0.2, the Grav API plugin POST /api/v1/media pipeline in HandlesMediaUploads::processUploadedFile() validates an SVG filename extension but does not invoke Security::sanitizeSVG(). An attacker with api.media.write permission can store an SVG containing JavaScript, and the server returns the file as Content-Type: image/svg+xml so the script executes when a victim opens it, allowing session data theft and authenticated actions. This issue is fixed in version 1.0.2.

🎖@cveNotify