🚨 CVE-2026-73212
Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.13.1, good_peer_addr() in src/server/ns_turn_server.c uses ioa_addr_in_range() in src/client/ns_turn_ioaddr.c without canonicalizing IPv4-compatible, 6to4, and 64:ff9b::/96 NAT64 address forms, allowing an authenticated RFC 6062 TCP CONNECT relay client to bypass an IPv4 denied-peer-ip range when the Coturn host has a useful translation route. This issue is fixed in version 4.13.1.

🎖@cveNotify

🚨 CVE-2026-73213
Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.16.0, addr_less_eq() in src/client/ns_turn_ioaddr.c uses a component-wise comparison for native IPv6 min-max intervals in ioa_addr_in_range(), allowing an authenticated TURN client to relay to an IPv6 peer that is numerically within a configured non-prefix-aligned denied-peer-ip range but is classified as outside it. This issue is fixed in version 4.16.0.

🎖@cveNotify

🚨 CVE-2026-73214
Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.16.0, dtls_server_input_handler() and create_new_connected_udp_socket() in src/apps/relay/dtls_listener.c retain OpenSSL dtls1_reassemble_fragment() state for a 35-byte fragmented ClientHello declaring a 650,000-byte handshake before cookie validation, allowing an unauthenticated remote sender using fresh UDP tuples to exhaust memory without TURN credentials, a completed handshake, a valid cookie, or source spoofing. This issue is fixed in version 4.16.0.

🎖@cveNotify

🚨 CVE-2026-73215
Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.17.0, turnports_allocate_even() in src/apps/relay/turn_ports.c marks the unused odd sibling port as TPS_TAKEN_ODD for an EVEN-PORT Allocate request with reservation bit R=0 even though no RTCP socket will release it, allowing an authenticated client to permanently exhaust the relay port pool and cause subsequent allocations to fail with STUN error 508. This issue is fixed in version 4.17.0.

🎖@cveNotify

🚨 CVE-2026-73216
Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.17.0, shutdown_client_connection() in src/server/ns_turn_server.c prematurely calls dec_quota() and releases bandwidth accounting during the first-stage close of a mobility-enabled allocation while preserving the allocation, relay socket, session, and mobility ticket, allowing an authenticated client to bypass --user-quota and --total-quota and exhaust relay ports. This issue is fixed in version 4.17.0.

🎖@cveNotify

🚨 CVE-2026-73217
Cursor is a code editor built for programming with AI. Prior to 3.1.2, Cursor IDE for macOS allows an agent running in Auto-Run Sandbox mode to replace a virtual environment's Python executable with a malicious wrapper that the Microsoft Python extension invokes outside the sandbox, allowing arbitrary host commands with the user's privileges, including modifying files outside the workspace and launching applications. This issue is fixed in version 3.1.2.

🎖@cveNotify

🚨 CVE-2026-73218
Cursor is a code editor built for programming with AI. Prior to 3.0.0, Cursor IDE for macOS allows an agent running in Auto-Run Sandbox mode, when Docker Desktop and the Dev Containers CLI are installed, to launch a privileged container and mount Docker's virtiofs0, granting read and write access to the user's home directory and enabling host command execution with the user's privileges without an additional permission prompt. This issue is fixed in version 3.0.0.

🎖@cveNotify

🚨 CVE-2026-73223
electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.15.120, electerm allows a malicious SFTP server to write attacker-controlled content outside the temporary directory because the server-controlled filename name used by editWithSystemEditor in src/client/components/sftp/file-item.jsx is interpolated into path.resolve without sanitization. This issue is fixed in version 3.15.120.

🎖@cveNotify

🚨 CVE-2026-73224
electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.15.120, electerm allows a malicious FTP or SFTP server to execute arbitrary commands when a user downloads a crafted folder and invokes Properties and Calculate Size because calcLocal in src/client/components/sftp/file-info-modal.jsx inserts the server-controlled folder name into a du -sh shell command without safely escaping single quotes. This issue is fixed in version 3.15.120.

🎖@cveNotify

🚨 CVE-2026-73225
electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.15.120, electerm allows a malicious FTP or SFTP server to write attacker-controlled content outside the selected download directory because recursive transfers in src/client/components/file-transfer/transfer.jsx pass server-supplied file.name and folder.name values to resolve without sanitization. This issue is fixed in version 3.15.120.

🎖@cveNotify

🚨 CVE-2026-73226
electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.15.186, electerm allows an authenticated WebSocket client to invoke unintended internal functions through client-controlled func values in upgrade-func in src/app/server/dispatch-center.js and handleFs in src/app/server/fs.js, exposing Upgrade and fsExport methods that can execute commands, open files, mutate the filesystem, or terminate the process. This issue is fixed in version 3.15.186.

🎖@cveNotify

🚨 CVE-2026-73227
electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.15.120, electerm allows a malicious RDP server to write attacker-controlled content outside the selected save directory because the RDP clipboard download path in src/client/components/rdp/file-transfer.js passes the server-controlled CLIPRDR filename fileInfo.name to osResolve without sanitization. This issue is fixed in version 3.15.120.

🎖@cveNotify

🚨 CVE-2026-48813
Flawfinder is a a static analysis tool for finding vulnerabilities in C/C++ source code. Versions prior to 2.0.20 have an improper input neutralization issue leading to output manipulation, specifically, Terminal/ANSI Escape Sequence Injection and XML Injection. A malicious file whose name contains ANSI escape sequences can end up being included in flawfinder's standard terminal output, with many effects. Untrusted fields (such as filenames, categories, or code context text) were not properly sanitized when generating structured reports. An attacker could exploit this to corrupt CSV formats or inject arbitrary XML attributes into SonarQube outputs via output_sonar(). It impacts those who use flawfinder to evaluate intentionally malicious filenames or file contents. This issue has been fully patched in Version 2.0.20 (released 2026-05-16). There is no configuration-based workaround within older versions of flawfinder. If an immediate upgrade is not possible, users can mitigate the risk by pre-scanning filenames, inspecting raw output, and/or restricting untrusted inputs.

🎖@cveNotify

🚨 CVE-2026-73231
Faker generates massive amounts of fake data in the browser and Node.js. Prior to 10.5.0, the faker.helpers.fake method in src/modules/helpers/eval.ts allows attacker-controlled fake templates to access the Function constructor through fakeEval.resolveProperty when a function returns another function, enabling arbitrary JavaScript code execution. This issue is fixed in version 10.5.0.

🎖@cveNotify

🚨 CVE-2026-63134
Malcolm is a network traffic analysis tool suite. Prior to version 26.07.0, `safe-extract.py` protects file extraction with libarchive's secure flags, but creates directory entries with a raw `os.makedirs(os.path.join(dest, entry.pathname))` that has no traversal protection. An uploaded malicious archive containing a directory entry with a `../` sequence or an absolute path causes the filebeat processing container to create directories outside the intended extraction directory. Version 26.07.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-63177
Malcolm is a network traffic analysis tool suite. Prior to version 26.07.0, role-based access control enforced in the Nginx OpenResty Lua layer evaluates the raw, unnormalized `ngx.var.request_uri`, while Nginx itself routes requests using the normalized path. An authenticated low-privilege user can prepend a traversal segment (for example `/x/../upload/...`) so that Nginx routes the request to a restricted backend while the Lua role check fails to match any rule and falls open, granting access it should deny. Version 26.07.0 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-73248
calibre is an e-book manager. Prior to 9.12.0, calibre processes attacker-controlled composite_template metadata from a malicious EPUB, OPF, PDF, or similar file through program: and a nested template() call whose formatter does not inherit allow_python_templates=False, allowing a nested python: template to reach compile_python_template and execute arbitrary Python code when the file is opened or imported. This issue is fixed in version 9.12.0.

🎖@cveNotify

🚨 CVE-2026-73249
calibre is an e-book manager. Prior to 9.12.0, the calibre Content Server endpoint POST /book-update-annotations/{library_id}/{book_id}/{fmt} in src/calibre/srv/books.py omits needs_db_write=True, causing Router.dispatch() to skip ctx.check_for_write_access() before update_annotations() passes attacker-controlled JSON to db.merge_annotations_for_book(), which allows a readonly user or an anonymous user on an unauthenticated deployment to persist unauthorized book annotation changes. This issue is fixed in version 9.12.0.

🎖@cveNotify

🚨 CVE-2026-47226
Admidio is an open-source user management solution. Prior to version 5.0.10, an authenticated Admidio member with upload rights on any one folder can permanently delete files from folders where they have only view access. The authorization check at the top of `modules/documents-files.php` evaluates upload rights against the attacker-supplied `folder_uuid` URL parameter — not the file's actual parent folder. The `file_delete` handler then only verifies view rights on the file's real location, never upload rights. By passing a folder they legitimately own in `folder_uuid` while targeting a file in a restricted folder via `file_uuid`, an attacker bypasses the upload-right check entirely and permanently deletes the file. This is an incomplete fix of GHSA-rmpj-3x5m-9m5f, which was patched in v5.0.7 but remains exploitable in v5.0.9. User should upgrade to v5.0.10 to receive an updated fix.

🎖@cveNotify

🚨 CVE-2026-47227
Admidio is an open-source user management solution. `modules/categories.php` checks that the supplied `type` parameter (`ANN`, `EVT`, `ROL`, `USF`, …) corresponds to a module the actor administers. The follow-up "is this specific category editable by me" check at lines 56-61 is dead code because it compares `$getType` (a category-type code) against mode names (`edit`/`save`/`delete`); the condition is permanently false, so `$category->isEditable()` is never invoked. Prior to version 5.0.10, the `delete`, `sequence`, and `save` switch cases load the category by the supplied UUID and act on it without re-checking that the category belongs to a module the actor administers. A user holding only one module-administrator right can therefore destroy or reorder empty categories belonging to *other* modules — for example, an announcements administrator can delete role categories, profile-field categories, or weblink categories that they have no right to touch. Version 5.0.10 fixes the issue.

🎖@cveNotify

🚨 CVE-2026-47228
Admidio is an open-source user management solution. `modules/registration.php` mode `send_login` regenerates a random password for `user_uuid_assigned`, stores its bcrypt hash in `adm_users.usr_password`, and emails the cleartext to that user. Every other state-changing mode in the same file (`assign_member`, `assign_user`, `delete_user`, `create_user`) calls `SecurityUtils::validateCsrfToken($_POST['adm_csrf_token'])` first; the `send_login` branch does not. Prior to version 5.0.10, page visited by a registration-administrator can issue the request as a top-level navigation, the browser sends the admin's `SameSite=Lax` cookies, and the server resets the chosen user's password without any further interaction from the admin. Version 5.0.10 fixes the issue.

🎖@cveNotify