🚨 CVE-2026-19233
CWE-918: Server-Side Request Forgery (SSRF) vulnerability exists that could cause unauthorized command execution and disclosure of server data when an attacker with a privileged account sends crafted, unvalidated parameters to a server endpoint.
🎖@cveNotify
CWE-918: Server-Side Request Forgery (SSRF) vulnerability exists that could cause unauthorized command execution and disclosure of server data when an attacker with a privileged account sends crafted, unvalidated parameters to a server endpoint.
🎖@cveNotify
🚨 CVE-2026-23855
Dell iDRAC9, 14G versions prior to 7.00.00.184, 15G/16G versions prior to 7.30.10.50, and Dell iDRAC10, 17G versions prior to 1.30.30.50, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to command injection.
🎖@cveNotify
Dell iDRAC9, 14G versions prior to 7.00.00.184, 15G/16G versions prior to 7.30.10.50, and Dell iDRAC10, 17G versions prior to 1.30.30.50, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to command injection.
🎖@cveNotify
🚨 CVE-2026-40635
Dell PowerScale OneFS versions 9.12.0.0 through 9.13.1.0 contain an Insecure Temporary File vulnerability. A low privileged remote attacker could potentially exploit this vulnerability, leading to denial of service and information tampering.
🎖@cveNotify
Dell PowerScale OneFS versions 9.12.0.0 through 9.13.1.0 contain an Insecure Temporary File vulnerability. A low privileged remote attacker could potentially exploit this vulnerability, leading to denial of service and information tampering.
🎖@cveNotify
🚨 CVE-2026-46460
Dell PowerScale OneFS, versions 9.5.0.0 through 9.7.1.15, versions 9.8.0.0 through 9.13.1.0, and versions prior to 9.15.0.0, contain an Incorrect Authorization vulnerability. A low privileged adjacent network attacker could potentially exploit this vulnerability, leading to unauthorized modification of system logs.
🎖@cveNotify
Dell PowerScale OneFS, versions 9.5.0.0 through 9.7.1.15, versions 9.8.0.0 through 9.13.1.0, and versions prior to 9.15.0.0, contain an Incorrect Authorization vulnerability. A low privileged adjacent network attacker could potentially exploit this vulnerability, leading to unauthorized modification of system logs.
🎖@cveNotify
🚨 CVE-2026-47156
MantisBT is an open source bug tracker. Versions 2.28.3 and earlier contain a critical authentication bypass in the SOAP API's mci_check_login() function. Any user knowing any valid cookie_string can authenticate as any other user (knowing their username), including the administrator, without knowing the target's password. The vulnerability is exploitable with zero prior access on default MantisBT installations because self-registration is enabled by default ($g_allow_signup = ON). A self-registered user can use their own cookie_string (readable from their browser's MANTIS_STRING_COOKIE cookie after login) to impersonate the administrator via the SOAP API. The REST API is NOT affected. The REST API's AuthMiddleware derives the username server-side from the API token or session cookie, so the username cannot be spoofed. The Web UI is NOT affected. The Web UI authenticates via PHP session cookies (PHPSESSID) and validates the MANTIS_STRING_COOKIE against the logged-in user through auth_is_cookie_valid(). The username is derived server-side from the cookie, not supplied by the client. Version 2.28.4 contains a patch. No known workarounds are available.
🎖@cveNotify
MantisBT is an open source bug tracker. Versions 2.28.3 and earlier contain a critical authentication bypass in the SOAP API's mci_check_login() function. Any user knowing any valid cookie_string can authenticate as any other user (knowing their username), including the administrator, without knowing the target's password. The vulnerability is exploitable with zero prior access on default MantisBT installations because self-registration is enabled by default ($g_allow_signup = ON). A self-registered user can use their own cookie_string (readable from their browser's MANTIS_STRING_COOKIE cookie after login) to impersonate the administrator via the SOAP API. The REST API is NOT affected. The REST API's AuthMiddleware derives the username server-side from the API token or session cookie, so the username cannot be spoofed. The Web UI is NOT affected. The Web UI authenticates via PHP session cookies (PHPSESSID) and validates the MANTIS_STRING_COOKIE against the logged-in user through auth_is_cookie_valid(). The username is derived server-side from the cookie, not supplied by the client. Version 2.28.4 contains a patch. No known workarounds are available.
🎖@cveNotify
GitHub
Prevent SOAP API auth bypass using cookie_string · mantisbt/mantisbt@e3571c3
Verify that the given cookie actually belongs to the user trying to
login, deny access if not.
Username comparison is performed case insensitively.
Fixes #37121, GHSA-c2xg-qjqw-2v98
login, deny access if not.
Username comparison is performed case insensitively.
Fixes #37121, GHSA-c2xg-qjqw-2v98
🚨 CVE-2026-70425
Dell PowerScale OneFS, Versions 9.5.0.0 through 9.7.1.0, Versions 9.8.0.0 through 9.10.1.0, and Versions 9.11.0.0 through 9.14.0.1, contain a command injection vulnerability. An admin privileged local attacker could potentially exploit this vulnerability, leading to elevation of privileges to root, impacting confidentiality, integrity, and availability.
🎖@cveNotify
Dell PowerScale OneFS, Versions 9.5.0.0 through 9.7.1.0, Versions 9.8.0.0 through 9.10.1.0, and Versions 9.11.0.0 through 9.14.0.1, contain a command injection vulnerability. An admin privileged local attacker could potentially exploit this vulnerability, leading to elevation of privileges to root, impacting confidentiality, integrity, and availability.
🎖@cveNotify
🚨 CVE-2026-77120
CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could cause privilege escalation to root and unauthorized execution of administrative functions when an authenticated user with SSH enabled interacts with the operating system console that improperly processes user-controlled input.
🎖@cveNotify
CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could cause privilege escalation to root and unauthorized execution of administrative functions when an authenticated user with SSH enabled interacts with the operating system console that improperly processes user-controlled input.
🎖@cveNotify
🚨 CVE-2026-80914
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready
iso_conn_ready() looks up the BIS listener socket with iso_get_sock(),
which takes a reference, and then, without re-checking its state,
creates a child socket from it:
parent = iso_get_sock(hdev, ...);
if (!parent)
return;
lock_sock(parent);
sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...);
...
iso_chan_add(conn, sk, parent);
...
release_sock(parent);
sock_put(parent);
If the listener socket is closed concurrently, between iso_get_sock()
and lock_sock(), the reference taken by iso_get_sock() may be the last
one: the close path drops the link-list reference, and once
iso_conn_ready() drops its own reference at the end of the function the
socket is freed. The child socket, however, is already linked to the
freed parent, and a later disconnect of the child runs iso_chan_del()
-> bt_accept_unlink(), which dereferences the dangling parent pointer
into the freed accept queue (a use-after-free). The same dangling
pointer is also dereferenced through parent->***() in
iso_chan_del().
Fix it the same way the connected (non-BIS) path was fixed in commit
0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"):
after taking the socket lock, re-check that the parent is still a
listening, alive socket, and bail out otherwise.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready
iso_conn_ready() looks up the BIS listener socket with iso_get_sock(),
which takes a reference, and then, without re-checking its state,
creates a child socket from it:
parent = iso_get_sock(hdev, ...);
if (!parent)
return;
lock_sock(parent);
sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...);
...
iso_chan_add(conn, sk, parent);
...
release_sock(parent);
sock_put(parent);
If the listener socket is closed concurrently, between iso_get_sock()
and lock_sock(), the reference taken by iso_get_sock() may be the last
one: the close path drops the link-list reference, and once
iso_conn_ready() drops its own reference at the end of the function the
socket is freed. The child socket, however, is already linked to the
freed parent, and a later disconnect of the child runs iso_chan_del()
-> bt_accept_unlink(), which dereferences the dangling parent pointer
into the freed accept queue (a use-after-free). The same dangling
pointer is also dereferenced through parent->***() in
iso_chan_del().
Fix it the same way the connected (non-BIS) path was fixed in commit
0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"):
after taking the socket lock, re-check that the parent is still a
listening, alive socket, and bail out otherwise.
🎖@cveNotify
🚨 CVE-2026-80915
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix DPT allocation paths.
Remove the fallback for VRAM to system memory, I tested it and that
doesn't work at all, only a black screen with pipe fault errors were
observed.
On systems with media GT, extra latency is added when accessing stolen
memory when the GT is in MC6. Since we additionally aren't counting how
much memory is used for stolen and we could in theory fill up the
entire stolen area with DPT's, avoid using stolen and only use the
default memory region.
Using stolen may also result in random system hangs under load.
(cherry picked from commit a196406a3831291598fe8e73245914f7acffdfe0)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix DPT allocation paths.
Remove the fallback for VRAM to system memory, I tested it and that
doesn't work at all, only a black screen with pipe fault errors were
observed.
On systems with media GT, extra latency is added when accessing stolen
memory when the GT is in MC6. Since we additionally aren't counting how
much memory is used for stolen and we could in theory fill up the
entire stolen area with DPT's, avoid using stolen and only use the
default memory region.
Using stolen may also result in random system hangs under load.
(cherry picked from commit a196406a3831291598fe8e73245914f7acffdfe0)
🎖@cveNotify
🚨 CVE-2026-80916
In the Linux kernel, the following vulnerability has been resolved:
kcov: fix data corruption and race conditions on PREEMPT_RT
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the
temporary storage used for saving/restoring remote KCOV state is currently
allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads
(e.g., ksoftirqd). If a softirq context preempts a task running a remote
KCOV session, it safely saves the task's state into the per-CPU area.
However, if that softirq thread is subsequently preempted by a higher-
priority softirq thread on the same CPU, the second softirq will overwrite
the same per-CPU area, permanently destroying the original task's KCOV
state.
Fix this data corruption by moving the temporary storage from the per-CPU
area to the per-thread area. Since each softirq thread now owns its own
task context, nested softirq preemption no longer causes data overwrites.
Note that while the temporary storage is now on a per-thread basis, the
per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that
kcov_remote_start() and kcov_remote_stop() operate atomically without
racing against asynchronous interrupts that manipulate the current task's
KCOV state.
It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()
has already called panic() before returning NULL, for there will be no
OOM-killable userspace processes when __init function of built-in module
runs. But this patch also fixes crashing the kernel when vmalloc_node()
in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL
but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in
(1) doing vmalloc() in kcov_remote_start() despite !in_task() context
(2) out-of-array-bounds access if (1) succeeded but
kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE
(3) always leak memory allocated by (1), eventually killing all
OOM-killable userspace processes
problems.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
kcov: fix data corruption and race conditions on PREEMPT_RT
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the
temporary storage used for saving/restoring remote KCOV state is currently
allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads
(e.g., ksoftirqd). If a softirq context preempts a task running a remote
KCOV session, it safely saves the task's state into the per-CPU area.
However, if that softirq thread is subsequently preempted by a higher-
priority softirq thread on the same CPU, the second softirq will overwrite
the same per-CPU area, permanently destroying the original task's KCOV
state.
Fix this data corruption by moving the temporary storage from the per-CPU
area to the per-thread area. Since each softirq thread now owns its own
task context, nested softirq preemption no longer causes data overwrites.
Note that while the temporary storage is now on a per-thread basis, the
per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that
kcov_remote_start() and kcov_remote_stop() operate atomically without
racing against asynchronous interrupts that manipulate the current task's
KCOV state.
It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()
has already called panic() before returning NULL, for there will be no
OOM-killable userspace processes when __init function of built-in module
runs. But this patch also fixes crashing the kernel when vmalloc_node()
in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL
but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in
(1) doing vmalloc() in kcov_remote_start() despite !in_task() context
(2) out-of-array-bounds access if (1) succeeded but
kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE
(3) always leak memory allocated by (1), eventually killing all
OOM-killable userspace processes
problems.
🎖@cveNotify
🚨 CVE-2026-80917
In the Linux kernel, the following vulnerability has been resolved:
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
[mani: removed timestamp from log]
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
[mani: removed timestamp from log]
🎖@cveNotify
🚨 CVE-2026-80918
In the Linux kernel, the following vulnerability has been resolved:
HID: core: fix number/pointer type confusion on long items
When fetch_item() is called by hid_scan_report() on an item with
HID_ITEM_TAG_LONG, it stores a pointer to the item data in
item->data.longdata instead of storing a value directly in
item->data.{u8/u16/u32}.
When item_udata() or item_sdata() encounters such an item, it incorrectly
assumes that the item is in short format, and therefore returns the lower
part of a kernel pointer reinterpreted as a number.
When a HID device is connected whose descriptor contains a
HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this
causes the lower half of a kernel pointer to be printed into dmesg as a
number, like this:
hid (null): invalid report_size 107953555
To fix it, let item_udata() and item_sdata() verify that the item is in
short format.
Note that this bug only affects hid_scan_report(), while the main parsing
pass hid_parse_collections() will always bail out when encountering a long
item.
Sidenote: There are currently no users of data.longdata; maybe we should
just remove any parsing of long-format descriptors as a follow-up.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
HID: core: fix number/pointer type confusion on long items
When fetch_item() is called by hid_scan_report() on an item with
HID_ITEM_TAG_LONG, it stores a pointer to the item data in
item->data.longdata instead of storing a value directly in
item->data.{u8/u16/u32}.
When item_udata() or item_sdata() encounters such an item, it incorrectly
assumes that the item is in short format, and therefore returns the lower
part of a kernel pointer reinterpreted as a number.
When a HID device is connected whose descriptor contains a
HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this
causes the lower half of a kernel pointer to be printed into dmesg as a
number, like this:
hid (null): invalid report_size 107953555
To fix it, let item_udata() and item_sdata() verify that the item is in
short format.
Note that this bug only affects hid_scan_report(), while the main parsing
pass hid_parse_collections() will always bail out when encountering a long
item.
Sidenote: There are currently no users of data.longdata; maybe we should
just remove any parsing of long-format descriptors as a follow-up.
🎖@cveNotify
🚨 CVE-2026-80920
In the Linux kernel, the following vulnerability has been resolved:
io_uring: defer eventfd signaling when queued from a wakeup handler
io_req_local_work_add() signals the CQ ring eventfd inline when it is the
one to push the first entry onto ->work_list. For DEFER_TASKRUN rings that
add is frequently done from a waitqueue wakeup handler, where an
arbitrary waitqueue lock is held.
eventfd_signal_mask() only refuses to recurse when current->in_eventfd
is set, but that bit is set by eventfd_signal_mask() itself. If the wake
chain starts somewhere else, signal goes out inline and can feed back
into epoll.
Add IOU_F_TWQ_IN_WAKE, set it on the task_work add done from the three
waitqueue callbacks, and use it to force io_eventfd_signal() down the
existing call_rcu_hurry() deferral instead of signaling inline.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
io_uring: defer eventfd signaling when queued from a wakeup handler
io_req_local_work_add() signals the CQ ring eventfd inline when it is the
one to push the first entry onto ->work_list. For DEFER_TASKRUN rings that
add is frequently done from a waitqueue wakeup handler, where an
arbitrary waitqueue lock is held.
eventfd_signal_mask() only refuses to recurse when current->in_eventfd
is set, but that bit is set by eventfd_signal_mask() itself. If the wake
chain starts somewhere else, signal goes out inline and can feed back
into epoll.
Add IOU_F_TWQ_IN_WAKE, set it on the task_work add done from the three
waitqueue callbacks, and use it to force io_eventfd_signal() down the
existing call_rcu_hurry() deferral instead of signaling inline.
🎖@cveNotify
🚨 CVE-2026-80921
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: vsie: zero stale crypto bits
When shadowing crypto access bits from a format0 apcb (crycb 0 or 1),
the bits 64..255 are unchanged from whatever is in the vsie page in the
crycb and thus in the apcb. This gives a nested guest potential access
to a device no longer available. Zero out the remaining bits.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: vsie: zero stale crypto bits
When shadowing crypto access bits from a format0 apcb (crycb 0 or 1),
the bits 64..255 are unchanged from whatever is in the vsie page in the
crycb and thus in the apcb. This gives a nested guest potential access
to a device no longer available. Zero out the remaining bits.
🎖@cveNotify
🚨 CVE-2026-80922
In the Linux kernel, the following vulnerability has been resolved:
crypto: qcom-rng - Allow zero as a random number
Zero is a valid random number and needs to be allowed. Otherwise the
output is distinguishable from random.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
crypto: qcom-rng - Allow zero as a random number
Zero is a valid random number and needs to be allowed. Otherwise the
output is distinguishable from random.
🎖@cveNotify
🚨 CVE-2026-80923
In the Linux kernel, the following vulnerability has been resolved:
xhci: dbgtty: Fix unregister on tty_register_driver() failure
If tty_register_driver() fails, it drops the reference, but fails to set
the global dbc_tty_driver to NULL, causing the unregister to be called
again when module exits.
On module unload dbc_tty_exit() only gates its cleanup on the driver
pointer being non-NULL, so it operates on the already-freed driver:
module_init(xhci_hcd_init)
xhci_hcd_init()
xhci_dbc_init() [return value ignored]
dbc_tty_init()
tty_register_driver() fails
tty_driver_kref_put() -> driver freed
(dbc_tty_driver left dangling)
...
module_exit(xhci_hcd_fini)
xhci_hcd_fini()
xhci_dbc_exit()
dbc_tty_exit()
if (dbc_tty_driver) -> true (dangling)
tty_unregister_driver() -> use-after-free
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
xhci: dbgtty: Fix unregister on tty_register_driver() failure
If tty_register_driver() fails, it drops the reference, but fails to set
the global dbc_tty_driver to NULL, causing the unregister to be called
again when module exits.
On module unload dbc_tty_exit() only gates its cleanup on the driver
pointer being non-NULL, so it operates on the already-freed driver:
module_init(xhci_hcd_init)
xhci_hcd_init()
xhci_dbc_init() [return value ignored]
dbc_tty_init()
tty_register_driver() fails
tty_driver_kref_put() -> driver freed
(dbc_tty_driver left dangling)
...
module_exit(xhci_hcd_fini)
xhci_hcd_fini()
xhci_dbc_exit()
dbc_tty_exit()
if (dbc_tty_driver) -> true (dangling)
tty_unregister_driver() -> use-after-free
🎖@cveNotify
🚨 CVE-2026-80924
In the Linux kernel, the following vulnerability has been resolved:
crypto: krb5 - use kfree_sensitive() for derived key buffers
crypto_krb5_prepare_encryption() and crypto_krb5_prepare_checksum()
free the buffer holding the freshly derived keys with plain kfree(),
leaving the key material behind in the freed slab object.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
crypto: krb5 - use kfree_sensitive() for derived key buffers
crypto_krb5_prepare_encryption() and crypto_krb5_prepare_checksum()
free the buffer holding the freshly derived keys with plain kfree(),
leaving the key material behind in the freed slab object.
🎖@cveNotify
🚨 CVE-2026-80925
In the Linux kernel, the following vulnerability has been resolved:
vlan: fix skb_under_panic and races when toggling HW VLAN offload
Toggling hardware VLAN TX offload (NETIF_F_HW_VLAN_CTAG_TX or
NETIF_F_HW_VLAN_STAG_TX) on a lower device invokes vlan_transfer_features(),
which dynamically changed vlandev->hard_header_len.
This causes two issues:
1. Lockless TX paths (e.g. packet_snd in af_packet.c, ip6_finish_output2)
read dev->hard_header_len without holding RTNL lock. Mutating
hard_header_len dynamically under RTNL creates a data race where upper
layers reserve insufficient headroom based on a stale hard_header_len,
resulting in skb_under_panic when vlan_dev_hard_header() is called.
2. In addition, vlan_transfer_features() updated hard_header_len without
updating header_ops, causing a mismatch between allocated headroom
and header creation.
Always setting dev->hard_header_len = real_dev->hard_header_len and
dev->needed_headroom = real_dev->needed_headroom + VLAN_HLEN unconditionally
ensures:
- dev->hard_header_len remains 100% static and immutable at real_dev->hard_header_len,
eliminating all dynamic runtime updates and data races on hard_header_len.
- Upper layers allocating skbs via LL_RESERVED_SPACE() will always reserve
sufficient headroom for software VLAN tag insertion (real_dev->hard_header_len +
real_dev->needed_headroom + VLAN_HLEN).
- vlandev inherits real_dev->needed_tailroom so underlying trailer/padding/ICV
requirements are honored.
- AF_PACKET SOCK_RAW network header offsets remain correctly aligned at
real_dev->hard_header_len.
- vlan_header_ops is used unconditionally.
Note to stable teams: Make sure to backport these commits:
e16e960d55a4 ("ipvlan: inherit needed_headroom and needed_tailroom from phy_dev")
cef51860becd ("macvlan: inherit needed_headroom and needed_tailroom from lowerdev")
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
vlan: fix skb_under_panic and races when toggling HW VLAN offload
Toggling hardware VLAN TX offload (NETIF_F_HW_VLAN_CTAG_TX or
NETIF_F_HW_VLAN_STAG_TX) on a lower device invokes vlan_transfer_features(),
which dynamically changed vlandev->hard_header_len.
This causes two issues:
1. Lockless TX paths (e.g. packet_snd in af_packet.c, ip6_finish_output2)
read dev->hard_header_len without holding RTNL lock. Mutating
hard_header_len dynamically under RTNL creates a data race where upper
layers reserve insufficient headroom based on a stale hard_header_len,
resulting in skb_under_panic when vlan_dev_hard_header() is called.
2. In addition, vlan_transfer_features() updated hard_header_len without
updating header_ops, causing a mismatch between allocated headroom
and header creation.
Always setting dev->hard_header_len = real_dev->hard_header_len and
dev->needed_headroom = real_dev->needed_headroom + VLAN_HLEN unconditionally
ensures:
- dev->hard_header_len remains 100% static and immutable at real_dev->hard_header_len,
eliminating all dynamic runtime updates and data races on hard_header_len.
- Upper layers allocating skbs via LL_RESERVED_SPACE() will always reserve
sufficient headroom for software VLAN tag insertion (real_dev->hard_header_len +
real_dev->needed_headroom + VLAN_HLEN).
- vlandev inherits real_dev->needed_tailroom so underlying trailer/padding/ICV
requirements are honored.
- AF_PACKET SOCK_RAW network header offsets remain correctly aligned at
real_dev->hard_header_len.
- vlan_header_ops is used unconditionally.
Note to stable teams: Make sure to backport these commits:
e16e960d55a4 ("ipvlan: inherit needed_headroom and needed_tailroom from phy_dev")
cef51860becd ("macvlan: inherit needed_headroom and needed_tailroom from lowerdev")
🎖@cveNotify
🚨 CVE-2026-85788
Incomplete list of disallowed inputs in the mutable SQL detector component in Amazon awslabs mysql-mcp-server might allow context-dependent actors to bypass the read-only enforcement gate and reach file-read and file-write SQL sinks via SQL inline comments that the regex engine does not treat as whitespace.
To remediate this issue, users should upgrade to version 1.0.23.
🎖@cveNotify
Incomplete list of disallowed inputs in the mutable SQL detector component in Amazon awslabs mysql-mcp-server might allow context-dependent actors to bypass the read-only enforcement gate and reach file-read and file-write SQL sinks via SQL inline comments that the regex engine does not treat as whitespace.
To remediate this issue, users should upgrade to version 1.0.23.
🎖@cveNotify
🚨 CVE-2026-87853
A flaw was found in SSSD's IdP authentication provider. The eval_access_token_buf() function compares the OIDC subject identifier using strncmp() with the authenticated user's identifier length, performing a prefix comparison instead of an exact match. An attacker whose IdP identifier is a strict prefix of a target user's identifier can authenticate as the target user.
🎖@cveNotify
A flaw was found in SSSD's IdP authentication provider. The eval_access_token_buf() function compares the OIDC subject identifier using strncmp() with the authenticated user's identifier length, performing a prefix comparison instead of an exact match. An attacker whose IdP identifier is a strict prefix of a target user's identifier can authenticate as the target user.
🎖@cveNotify
Redhat
CVE-2026-87853 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-87872
A flaw was found in the OCAPI modules (ocapi_command, ocapi_info) of the
community.general Ansible collection. The shared OCAPI request helper disables
TLS certificate validation on every request and the modules expose no parameter
to re-enable it, while sending HTTP Basic-Auth credentials to an https endpoint.
An attacker positioned on the network path between the Ansible controller and the
OCAPI-managed storage/enclosure device can present any certificate, intercept the
session, capture the credentials, and tamper with responses.
🎖@cveNotify
A flaw was found in the OCAPI modules (ocapi_command, ocapi_info) of the
community.general Ansible collection. The shared OCAPI request helper disables
TLS certificate validation on every request and the modules expose no parameter
to re-enable it, while sending HTTP Basic-Auth credentials to an https endpoint.
An attacker positioned on the network path between the Ansible controller and the
OCAPI-managed storage/enclosure device can present any certificate, intercept the
session, capture the credentials, and tamper with responses.
🎖@cveNotify
Redhat
CVE-2026-87872 - Red Hat Customer Portal
CVE Details App