🚨 CVE-2026-55854
MariaDB Connector/Node.js is used to connect applications developed on Node.js to MariaDB and MySQL databases. Prior to 3.2.4, 3.3.3, 3.4.6, and 3.5.3, MariaDB Connector/Node.js can disclose an account password when PAM dialog authentication is negotiated over an insecure transport. In lib/cmd/handshake/auth/pam-password-auth.js and lib/cmd/handshake/authentication.js, the SendPamAuthPacketFactory behavior for the server-side plugin dialog lacked the secure-transport gate applied to mysql_clear_password. With the default sslMode=DISABLE and restrictedAuth=null settings, a hostile or on-path server can send an Authentication Switch Request for dialog over plain TCP, causing the connector to return the account password in cleartext. Properly verified TLS and a local Unix socket prevent this path, while fingerprint-only server identity validation is not sufficient. This issue is fixed in versions 3.2.4, 3.3.3, 3.4.6, and 3.5.3.

🎖@cveNotify

🚨 CVE-2026-55855
MariaDB Connector/Node.js is used to connect applications developed on Node.js to MariaDB and MySQL databases. Prior to 3.2.4, 3.3.3, 3.4.6, and 3.5.3, MariaDB Connector/Node.js permits SQL injection when attacker-controlled Buffer parameters are escaped client-side under the big5, gbk, sjis, cp932, or gb18030 client character sets. PacketOutputStream.writeBufferEscape in lib/io/packet-output-stream.js escaped bytes without the charset-aware getMbRecognizer logic in lib/misc/charset-mb.js. The server SQL lexer runs my_ismbchar before escape processing, so an attacker-controlled lead byte can consume the inserted 0x5C backslash as a multibyte trail byte and leave the following 0x27 quote unescaped, terminating the string literal and allowing arbitrary SQL. The default utf8mb4 character set and parameters sent through the execute binary prepared-statement path are not affected. Successful exploitation can expose or modify data available to the database account. This issue is fixed in versions 3.2.4, 3.3.3, 3.4.6, and 3.5.3.

🎖@cveNotify

🚨 CVE-2026-55856
MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. Prior to 2.7.14, 3.3.5, 3.4.3, and 3.5.9, when a Java application connects with sslMode=verify-full or sslMode=verify-ca, supplies a password, and does not configure serverSslCert or trustStore, Connector/J can accept an untrusted self-signed certificate through the fallbackToSystemTrustStore=true ephemeral trust manager and record its certFingerprint for later identity binding. The OK-packet and authentication-switch paths enforce the certificate fingerprint, but the initial-handshake path does not. HandshakeResponse.encode() can therefore build and send a mysql_clear_password response before checking certFingerprint != null && !isMitMProof(), sslMode, or whether the authentication plugin is resistant to a man-in-the-middle, and the initial path also bypasses restrictedAuth. An active man-in-the-middle or hostile server can present a self-signed certificate, claim to be MariaDB, select mysql_clear_password as the initial authentication plugin, and receive the full database password before the connection is rejected. This issue is fixed in versions 2.7.14, 3.3.5, 3.4.3, and 3.5.9.

🎖@cveNotify

🚨 CVE-2026-55858
MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. Prior to 2.7.14, 3.3.5, 3.4.3, and 3.5.9, the connector encodes and decodes protocol text and performs client-side escaping under the assumption that the connection character set is UTF-8. The server can report a mid-session change to character_set_client through OK-packet session-state tracking, including a change caused by SET NAMES, a stored routine or trigger, server configuration, or a hostile server. If character_set_client changes to a non-UTF-8 value, the driver continues to read and write UTF-8 while the server interprets the same bytes under another encoding, causing silent data corruption and a client/server charset-confusion mismatch that can defeat byte-wise quoting or escaping. The fix accepts only utf8, utf8mb3, or utf8mb4 after initialization; any other value causes SQLException with SQLState 08000 and closes the connection. This issue is fixed in versions 2.7.14, 3.3.5, 3.4.3, and 3.5.9.

🎖@cveNotify

🚨 CVE-2026-55859
MariaDB Connector/R2DBC is a non-blocking MariaDB and MySQL client implemented in Java. Prior to 1.4.1, org.mariadb:r2dbc-mariadb encodes and decodes all character data under the assumption that the connection character set is UTF-8. A server can announce a mid-session change to character_set_client through the OK-packet session-state-tracking mechanism, including through SET NAMES executed by a stored routine or trigger, server configuration, or a hostile or man-in-the-middle server. If the new character set is not UTF-8, the driver continues to exchange UTF-8 while the server interprets the same bytes under a different encoding, causing silent data corruption and a client/server charset-confusion mismatch that can defeat byte-wise quoting or escaping. The fix accepts only utf8, utf8mb3, or utf8mb4 after initialization; any other value raises R2dbcNonTransientResourceException with SQLState 08000 and closes the connection. This issue is fixed in version 1.4.1.

🎖@cveNotify

🚨 CVE-2026-55860
MariaDB Connector/R2DBC is a non-blocking MariaDB and MySQL client implemented in Java. Prior to 1.4.1, org.mariadb:r2dbc-mariadb does not gate clear-text password authentication plugins on transport encryption because the AuthenticationPlugin interface has no capability for a plugin to require a secure connection. A hostile or man-in-the-middle MariaDB server can send an AuthSwitchRequest naming mysql_clear_password or dialog (PAM) over a plain-TCP unencrypted connection, and AuthenticationFlow permits ClearPasswordPluginFlow or PamPluginFlow to return the user's password as cleartext bytes on the wire. The disclosed credentials can subsequently be used to authenticate directly to the database server. This issue is fixed in version 1.4.1.

🎖@cveNotify

🚨 CVE-2026-79743
MCPHub is a unified hub for centrally managing and dynamically orchestrating multiple MCP servers/APIs into separate endpoints with flexible routing strategies. Prior to version 0.12.13, MCPB File Upload Handler extracts a ZIP file and reads manifest.json from it. The name field in the manifest is directly concatenated into a file path (line 107) without any sanitization or path traversal character validation. An attacker can craft a malicious MCPB file where manifest.name is set to something like ../../../etc/malicious, causing the file to be extracted to an arbitrary location on the file system. The cleanupOldMcpbServer function (line 110) also uses the unsanitized name, potentially allowing deletion of arbitrary directories. This issue has been patched in version 0.12.13.

🎖@cveNotify

🚨 CVE-2026-79744
MCPHub is a unified hub for centrally managing and dynamically orchestrating multiple MCP servers/APIs into separate endpoints with flexible routing strategies. Prior to version 1.0.29, MCPHub's PUT /api/system-config endpoint (handler updateSystemConfig) performs no authorization check. It is protected only by the app-wide authentication middleware and a rate limiter — it never inspects req.user.isAdmin. This issue has been patched in version 1.0.29.

🎖@cveNotify

🚨 CVE-2026-79745
MCPHub is a unified hub for centrally managing and dynamically orchestrating multiple MCP servers/APIs into separate endpoints with flexible routing strategies. Prior to version 1.0.32, the built-in prompt and resource controllers perform no role checking. The mutating POST/PUT /api/prompts* and POST/PUT /api/resources* routes are attached to the authenticated router with no admin gate, and the handlers never read req.user. The DAO singletons they write are consulted first — ahead of any connected MCP server — for every session in handleGetPromptRequest / handleReadResourceRequest. A non-admin can therefore create, overwrite, and shadow global prompt templates and resources that all other users are served. The scored impact is the unauthorized integrity violation (creation/tampering/shadowing of globally-served records); stored prompt injection into other users' LLM sessions is a downstream consequence of that tampering. This issue has been patched in version 1.0.32.

🎖@cveNotify

🚨 CVE-2026-79746
MCPHub is a unified hub for centrally managing and dynamically orchestrating multiple MCP servers/APIs into separate endpoints with flexible routing strategies. Prior to version 1.0.31, when a bearer key with accessType: 'servers' (or 'custom') is used against a group route, isBearerKeyAllowedForRequest grants access to the entire group as long as any single server in that group appears in the key's allowedServers list — not only when every server the key is scoped to matches, and critically, without ever re-checking allowedServers again once the group-level connection is authorized. A key explicitly scoped to one specific server therefore also grants full access to every other server that happens to share a group with it, including servers the key was never authorized for. This issue has been patched in version 1.0.31.

🎖@cveNotify

🚨 CVE-2026-79747
MCPHub is a unified hub for centrally managing and dynamically orchestrating multiple MCP servers/APIs into separate endpoints with flexible routing strategies. Prior to version 1.0.32, an authenticated non-admin user can register a server pointing at an arbitrary URL and make the hub issue server-side requests to it, with no egress filtering (no block of loopback / RFC1918 / link-local 169.254.0.0/16). Via the OpenAPI proxy path the response body is returned to the caller (full, reflected SSRF); via the SSE/streamable-http transport the request is sent blind. This issue has been patched in version 1.0.32.

🎖@cveNotify

🚨 CVE-2026-79748
MCPHub is a unified hub for centrally managing and dynamically orchestrating multiple MCP servers/APIs into separate endpoints with flexible routing strategies. Prior to version 0.12.15, the POST /api/servers and PUT /api/servers/:name endpoints in MCPHub create/update MCP server configurations and then immediately spawn the configured stdio process via child_process.spawn. Authentication is required, but there is no authorization check restricting these endpoints to admins, and there is no allowlist/sanitization on the command and args fields. As a result, any authenticated non-admin user can submit a server configuration with command:"/bin/sh" (or any other binary) and arbitrary args, causing MCPHub to execute the attacker-controlled process as the MCPHub server's OS user (commonly root in the published Docker image and in npx/systemd deployments). This issue has been patched in version 0.12.15.

🎖@cveNotify

🚨 CVE-2026-79749
MCPHub is a unified hub for centrally managing and dynamically orchestrating multiple MCP servers/APIs into separate endpoints with flexible routing strategies. Prior to version 1.0.32, MCPHub's SSRF guard in src/utils/ssrf.ts uses a custom isBlockedIpv6 function that only checks for loopback, link-local, unique-local, IPv4-mapped, and IPv4-compatible IPv6 addresses. IPv6 transition address families -- NAT64 (64:ff9b::/96), 6to4 (2002::/16), and Teredo (2001::/32) -- are not checked. An attacker who can specify a URL for an MCP server connection can encode a private IPv4 address inside one of these IPv6 forms to bypass the SSRF guard and reach internal infrastructure. This issue has been patched in version 1.0.32.

🎖@cveNotify

🚨 CVE-2026-79750
MCPHub is a unified hub for centrally managing and dynamically orchestrating multiple MCP servers/APIs into separate endpoints with flexible routing strategies. Prior to version 1.0.30, MCPHub scopes non-admin users to servers they own (list views and config edits enforce ownership), but the tool-execution API does not. Any authenticated non-admin user can invoke tools on MCP servers owned by other users — servers they cannot even see in GET /api/servers. Because connected MCP servers carry real capability (filesystem, HTTP fetch, cloud APIs with the owner's keys), this is cross-tenant compromise: demonstrated arbitrary host file read (/etc/passwd, another user's secrets) and SSRF. This issue has been patched in version 1.0.30.

🎖@cveNotify

🚨 CVE-2026-53552
Goploy is an open-source automation deployment system. In versions 1.17.5 and prior, Project.AddFile, Project.EditFile, Project.RemoveFile, and Project.Edit in cmd/server/api/project/handler.go accept a project or project-file row id from the JSON body and act on it without checking that the project belongs to the caller's namespace. The corresponding model.ProjectFile.GetData and model.Project.GetData queries filter only by row id. A user holding the manager role (or any role that includes the FileSync / EditProject permission) in their own namespace can read, write, or delete files in any project across the install, and can rewrite any project's git remote URL by submitting the foreign id in the body. The git-URL primitive escalates to RCE on the next deploy because Edit runs git remote set-url on the project's working tree. At time of publication, there are no known publicly available patches.

🎖@cveNotify

🚨 CVE-2026-53553
Goploy is an open-source automation deployment system. Prior to version 1.18.0, a severe path traversal vulnerability exists in its backend API endpoints, specifically /deploy/fileDiff (File Compare), when handling file paths provided by the client. This issue has been patched in version 1.18.0.

🎖@cveNotify

🚨 CVE-2026-50198
Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.9.1, an authenticated user can edit their own inactive subscription and set replacement_subscription_id to a subscription ID belonging to another user. The write is accepted, and later the stats logic dereferences that foreign subscription ID without user_id scoping. This lets the attacker infer the victim subscription's monthly-normalized cost by observing changes in their own stats output. This does not expose the full victim subscription object, but it does expose derived financial metadata. This issue has been patched in version 4.9.1.

🎖@cveNotify

🚨 CVE-2026-50199
Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.9.1, endpoints/currency/update_exchange.php loads the first Fixer/API Layer credential globally instead of loading the credential for the authenticated user. As a result, a normal authenticated user without their own provider key can trigger exchange-rate refreshes using another user's stored provider credential. This issue has been patched in version 4.9.1.

🎖@cveNotify

🚨 CVE-2026-54179
backpack/crud provides Create, Read, Update & Delete (CRUD) functions for Backpack, a collection of Laravel packages that help users build custom administration panels. From 6.0.0 until 6.8.14 and 7.0.37, the src/app/Library/Uploaders/SingleBase64Image.php methods SingleBase64Image::uploadFiles and SingleBase64Image::uploadRepeatableFiles, used by image fields through withFiles(), accept any data URI beginning with data:image without validating the declared MIME subtype or decoded bytes, while src/app/Library/Uploaders/Support/FileNameGenerator.php method FileNameGenerator::getExtensionFromFile applies mime_content_type() to the data URI instead of the decoded content. An authenticated administrator can therefore store arbitrary file content under an extensionless filename on the configured disk, which can cause stored cross-site scripting or other unintended behavior when the file is served and accessed. This issue is fixed in version 7.0.38 and 6.8.14.

🎖@cveNotify

🚨 CVE-2026-54598
Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.9.4, endpoints/db/migrate.php executes database schema migrations when called over HTTP with zero authentication. Any unauthenticated attacker can trigger pending migration files against the live SQLite database. This issue has been patched in version 4.9.4.

🎖@cveNotify

🚨 CVE-2026-54599
Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.9.4, login.php generates an OIDC state nonce stored in $_SESSION['oidc_state'], but checksession.php dispatches the OIDC callback without comparing the incoming state against the session value. An attacker can trick a victim into visiting a crafted URL, causing Wallos to exchange the attacker's authorization code and log the victim into the attacker's account. This issue has been patched in version 4.9.4.

🎖@cveNotify