🚨 CVE-2026-54891
Improper Enforcement of Message Integrity During Transmission in a Communication Channel vulnerability in Erlang/OTP ssl (tls_gen_connection module) allows a network-positioned attacker to inject unauthenticated plaintext that the TLS client application later treats as authenticated server data.
The function tls_gen_connection:handle_protocol_record/3 rejects APPLICATION_DATA records that arrive in pre-handshake states when the TLS endpoint acts as a server, but does not apply the same check when the endpoint acts as a client. A network-positioned attacker can send plaintext APPLICATION_DATA records to the client during the handshake. The records are buffered and, once the handshake completes successfully, delivered to the application as if they were authenticated post-handshake data. The attacker cannot observe the client's response or steer the connection, so the impact is limited to blind injection of unauthenticated bytes. The injection window is wider for TLS versions prior to TLS 1.3 than for TLS 1.3.
This vulnerability is associated with program file lib/ssl/src/tls_gen_connection.erl.
TLS 1.3 is affected starting with OTP 22.0, when TLS 1.3 support was added.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.14, from OTP 28.0 before OTP 28.5.0.3, and from OTP 29.0 before OTP 29.0.3, corresponding to ssl from 5.3.4 before 11.2.12.10, from 11.3 before 11.6.0.3, and from 11.7 before 11.7.3. Whether OTP before OTP 17.0, corresponding to ssl before 5.3.4, is affected is unknown.
🎖@cveNotify
Improper Enforcement of Message Integrity During Transmission in a Communication Channel vulnerability in Erlang/OTP ssl (tls_gen_connection module) allows a network-positioned attacker to inject unauthenticated plaintext that the TLS client application later treats as authenticated server data.
The function tls_gen_connection:handle_protocol_record/3 rejects APPLICATION_DATA records that arrive in pre-handshake states when the TLS endpoint acts as a server, but does not apply the same check when the endpoint acts as a client. A network-positioned attacker can send plaintext APPLICATION_DATA records to the client during the handshake. The records are buffered and, once the handshake completes successfully, delivered to the application as if they were authenticated post-handshake data. The attacker cannot observe the client's response or steer the connection, so the impact is limited to blind injection of unauthenticated bytes. The injection window is wider for TLS versions prior to TLS 1.3 than for TLS 1.3.
This vulnerability is associated with program file lib/ssl/src/tls_gen_connection.erl.
TLS 1.3 is affected starting with OTP 22.0, when TLS 1.3 support was added.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.14, from OTP 28.0 before OTP 28.5.0.3, and from OTP 29.0 before OTP 29.0.3, corresponding to ssl from 5.3.4 before 11.2.12.10, from 11.3 before 11.6.0.3, and from 11.7 before 11.7.3. Whether OTP before OTP 17.0, corresponding to ssl before 5.3.4, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-55953
The Erlang/OTP ssl TLS 1.2 (and earlier) and DTLS client does not verify that the cipher suite selected by the server in ServerHello was among the suites offered by the client in ClientHello. The client-side tls_handshake:hello/5 handler validates the negotiated protocol version and the downgrade sentinel but hands the server-chosen suite directly to ssl_handshake:handle_server_hello_extensions/9, which installs it without a membership check. The TLS 1.3 client path performs this check (per RFC 8446), so it is not affected.
An on-path attacker between the client and the intended server can respond with a ServerHello selecting an anonymous key exchange suite such as TLS_DH_anon_* or TLS_ECDH_anon_* that the client never offered. Anonymous suites do not require the server to present a certificate, so the entire verify_peer and cacerts configuration is bypassed: the attacker completes the handshake with its own ephemeral parameters, no certificate is validated, no hostname is checked, and ssl:connect returns {ok, Socket}. All subsequent application traffic is readable and modifiable by the attacker.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, from OTP 28.0 before OTP 28.5.0.4, and from OTP 29.0 before OTP 29.0.4, corresponding to ssl from 5.3.4 before 11.2.12.11, from 11.3 before 11.6.0.4, and from 11.7 before 11.7.4. Whether OTP before OTP 17.0, corresponding to ssl before 5.3.4, is affected is unknown.
🎖@cveNotify
The Erlang/OTP ssl TLS 1.2 (and earlier) and DTLS client does not verify that the cipher suite selected by the server in ServerHello was among the suites offered by the client in ClientHello. The client-side tls_handshake:hello/5 handler validates the negotiated protocol version and the downgrade sentinel but hands the server-chosen suite directly to ssl_handshake:handle_server_hello_extensions/9, which installs it without a membership check. The TLS 1.3 client path performs this check (per RFC 8446), so it is not affected.
An on-path attacker between the client and the intended server can respond with a ServerHello selecting an anonymous key exchange suite such as TLS_DH_anon_* or TLS_ECDH_anon_* that the client never offered. Anonymous suites do not require the server to present a certificate, so the entire verify_peer and cacerts configuration is bypassed: the attacker completes the handshake with its own ephemeral parameters, no certificate is validated, no hostname is checked, and ssl:connect returns {ok, Socket}. All subsequent application traffic is readable and modifiable by the attacker.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, from OTP 28.0 before OTP 28.5.0.4, and from OTP 29.0 before OTP 29.0.4, corresponding to ssl from 5.3.4 before 11.2.12.11, from 11.3 before 11.6.0.4, and from 11.7 before 11.7.4. Whether OTP before OTP 17.0, corresponding to ssl before 5.3.4, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-59250
Classic buffer overflow in the Erlang/OTP megaco flex scanner C driver allows a remote unauthenticated attacker to corrupt the driver's memory (and potentially achieve remote code execution or a denial-of-service crash) by sending a single text-encoded H.248/Megaco message containing an oversized property parm name.
When tokenizing a Local/Remote descriptor, mfs_load_property_groups extracts the attacker-controlled property name (bounded only by the message length) and, when no value follows, formats it into a fixed 512-byte error_msg field of the MfsErlDrvData struct using an unchecked sprintf call. Names longer than roughly 452 bytes overflow into the immediately following struct fields (text_buf, text_ptr, term_spec, term_spec_size, term_spec_index), overwriting live pointers and counters with attacker-chosen bytes. Subsequent scanner code writes and frees through the corrupted pointers, producing arbitrary write and arbitrary free primitives inside the BEAM VM process, which can be leveraged for remote code execution. On builds compiled with _FORTIFY_SOURCE the overflow is detected at runtime and terminates the process with SIGABRT, resulting in denial of service.
The overflow occurs in the flex scanner before any grammar or Megaco-level authentication processing, so exploitation requires only network reachability to the megaco transport port on a node configured with {scanner, flex}.
This vulnerability is associated with program files lib/megaco/src/flex/megaco_flex_scanner_drv.flex.src and program routines mfs_load_property_groups.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, from OTP 28.0 before OTP 28.5.0.4, and from OTP 29.0 before OTP 29.0.4, corresponding to megaco from 3.17.1 before 4.7.2.2, from 4.8 before 4.8.3.1, and from 4.9 before 4.9.1. Whether OTP before OTP 17.0, corresponding to megaco before 3.17.1, is affected is unknown.
🎖@cveNotify
Classic buffer overflow in the Erlang/OTP megaco flex scanner C driver allows a remote unauthenticated attacker to corrupt the driver's memory (and potentially achieve remote code execution or a denial-of-service crash) by sending a single text-encoded H.248/Megaco message containing an oversized property parm name.
When tokenizing a Local/Remote descriptor, mfs_load_property_groups extracts the attacker-controlled property name (bounded only by the message length) and, when no value follows, formats it into a fixed 512-byte error_msg field of the MfsErlDrvData struct using an unchecked sprintf call. Names longer than roughly 452 bytes overflow into the immediately following struct fields (text_buf, text_ptr, term_spec, term_spec_size, term_spec_index), overwriting live pointers and counters with attacker-chosen bytes. Subsequent scanner code writes and frees through the corrupted pointers, producing arbitrary write and arbitrary free primitives inside the BEAM VM process, which can be leveraged for remote code execution. On builds compiled with _FORTIFY_SOURCE the overflow is detected at runtime and terminates the process with SIGABRT, resulting in denial of service.
The overflow occurs in the flex scanner before any grammar or Megaco-level authentication processing, so exploitation requires only network reachability to the megaco transport port on a node configured with {scanner, flex}.
This vulnerability is associated with program files lib/megaco/src/flex/megaco_flex_scanner_drv.flex.src and program routines mfs_load_property_groups.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, from OTP 28.0 before OTP 28.5.0.4, and from OTP 29.0 before OTP 29.0.4, corresponding to megaco from 3.17.1 before 4.7.2.2, from 4.8 before 4.8.3.1, and from 4.9 before 4.9.1. Whether OTP before OTP 17.0, corresponding to megaco before 3.17.1, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-59247
Insufficient Verification of Data Authenticity vulnerability in Gleam allows an adversary in the middle to substitute forged Hex package contents during dependency resolution.
During dependency resolution Gleam fetches package metadata from the signature-verified Hex repository, which covers each release's dependency requirements and SHA-256 outer_checksum. After resolving versions, gleam_cli::dependencies::lookup_package makes a second request to the unsigned Hex API through gleam_core::hex::get_package_release and records the outer_checksum and dependency names from that JSON response into manifest.toml, instead of the values from the verified repository metadata. The Hex repository signature does not cover the API response.
An adversary in the middle who can intercept TLS with a certificate trusted by the Gleam process (for example a TLS-inspecting proxy using a CA in the operating system trust store or added through GLEAM_CACERTS_PATH), and who can modify both the API release response and the corresponding repository tarball, can supply a package archive with a matching forged checksum without the Hex repository signing key. Gleam verifies the forged tarball against the forged checksum, accepts it, and extracts it as a dependency source, resulting in loss of integrity of the downloaded package contents.
Only projects that resolve or update Hex dependencies are affected, which happens when the manifest is missing, a dependency is added or updated, or dependency requirements change. Builds that reuse an unchanged, known-good manifest.toml continue to verify tarballs against its pinned checksum. This issue affects gleam: from 0.18.0 before 1.18.0.
🎖@cveNotify
Insufficient Verification of Data Authenticity vulnerability in Gleam allows an adversary in the middle to substitute forged Hex package contents during dependency resolution.
During dependency resolution Gleam fetches package metadata from the signature-verified Hex repository, which covers each release's dependency requirements and SHA-256 outer_checksum. After resolving versions, gleam_cli::dependencies::lookup_package makes a second request to the unsigned Hex API through gleam_core::hex::get_package_release and records the outer_checksum and dependency names from that JSON response into manifest.toml, instead of the values from the verified repository metadata. The Hex repository signature does not cover the API response.
An adversary in the middle who can intercept TLS with a certificate trusted by the Gleam process (for example a TLS-inspecting proxy using a CA in the operating system trust store or added through GLEAM_CACERTS_PATH), and who can modify both the API release response and the corresponding repository tarball, can supply a package archive with a matching forged checksum without the Hex repository signing key. Gleam verifies the forged tarball against the forged checksum, accepts it, and extracts it as a dependency source, resulting in loss of integrity of the downloaded package contents.
Only projects that resolve or update Hex dependencies are affected, which happens when the manifest is missing, a dependency is added or updated, or dependency requirements change. Builds that reuse an unchanged, known-good manifest.toml continue to verify tarballs against its pinned checksum. This issue affects gleam: from 0.18.0 before 1.18.0.
🎖@cveNotify
🚨 CVE-2026-55951
The Erlang/OTP httpc HTTP client does not enforce a limit on the total size of response headers received from a server. The max_header_size option defaults to nolimit, and httpc_response:parse_headers/6 accumulates every header into a list before the length check runs (which only fires after the terminating CRLF CRLF is received).
A malicious or compromised HTTP server can send an arbitrarily large number of headers, or headers with very large values, causing the client process to allocate unbounded memory until the system runs out of memory or the BEAM VM crashes. A proof-of-concept server sending 100,000 headers of roughly 4000 bytes each caused the client VM to allocate over 13 GB of memory in under 30 seconds.
Any application using httpc:request/4,5 to connect to untrusted servers is affected. No authentication is required: any server the client connects to (including via a redirect or man-in-the-middle) can trigger the exhaustion.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
The Erlang/OTP httpc HTTP client does not enforce a limit on the total size of response headers received from a server. The max_header_size option defaults to nolimit, and httpc_response:parse_headers/6 accumulates every header into a list before the length check runs (which only fires after the terminating CRLF CRLF is received).
A malicious or compromised HTTP server can send an arbitrarily large number of headers, or headers with very large values, causing the client process to allocate unbounded memory until the system runs out of memory or the BEAM VM crashes. A proof-of-concept server sending 100,000 headers of roughly 4000 bytes each caused the client VM to allocate over 13 GB of memory in under 30 seconds.
Any application using httpc:request/4,5 to connect to untrusted servers is affected. No authentication is required: any server the client connects to (including via a redirect or man-in-the-middle) can trigger the exhaustion.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-59696
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP stdlib allows a remote attacker to degrade availability by supplying a URI whose port component is a very long run of digits.
uri_string:get_port/1 passes the port substring to binary_to_integer/1 with no length bound, catching only error:badarg, so a syntactically valid port of up to roughly 1.26 million digits converts successfully and costs the calling process hundreds of milliseconds of arbitrary-precision arithmetic. The conversion is reached from every authority-parsing path in uri_string:parse/1, including the host, registered-name, and IPv4 and IPv6 forms. parse/1 is the documented interface for parsing URIs, so any application that parses an attacker-supplied URI is exposed without further configuration. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 21.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to stdlib from 3.5 before 6.2.2.5, from 7.0 before 7.3.0.2, and from 8.0 before 8.0.4.
🎖@cveNotify
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP stdlib allows a remote attacker to degrade availability by supplying a URI whose port component is a very long run of digits.
uri_string:get_port/1 passes the port substring to binary_to_integer/1 with no length bound, catching only error:badarg, so a syntactically valid port of up to roughly 1.26 million digits converts successfully and costs the calling process hundreds of milliseconds of arbitrary-precision arithmetic. The conversion is reached from every authority-parsing path in uri_string:parse/1, including the host, registered-name, and IPv4 and IPv6 forms. parse/1 is the documented interface for parsing URIs, so any application that parses an attacker-supplied URI is exposed without further configuration. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 21.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to stdlib from 3.5 before 6.2.2.5, from 7.0 before 7.3.0.2, and from 8.0 before 8.0.4.
🎖@cveNotify
🚨 CVE-2026-66357
httpd has never implemented obs-fold (RFC 2616 §2.2 / RFC 7230 §3.2.4 header continuation lines). Every CRLF followed by a non-CRLF octet unconditionally starts a new header. This missing feature became a security concern as the understanding of HTTP request smuggling attacks evolved.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
httpd has never implemented obs-fold (RFC 2616 §2.2 / RFC 7230 §3.2.4 header continuation lines). Every CRLF followed by a non-CRLF octet unconditionally starts a new header. This missing feature became a security concern as the understanding of HTTP request smuggling attacks evolved.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-66835
Path Equivalence vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by prefixing the request path with an extra slash.
httpd_request:validate_uri/1 normalises the request URI with uri_string:normalize/1, which performs RFC 3986 dot-segment removal but does not collapse empty path segments, so a doubled slash survives. mod_alias:real_name/3 concatenates the document root with that URI, and mod_auth:secret_path/3 then decides whether the result lies inside a protected directory block by running the configured directory path as an unanchored regular expression against it. The doubled slash breaks the contiguous substring the regex needs, so the request is treated as unprotected and no authentication challenge is issued, while mod_get opens the same path and the operating system collapses the doubled slash and returns the protected file. The same path mismatch also evades the per-path accounting in mod_security.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Path Equivalence vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by prefixing the request path with an extra slash.
httpd_request:validate_uri/1 normalises the request URI with uri_string:normalize/1, which performs RFC 3986 dot-segment removal but does not collapse empty path segments, so a doubled slash survives. mod_alias:real_name/3 concatenates the document root with that URI, and mod_auth:secret_path/3 then decides whether the result lies inside a protected directory block by running the configured directory path as an unanchored regular expression against it. The doubled slash breaks the contiguous substring the regex needs, so the request is treated as unprotected and no authentication challenge is issued, while mod_get opens the same path and the operating system collapses the doubled slash and returns the protected file. The same path mismatch also evades the per-path accounting in mod_security.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-69664
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending a request with a chunked body whose chunk-size line is not a hexadecimal number. The worker serving the connection is never released and no timeout reclaims it, so repeating the request across connections occupies every available worker and denies service to legitimate clients. No authentication is required and the default configuration is affected.
The chunk-size line must arrive in a write separate from the headers. When the body accompanies the headers, httpd_request_handler:handle_body/3 calls http_chunk:decode/3 inside a try ... catch throw:Error, so the {error, {chunk_size, _}} thrown by http_chunk:decode_size/4 is answered with 400 Bad Request. When the chunk size arrives later, the decoder is resumed through a bare catch in httpd_request_handler:handle_info/2, which converts the throw into a return value rather than raising it; the resulting error tuple is then treated as the next decoder continuation, the socket is re-armed, and the worker waits for data that never comes. The request timeout has already been cancelled at the point the headers were accepted, and the periodic byte-rate check is only armed when minimum_bytes_per_second is configured, which it is not by default.
This issue affects OTP from OTP 18.1.4 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 6.0.3 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending a request with a chunked body whose chunk-size line is not a hexadecimal number. The worker serving the connection is never released and no timeout reclaims it, so repeating the request across connections occupies every available worker and denies service to legitimate clients. No authentication is required and the default configuration is affected.
The chunk-size line must arrive in a write separate from the headers. When the body accompanies the headers, httpd_request_handler:handle_body/3 calls http_chunk:decode/3 inside a try ... catch throw:Error, so the {error, {chunk_size, _}} thrown by http_chunk:decode_size/4 is answered with 400 Bad Request. When the chunk size arrives later, the decoder is resumed through a bare catch in httpd_request_handler:handle_info/2, which converts the throw into a return value rather than raising it; the resulting error tuple is then treated as the next decoder continuation, the socket is re-armed, and the worker waits for data that never comes. The request timeout has already been cancelled at the point the headers were accepted, and the periodic byte-rate check is only armed when minimum_bytes_per_second is configured, which it is not by default.
This issue affects OTP from OTP 18.1.4 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 6.0.3 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
🚨 CVE-2026-70399
Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by opening and holding open a large number of connections. The max_clients option is documented to default to 150, and the inets hardening guide presents that limit as the first layer of denial-of-service defence, but a server that does not set it explicitly accepts an unlimited number of simultaneous connections. Establishing the connections is sufficient; no valid request and no authentication are required.
The accept gate in httpd_manager:handle_new_connection/4 reads the option with httpd_util:lookup/2, which returns undefined when the key is absent, rather than the three-argument form carrying the 150 default that the neighbouring get_ustate/2 uses. Erlang term ordering places every integer before every atom, so the Count =< Max guard holds for any connection count and the server never returns {reject, busy}. Each accepted connection occupies a worker process and a socket for as long as it is held, driving the node towards process, memory and file descriptor exhaustion. Servers that set max_clients explicitly are unaffected, because a configured value is applied as intended.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by opening and holding open a large number of connections. The max_clients option is documented to default to 150, and the inets hardening guide presents that limit as the first layer of denial-of-service defence, but a server that does not set it explicitly accepts an unlimited number of simultaneous connections. Establishing the connections is sufficient; no valid request and no authentication are required.
The accept gate in httpd_manager:handle_new_connection/4 reads the option with httpd_util:lookup/2, which returns undefined when the key is absent, rather than the three-argument form carrying the 150 default that the neighbouring get_ustate/2 uses. Erlang term ordering places every integer before every atom, so the Count =< Max guard holds for any connection count and the server never returns {reject, busy}. Each accepted connection occupies a worker process and a socket for as long as it is held, driving the node towards process, memory and file descriptor exhaustion. Servers that set max_clients explicitly are unaffected, because a configured value is applied as intended.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
🚨 CVE-2026-70405
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP snmp allows a remote attacker to degrade availability by sending an SNMP message containing a BER INTEGER whose length field is arbitrarily large.
snmp_pdus:dec_integer_notag/1 defaults its size limit to infinity, and do_dec_integer_notag/2 then accumulates the value across every declared byte with a recursive shift and bitwise or. Work grows superlinearly in the declared length because each operation acts on a progressively larger bignum. The size-limited variant dec_integer_notag/2 exists but is reached from only one call site, dec_snmp_version/1, which bounds the version field to ten bytes; the request identifier, error status and index, generic and specific trap fields, engine boots and time, and every varbind value decoded by dec_value/1 all use the unbounded form. The decode runs before the PDU is processed, so no valid request is required beyond what the deployment demands to accept the message at all.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to snmp from 4.25.1 before 5.18.2.1, from 5.19 before 5.20.2.2, and from 5.20.3 before 5.20.5. Whether OTP before OTP 17.0, corresponding to snmp before 4.25.1, is affected is unknown.
🎖@cveNotify
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP snmp allows a remote attacker to degrade availability by sending an SNMP message containing a BER INTEGER whose length field is arbitrarily large.
snmp_pdus:dec_integer_notag/1 defaults its size limit to infinity, and do_dec_integer_notag/2 then accumulates the value across every declared byte with a recursive shift and bitwise or. Work grows superlinearly in the declared length because each operation acts on a progressively larger bignum. The size-limited variant dec_integer_notag/2 exists but is reached from only one call site, dec_snmp_version/1, which bounds the version field to ten bytes; the request identifier, error status and index, generic and specific trap fields, engine boots and time, and every varbind value decoded by dec_value/1 all use the unbounded form. The decode runs before the PDU is processed, so no valid request is required beyond what the deployment demands to accept the message at all.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to snmp from 4.25.1 before 5.18.2.1, from 5.19 before 5.20.2.2, and from 5.20.3 before 5.20.5. Whether OTP before OTP 17.0, corresponding to snmp before 4.25.1, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-70409
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP eldap allows a malicious or compromised LDAP server to degrade availability by returning a referral URL whose port component is a very long run of digits.
eldap:parse_port/2 passes the port substring straight to list_to_integer/1 with no length bound. The surrounding try ... catch only rejects a value that fails to parse, so a syntactically valid port of up to roughly 1.26 million digits converts successfully and costs the caller hundreds of milliseconds of arbitrary-precision arithmetic per referral. The conversion function itself is documented to accept integers of any size, so bounding the input is the caller's responsibility. Reaching the flaw requires the application to pass a server-supplied referral to eldap:parse_ldap_url/1, which eldap never calls itself: referral strings are returned to the caller unparsed.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to eldap from 1.0.3 before 1.2.14.2, from 1.2.15 before 1.2.16.1, and from 1.3 before 1.3.1.
🎖@cveNotify
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP eldap allows a malicious or compromised LDAP server to degrade availability by returning a referral URL whose port component is a very long run of digits.
eldap:parse_port/2 passes the port substring straight to list_to_integer/1 with no length bound. The surrounding try ... catch only rejects a value that fails to parse, so a syntactically valid port of up to roughly 1.26 million digits converts successfully and costs the caller hundreds of milliseconds of arbitrary-precision arithmetic per referral. The conversion function itself is documented to accept integers of any size, so bounding the input is the caller's responsibility. Reaching the flaw requires the application to pass a server-supplied referral to eldap:parse_ldap_url/1, which eldap never calls itself: referral strings are returned to the caller unparsed.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to eldap from 1.0.3 before 1.2.14.2, from 1.2.15 before 1.2.16.1, and from 1.3 before 1.3.1.
🎖@cveNotify
🚨 CVE-2026-71380
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete.
httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete.
httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-71562
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP inets httpc allows a malicious or compromised HTTP server to degrade availability by returning a numeric header whose value is a very long run of digits.
httpc_handler.erl converts the server-supplied Content-Length with list_to_integer/1 before comparing it against max_body_size, so the size check cannot protect the conversion, and the option defaults to nolimit in any case. The same unbounded conversion appears in httpc_response:format_response/1 for Content-Length and in httpc_response:get_ms_from_retry_after/1 for Retry-After, which is guarded only by a check that the first character is a digit. A value of up to roughly 1.26 million digits converts successfully and costs the requesting process hundreds of milliseconds of arbitrary-precision arithmetic per response. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP inets httpc allows a malicious or compromised HTTP server to degrade availability by returning a numeric header whose value is a very long run of digits.
httpc_handler.erl converts the server-supplied Content-Length with list_to_integer/1 before comparing it against max_body_size, so the size check cannot protect the conversion, and the option defaults to nolimit in any case. The same unbounded conversion appears in httpc_response:format_response/1 for Content-Length and in httpc_response:get_ms_from_retry_after/1 for Retry-After, which is guarded only by a check that the first character is a digit. A value of up to roughly 1.26 million digits converts successfully and costs the requesting process hundreds of milliseconds of arbitrary-precision arithmetic per response. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-73270
Improper Handling of Case Sensitivity vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by requesting them with different casing, on deployments whose filesystem is case-insensitive.
mod_auth:secret_path/3 decides whether a resolved filesystem path lies inside a protected directory block by running the configured directory path through re:run/3 without the caseless option. A request for /secret/file against a directory configured as /Secret therefore does not match, so the request is treated as unprotected and no authentication challenge is issued, while the filesystem resolves the differently cased path to the same file and mod_get serves it. Deployments on case-sensitive filesystems are unaffected, because there the filesystem itself rejects the mismatched casing.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Improper Handling of Case Sensitivity vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by requesting them with different casing, on deployments whose filesystem is case-insensitive.
mod_auth:secret_path/3 decides whether a resolved filesystem path lies inside a protected directory block by running the configured directory path through re:run/3 without the caseless option. A request for /secret/file against a directory configured as /Secret therefore does not match, so the request is treated as unprotected and no authentication challenge is issued, while the filesystem resolves the differently cased path to the same file and mod_get serves it. Deployments on case-sensitive filesystems are unaffected, because there the filesystem itself rejects the mismatched casing.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-73812
httpd function check_header/3 rejects duplicate Content-Length (per CVE-2026-23941) but never checks for the TE+CL co-presence that RFC 9112 §6.3 identifies as a probable smuggling attempt. handle_body/3 frames by chunked and silently discards Content-Length. A CL-preferring front-end paired with chunked-preferring inets creates a classic CL.TE front-end/back-end desync.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
httpd function check_header/3 rejects duplicate Content-Length (per CVE-2026-23941) but never checks for the TE+CL co-presence that RFC 9112 §6.3 identifies as a probable smuggling attempt. handle_body/3 frames by chunked and silently discards Content-Length. A CL-preferring front-end paired with chunked-preferring inets creates a classic CL.TE front-end/back-end desync.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-74835
The inets application HTTP server httpd fails to enforce a configured body-size limit on chunked request.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
The inets application HTTP server httpd fails to enforce a configured body-size limit on chunked request.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-44756
A memory safety vulnerability exists in the Extended Passport Protocol (EPP) processing library. Under specific conditions, an unauthenticated attacker could exploit a crafted network request containing a malformed EPP header, potentially resulting in undefined behavior and abnormal program termination. Successful exploitation may have a high impact on the confidentiality, integrity, and availability of the application.
🎖@cveNotify
A memory safety vulnerability exists in the Extended Passport Protocol (EPP) processing library. Under specific conditions, an unauthenticated attacker could exploit a crafted network request containing a malformed EPP header, potentially resulting in undefined behavior and abnormal program termination. Successful exploitation may have a high impact on the confidentiality, integrity, and availability of the application.
🎖@cveNotify
🚨 CVE-2026-44766
SAP S/4HANA (Intercompany Matching and Reconciliation) allows a low-privileged authenticated user to inject malicious input into certain functions, which may be processed by the database without proper validation. This could allow the user to access sensitive information, resulting in high impact on confidentiality, with no impact on integrity and availability of the application.
🎖@cveNotify
SAP S/4HANA (Intercompany Matching and Reconciliation) allows a low-privileged authenticated user to inject malicious input into certain functions, which may be processed by the database without proper validation. This could allow the user to access sensitive information, resulting in high impact on confidentiality, with no impact on integrity and availability of the application.
🎖@cveNotify
🚨 CVE-2026-58234
SAP Process Integration (SOAP Adapter) allows a privileged user to send specially crafted requests containing deeply nested entity definitions, which under certain conditions could temporarily increase processor load and degrade system responsiveness. Successful exploitation results in low impact on availability with no impact on confidentiality and integrity.
🎖@cveNotify
SAP Process Integration (SOAP Adapter) allows a privileged user to send specially crafted requests containing deeply nested entity definitions, which under certain conditions could temporarily increase processor load and degrade system responsiveness. Successful exploitation results in low impact on availability with no impact on confidentiality and integrity.
🎖@cveNotify
🚨 CVE-2026-58240
SAP NetWeaver Message Server does not sufficiently validate the authenticity of internal application server components during registration. An unauthenticated attacker with network access to the affected service could exploit this weakness to register an unauthorized component and potentially perform unauthorized actions within the application environment, resulting in a high impact on the confidentiality, integrity, and availability of the affected system.
🎖@cveNotify
SAP NetWeaver Message Server does not sufficiently validate the authenticity of internal application server components during registration. An unauthenticated attacker with network access to the affected service could exploit this weakness to register an unauthorized component and potentially perform unauthorized actions within the application environment, resulting in a high impact on the confidentiality, integrity, and availability of the affected system.
🎖@cveNotify