🚨 CVE-2026-46579
A flaw was found in the OpenShift Router. When a Route has `insecureEdgeTerminationPolicy` set to Allow, the HTTP frontend does not remove `X-SSL-Client-*` headers from incoming requests. This allows an unauthenticated attacker to send plain HTTP requests with crafted `X-SSL-Client-*` headers. As a result, backends relying on these headers for mutual TLS (Transport Layer Security) authentication can be bypassed, enabling the attacker to impersonate client certificate identities.
🎖@cveNotify
A flaw was found in the OpenShift Router. When a Route has `insecureEdgeTerminationPolicy` set to Allow, the HTTP frontend does not remove `X-SSL-Client-*` headers from incoming requests. This allows an unauthenticated attacker to send plain HTTP requests with crafted `X-SSL-Client-*` headers. As a result, backends relying on these headers for mutual TLS (Transport Layer Security) authentication can be bypassed, enabling the attacker to impersonate client certificate identities.
🎖@cveNotify
🚨 CVE-2026-16242
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
🎖@cveNotify
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
🎖@cveNotify
🚨 CVE-2026-49332
A flaw was found in openshift/oauth-proxy. The proxy sets authenticated identity headers using only dash-variant keys (X-Forwarded-User) but does not strip underscore-variant keys (X_Forwarded_User) from incoming requests. WSGI and PHP frameworks normalize both variants to the same variable, allowing an authenticated low-privilege user to smuggle a forged identity that may override the legitimate authenticated identity in the upstream application.
🎖@cveNotify
A flaw was found in openshift/oauth-proxy. The proxy sets authenticated identity headers using only dash-variant keys (X-Forwarded-User) but does not strip underscore-variant keys (X_Forwarded_User) from incoming requests. WSGI and PHP frameworks normalize both variants to the same variable, allowing an authenticated low-privilege user to smuggle a forged identity that may override the legitimate authenticated identity in the upstream application.
🎖@cveNotify
🚨 CVE-2026-82750
Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to inflate the fee-payer's gas cost per sponsored payment by a large multiplier and to have the sponsor pay for EIP-7702 account delegations of the client's choosing.
When the server sponsors Tempo payments, MPP.Methods.Tempo.FeePayerPolicy.measure/3 in lib/mpp/methods/tempo/fee_payer_policy.ex bounds the gas fields, the fee budget, the validity window and the access list of the client-signed 0x76 envelope, but never reads its aa_authorization_list field. Every signed delegation in that list is charged as intrinsic gas before the payment call runs, so a client attaching delegations from throwaway authority keys makes the sponsor pay for them within the default gas_limit ceiling. At the reporter's default of seven entries the sponsored cost rises from about 46,575 gas to about 1,884,087 gas. Because each entry is applied as a persistent set-code delegation, a client can also upgrade its own accounts to delegated code at the sponsor's expense.
This issue affects mpp: from 0.2.0 before 0.16.1.
🎖@cveNotify
Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to inflate the fee-payer's gas cost per sponsored payment by a large multiplier and to have the sponsor pay for EIP-7702 account delegations of the client's choosing.
When the server sponsors Tempo payments, MPP.Methods.Tempo.FeePayerPolicy.measure/3 in lib/mpp/methods/tempo/fee_payer_policy.ex bounds the gas fields, the fee budget, the validity window and the access list of the client-signed 0x76 envelope, but never reads its aa_authorization_list field. Every signed delegation in that list is charged as intrinsic gas before the payment call runs, so a client attaching delegations from throwaway authority keys makes the sponsor pay for them within the default gas_limit ceiling. At the reporter's default of seven entries the sponsored cost rises from about 46,575 gas to about 1,884,087 gas. Because each entry is applied as a persistent set-code delegation, a client can also upgrade its own accounts to delegated code at the sponsor's expense.
This issue affects mpp: from 0.2.0 before 0.16.1.
🎖@cveNotify
🚨 CVE-2026-82751
Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to inflate the fee-payer's gas cost per sponsored payment by a large multiplier and to have the sponsor pay for provisioning an access key on the client's own account.
When the server sponsors Tempo payments, MPP.Methods.Tempo.FeePayerPolicy.measure/3 in lib/mpp/methods/tempo/fee_payer_policy.ex bounds the gas fields, the fee budget, the validity window and the access list of the client-signed 0x76 envelope, but does not check whether the envelope carries the optional key_authorization field. A client can attach a fully signed key authorization, provisioning a new access key with token spending limits on its own account, alongside the normal payment call. The key and each limit entry are persistent storage writes billed as intrinsic gas to the sponsor, bounded only by the gas_limit ceiling. At the reporter's default of one key with three token limits the sponsored cost rises from about 46,587 gas to about 1,808,700 gas, and the client keeps a valid access key it paid nothing for.
This issue affects mpp: from 0.2.0 before 0.16.1.
🎖@cveNotify
Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to inflate the fee-payer's gas cost per sponsored payment by a large multiplier and to have the sponsor pay for provisioning an access key on the client's own account.
When the server sponsors Tempo payments, MPP.Methods.Tempo.FeePayerPolicy.measure/3 in lib/mpp/methods/tempo/fee_payer_policy.ex bounds the gas fields, the fee budget, the validity window and the access list of the client-signed 0x76 envelope, but does not check whether the envelope carries the optional key_authorization field. A client can attach a fully signed key authorization, provisioning a new access key with token spending limits on its own account, alongside the normal payment call. The key and each limit entry are persistent storage writes billed as intrinsic gas to the sponsor, bounded only by the gas_limit ceiling. At the reporter's default of one key with three token limits the sponsored cost rises from about 46,587 gas to about 1,808,700 gas, and the client keeps a valid access key it paid nothing for.
This issue affects mpp: from 0.2.0 before 0.16.1.
🎖@cveNotify
🚨 CVE-2026-46579
A flaw was found in the OpenShift Router. When a Route has `insecureEdgeTerminationPolicy` set to Allow, the HTTP frontend does not remove `X-SSL-Client-*` headers from incoming requests. This allows an unauthenticated attacker to send plain HTTP requests with crafted `X-SSL-Client-*` headers. As a result, backends relying on these headers for mutual TLS (Transport Layer Security) authentication can be bypassed, enabling the attacker to impersonate client certificate identities.
🎖@cveNotify
A flaw was found in the OpenShift Router. When a Route has `insecureEdgeTerminationPolicy` set to Allow, the HTTP frontend does not remove `X-SSL-Client-*` headers from incoming requests. This allows an unauthenticated attacker to send plain HTTP requests with crafted `X-SSL-Client-*` headers. As a result, backends relying on these headers for mutual TLS (Transport Layer Security) authentication can be bypassed, enabling the attacker to impersonate client certificate identities.
🎖@cveNotify
🚨 CVE-2026-16242
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
🎖@cveNotify
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
🎖@cveNotify
🚨 CVE-2026-49332
A flaw was found in openshift/oauth-proxy. The proxy sets authenticated identity headers using only dash-variant keys (X-Forwarded-User) but does not strip underscore-variant keys (X_Forwarded_User) from incoming requests. WSGI and PHP frameworks normalize both variants to the same variable, allowing an authenticated low-privilege user to smuggle a forged identity that may override the legitimate authenticated identity in the upstream application.
🎖@cveNotify
A flaw was found in openshift/oauth-proxy. The proxy sets authenticated identity headers using only dash-variant keys (X-Forwarded-User) but does not strip underscore-variant keys (X_Forwarded_User) from incoming requests. WSGI and PHP frameworks normalize both variants to the same variable, allowing an authenticated low-privilege user to smuggle a forged identity that may override the legitimate authenticated identity in the upstream application.
🎖@cveNotify
🚨 CVE-2026-13608
A flaw in the libcurl SASL negotiation for LDAP authentication allows an
incomplete handshake sequence to be misinterpreted as a successful
cryptographic verification. An attacker executing a Man-in-the-Middle (MITM)
attack can inject a premature or shortcut response that bypasses complete peer
validation.
🎖@cveNotify
A flaw in the libcurl SASL negotiation for LDAP authentication allows an
incomplete handshake sequence to be misinterpreted as a successful
cryptographic verification. An attacker executing a Man-in-the-Middle (MITM)
attack can inject a premature or shortcut response that bypasses complete peer
validation.
🎖@cveNotify
🚨 CVE-2026-18924
A flaw in libcurl's handling of HTTP/2 Server Push streams, when the parent
handle is set to share connections with other handles, can lead to
use-after-free in the cleanup process.
🎖@cveNotify
A flaw in libcurl's handling of HTTP/2 Server Push streams, when the parent
handle is set to share connections with other handles, can lead to
use-after-free in the cleanup process.
🎖@cveNotify
🚨 CVE-2026-19931
A flaw in libcurl makes it wrongly reuse an HTTP connection setup for a given
hostname using Negotiate authentication, when the initial request is done
using empty credentials. This can make user B's request get sent over user A's
previously authenticated connection.
🎖@cveNotify
A flaw in libcurl makes it wrongly reuse an HTTP connection setup for a given
hostname using Negotiate authentication, when the initial request is done
using empty credentials. This can make user B's request get sent over user A's
previously authenticated connection.
🎖@cveNotify
🚨 CVE-2026-80229
When performing transfers via libcurl’s multi interface, pooled TLS
connections can outlive their originating easy handles. In OpenSSL 3 provider
configurations, libcurl attaches an allocated library context to the easy
handle's state and passes it to OpenSSL without acquiring an ownership
reference; destroying the easy handle prematurely frees this context while the
active connection retains a dangling pointer, leading to a heap-use-after-free
upon subsequent I/O or post-handshake operations.
🎖@cveNotify
When performing transfers via libcurl’s multi interface, pooled TLS
connections can outlive their originating easy handles. In OpenSSL 3 provider
configurations, libcurl attaches an allocated library context to the easy
handle's state and passes it to OpenSSL without acquiring an ownership
reference; destroying the easy handle prematurely frees this context while the
active connection retains a dangling pointer, leading to a heap-use-after-free
upon subsequent I/O or post-handshake operations.
🎖@cveNotify
🚨 CVE-2026-80230
When `CURLOPT_PINNEDPUBLICKEY` is configured alongside options that disable
standard peer verification (`CURLOPT_SSL_VERIFYPEER = 0` and
`CURLOPT_SSL_VERIFYHOST = 0`), libcurl fails to enforce public key pinning on
connections established without a presented server certificate. Bypassing the
pinning check under these disabled-verification conditions allows
unauthenticated connections to succeed when they should be rejected.
🎖@cveNotify
When `CURLOPT_PINNEDPUBLICKEY` is configured alongside options that disable
standard peer verification (`CURLOPT_SSL_VERIFYPEER = 0` and
`CURLOPT_SSL_VERIFYHOST = 0`), libcurl fails to enforce public key pinning on
connections established without a presented server certificate. Bypassing the
pinning check under these disabled-verification conditions allows
unauthenticated connections to succeed when they should be rejected.
🎖@cveNotify
🚨 CVE-2026-80231
A flaw in libcurl makes it wrongly reuse an existing HTTPS connection setup
for a given hostname even when using a different Native CA Store setting
(`CURLSSLOPT_NATIVE_CA`) than when the connection was created.
🎖@cveNotify
A flaw in libcurl makes it wrongly reuse an existing HTTPS connection setup
for a given hostname even when using a different Native CA Store setting
(`CURLSSLOPT_NATIVE_CA`) than when the connection was created.
🎖@cveNotify
🚨 CVE-2026-80255
A `Set-Cookie:` header using tab (horizontal tab, ASCII code 9) instead of
space (ascii code 32) immediately before the `Secure` attribute causes curl to
store the cookie without its Secure flag. The cookie might then wrongfully be
sent over plaintext HTTP on subsequent requests to the same host.
🎖@cveNotify
A `Set-Cookie:` header using tab (horizontal tab, ASCII code 9) instead of
space (ascii code 32) immediately before the `Secure` attribute causes curl to
store the cookie without its Secure flag. The cookie might then wrongfully be
sent over plaintext HTTP on subsequent requests to the same host.
🎖@cveNotify
🚨 CVE-2026-82208
With the wolfSSL backend, when CA caching is enabled and an
`CURLOPT_SSL_CTX_FUNCTION` callback replaces the trust store, libcurl can
silently reinstall the cached store after the callback returns. A certificate
trusted by the cached store but rejected by the callback-selected store is
then incorrectly accepted.
🎖@cveNotify
With the wolfSSL backend, when CA caching is enabled and an
`CURLOPT_SSL_CTX_FUNCTION` callback replaces the trust store, libcurl can
silently reinstall the cached store after the callback returns. A certificate
trusted by the cached store but rejected by the callback-selected store is
then incorrectly accepted.
🎖@cveNotify
🚨 CVE-2026-82209
When libpsl support is enabled, libcurl fails to enforce the Public Suffix
List boundary check when processing a `Set-Cookie` header where the `Domain`
attribute explicitly matches an origin host that is itself a public suffix
(e.g., `Domain=co.uk` set by `co.uk`).
Instead of coercing it into a strict host-only cookie, libcurl saves the
cookie with wildcard domain scope (`.co.uk`). Consequently, the cookie is
inappropriately included in subsequent outbound requests or HTTP redirects to
arbitrary sibling subdomains under the same public suffix (e.g.,
`attacker.co.uk`).
🎖@cveNotify
When libpsl support is enabled, libcurl fails to enforce the Public Suffix
List boundary check when processing a `Set-Cookie` header where the `Domain`
attribute explicitly matches an origin host that is itself a public suffix
(e.g., `Domain=co.uk` set by `co.uk`).
Instead of coercing it into a strict host-only cookie, libcurl saves the
cookie with wildcard domain scope (`.co.uk`). Consequently, the cookie is
inappropriately included in subsequent outbound requests or HTTP redirects to
arbitrary sibling subdomains under the same public suffix (e.g.,
`attacker.co.uk`).
🎖@cveNotify
🚨 CVE-2026-86219
Authen::SASL::Perl::DIGEST_MD5 versions before 2.2100 for Perl accept replayed authentication responses via unverified nonce in server_step.
server_start generates a fresh nonce and sends it in the challenge, and nothing later compares that value against the nonce the client returns. server_step derives the expected digest from the client's own parameters, so a response verifies whenever its digest matches the nonce it carries. The count table it also checks is keyed on the client-supplied nonce and starts empty in each new server object, so a captured first response, carrying `nc=00000001`, passes that too. RFC 2831 defines the nonce in the response as the value the server sent in the preceding challenge.
An attacker who observes one successful `qop=auth` exchange can replay the captured response against a later session for the same service, host, realm and user, and authenticate as that user without knowing the password.
🎖@cveNotify
Authen::SASL::Perl::DIGEST_MD5 versions before 2.2100 for Perl accept replayed authentication responses via unverified nonce in server_step.
server_start generates a fresh nonce and sends it in the challenge, and nothing later compares that value against the nonce the client returns. server_step derives the expected digest from the client's own parameters, so a response verifies whenever its digest matches the nonce it carries. The count table it also checks is keyed on the client-supplied nonce and starts empty in each new server object, so a captured first response, carrying `nc=00000001`, passes that too. RFC 2831 defines the nonce in the response as the value the server sent in the preceding challenge.
An attacker who observes one successful `qop=auth` exchange can replay the captured response against a later session for the same service, host, realm and user, and authenticate as that user without knowing the password.
🎖@cveNotify
IETF Datatracker
RFC 2831: Using Digest Authentication as a SASL Mechanism
This specification defines how HTTP Digest Authentication can be used as a SASL mechanism for any protocol that has a SASL (Simple Authentication and Security Layer) profile. [STANDARDS-TRACK]
🚨 CVE-2026-86220
A vulnerability was detected in SourceCodester Class and Exam Timetabling System 1.0. The affected element is the function mysqli_query of the file /admin/modal_add_course.php. The manipulation of the argument course results in sql injection. The attack can be launched remotely. The exploit is now public and may be used.
🎖@cveNotify
A vulnerability was detected in SourceCodester Class and Exam Timetabling System 1.0. The affected element is the function mysqli_query of the file /admin/modal_add_course.php. The manipulation of the argument course results in sql injection. The attack can be launched remotely. The exploit is now public and may be used.
🎖@cveNotify
GitHub
sourcecodester Class and Exam Timetabling System Project V1.0 /modal_add_course.php SQL injection · Issue #1 · justconter/cve
sourcecodester Class and Exam Timetabling System Project V1.0 /modal_add_course.php SQL injection NAME OF AFFECTED PRODUCT(S) Class and Exam Timetabling System Vendor Homepage https://www.sourcecod...
🚨 CVE-2026-75569
A flaw was found in mce-operator-bundle. The build process fetches and executes scripts from a remote repository without performing integrity checks, such as commit pinning or signature verification. This allows a malicious actor with write access to the remote repository to inject and execute arbitrary code during the build. The consequence is a compromised build process, potentially leading to the distribution of malicious software.
🎖@cveNotify
A flaw was found in mce-operator-bundle. The build process fetches and executes scripts from a remote repository without performing integrity checks, such as commit pinning or signature verification. This allows a malicious actor with write access to the remote repository to inject and execute arbitrary code during the build. The consequence is a compromised build process, potentially leading to the distribution of malicious software.
🎖@cveNotify
🚨 CVE-2026-86221
A flaw has been found in SourceCodester Class and Exam Timetabling System 1.0. The impacted element is the function mysqli_query of the file /admin/modal_add_course1.php. This manipulation of the argument course causes sql injection. The attack may be initiated remotely. The exploit has been published and may be used.
🎖@cveNotify
A flaw has been found in SourceCodester Class and Exam Timetabling System 1.0. The impacted element is the function mysqli_query of the file /admin/modal_add_course1.php. This manipulation of the argument course causes sql injection. The attack may be initiated remotely. The exploit has been published and may be used.
🎖@cveNotify
GitHub
sourcecodester Class and Exam Timetabling System Project V1.0 /modal_add_course1.php SQL injection · Issue #2 · justconter/cve
sourcecodester Class and Exam Timetabling System Project V1.0 /modal_add_course1.php SQL injection NAME OF AFFECTED PRODUCT(S) Class and Exam Timetabling System Vendor Homepage https://www.sourceco...