🚨 CVE-2026-3012
A flaw was found in Samba’s certificate auto-enrollment Group Policy handling. When certificate auto-enrollment is enabled, Samba may retrieve a CA certificate over an unencrypted HTTP connection and install it into the local trust store without proper verification. An attacker with the ability to intercept or redirect network traffic could exploit this behavior to supply a malicious certificate authority certificate, potentially allowing interception or spoofing of trusted communications.

🎖@cveNotify

🚨 CVE-2026-1933
A flaw was found in Samba’s handling of NTFS-style reparse points on shares configured with read only = yes. Due to missing SMB-layer access checks, authenticated users with underlying filesystem write permissions may create or delete reparse point metadata through SMB operations even on read-only exports. This could allow modification of SMB-visible file behavior, including converting files into symbolic links or other reparse point types.

🎖@cveNotify

🚨 CVE-2026-45984
In the Linux kernel, the following vulnerability has been resolved:

gfs2: Fix use-after-free in iomap inline data write path

The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.

The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory

Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.

Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.

[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]

🎖@cveNotify

🚨 CVE-2026-4408
A flaw was found in Samba. A remote attacker can exploit a misconfiguration in Samba file servers and classic domain controllers that use the "check password script" feature. If this script is configured with the %u substitution character, the client-controlled username is passed without proper escaping of shell meta-characters. This vulnerability allows an attacker to achieve remote command execution on the affected system. This issue primarily affects non-standard configurations where the "check password script" is used with %u and the samba-dcerpcd service is started as a system service.

🎖@cveNotify

🚨 CVE-2024-52011
launch-editor allows users to open files with line numbers in editor from Node.js. Prior to version 2.9.0, due to the insufficient sanitization of the `file` argument in the `launchEditor`, an attacker can execute arbitrary commands on Windows by supplying a filename that contains special characters. This issue has been fixed in the `launch-editor` version 2.9.0, corresponding to vite version 5.4.9.

🎖@cveNotify

🚨 CVE-2026-34993
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.14.0, using ``CookieJar.load()`` with untrusted input may allow arbitrary code execution. Most applications using this function will be doing so with the user's own data, so this is unlikely to affect many applications. Version 3.14.0 patches the issue. If an application does allow attacker controlled files to be loaded, a workaround on older releases would be to sanitize the files before loading.

🎖@cveNotify

🚨 CVE-2026-27145
(*x509.Certificate).VerifyHostname previously called matchHostnames in a loop over all DNS Subject Alternative Name (SAN) entries. This caused strings.Split(host, ".") to execute repeatedly on the same input hostname. With a large DNS SAN list, verification costs scaled quadratically based on the number of SAN entries multiplied by the hostname's label count. Because x509.Verify validates hostnames before building the certificate chain, this overhead occurred even for untrusted certificates.

🎖@cveNotify

🚨 CVE-2026-11332
A flaw was found in ansible-core. The ansible-galaxy role install command processes dependency specifications from a role's meta/requirements.yml file. Due to improper neutralization of argument delimiters, a malicious role author can inject arbitrary git configuration flags through the src field. This allows arbitrary code execution on the machine of a user who installs the role via ansible-galaxy role install.

🎖@cveNotify

🚨 CVE-2025-10263
Arm C1-Ultra, C1-Premium, Neoverse V3 & V3AE, Neoverse V2, Neoverse V1, Neoverse-N2, Neoverse-N1, Cortex-X925, Cortex-X4, Cortex-X3, Cortex-X2, Cortex-X1 & X1C, Cortex-A710, Cortex-A78, A78AE & A78C, Cortex-A77, Cortex-A76 & A76A may allow writes to resources owned by a higher exception level.

🎖@cveNotify

🚨 CVE-2026-45447
Issue summary: A specially crafted PKCS#7 or S/MIME signed message could
trigger a use-after-free during PKCS#7 signature verification.

Impact summary: A use-after-free may result in process crashes, heap
corruption, or potentially remote code execution.

When processing a PKCS#7 or S/MIME signed message, if the SignedData
digestAlgorithms field is present as an empty ASN.1 SET, OpenSSL may
incorrectly free a caller-owned BIO during PKCS7_verify(). A subsequent
use of the BIO by the calling application results in a use-after-free
condition.

In the common case this occurs when the application later calls
BIO_free() on the BIO originally passed to PKCS7_verify(). Depending
on allocator behavior and application-specific BIO usage patterns, this
may result in a crash or other memory corruption. In some application
contexts this may potentially be exploitable for remote code execution.

Applications that process PKCS#7 or S/MIME signed messages using OpenSSL
PKCS#7 APIs may be affected. Applications using the CMS APIs for this
processing are not affected.

The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary.

🎖@cveNotify

🚨 CVE-2026-46625
JavaScript Cookie is a JavaScript API for handling cookies, client-side. Prior to version 3.0.7, js-cookie's internal assign() helper copies properties with for...in + plain assignment. When the source object is produced by JSON.parse, the JSON object's "__proto__" member is an own enumerable property, so the for…in enumerates it and the target[key] = source[key] write triggers the Object.prototype.__proto__ setter on the fresh target ({}). The result is a per-instance prototype hijack: Object.prototype itself is untouched, but the merged attributes object now inherits attacker-controlled keys. Because the consuming set() function then enumerates the merged object with another for...in, every key the attacker placed on the polluted prototype lands in the resulting Set-Cookie string as an attribute pair. The attacker can set domain=, secure=, samesite=, expires=, and path= on cookies whose attributes the developer thought were locked down. This issue has been patched in version 3.0.7.

🎖@cveNotify

🚨 CVE-2026-47162
Vim is an open source, command line text editor. Prior to version 9.2.0495, a Vimscript code injection vulnerability exists in s:NetrwBookHistSave() in the netrw plugin (runtime/pack/dist/opt/netrw/autoload/netrw.vim) when serializing browsed directory paths to the history file ~/.vim/.netrwhist. A directory name derived from the filesystem is interpolated into a single-quoted Vimscript string literal without escaping embedded single quotes, allowing a crafted directory name to break out of the string context and execute arbitrary Vimscript, including shell commands via system() and :!, the next time the history file is sourced. This issue has been patched in version 9.2.0495.

🎖@cveNotify

🚨 CVE-2026-45416
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SslClientHelloHandler.decode() reads the 24-bit TLS handshake length and, when the ClientHello does not fit in the first record, eagerly allocates `ctx.alloc().buffer(handshakeLength)` (line 161). The guard at line 140 is `handshakeLength > maxClientHelloLength && maxClientHelloLength != 0`, and the commonly-used SniHandler/AbstractSniHandler constructors (SniHandler(Mapping), SniHandler(AsyncMapping), AbstractSniHandler()) pass maxClientHelloLength=0 and handshakeTimeoutMillis=0, so the length guard is disabled and no timeout is scheduled. A 16 MiB request exceeds the default pooled chunk size and becomes a huge/unpooled allocation performed immediately. The buffer is retained in the handler until the channel closes. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-45674
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's DnsResolveContext fails to validate the origin (bailiwick) of CNAME records in DNS responses. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-50010
Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SimpleTrustManagerFactory.engineGetTrustManagers() and related paths wrap any user-supplied plain X509TrustManager in X509TrustManagerWrapper, which extends X509ExtendedTrustManager but implements the 3-arg checkServerTrusted(chain, authType, SSLEngine) by discarding the SSLEngine and calling the 2-arg delegate. Because the object now IS an X509ExtendedTrustManager, neither SunJSSE's internal AbstractTrustManagerWrapper nor Netty's own OpenSslX509TrustManagerWrapper will re-wrap it to add endpoint-identification. Consequently, even though Netty 4.2 sets endpointIdentificationAlgorithm="HTTPS" by default, a client built with `SslContextBuilder.forClient().trustManager(somePlainX509TrustManager)` performs no hostname verification at all. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

🎖@cveNotify

🚨 CVE-2026-12143
form-data is a library for creating readable multipart/form-data streams. In versions through 4.0.5, the `field` argument to `FormData#append` and the `filename` option are concatenated verbatim into the `Content-Disposition` header without escaping carriage return (CR), line feed (LF), or double-quote (") characters. An application that passes attacker-controlled data as a field name or filename (for example, an API gateway that turns JSON object keys into multipart field names) allows the attacker to terminate the header line and inject additional headers, or to smuggle entire additional multipart parts, into the request the application forwards to a backend. This can let the attacker add or override form fields (e.g. set `is_admin=true`) seen by the downstream parser. This is an instance of CWE-93 (CRLF injection). The fix escapes CR, LF, and `"` as `%0D`, `%0A`, and `%22` in field names and filenames, matching the serialization browsers use per the WHATWG HTML multipart/form-data encoding algorithm. Exploitation requires the consuming application to use untrusted input as a field name or filename; applications that use only fixed/trusted field names are not affected. Fixed in 2.5.6, 3.0.5, and 4.0.6.

🎖@cveNotify

🚨 CVE-2026-48779
ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0.

🎖@cveNotify

🚨 CVE-2026-12151
Impact:
The undici WebSocket client enforces maxPayloadSize on the cumulative byte count of fragments in a message but does not enforce a limit on the number of fragments. A malicious WebSocket server can stream many small or empty continuation frames that each pass per-frame and cumulative-size validation, collectively causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.

Affected applications are those using the undici WebSocket client (new WebSocket(...)) or the WebSocketStream API that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.

All releases starting at undici 6.17.0 are affected.

Patches: Upgrade to undici >= 6.26.0, >= 7.28.0, or >= 8.5.0. Workarounds:
No workaround is available. The fix must be applied through an upgrade.

🎖@cveNotify

🚨 CVE-2026-6734
Impact:
When using Socks5ProxyAgent, undici reuses a single connection pool across different origins without verifying that the pool's origin matches the requested origin. All requests are dispatched through the pool connected to the first origin, regardless of the intended destination.

This causes cross-origin request routing: credentials and request data intended for origin B are sent to origin A, responses from the wrong origin are trusted, and HTTPS requests may be silently downgraded to HTTP.

Impacted users are applications that use Socks5ProxyAgent (directly or via setGlobalDispatcher) and make requests to more than one origin.

This was introduced in undici 7.23.0 via PR #4385 and affects all versions through 8.1.0.

Patches:
Upgrade to undici v7.26.0 or v8.2.0.

Workarounds:
Use a separate Socks5ProxyAgent instance per origin, or avoid using Socks5ProxyAgent with multiple origins.

🎖@cveNotify

🚨 CVE-2026-9697
Impact:
undici's ProxyAgent silently drops the requestTls option when configured with a SOCKS5 proxy URI (socks5:// or socks://). The target HTTPS connection through the SOCKS5 tunnel falls back to Node's default trust store, ignoring user-configured ca, cert, key, rejectUnauthorized, and servername settings.

Applications that pin to an internal or corporate CA via requestTls.ca will, when their proxy URI is SOCKS5, get the default Mozilla CA bundle as the trust anchor instead. Any cert signed by any publicly-trusted CA for the target hostname is accepted, breaking the intended pin and enabling MITM read and tamper of the HTTPS exchange.

Affected applications are those that use undici's ProxyAgent (or Socks5ProxyAgent directly) with SOCKS5 AND rely on requestTls for TLS scope restriction. The bug was introduced in undici 7.23.0 when SOCKS5 support was added.

Patches:
Upgrade to undici v7.28.0 or v8.5.0.

Workarounds:
No workaround is available within the SOCKS5 path. If a SOCKS5 proxy with TLS scope restriction is required and an upgrade is not yet possible, route the traffic through an HTTP-proxy ProxyAgent instead, where requestTls is honored correctly.

🎖@cveNotify

🚨 CVE-2026-41523
vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.22.0, an assert-based security check in vLLM's activation function loading allows any unauthenticated attacker to achieve arbitrary code execution on the server by publishing a malicious HuggingFace model, when vLLM runs in Python optimized mode (python -O or PYTHONOPTIMIZE=1). This vulnerability is fixed in 0.22.0.

🎖@cveNotify