🚨 CVE-2026-80745
In the Linux kernel, the following vulnerability has been resolved:
regulator: fp9931: Fix VPOS/VNEG voltage selector table
The VPOSNEG_table[] mapping does not match the FP9931 datasheet.
The datasheet defines the VPOS/VNEG voltage mapping as:
00h-04h -> 7.04V (-7.04V)
05h -> 7.26V (-7.26V)
06h -> 7.49V (-7.49V)
...
28h-3Fh -> 15.06V (-15.06V)
However, VPOSNEG_table[] has two issues:
1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the
table has 6 entries of 7.04V, causing all subsequent entries to be
shifted by one position.
2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but
the table has only 41 entries. Any selector value above 0x28
would result in an out-of-bounds table access.
Fix both issues by removing the duplicate 7.04V entry and appending
the missing 23 clamped 15.06V entries, bringing the table to the
correct size of 64 entries (0x00~0x3F).
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
regulator: fp9931: Fix VPOS/VNEG voltage selector table
The VPOSNEG_table[] mapping does not match the FP9931 datasheet.
The datasheet defines the VPOS/VNEG voltage mapping as:
00h-04h -> 7.04V (-7.04V)
05h -> 7.26V (-7.26V)
06h -> 7.49V (-7.49V)
...
28h-3Fh -> 15.06V (-15.06V)
However, VPOSNEG_table[] has two issues:
1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the
table has 6 entries of 7.04V, causing all subsequent entries to be
shifted by one position.
2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but
the table has only 41 entries. Any selector value above 0x28
would result in an out-of-bounds table access.
Fix both issues by removing the duplicate 7.04V entry and appending
the missing 23 clamped 15.06V entries, bringing the table to the
correct size of 64 entries (0x00~0x3F).
🎖@cveNotify
🚨 CVE-2026-80747
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add bounds check for CRAT subtype length
The CRAT parser validates that the subtype header fits within the image,
but does not verify that the advertised subtype length fits. A malformed
CRAT table with an oversized length field causes out-of-bounds reads when
kfd_parse_subtype() casts the header to specific subtype structures.
Add validation that sub_type_hdr + length does not exceed the image
boundary before parsing the subtype contents.
(cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add bounds check for CRAT subtype length
The CRAT parser validates that the subtype header fits within the image,
but does not verify that the advertised subtype length fits. A malformed
CRAT table with an oversized length field causes out-of-bounds reads when
kfd_parse_subtype() casts the header to specific subtype structures.
Add validation that sub_type_hdr + length does not exceed the image
boundary before parsing the subtype contents.
(cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d)
🎖@cveNotify
🚨 CVE-2026-80748
In the Linux kernel, the following vulnerability has been resolved:
mmc: loongson2: Fix sg iteration in data reorder functions
In ls2k0500_mmc_reorder_cmd_data() and ls2k2000_mmc_reorder_cmd_data(),
the for_each_sg() macro already iterates over the scatterlist entries,
with 'sg' pointing to the current entry. However, the code incorrectly
uses '&sg[i]' and 'sg_dma_len(&sg[i])' inside the loop, which treats
'sg' as an array base and indexes it again, leading to access of
wrong sg entries (or out-of-bounds if the list is not an array).
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mmc: loongson2: Fix sg iteration in data reorder functions
In ls2k0500_mmc_reorder_cmd_data() and ls2k2000_mmc_reorder_cmd_data(),
the for_each_sg() macro already iterates over the scatterlist entries,
with 'sg' pointing to the current entry. However, the code incorrectly
uses '&sg[i]' and 'sg_dma_len(&sg[i])' inside the loop, which treats
'sg' as an array base and indexes it again, leading to access of
wrong sg entries (or out-of-bounds if the list is not an array).
🎖@cveNotify
🚨 CVE-2026-80749
In the Linux kernel, the following vulnerability has been resolved:
drm/connector/hdmi: Fix out of bounds memory read
A helper function was copying a given audio infoframe into the
connector's copy but using the size of the destination (a generic
target, sized to accept many different data blocks) not the source (a
very specific type of data block). Thus, it was copying 60 bytes of
data from a 28 byte allocation.
Fix that by using the source size instead, together with a build bug
on the source size actually being smaller than the destination.
I hit this running KUnit tests under KASAN (while debugging something
else entirely). In the real world, it seems unlikely to cause an
actual problem. It is a read not a write so it can't corrupt any
memory. However, it could potentially fall off the end of a page and
cause an accvio bug.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/connector/hdmi: Fix out of bounds memory read
A helper function was copying a given audio infoframe into the
connector's copy but using the size of the destination (a generic
target, sized to accept many different data blocks) not the source (a
very specific type of data block). Thus, it was copying 60 bytes of
data from a 28 byte allocation.
Fix that by using the source size instead, together with a build bug
on the source size actually being smaller than the destination.
I hit this running KUnit tests under KASAN (while debugging something
else entirely). In the real world, it seems unlikely to cause an
actual problem. It is a read not a write so it can't corrupt any
memory. However, it could potentially fall off the end of a page and
cause an accvio bug.
🎖@cveNotify
🚨 CVE-2026-80750
In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: fix remaining %pOF after of_node_put()
scpsys_get_bus_protection_legacy() looks up several legacy bus
protection regmaps from device-tree nodes.
Two error paths put the device node before checking whether the regmap
lookup failed, but still pass that node to dev_err_probe() with %pOF on
failure. If of_node_put() drops the last reference, the later %pOF
formatting can dereference a freed device node.
Keep the node reference until after the error message has been emitted in
the infracfg and SMI lookup paths. Also drop the SMI node before
returning when the SMI phandle is missing.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: fix remaining %pOF after of_node_put()
scpsys_get_bus_protection_legacy() looks up several legacy bus
protection regmaps from device-tree nodes.
Two error paths put the device node before checking whether the regmap
lookup failed, but still pass that node to dev_err_probe() with %pOF on
failure. If of_node_put() drops the last reference, the later %pOF
formatting can dereference a freed device node.
Keep the node reference until after the error message has been emitted in
the infracfg and SMI lookup paths. Also drop the SMI node before
returning when the SMI phandle is missing.
🎖@cveNotify
🚨 CVE-2026-80751
In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: mfg: initialize prev_o in mtk_mfg_attach_dev()
mtk_mfg_attach_dev() reads prev_o on the first iteration of its loop,
in "if (prev_o && prev_o->freq == o->freq)", before prev_o is assigned
at the end of the loop body. On that first iteration, evaluating prev_o
reads an indeterminate value. If it is non-NULL, the condition
dereferences a stale or invalid pointer, potentially faulting or
incorrectly skipping the first OPP.
Initialize prev_o to NULL. This matches the intent as well: there is no
previous OPP to compare against on the first iteration.
Found with Clang's -Wconditional-uninitialized.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: mfg: initialize prev_o in mtk_mfg_attach_dev()
mtk_mfg_attach_dev() reads prev_o on the first iteration of its loop,
in "if (prev_o && prev_o->freq == o->freq)", before prev_o is assigned
at the end of the loop body. On that first iteration, evaluating prev_o
reads an indeterminate value. If it is non-NULL, the condition
dereferences a stale or invalid pointer, potentially faulting or
incorrectly skipping the first OPP.
Initialize prev_o to NULL. This matches the intent as well: there is no
previous OPP to compare against on the first iteration.
Found with Clang's -Wconditional-uninitialized.
🎖@cveNotify
🚨 CVE-2026-80752
In the Linux kernel, the following vulnerability has been resolved:
Input: psxpad-spi - set driver data before use
psxpad_spi_suspend() retrieves the controller state with
spi_get_drvdata(), but probe never stores it, so suspend dereferences a
NULL pointer. Store it during probe.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Input: psxpad-spi - set driver data before use
psxpad_spi_suspend() retrieves the controller state with
spi_get_drvdata(), but probe never stores it, so suspend dereferences a
NULL pointer. Store it during probe.
🎖@cveNotify
🚨 CVE-2026-80753
In the Linux kernel, the following vulnerability has been resolved:
ovpn: run deferred work on a module-owned workqueue
ovpn queues several work items whose callbacks execute module text.
These works currently run on the global system workqueues, so module
exit has no driver-owned drain point that guarantees the callbacks have
fully returned before the module text can be freed.
Object references protect the objects used by the callbacks, but they do
not prove that a workqueue function has returned. In particular, a
worker can drop the final reference that unblocks device teardown while
it is still executing ovpn code.
Add a module-owned workqueue and queue all ovpn work items on it. During
module exit, unregister rtnl and netlink first, flush the workqueue so
ordinary ovpn workers finish, run the final RCU barrier, and destroy the
workqueue last. This keeps the workqueue available for cleanup work
queued from RCU callbacks, while ensuring no ovpn work item can outlive
the module text.
The per-device delayed keepalive work remains explicitly disabled during
netdev teardown (disable_delayed_work_sync in ndo_uninit), since
flush_workqueue does not flush delayed work that is still only pending
on its timer.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ovpn: run deferred work on a module-owned workqueue
ovpn queues several work items whose callbacks execute module text.
These works currently run on the global system workqueues, so module
exit has no driver-owned drain point that guarantees the callbacks have
fully returned before the module text can be freed.
Object references protect the objects used by the callbacks, but they do
not prove that a workqueue function has returned. In particular, a
worker can drop the final reference that unblocks device teardown while
it is still executing ovpn code.
Add a module-owned workqueue and queue all ovpn work items on it. During
module exit, unregister rtnl and netlink first, flush the workqueue so
ordinary ovpn workers finish, run the final RCU barrier, and destroy the
workqueue last. This keeps the workqueue available for cleanup work
queued from RCU callbacks, while ensuring no ovpn work item can outlive
the module text.
The per-device delayed keepalive work remains explicitly disabled during
netdev teardown (disable_delayed_work_sync in ndo_uninit), since
flush_workqueue does not flush delayed work that is still only pending
on its timer.
🎖@cveNotify
🚨 CVE-2026-80754
In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - fix F55 transmitter electrode count typo
During F55 sensor detection, the transmitter (TX) electrode count was
incorrectly assigned the value of the receiver (RX) electrode count
due to copy-paste typos.
This incorrect value was then propagated to the driver data and used
by F54 to determine the diagnostics report size. On devices with more
RX than TX electrodes, this inflated the perceived TX count, leading
to incorrect report size calculations and potential out-of-bounds
buffer accesses.
Fix the typos by correctly assigning the TX electrode counts.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - fix F55 transmitter electrode count typo
During F55 sensor detection, the transmitter (TX) electrode count was
incorrectly assigned the value of the receiver (RX) electrode count
due to copy-paste typos.
This incorrect value was then propagated to the driver data and used
by F54 to determine the diagnostics report size. On devices with more
RX than TX electrodes, this inflated the perceived TX count, leading
to incorrect report size calculations and potential out-of-bounds
buffer accesses.
Fix the typos by correctly assigning the TX electrode counts.
🎖@cveNotify
🚨 CVE-2026-11613
The Divi Ajax Filter plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 5.1.2 via the 'custom_loop_template' parameter parameter. This makes it possible for unauthenticated attackers to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. This vulnerability is only exploitable when the loop_templates parameter is set to 'custom-template'.
🎖@cveNotify
The Divi Ajax Filter plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 5.1.2 via the 'custom_loop_template' parameter parameter. This makes it possible for unauthenticated attackers to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. This vulnerability is only exploitable when the loop_templates parameter is set to 'custom-template'.
🎖@cveNotify
Divi Engine
Divi Ajax Filter Changelog
/* CHANGELOG */ VERSION 5.2.4 – 20/08/26 VERSION 5.2.3 – 20/08/26 VERSION 5.2.2 – 20/08/26 VERSION 5.2.1 – 19/08/26 VERSION 5.2.0 – 18/08/26 VERSION 5.1.3 – 11/08/26 VERSION 5.1.2 – 10/08/26 VERSION 5.1.1 – 09/08/26 VERSION 5.1.0 – 06/08/26 VERSION 5.0.0…
🚨 CVE-2026-85408
A vulnerability was determined in Eleveo Quality Management 9.7.0. Impacted is an unknown function of the file /enc-fwk-data/api/v3/conversations/<ID>/events of the component Conversation Handler. This manipulation of the argument createdBy causes dynamically-determined object attributes. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A vulnerability was determined in Eleveo Quality Management 9.7.0. Impacted is an unknown function of the file /enc-fwk-data/api/v3/conversations/<ID>/events of the component Conversation Handler. This manipulation of the argument createdBy causes dynamically-determined object attributes. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
🚨 CVE-2026-85409
A vulnerability was identified in Eleveo Quality Management 9.7.0. The affected element is the function QuestionnaireService.runDataExportNow of the component Questionnaire Service. Such manipulation of the argument file_name leads to path traversal. The attack may be performed from remote. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A vulnerability was identified in Eleveo Quality Management 9.7.0. The affected element is the function QuestionnaireService.runDataExportNow of the component Questionnaire Service. Such manipulation of the argument file_name leads to path traversal. The attack may be performed from remote. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
🚨 CVE-2026-85504
FreeIPMI before 1.6.19 has a stack-based buffer overflow in _ipmi_sel_oem_fujitsu_get_sel_entry_long_text in libfreeipmi/sel/ipmi-sel-string-fujitsu-irmc-common.c via malformed Fujitsu SEL long-text responses.
🎖@cveNotify
FreeIPMI before 1.6.19 has a stack-based buffer overflow in _ipmi_sel_oem_fujitsu_get_sel_entry_long_text in libfreeipmi/sel/ipmi-sel-string-fujitsu-irmc-common.c via malformed Fujitsu SEL long-text responses.
🎖@cveNotify
🚨 CVE-2026-85505
ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer over-read in ipmi_oem_fujitsu_get_sel_entry_long_text in ipmi-oem/ipmi-oem-fujitsu.c when a BMC provides a short response, a different vulnerability than CVE-2026-50031 (which has different affected versions).
🎖@cveNotify
ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer over-read in ipmi_oem_fujitsu_get_sel_entry_long_text in ipmi-oem/ipmi-oem-fujitsu.c when a BMC provides a short response, a different vulnerability than CVE-2026-50031 (which has different affected versions).
🎖@cveNotify
🚨 CVE-2026-85506
ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _get_dell_system_info_idrac_info in ipmi-oem/ipmi-oem-dell.c (idrac-info subcommand to dell get-system-info).
🎖@cveNotify
ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _get_dell_system_info_idrac_info in ipmi-oem/ipmi-oem-dell.c (idrac-info subcommand to dell get-system-info).
🎖@cveNotify
🚨 CVE-2026-85507
ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_info in ipmi-oem/ipmi-oem-dell.c (cmc-info subcommand to dell get-system-info).
🎖@cveNotify
ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_info in ipmi-oem/ipmi-oem-dell.c (cmc-info subcommand to dell get-system-info).
🎖@cveNotify
🚨 CVE-2026-85508
ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_ipv6_info in ipmi-oem/ipmi-oem-dell.c (cmc-ipv6-info subcommand to dell get-system-info).
🎖@cveNotify
ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_ipv6_info in ipmi-oem/ipmi-oem-dell.c (cmc-ipv6-info subcommand to dell get-system-info).
🎖@cveNotify
🚨 CVE-2026-85509
FreeIPMI before 1.6.19 has a stack-based buffer overflow in _read_fru_data in libfreeipmi/fru/ipmi-fru.c when a BMC returns more bytes than requested.
🎖@cveNotify
FreeIPMI before 1.6.19 has a stack-based buffer overflow in _read_fru_data in libfreeipmi/fru/ipmi-fru.c when a BMC returns more bytes than requested.
🎖@cveNotify
🚨 CVE-2026-49509
Out-of-bounds read vulnerability in Samsung Opensource Escargot allows Overread Buffers.
This issue affects Escargot: 25648aef19187b3f87f4d9420b8d761453ad4630.
🎖@cveNotify
Out-of-bounds read vulnerability in Samsung Opensource Escargot allows Overread Buffers.
This issue affects Escargot: 25648aef19187b3f87f4d9420b8d761453ad4630.
🎖@cveNotify
GitHub
stb_image: don't deal with fractional ratios by mmaciola · Pull Request #604 · Samsung/rlottie
Apply fix from stb 2.27
🚨 CVE-2025-15691
The WPFunnels WordPress plugin before 3.13.0 does not check whether user registration is enabled on the site before creating accounts from opt-in form submissions, relying on a value supplied in the request instead, allowing unauthenticated attackers to create WordPress user accounts even when registration is disabled.
This is an incomplete fix for CVE-2025-12353: the check added in 3.6.3 covers only one of the three registration paths.
🎖@cveNotify
The WPFunnels WordPress plugin before 3.13.0 does not check whether user registration is enabled on the site before creating accounts from opt-in form submissions, relying on a value supplied in the request instead, allowing unauthenticated attackers to create WordPress user accounts even when registration is disabled.
This is an incomplete fix for CVE-2025-12353: the check added in 3.6.3 covers only one of the three registration paths.
🎖@cveNotify
WPScan
WPFunnels < 3.13.0 - Unauthenticated User Registration via Opt-in Forms
See details on WPFunnels < 3.13.0 - Unauthenticated User Registration via Opt-in Forms CVE 2025-15691. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-15354
The ACPT (Premium) plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.0.66. This is due to missing authorization in the `submit()` function, which allows unauthenticated form submissions to control the target user ID before calling `wp_update_user()`. This makes it possible for unauthenticated attackers to overwrite any WordPress user's email address and password, including an administrator's, and take over the account. Successful exploitation requires a public ACPT user form that permits anonymous submissions.
🎖@cveNotify
The ACPT (Premium) plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.0.66. This is due to missing authorization in the `submit()` function, which allows unauthenticated form submissions to control the target user ID before calling `wp_update_user()`. This makes it possible for unauthenticated attackers to overwrite any WordPress user's email address and password, including an administrator's, and take over the account. Successful exploitation requires a public ACPT user form that permits anonymous submissions.
🎖@cveNotify
ACPT
ACPT Changelog — Version History
Full version history for ACPT: new features, bug fixes, and improvements across every release of the WordPress custom post types framework.