🚨 CVE-2026-33606
Mail content stored by a user can be crafted so that it is interpreted as dsync protocol commands when an administrator later runs dsync with the stream protocol, for example during a migration. Injected commands can modify mailbox state on the destination during migration or replication, including internal mailbox attributes that a user should not be able to set directly. It can also cause dsync errors. Avoid running dsync with the stream protocol on mailboxes with untrusted content. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
Mail content stored by a user can be crafted so that it is interpreted as dsync protocol commands when an administrator later runs dsync with the stream protocol, for example during a migration. Injected commands can modify mailbox state on the destination during migration or replication, including internal mailbox attributes that a user should not be able to set directly. It can also cause dsync errors. Avoid running dsync with the stream protocol on mailboxes with untrusted content. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-33607
An attacker that has valid credentials can use IMAP LIST command to consume CPU. This can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage and kill the offending process and lock account. Alternatively install fixed version. No publicly available exploits are known.
🎖@cveNotify
An attacker that has valid credentials can use IMAP LIST command to consume CPU. This can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage and kill the offending process and lock account. Alternatively install fixed version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-40013
An attacker that has valid credentials can submit a Sieve script containing an extreme numeric literal, which causes an out-of-bounds write when the ManageSieve service compiles the script. This causes memory corruption and an observed crash of the ManageSieve process, resulting in denial of service for script management. This might be able to be used for remote code execution. Disable the ManageSieve service if users do not need remote Sieve script management. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that has valid credentials can submit a Sieve script containing an extreme numeric literal, which causes an out-of-bounds write when the ManageSieve service compiles the script. This causes memory corruption and an observed crash of the ManageSieve process, resulting in denial of service for script management. This might be able to be used for remote code execution. Disable the ManageSieve service if users do not need remote Sieve script management. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-40014
An attacker that can send mail to a user can craft a message header that makes the IMAP THREAD command consume CPU disproportionate to the size of the message. When a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that can send mail to a user can craft a message header that makes the IMAP THREAD command consume CPU disproportionate to the size of the message. When a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-40015
An attacker that has valid credentials can open many connections to the imap-hibernate service and send invalid commands, which can intermittently cause an out-of-bounds read and crash the process. The crash interrupts hibernated IMAP sessions handled by the affected process, which can cause degradation of service for IMAP. Disable IMAP hibernation. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that has valid credentials can open many connections to the imap-hibernate service and send invalid commands, which can intermittently cause an out-of-bounds read and crash the process. The crash interrupts hibernated IMAP sessions handled by the affected process, which can cause degradation of service for IMAP. Disable IMAP hibernation. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-40017
An attacker that can send mail to a user can craft a message header whose values are chosen to collide in an internal hash table, which makes the IMAP THREAD command consume CPU disproportionate to the size of the message. This is a separate issue from CVE-2026-40014 and is not addressed by that fix. Whenever a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that can send mail to a user can craft a message header whose values are chosen to collide in an internal hash table, which makes the IMAP THREAD command consume CPU disproportionate to the size of the message. This is a separate issue from CVE-2026-40014 and is not addressed by that fix. Whenever a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-40203
When IMAP compression is enabled, the same compression state is reused across responses in a session, so response sizes depend on both attacker-supplied mail and other mail in the same mailbox. An attacker that can send mail to a user and can also observe the sizes of that user's IMAP traffic can confirm whether the body of a small message matches a guessed text. Recovery of arbitrary unknown content was not demonstrated, but the attack can disclose whether a secret-like message body matches a candidate. Disable IMAP compression. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
When IMAP compression is enabled, the same compression state is reused across responses in a session, so response sizes depend on both attacker-supplied mail and other mail in the same mailbox. An attacker that can send mail to a user and can also observe the sizes of that user's IMAP traffic can confirm whether the body of a small message matches a guessed text. Recovery of arbitrary unknown content was not demonstrated, but the attack can disclose whether a secret-like message body matches a candidate. Disable IMAP compression. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-40205
An attacker that holds an OAuth2 token granting only part of the required scopes can authenticate, because when more than one scope is required in the configuration, the remote token validation paths accept a token that carries only one of them, while the local token validation path correctly requires all of them. The configured authorization policy is not enforced, so a token that was granted only part of the required permissions is accepted where it should have been rejected. Use local token validation where tokens can be validated locally. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that holds an OAuth2 token granting only part of the required scopes can authenticate, because when more than one scope is required in the configuration, the remote token validation paths accept a token that carries only one of them, while the local token validation path correctly requires all of them. The configured authorization policy is not enforced, so a token that was granted only part of the required permissions is accepted where it should have been rejected. Use local token validation where tokens can be validated locally. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-42007
An attacker that has valid credentials can use a Sieve script with the editheader extension to trigger a use-after-free in the mail editing code, and to write memory contents beyond the intended buffer into the delivered mail. This causes memory leak and opportunity to do memory corruption during mail delivery, which can crash the delivery process and may allow execution of arbitrary code in the context of that process. Disable the Sieve editheader extension. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that has valid credentials can use a Sieve script with the editheader extension to trigger a use-after-free in the mail editing code, and to write memory contents beyond the intended buffer into the delivered mail. This causes memory leak and opportunity to do memory corruption during mail delivery, which can crash the delivery process and may allow execution of arbitrary code in the context of that process. Disable the Sieve editheader extension. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-42008
Forwarding information received from a host listed as a trusted proxy is not kept separate from Dovecot's own authentication fields, so a value sent by that host can be injected as an internal authentication field. Any host permitted to act as a trusted proxy can authenticate as any user without knowing that user's password. This affects deployments whose password database honours a field that permits authentication without a password. Deployments that do not configure trusted proxies are not affected. Restrict the list of trusted proxy networks to hosts that are fully under your control. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
Forwarding information received from a host listed as a trusted proxy is not kept separate from Dovecot's own authentication fields, so a value sent by that host can be injected as an internal authentication field. Any host permitted to act as a trusted proxy can authenticate as any user without knowing that user's password. This affects deployments whose password database honours a field that permits authentication without a password. Deployments that do not configure trusted proxies are not affected. Restrict the list of trusted proxy networks to hosts that are fully under your control. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-42391
An unauthenticated attacker can send an IMAP ID command with a very large number of parameters before logging in, which causes memory and CPU usage to grow disproportionately. The login process can be terminated by the out-of-memory handling, which also terminates all other connections handled by the same process. This can cause degradation or denial of service for IMAP logins. Limit the number of connections handled by a single imap-login process. This has a performance impact though. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An unauthenticated attacker can send an IMAP ID command with a very large number of parameters before logging in, which causes memory and CPU usage to grow disproportionately. The login process can be terminated by the out-of-memory handling, which also terminates all other connections handled by the same process. This can cause degradation or denial of service for IMAP logins. Limit the number of connections handled by a single imap-login process. This has a performance impact though. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-42392
An attacker that has valid credentials can send an invalid IMAP URLFETCH command, which causes uninitialized memory to be included in the error response returned to the client. Process memory contents can be disclosed to the client, which may include sensitive data. Disable the IMAP URLAUTH functionality. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that has valid credentials can send an invalid IMAP URLFETCH command, which causes uninitialized memory to be included in the error response returned to the client. Process memory contents can be disclosed to the client, which may include sensitive data. Disable the IMAP URLAUTH functionality. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-42393
The comparison used for the doveadm password and API key is not fully timing safe and can reveal the length of the configured secret. An attacker with access to the same network as the doveadm service, able to make repeated requests and measure response timing accurately, can learn the length of the secret, which reduces the effort needed to guess it. The secret value itself is not disclosed. Restrict network access to the doveadm service to trusted clients. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
The comparison used for the doveadm password and API key is not fully timing safe and can reveal the length of the configured secret. An attacker with access to the same network as the doveadm service, able to make repeated requests and measure response timing accurately, can learn the length of the secret, which reduces the effort needed to guess it. The secret value itself is not disclosed. Restrict network access to the doveadm service to trusted clients. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-42395
A host listed as a trusted proxy can send forwarding information containing a NUL byte, which crashes the login process on the following login attempt. The login process is terminated, which can cause degradation or denial of service for logins. Deployments that do not configure trusted proxies are not affected. Restrict the list of trusted proxy networks to hosts that are fully under your control. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
A host listed as a trusted proxy can send forwarding information containing a NUL byte, which crashes the login process on the following login attempt. The login process is terminated, which can cause degradation or denial of service for logins. Deployments that do not configure trusted proxies are not affected. Restrict the list of trusted proxy networks to hosts that are fully under your control. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-52681
Sieve CPU resource usage is tracked in the compiled script, so an attacker that has valid credentials can reset the accounting by repeatedly changing the active script. Compiled script files are also not removed when a script is deleted or renamed. The configured Sieve CPU limit can be bypassed, allowing sustained CPU consumption, and the leftover files increase disk consumption. Both can cause degradation of service for mail delivery. Monitor system for abnormal CPU usage and disk consumption. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
Sieve CPU resource usage is tracked in the compiled script, so an attacker that has valid credentials can reset the accounting by repeatedly changing the active script. Compiled script files are also not removed when a script is deleted or renamed. The configured Sieve CPU limit can be bypassed, allowing sustained CPU consumption, and the leftover files increase disk consumption. Both can cause degradation of service for mail delivery. Monitor system for abnormal CPU usage and disk consumption. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-52687
An attacker that has valid credentials can select a compression algorithm for the IMAP connection whose decompression state requires a large amount of memory, and open several such connections. The memory limit of the process is reached with only a few connections, terminating the process and all connections it handles, which can cause degradation or denial of service for IMAP. Disable IMAP compression. Alternatively limit the number of connections handled by a single imap-login process, though this has a performance impact. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that has valid credentials can select a compression algorithm for the IMAP connection whose decompression state requires a large amount of memory, and open several such connections. The memory limit of the process is reached with only a few connections, terminating the process and all connections it handles, which can cause degradation or denial of service for IMAP. Disable IMAP compression. Alternatively limit the number of connections handled by a single imap-login process, though this has a performance impact. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-73208
An attacker that holds a token intended for a different purpose can authenticate, because when an OAuth2 token response does not contain a scope claim, the audience claim is used in its place and checked against the configured required scopes. These are different concepts, and the audience claim does not describe what a token is allowed to do. A token that grants no relevant permissions can be accepted because its intended recipient value happens to match a configured scope name, granting access that should have been denied. It also hides an identity provider misconfiguration where scopes are not being issued at all. Ensure the identity provider issues a scope claim for all tokens used with Dovecot, and that configured scope names do not match audience values. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that holds a token intended for a different purpose can authenticate, because when an OAuth2 token response does not contain a scope claim, the audience claim is used in its place and checked against the configured required scopes. These are different concepts, and the audience claim does not describe what a token is allowed to do. A token that grants no relevant permissions can be accepted because its intended recipient value happens to match a configured scope name, granting access that should have been denied. It also hides an identity provider misconfiguration where scopes are not being issued at all. Ensure the identity provider issues a scope claim for all tokens used with Dovecot, and that configured scope names do not match audience values. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-73209
An attacker that has valid credentials can send crafted compressed data that causes the affected process to exhaust its stack and crash. The affected process is terminated, which can cause degradation or denial of service for IMAP. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that has valid credentials can send crafted compressed data that causes the affected process to exhaust its stack and crash. The affected process is terminated, which can cause degradation or denial of service for IMAP. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-82417
### Summary
`qs.stringify` throws a `TypeError` when it serializes an object whose own `constructor` property has a truthy, non-callable `isBuffer` member. `utils.isBuffer` duck-types buffers by calling `obj.constructor.isBuffer(obj)` after checking only that the property is truthy, so a value such as `{ constructor: { isBuffer: "x" } }` makes the call throw `TypeError: obj.constructor.isBuffer is not a function`.
### Details
`lib/stringify.js:127` calls `utils.isBuffer` on every non-primitive value it serializes. `utils.isBuffer` (`lib/utils.js:332`) reads `obj.constructor.isBuffer` and invokes it without verifying that it is a function. `constructor` and `isBuffer` are ordinary property names, so any object carrying them as own properties reaches the unchecked call.
Such an object can be built from untrusted input. `qs.parse("x[constructor][isBuffer]=y", { plainObjects: true })` or `{ allowPrototypes: true }` keeps the `constructor` key as an own property (the default parse options drop it), and `JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}")` produces the same shape with no qs option involved. Express 4 with its default `query parser` setting and body-parser with `extended: true` both call `qs.parse` with `allowPrototypes: true`, so on those stacks `req.query` and `req.body` can carry the shape directly.
#### PoC
```js
var qs = require("qs");
qs.stringify(qs.parse("x[constructor][isBuffer]=y", { plainObjects: true }));
qs.stringify(JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}"));
// TypeError: obj.constructor.isBuffer is not a function
// at Object.isBuffer (lib/utils.js:332:78)
// at stringify (lib/stringify.js:127:45)
```
#### Fix
`lib/utils.js`, applied in e83d321 on `main` and released as v6.16.0:
```diff
- return !!(obj.constructor && obj.constructor.isBuffer && obj.constructor.isBuffer(obj));
+ return !!(obj.constructor && typeof obj.constructor.isBuffer === "function" && obj.constructor.isBuffer(obj));
```
Real `Buffer`, `safer-buffer`, and browserify `buffer` polyfill instances serialize exactly as before; only the throw is removed.
### Affected versions
`>=2.2.5 <6.16.0`, fixed in v6.16.0.
The unguarded duck-type was introduced in 3768a75 and first shipped in v2.2.5 (September 2014). v2.2.4 and earlier used `Buffer.isBuffer` and are not affected. Every release from v2.2.5 through v6.15.3 contains the unguarded call.
### Impact
An unauthenticated request can make any code path that re-serializes attacker-influenced data with `qs.stringify` (for example, rebuilding a query string from `req.query` for a redirect or an upstream request, or serializing a parsed JSON body) throw synchronously. In a typical Node.js HTTP framework the throw is caught by the framework error boundary and the affected request returns a 500; the process survives and other requests are unaffected. Where the call runs outside an error boundary, such as an `async` Express 4 handler (where the throw becomes an unhandled promise rejection) or a background job, the process exits, so the impact in that case depends on the application error handling rather than on qs.
🎖@cveNotify
### Summary
`qs.stringify` throws a `TypeError` when it serializes an object whose own `constructor` property has a truthy, non-callable `isBuffer` member. `utils.isBuffer` duck-types buffers by calling `obj.constructor.isBuffer(obj)` after checking only that the property is truthy, so a value such as `{ constructor: { isBuffer: "x" } }` makes the call throw `TypeError: obj.constructor.isBuffer is not a function`.
### Details
`lib/stringify.js:127` calls `utils.isBuffer` on every non-primitive value it serializes. `utils.isBuffer` (`lib/utils.js:332`) reads `obj.constructor.isBuffer` and invokes it without verifying that it is a function. `constructor` and `isBuffer` are ordinary property names, so any object carrying them as own properties reaches the unchecked call.
Such an object can be built from untrusted input. `qs.parse("x[constructor][isBuffer]=y", { plainObjects: true })` or `{ allowPrototypes: true }` keeps the `constructor` key as an own property (the default parse options drop it), and `JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}")` produces the same shape with no qs option involved. Express 4 with its default `query parser` setting and body-parser with `extended: true` both call `qs.parse` with `allowPrototypes: true`, so on those stacks `req.query` and `req.body` can carry the shape directly.
#### PoC
```js
var qs = require("qs");
qs.stringify(qs.parse("x[constructor][isBuffer]=y", { plainObjects: true }));
qs.stringify(JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}"));
// TypeError: obj.constructor.isBuffer is not a function
// at Object.isBuffer (lib/utils.js:332:78)
// at stringify (lib/stringify.js:127:45)
```
#### Fix
`lib/utils.js`, applied in e83d321 on `main` and released as v6.16.0:
```diff
- return !!(obj.constructor && obj.constructor.isBuffer && obj.constructor.isBuffer(obj));
+ return !!(obj.constructor && typeof obj.constructor.isBuffer === "function" && obj.constructor.isBuffer(obj));
```
Real `Buffer`, `safer-buffer`, and browserify `buffer` polyfill instances serialize exactly as before; only the throw is removed.
### Affected versions
`>=2.2.5 <6.16.0`, fixed in v6.16.0.
The unguarded duck-type was introduced in 3768a75 and first shipped in v2.2.5 (September 2014). v2.2.4 and earlier used `Buffer.isBuffer` and are not affected. Every release from v2.2.5 through v6.15.3 contains the unguarded call.
### Impact
An unauthenticated request can make any code path that re-serializes attacker-influenced data with `qs.stringify` (for example, rebuilding a query string from `req.query` for a redirect or an upstream request, or serializing a parsed JSON body) throw synchronously. In a typical Node.js HTTP framework the throw is caught by the framework error boundary and the affected request returns a 500; the process survives and other requests are unaffected. Where the call runs outside an error boundary, such as an `async` Express 4 handler (where the throw becomes an unhandled promise rejection) or a background job, the process exits, so the impact in that case depends on the application error handling rather than on qs.
🎖@cveNotify
GitHub
[Fix] `utils`: `isBuffer`: do not invoke a non-callable `constructor.… · ljharb/qs@e83d321
…isBuffer`
`isBuffer` duck-types buffers via `obj.constructor.isBuffer(obj)`
(since 3768a75 / v2.2.5, so that it works without referencing the `Buffer` global and recognizes polyfill and foreign-r...
`isBuffer` duck-types buffers via `obj.constructor.isBuffer(obj)`
(since 3768a75 / v2.2.5, so that it works without referencing the `Buffer` global and recognizes polyfill and foreign-r...