🚨 CVE-2026-85242
PlaywrightCapture contains a server-side request forgery (SSRF) vulnerability in its favicon retrieval functionality. When only_global_lookup is enabled, the application validates the initial favicon URL to prevent requests to localhost, loopback, or other non-public network addresses. However, redirects followed by aiohttp were not subjected to the same validation.


An attacker able to influence the content of a page processed by PlaywrightCapture could specify a publicly reachable favicon URL that responds with an HTTP redirect to a local or otherwise restricted address, such as 127.0.0.1, localhost, or an internal network service. Because aiohttp automatically followed the redirect, the resulting request could bypass the application's local-address restrictions and cause the PlaywrightCapture host to issue HTTP requests to resources that should not be externally reachable.


Depending on the services reachable from the PlaywrightCapture host and how retrieved favicon data is subsequently exposed or processed, this could be used to probe internal HTTP services or potentially obtain information from otherwise inaccessible endpoints.


The patch introduces an aiohttp request middleware that applies the existing local-URL validation to every request in the redirect chain. Requests resolving to restricted/local destinations are rejected before they are issued.

🎖@cveNotify

🚨 CVE-2026-85302
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WPKoi WordPress Themes WPKoi Templates for Elementor allows DOM-Based XSS.

This issue affects WPKoi Templates for Elementor: from n/a through 3.7.2.

🎖@cveNotify

🚨 CVE-2026-85303
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Magepeople inc. Booking and Rental Manager allows Stored XSS.

This issue affects Booking and Rental Manager: from n/a through 2.7.7.

🎖@cveNotify

🚨 CVE-2026-85304
Missing Authorization vulnerability in Unlimited Elements Unlimited Elements For Elementor (Free Widgets, Addons, Templates) allows Exploiting Incorrectly Configured Access Control Security Levels.

This issue affects Unlimited Elements For Elementor (Free Widgets, Addons, Templates): from n/a through 2.0.17.

🎖@cveNotify

🚨 CVE-2026-85305
Server-Side Request Forgery (SSRF) vulnerability in SEOPress allows Server Side Request Forgery.

This issue affects SEOPress: from n/a through 10.1.

🎖@cveNotify

🚨 CVE-2026-85306
Missing Authorization vulnerability in Cascadia Web Services MountDev AI MCP Connector for WordPress allows Exploiting Incorrectly Configured Access Control Security Levels.

This issue affects MountDev AI MCP Connector for WordPress: from n/a through 1.6.5.

🎖@cveNotify

🚨 CVE-2026-85307
Insertion of Sensitive Information Into Sent Data vulnerability in Kevin Pirnie KP Agent Ready allows Retrieve Embedded Sensitive Data.

This issue affects KP Agent Ready: from n/a before 1.2.08.

🎖@cveNotify

🚨 CVE-2026-85308
Authorization Bypass Through User-Controlled Key vulnerability in Brainstorm Force SureForms allows Exploiting Incorrectly Configured Access Control Security Levels.

This issue affects SureForms: from n/a through 2.12.5.

🎖@cveNotify

🚨 CVE-2026-85309
Missing Authorization vulnerability in Supsystic Ultimate Maps by Supsystic allows Exploiting Incorrectly Configured Access Control Security Levels.

This issue affects Ultimate Maps by Supsystic: from n/a through 1.5.3.

🎖@cveNotify

🚨 CVE-2023-50224
TP-Link TL-WR841N dropbearpwd Improper Authentication Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of TP-Link TL-WR841N routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from improper authentication. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-19899.

🎖@cveNotify

🚨 CVE-2024-42450
The Versa Director uses PostgreSQL (Postgres) to store operational and configuration data. It is also needed for High Availability function of the Versa Director. The default configuration has a common password across all instances of Versa Director. By default, Versa Director configures Postgres to listen on all network interfaces. This combination allows an unauthenticated attacker to access and administer the database or read local filesystem contents to escalate privileges on the system.

Exploitation Status:
Versa Networks is not aware of this exploitation in any production systems. A proof of concept exists in the lab environment.

Workarounds or Mitigation:
Starting with the latest 22.1.4 version of Versa Director, the software will automatically restrict access to the Postgres and HA ports to only the local and peer Versa Directors. For older releases, Versa recommends performing manual hardening of HA ports. Please refer to the following link for the steps https://docs.versa-networks.com/Solutions/System_Hardening/Perform_Manual_Hardening_for_Versa_Director#Secure_HA_Ports

This vulnerability is not exploitable on Versa Directors if published Firewall guidelines are implemented. We have validated that no Versa-hosted head ends have been affected by this vulnerability. All Versa-hosted head ends are patched and hardened.

Please contact Versa Technical Support or Versa account team for any further assistance.

Software Download Links:
22.1.4: https://support.versa-networks.com/support/solutions/articles/23000026708-release-22-1-4

🎖@cveNotify

🚨 CVE-2025-23169
The Versa Director SD-WAN orchestration platform allows customization of the user interface, including the header, footer, and logo. However, the input provided for these customizations is not properly validated or sanitized, allowing a malicious user to inject and store cross-site scripting (XSS) payloads.

Exploitation Status:

Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers.

Workarounds or Mitigation:

There are no workarounds to disable the GUI option. Versa recommends that Director be upgraded to one of the remediated software versions.

🎖@cveNotify

🚨 CVE-2025-23170
The Versa Director SD-WAN orchestration platform includes functionality to initiate SSH sessions to remote CPEs and the Director shell via Shell-In-A-Box. The underlying Python script, shell-connect.py, is vulnerable to command injection through the user argument. This allows an attacker to execute arbitrary commands on the system.

Exploitation Status:

Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers.

Workarounds or Mitigation:

There are no workarounds to disable the GUI option. Versa recommends that Director be upgraded to one of the remediated software versions.

🎖@cveNotify

🚨 CVE-2025-23172
The Versa Director SD-WAN orchestration platform includes a Webhook feature for sending notifications to external HTTP endpoints. However, the "Add Webhook" and "Test Webhook" functionalities can be abused by an authenticated user to send crafted HTTP requests to localhost. This can be leveraged to execute commands on behalf of the versa user, who has sudo privileges, potentially leading to privilege escalation or remote code execution.

Exploitation Status:

Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers.

Workarounds or Mitigation:

There are no workarounds to disable the GUI option. Versa recommends that Director be upgraded to one of the remediated software versions.

🎖@cveNotify

🚨 CVE-2026-2513
A vulnerability exists in Progress Flowmon ADS versions prior to 12.5.5 and 13.0.3, whereby an administrator who clicks a malicious link provided by an attacker may inadvertently trigger unintended actions within their authenticated web session.

🎖@cveNotify

🚨 CVE-2026-2514
In Progress Flowmon ADS versions prior to 12.5.5 and 13.0.3, a vulnerability exists whereby an adversary with access to Flowmon monitoring ports may craft malicious network data that, when processed by Flowmon ADS and viewed by an authenticated user, could result in unintended actions being executed in the user's browser context.

🎖@cveNotify

🚨 CVE-2026-15724
In Progress ShareFile Storage Zones Controller versions prior to 5.12.5 and 6.0.2, an authenticated administrative user can exploit a path traversal vulnerability to read arbitrary files from the server filesystem, write files to arbitrary directories, or determine whether specific files exist on the server.

🎖@cveNotify

🚨 CVE-2026-64439
In the Linux kernel, the following vulnerability has been resolved:

crypto: krb5 - filter out async aead implementations at alloc

krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and
rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL
completion callback and treat any negative return from
crypto_aead_{encrypt,decrypt}() as terminal, falling through to
kfree_sensitive(buffer). When the encrypt_name resolves to an
async AEAD instance the request returns -EINPROGRESS, the buffer
is freed while the backend's worker still holds a pointer, and the
worker dereferences the freed slab on completion.

KASAN report under UML+SLUB with a synthetic async aead backend
bound to krb5->encrypt_name:

BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7

The helpers were written synchronously, so filter the async
instances out at allocation time instead of plumbing
crypto_wait_req() through every call site.

Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and
net/ceph/crypto.c on systems with an async AEAD provider bound to
the krb5 enctype name.

🎖@cveNotify

🚨 CVE-2026-64440
In the Linux kernel, the following vulnerability has been resolved:

staging: rtl8723bs: fix OOB write in HT_caps_handler()

HT_caps_handler() iterates pIE->length bytes and writes into
HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct
HT_caps_element). Because pIE->length is a raw u8 from an over-the-air
802.11 AssocResponse frame and is never validated, a malicious AP can
set it up to 255, causing up to 229 bytes of out-of-bounds writes into
adjacent fields of struct mlme_ext_info.

Truncate the iteration count to the size of HT_caps.u.HT_cap using
umin() so that data from a longer-than-expected IE is silently ignored
rather than written out of bounds, preserving interoperability with APs
that pad the element. An early return on oversized IEs was considered
but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1
assignment that precedes the loop, silently disabling HT mode for APs
that append extra bytes to the HT Capabilities IE.

🎖@cveNotify

🚨 CVE-2026-64441
In the Linux kernel, the following vulnerability has been resolved:

staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()

Three IE/attribute parsing functions have missing bounds checks.

rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer
without verifying that the header bytes (tag + length) are within the
remaining buffer before reading them. Additionally, rtw_get_sec_ie()
compares the 4-byte WPA OUI at cnt+2 without checking that at least
6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at
cnt+6 without checking that at least 10 bytes remain.

rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at
entry, before verifying that wps_ielen is large enough to contain
the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside
the attribute loop, get_unaligned_be16() is called on attr_ptr and
attr_ptr+2 without checking that 4 bytes remain in the buffer.

Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie()
and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum
IE length requirement, add a wps_ielen < 6 early return in
rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop.

🎖@cveNotify

🚨 CVE-2026-64442
In the Linux kernel, the following vulnerability has been resolved:

staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl()

Two IE parsing loops are missing the header bounds checks before they
dereference pIE->length:

- issue_assocreq() walks pmlmeinfo->network.ies to build the
association request. If the stored IE data ends with only an
element_id byte and no length byte, pIE->length is read one byte
past the end of the buffer.

- join_cmd_hdl() walks pnetwork->ies during station join and has
the same problem under the same conditions.

Both buffers are filled from AP beacon and probe-response frames, so a
malicious AP that sends a truncated final IE can trigger the issue.

Apply the two-guard pattern established in update_beacon_info():
1. Break if fewer than sizeof(*pIE) bytes remain.
2. Break if the IE's declared data extends past the buffer end.

🎖@cveNotify