🚨 CVE-2026-48864
A flaw was found in libsolv. This heap buffer overflow occurs during the decompression of attacker-controlled compressed data within `.solv` files due to insufficient input validation. An attacker can provide a specially crafted `.solv` file, which, when processed by a vulnerable application, can lead to out-of-bounds memory access. This could result in information disclosure, alteration of program execution, or a denial of service.
🎖@cveNotify
A flaw was found in libsolv. This heap buffer overflow occurs during the decompression of attacker-controlled compressed data within `.solv` files due to insufficient input validation. An attacker can provide a specially crafted `.solv` file, which, when processed by a vulnerable application, can lead to out-of-bounds memory access. This could result in information disclosure, alteration of program execution, or a denial of service.
🎖@cveNotify
🚨 CVE-2026-42013
A flaw was found in gnutls. When validating certificates, an oversized Subject Alternative Name (SAN) could cause the validation process to incorrectly fall back to checking the Common Name (CN) field. This could allow a remote attacker to bypass proper certificate validation, potentially leading to spoofing or man-in-the-middle attacks.
🎖@cveNotify
A flaw was found in gnutls. When validating certificates, an oversized Subject Alternative Name (SAN) could cause the validation process to incorrectly fall back to checking the Common Name (CN) field. This could allow a remote attacker to bypass proper certificate validation, potentially leading to spoofing or man-in-the-middle attacks.
🎖@cveNotify
🚨 CVE-2026-5260
A flaw was found in libgnutls. A remote attacker, by sending an extremely short premaster secret during an RSA key exchange to a server using an RSA key backed by a PKCS#11 token, could trigger a short heap overread. This memory corruption vulnerability could lead to information disclosure.
🎖@cveNotify
A flaw was found in libgnutls. A remote attacker, by sending an extremely short premaster secret during an RSA key exchange to a server using an RSA key backed by a PKCS#11 token, could trigger a short heap overread. This memory corruption vulnerability could lead to information disclosure.
🎖@cveNotify
🚨 CVE-2026-3012
A flaw was found in Samba’s certificate auto-enrollment Group Policy handling. When certificate auto-enrollment is enabled, Samba may retrieve a CA certificate over an unencrypted HTTP connection and install it into the local trust store without proper verification. An attacker with the ability to intercept or redirect network traffic could exploit this behavior to supply a malicious certificate authority certificate, potentially allowing interception or spoofing of trusted communications.
🎖@cveNotify
A flaw was found in Samba’s certificate auto-enrollment Group Policy handling. When certificate auto-enrollment is enabled, Samba may retrieve a CA certificate over an unencrypted HTTP connection and install it into the local trust store without proper verification. An attacker with the ability to intercept or redirect network traffic could exploit this behavior to supply a malicious certificate authority certificate, potentially allowing interception or spoofing of trusted communications.
🎖@cveNotify
🚨 CVE-2026-1933
A flaw was found in Samba’s handling of NTFS-style reparse points on shares configured with read only = yes. Due to missing SMB-layer access checks, authenticated users with underlying filesystem write permissions may create or delete reparse point metadata through SMB operations even on read-only exports. This could allow modification of SMB-visible file behavior, including converting files into symbolic links or other reparse point types.
🎖@cveNotify
A flaw was found in Samba’s handling of NTFS-style reparse points on shares configured with read only = yes. Due to missing SMB-layer access checks, authenticated users with underlying filesystem write permissions may create or delete reparse point metadata through SMB operations even on read-only exports. This could allow modification of SMB-visible file behavior, including converting files into symbolic links or other reparse point types.
🎖@cveNotify
🚨 CVE-2026-2340
A flaw was found in Samba’s vfs_worm module. The module is intended to provide write-once, read-many (WORM) protections by preventing modification of files after a configurable grace period. Due to insufficient validation during rename operations, an authenticated user with write access to a share could overwrite a protected file by renaming a newly created file over the existing WORM-protected file.
🎖@cveNotify
A flaw was found in Samba’s vfs_worm module. The module is intended to provide write-once, read-many (WORM) protections by preventing modification of files after a configurable grace period. Due to insufficient validation during rename operations, an authenticated user with write access to a share could overwrite a protected file by renaming a newly created file over the existing WORM-protected file.
🎖@cveNotify
🚨 CVE-2026-4408
A flaw was found in Samba. A remote attacker can exploit a misconfiguration in Samba file servers and classic domain controllers that use the "check password script" feature. If this script is configured with the %u substitution character, the client-controlled username is passed without proper escaping of shell meta-characters. This vulnerability allows an attacker to achieve remote command execution on the affected system. This issue primarily affects non-standard configurations where the "check password script" is used with %u and the samba-dcerpcd service is started as a system service.
🎖@cveNotify
A flaw was found in Samba. A remote attacker can exploit a misconfiguration in Samba file servers and classic domain controllers that use the "check password script" feature. If this script is configured with the %u substitution character, the client-controlled username is passed without proper escaping of shell meta-characters. This vulnerability allows an attacker to achieve remote command execution on the affected system. This issue primarily affects non-standard configurations where the "check password script" is used with %u and the samba-dcerpcd service is started as a system service.
🎖@cveNotify
🚨 CVE-2026-14474
A flaw was found in SSSD's LDAP sudo provider. When the ldap_sudo_search_base option is not explicitly configured, SSSD searches the entire LDAP directory tree for sudoRole objects. An authenticated attacker with write access to any subtree can inject a sudoRole object granting root-level sudo privileges on all SSSD-enrolled hosts.
🎖@cveNotify
A flaw was found in SSSD's LDAP sudo provider. When the ldap_sudo_search_base option is not explicitly configured, SSSD searches the entire LDAP directory tree for sudoRole objects. An authenticated attacker with write access to any subtree can inject a sudoRole object granting root-level sudo privileges on all SSSD-enrolled hosts.
🎖@cveNotify
🚨 CVE-2026-14476
A path traversal flaw was found in SSSD's AD GPO provider. The ad_gpo_extract_smb_components() function does not sanitize .. sequences in the gPCFileSysPath LDAP attribute, allowing an attacker with AD GPO management access to write files outside the GPO cache directory as root. On default RHEL configurations with SELinux enforcing, this can be used to inject Kerberos configuration leading to authentication bypass.
🎖@cveNotify
A path traversal flaw was found in SSSD's AD GPO provider. The ad_gpo_extract_smb_components() function does not sanitize .. sequences in the gPCFileSysPath LDAP attribute, allowing an attacker with AD GPO management access to write files outside the GPO cache directory as root. On default RHEL configurations with SELinux enforcing, this can be used to inject Kerberos configuration leading to authentication bypass.
🎖@cveNotify
🚨 CVE-2026-64070
In the Linux kernel, the following vulnerability has been resolved:
powerpc/hv-gpci: fix preempt count leak in sysfs show paths
Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb)
(which calls preempt_disable()) but only call the matching put_cpu_var()
on the error path under the 'out:' label. Every successful read leaks
one preempt_disable():
processor_bus_topology_show()
processor_config_show()
affinity_domain_via_virtual_processor_show()
affinity_domain_via_domain_show()
(affinity_domain_via_partition_show() was already correct.)
On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and
eventually return to userspace with preemption still disabled. The
next user-mode page fault then hits faulthandler_disabled() == 1,
gets forced to SIGSEGV, and the resulting coredump trips
'BUG: scheduling while atomic' in call_usermodehelper_exec ->
wait_for_completion_state -> schedule:
BUG: scheduling while atomic: <task>/<pid>/0x00000004
...
__schedule_bug+0x6c/0x90
__schedule+0x58c/0x13a0
schedule+0x48/0x1a0
schedule_timeout+0x104/0x170
wait_for_completion_state+0x16c/0x330
call_usermodehelper_exec+0x254/0x2d0
vfs_coredump+0x1050/0x2590
get_signal+0xb9c/0xc80
do_notify_resume+0xf8/0x470
Add an out_success label that calls put_cpu_var() before returning
the byte count, mirroring affinity_domain_via_partition_show().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
powerpc/hv-gpci: fix preempt count leak in sysfs show paths
Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb)
(which calls preempt_disable()) but only call the matching put_cpu_var()
on the error path under the 'out:' label. Every successful read leaks
one preempt_disable():
processor_bus_topology_show()
processor_config_show()
affinity_domain_via_virtual_processor_show()
affinity_domain_via_domain_show()
(affinity_domain_via_partition_show() was already correct.)
On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and
eventually return to userspace with preemption still disabled. The
next user-mode page fault then hits faulthandler_disabled() == 1,
gets forced to SIGSEGV, and the resulting coredump trips
'BUG: scheduling while atomic' in call_usermodehelper_exec ->
wait_for_completion_state -> schedule:
BUG: scheduling while atomic: <task>/<pid>/0x00000004
...
__schedule_bug+0x6c/0x90
__schedule+0x58c/0x13a0
schedule+0x48/0x1a0
schedule_timeout+0x104/0x170
wait_for_completion_state+0x16c/0x330
call_usermodehelper_exec+0x254/0x2d0
vfs_coredump+0x1050/0x2590
get_signal+0xb9c/0xc80
do_notify_resume+0xf8/0x470
Add an out_success label that calls put_cpu_var() before returning
the byte count, mirroring affinity_domain_via_partition_show().
🎖@cveNotify
🚨 CVE-2026-64071
In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix use-after-free in nvme_free_host_mem()
nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous()
but never clears the pointer afterward. This leads to a use-after-free
if nvme_free_host_mem() is called twice in the same error path.
This can happen during nvme_probe() when nvme_setup_host_mem() succeeds
in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem()
fails with an I/O error:
nvme_setup_host_mem()
nvme_alloc_host_mem_single() -> sets dev->hmb_sgt
nvme_set_host_mem() -> fails with -EIO
nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it
return error
nvme_probe() error path:
nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free
The second call dereferences the freed sgt, causing a NULL pointer
dereference in iommu_dma_free_noncontiguous() when it accesses
sgt->sgl->dma_address (the backing memory has been freed and zeroed).
This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC
Envoy Express behind a Dell WD22TB4 dock) where the device intermittently
returns I/O errors during HMB setup due to PCIe link instability.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80
Call Trace:
<TASK>
dma_free_noncontiguous+0x3b/0x130
nvme_free_host_mem+0x30/0xf0 [nvme]
nvme_probe.cold+0xcc/0x275 [nvme]
local_pci_probe+0x43/0xa0
pci_device_probe+0xeea/0x290
really_probe+0xf9/0x3b0
__driver_probe_device+0x8b/0x170
driver_probe_device+0x24/0xd0
__driver_attach_async_helper+0x6b/0x110
async_run_entry_fn+0x37/0x170
process_one_work+0x1ac/0x3d0
worker_thread+0x1b8/0x360
kthread+0xf7/0x130
ret_from_fork+0x2d8/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by setting dev->hmb_sgt to NULL after freeing it, so the
second call takes the multi-descriptor path which safely handles the
already-cleaned-up state.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix use-after-free in nvme_free_host_mem()
nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous()
but never clears the pointer afterward. This leads to a use-after-free
if nvme_free_host_mem() is called twice in the same error path.
This can happen during nvme_probe() when nvme_setup_host_mem() succeeds
in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem()
fails with an I/O error:
nvme_setup_host_mem()
nvme_alloc_host_mem_single() -> sets dev->hmb_sgt
nvme_set_host_mem() -> fails with -EIO
nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it
return error
nvme_probe() error path:
nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free
The second call dereferences the freed sgt, causing a NULL pointer
dereference in iommu_dma_free_noncontiguous() when it accesses
sgt->sgl->dma_address (the backing memory has been freed and zeroed).
This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC
Envoy Express behind a Dell WD22TB4 dock) where the device intermittently
returns I/O errors during HMB setup due to PCIe link instability.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80
Call Trace:
<TASK>
dma_free_noncontiguous+0x3b/0x130
nvme_free_host_mem+0x30/0xf0 [nvme]
nvme_probe.cold+0xcc/0x275 [nvme]
local_pci_probe+0x43/0xa0
pci_device_probe+0xeea/0x290
really_probe+0xf9/0x3b0
__driver_probe_device+0x8b/0x170
driver_probe_device+0x24/0xd0
__driver_attach_async_helper+0x6b/0x110
async_run_entry_fn+0x37/0x170
process_one_work+0x1ac/0x3d0
worker_thread+0x1b8/0x360
kthread+0xf7/0x130
ret_from_fork+0x2d8/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by setting dev->hmb_sgt to NULL after freeing it, so the
second call takes the multi-descriptor path which safely handles the
already-cleaned-up state.
🎖@cveNotify
🚨 CVE-2026-49332
A flaw was found in openshift/oauth-proxy. The proxy sets authenticated identity headers using only dash-variant keys (X-Forwarded-User) but does not strip underscore-variant keys (X_Forwarded_User) from incoming requests. WSGI and PHP frameworks normalize both variants to the same variable, allowing an authenticated low-privilege user to smuggle a forged identity that may override the legitimate authenticated identity in the upstream application.
🎖@cveNotify
A flaw was found in openshift/oauth-proxy. The proxy sets authenticated identity headers using only dash-variant keys (X-Forwarded-User) but does not strip underscore-variant keys (X_Forwarded_User) from incoming requests. WSGI and PHP frameworks normalize both variants to the same variable, allowing an authenticated low-privilege user to smuggle a forged identity that may override the legitimate authenticated identity in the upstream application.
🎖@cveNotify
🚨 CVE-2026-50236
An authenticated SSRF flaw was found in the OpenShift Console Dev Console webhook helpers. User-supplied target URLs are fetched server-side without validation, with path neutralization enabling arbitrary endpoint targeting and full response reflection from the console pod's privileged network position.
🎖@cveNotify
An authenticated SSRF flaw was found in the OpenShift Console Dev Console webhook helpers. User-supplied target URLs are fetched server-side without validation, with path neutralization enabling arbitrary endpoint targeting and full response reflection from the console pod's privileged network position.
🎖@cveNotify
🚨 CVE-2026-71574
Joomla! Core - [20260803] - Inconsistent ACL checks for mutating webservice endpoints in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper access check allows unauthorized users to perform mutation actions in webservice endpoints, where the same mutation was restricted in the backend UI.
🎖@cveNotify
Joomla! Core - [20260803] - Inconsistent ACL checks for mutating webservice endpoints in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper access check allows unauthorized users to perform mutation actions in webservice endpoints, where the same mutation was restricted in the backend UI.
🎖@cveNotify
Joomla! Developer Networkâ„¢
Joomla! Developer Network
The Flexible Platform Empowering Website Creators
🚨 CVE-2026-72532
Joomla! Core - [20260806] - Improper ACL checks for category webservice endpoints in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper access check allows unauthorized users to create categories via webservices endpoints.
🎖@cveNotify
Joomla! Core - [20260806] - Improper ACL checks for category webservice endpoints in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper access check allows unauthorized users to create categories via webservices endpoints.
🎖@cveNotify
Joomla! Developer Networkâ„¢
Joomla! Developer Network
The Flexible Platform Empowering Website Creators
🚨 CVE-2026-73337
Joomla! Core - [20260807] - MFA Authentication Bypass in Joomla 4.0.0-5.4.7 and 6.0.0-6.1.2 - Insufficient state checks lead to a vector that allows to bypass 2FA checks.
🎖@cveNotify
Joomla! Core - [20260807] - MFA Authentication Bypass in Joomla 4.0.0-5.4.7 and 6.0.0-6.1.2 - Insufficient state checks lead to a vector that allows to bypass 2FA checks.
🎖@cveNotify
Joomla! Developer Networkâ„¢
Joomla! Developer Network
The Flexible Platform Empowering Website Creators
🚨 CVE-2026-73371
Joomla! Core - [20260808] - Improper ACL checks for batch copy actions in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper access check allows unauthorized users to perform copy batch operations on uneditable items.
🎖@cveNotify
Joomla! Core - [20260808] - Improper ACL checks for batch copy actions in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper access check allows unauthorized users to perform copy batch operations on uneditable items.
🎖@cveNotify
Joomla! Developer Networkâ„¢
Joomla! Developer Network
The Flexible Platform Empowering Website Creators
🚨 CVE-2026-73373
Joomla! Core - [20260810] - Unrestricted uploads of SHTML files in Joomla 1.0.0-5.4.7, 6.0.0-6.1.2 - The default list of dangerous files did not include SHTML files. On servers that executed these files, that could lead to code execution.
🎖@cveNotify
Joomla! Core - [20260810] - Unrestricted uploads of SHTML files in Joomla 1.0.0-5.4.7, 6.0.0-6.1.2 - The default list of dangerous files did not include SHTML files. On servers that executed these files, that could lead to code execution.
🎖@cveNotify
Joomla! Developer Networkâ„¢
Joomla! Developer Network
The Flexible Platform Empowering Website Creators
🚨 CVE-2026-71572
Joomla! Core - [20260801] - Response header injection in download views in Joomla 3.0.0-5.4.7, 6.0.0-6.1.2 - Lack of output processing allowed a header injection in the multiple download views, leading to reflected file download / content-type confusion.
🎖@cveNotify
Joomla! Core - [20260801] - Response header injection in download views in Joomla 3.0.0-5.4.7, 6.0.0-6.1.2 - Lack of output processing allowed a header injection in the multiple download views, leading to reflected file download / content-type confusion.
🎖@cveNotify
Joomla! Developer Networkâ„¢
Joomla! Developer Network
The Flexible Platform Empowering Website Creators
🚨 CVE-2026-71573
Joomla! Core - [20260802] - Improper CORS origin validation in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper implementation prevented configured CORS origins from being properly validated in CORS requests.
🎖@cveNotify
Joomla! Core - [20260802] - Improper CORS origin validation in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper implementation prevented configured CORS origins from being properly validated in CORS requests.
🎖@cveNotify
🚨 CVE-2026-72531
Joomla! Core - [20260804] - Improper ACL checks for custom fields webservice endpoints in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper access check allows unauthorized users to create fields for inaccessible components.
🎖@cveNotify
Joomla! Core - [20260804] - Improper ACL checks for custom fields webservice endpoints in Joomla 4.0.0-5.4.7, 6.0.0-6.1.2 - An improper access check allows unauthorized users to create fields for inaccessible components.
🎖@cveNotify