🚨 CVE-2025-13823
A security issue was found in the IPv6 stack in the Micro850 and Micro870 controllers when the controllers received multiple malformed packets during fuzzing. The controllers will go into recoverable fault with fault code 0xFE60. To recover the controller, clear the fault.

🎖@cveNotify

🚨 CVE-2025-13824
A security issue exists due to improper handling of malformed CIP packets during fuzzing. The controller enters a hard fault with solid red Fault LED and becomes unresponsive. Upon power cycle, the controller will enter recoverable fault where the MS LED and Fault LED become flashing red and reports fault code 0xF019. To recover, clear the fault.

🎖@cveNotify

🚨 CVE-2025-13844
CWE-415: Double Free vulnerability exists that could cause heap memory corruption when the end user imports a malicious project file (SSD file) shared by the attacker into Rapsody.

🎖@cveNotify

🚨 CVE-2025-13818
Local privilege escalation vulnerability via insecure temporary batch file execution in ESET Management Agent

🎖@cveNotify

🚨 CVE-2025-13822
MCPHub in versions below 0.11.0 is vulnerable to authentication bypass. Some endpoints are not protected by authentication middleware, allowing an unauthenticated attacker to perform actions in the name of other users and using their privileges.

🎖@cveNotify

🚨 CVE-2025-29923
go-redis is the official Redis client library for the Go programming language. Prior to 9.5.5, 9.6.3, and 9.7.2, go-redis potentially responds out of order when `CLIENT SETINFO` times out during connection establishment. This can happen when the client is configured to transmit its identity, there are network connectivity issues, or the client was configured with aggressive timeouts. The problem occurs for multiple use cases. For sticky connections, you receive persistent out-of-order responses for the lifetime of the connection. All commands in the pipeline receive incorrect responses. When used with the default ConnPool once a connection is returned after use with ConnPool#Put the read buffer will be checked and the connection will be marked as bad due to the unread data. This means that at most one out-of-order response before the connection is discarded. This issue is fixed in 9.5.5, 9.6.3, and 9.7.2; however, 9.7.2 has been retracted and 9.7.3 is the lowest available patched version on the 9.7.x branch. As a workaround, set the flag `DisableIndentity` to `true` when constructing the client instance.

🎖@cveNotify

🚨 CVE-2026-15187
A security flaw has been discovered in enquirer up to 2.4.1. Affected is the function Enquirer.set of the component Public Package API. The manipulation of the argument question.name results in improperly controlled modification of object prototype attributes. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report.

🎖@cveNotify

🚨 CVE-2026-15189
A security vulnerability has been detected in aerostackdev aerostack-mcp up to 6315dfde7df0a15aaf743f88d91347115e09ba23. Affected by this issue is the function upload_media of the component mcp-whatsapp. Such manipulation of the argument media_url leads to server-side request forgery. The attack may be launched remotely. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-15191
A flaw has been found in mettle sendportal up to 3.0.1. This vulnerability affects unknown code of the file vendor/mettle/sendportal-core/src/Http/Requests/CampaignStoreRequest.php of the component Campaign Creation Endpoint. Executing a manipulation can lead to authorization bypass. The attack can be executed remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-15192
A vulnerability has been found in mettle sendportal up to 3.0.1. This issue affects the function sendgrid/postmark/postal/mailjet of the component APIv1 Webhooks. The manipulation leads to missing authentication. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

🎖@cveNotify

🚨 CVE-2026-15194
A security flaw has been discovered in Open5GS 2.7.7. This affects the function amf_context_final of the file src/amf/context.c of the component AMF. Performing a manipulation results in use after free. The attack is only possible with local access. The exploit has been released to the public and may be used for attacks.

🎖@cveNotify

🚨 CVE-2026-15270
A weakness has been identified in D-link DIR-823G 1.0.2B05_20181207. Affected by this vulnerability is an unknown functionality of the file /etc/boa/boa.conf of the component Web Interface. Executing a manipulation can lead to least privilege violation. The attack can be launched remotely. The attack requires a high level of complexity. The exploitation appears to be difficult. The exploit has been made available to the public and could be used for attacks.

🎖@cveNotify

🚨 CVE-2026-15271
A security vulnerability has been detected in TOTOLINK A3000RU, A3100R, A950RG, AC1200T10, CP450, CS185R_T10 and EX200 up to 20260906. Affected by this issue is some unknown functionality of the file /etc/boa/boa.conf of the component Web Interface. The manipulation leads to least privilege violation. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitation is known to be difficult.

🎖@cveNotify

🚨 CVE-2026-15276
A flaw has been found in pdeljanov Symphonia up to 0.6.0. This vulnerability affects unknown code of the component Metadata Handler. This manipulation causes denial of service. The attack needs to be launched locally. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance.

🎖@cveNotify

🚨 CVE-2026-15305
Users were able to upload files with arbitrary MIME types to forms using FileUpload or ImageUpload elements with allowedMimeTypes configured. The restriction was not enforced server-side because the MimeTypeValidator was registered during form building before concrete form definition properties were applied, resulting in the validator never being added to the processing pipeline. This issue affects TYPO3 CMS versions 14.2.0-14.3.4.

🎖@cveNotify

🚨 CVE-2026-15243
Apereo CAS Client accepts any CA-trusted certificate for any hostname, provided the URL the client is calling matches the configured allowlist or regex. An attacker with a MITM position (DNS poisoning, rogue Wi-Fi, malicious proxy, etc.) can provide any CA-signed certificate for a hostname that matches the configured allowlist or regex. This can lead to intercepting the CAS exchange, capturing the Ticket-Granting Ticket (TGT), and subsequently obtaining Service Tickets on behalf of the victim. 


Because maintainers contact attempts were unsuccessful, vulnerabilities have only been confirmed in version 4.1.0 (Java Apereo CAS Client) and 3.6.4 (Jasig CAS Client) but may also affect other versions.

🎖@cveNotify

🚨 CVE-2026-15227
Missing authorization in Checkmk <2.5.0p10, <2.4.0p35, <2.3.0p49, and 2.2.0 (EOL) allows an authenticated user lacking the "Edit foreign Reports" permission to modify reports owned by other users.

🎖@cveNotify

🚨 CVE-2026-80184
In OpenStack Keystone before 29.0.3, tokens obtained via delegated authentication mechanisms (OAuth1 access tokens, application credentials, trusts) could be submitted to the token-method authentication path for reauthentication to escape their intended project scope. When an application credential token was presented with no explicit scope, Keystone would issue a new token scoped to the credential owner's default project rather than the project for which the credential was issued, bypassing the intended project boundary. All Keystone deployments that permit delegated authentication through OAuth1 access tokens, application credentials, or trusts are affected.

🎖@cveNotify

🚨 CVE-2026-80138
ClipBucket V5's web installer fails to properly validate or escape the php_cli_filepath parameter before passing it to shell execution. Unauthenticated attackers can submit a crafted POST request to the installer with a malicious php_cli_filepath value to execute arbitrary commands as the web server user.

🎖@cveNotify

🚨 CVE-2026-80195
Kimai before 2.63.0 contains a business logic / improper authorization vulnerability in the team update API endpoint (PATCH /api/teams/{id}), which removes all existing team members before validating the submitted replacement member list. An authenticated teamlead (or other user) with permission to edit a team can submit a malformed members payload; although Kimai returns a validation error, the existing membership rows have already been deleted. This bypasses the dedicated member-removal endpoint's protection against removing teamleaders and can leave a team with no members or teamleaders, disrupting team-based access control.

🎖@cveNotify

🚨 CVE-2026-80202
Kimai before 2.56.0 does not enforce team-membership checks in TimesheetVoter::voteOnAttribute(), which maps permissions only to own_timesheet or other_timesheet. As a result, any authenticated user with ROLE_TEAMLEAD (or a role holding edit_other_timesheet/delete_other_timesheet) can read, modify, and permanently delete timesheets belonging to any user system-wide via the API, regardless of team membership. Timesheet IDs are sequential integers and trivially enumerable. ROLE_USER accounts are correctly restricted. (Note: the maintainers characterize this behavior as matching the documented permission model.)

🎖@cveNotify