🚨 CVE-2026-72630
Incorrect Authorization (CWE-863) in Kibana Fleet can lead to privilege escalation via Privilege Abuse (CAPEC-122). Fleet restricts some callers to managing integration policies for one specific integration. When an existing integration policy was updated, that restriction was evaluated against the integration recorded on the stored policy rather than against the replacement integration supplied with the update. An authenticated user holding only the Elastic Defend endpoint policy management privilege was therefore able to convert an endpoint policy they administer into a policy for a different integration, and to supply that integration's configuration at the same time.

🎖@cveNotify

🚨 CVE-2026-72631
Improper Privilege Management (CWE-269) in Kibana Fleet can lead to privilege escalation via Privilege Escalation (CAPEC-233). An integration policy may optionally declare extra data streams that the integration writes to, which Fleet adds to the Elasticsearch API key issued to Elastic Agents enrolled in the corresponding agent policy. The resulting key allows new documents to be inserted and index mappings to be extended for specific indices. The key does not allow reading, updating, or deleting existing documents

🎖@cveNotify

🚨 CVE-2026-16137
In Progress ShareFile Storage Zones Controller v5.12.5 and below, a party with valid zone credentials can perform path traversal using resumable upload initiation endpoint, allowing the party to write arbitrary content to any location writable by the application's service account. This may result in the execution of attacker-supplied code.

🎖@cveNotify

🚨 CVE-2026-16138
In Progress ShareFile Storage Zones Controller v5.12.5 and below versions, unsafe deserialization of untrusted file metadata can allow a user with write access to a Network share to execute arbitrary code on the Storage Zones Controller host.

🎖@cveNotify

🚨 CVE-2026-16139
In Progress ShareFile Storage Zones Controller versions <= 5.12.5 and <= 6.0.2, an authenticated zone administrator can exploit improper validation in the download preparation flow, enabling attacker-controlled files to be written outside the intended preparation directory. This can lead to remote code execution in v5 versions. Remote code execution is not confirmed on v6 versions.

🎖@cveNotify

🚨 CVE-2026-18297
GStreamer OGG File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.

The specific flaw exists within the parsing of OGG files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29584.

🎖@cveNotify

🚨 CVE-2026-18298
GStreamer PNG File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.

The specific flaw exists within the parsing of PNG files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29581.

🎖@cveNotify

🚨 CVE-2026-18299
GStreamer rtpsbcdepay Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.

The specific flaw exists within the processing of RTP payload elements. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29787.

🎖@cveNotify

🚨 CVE-2026-18309
GIMP APNG File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.

The specific flaw exists within the parsing of APNG files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29401.

🎖@cveNotify

🚨 CVE-2026-61419
Dell ThinOS 10, versions prior to 2605_10.2518, contain an Improper Access Control vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Unauthorized access.

🎖@cveNotify

🚨 CVE-2026-80101
A flaw was found in the file-xwd plugin in GIMP. When processing a specially crafted XWD image file, the plugin validates the image width and bytes-per-line parameters independently rather than ensuring their combined values are consistent with the allocated buffer size. This incorrect validation leads to improper bounds checking, causing a heap out-of-bounds read. This issue can result in an application crash, leading to a denial of service or a limited information disclosure of heap memory contents into the produced image.

🎖@cveNotify

🚨 CVE-2026-82329
JFrog Artifactory contains an authentication weakness that, under default configuration, may allow an unauthenticated attacker with network access to obtain administrative privileges.

🎖@cveNotify

🚨 CVE-2026-82474
Sudo through 1.9.17p2 fails to apply intercept policy checks to the execveat system call in ptrace-based intercept mode. Users permitted to run specific commands can execute denied programs by calling execveat directly or through fexecve, bypassing policy enforcement and logging.

🎖@cveNotify

🚨 CVE-2026-82637
browser-use web-ui versions 2.0.0 through 3.0.0 fail to validate browser settings paths in run_agent_task, allowing attackers to create directories at arbitrary locations by supplying absolute paths to save_recording_path, save_trace_path, save_agent_history_path, or save_download_path parameters. Attackers can exploit this via the unauthenticated Gradio interface to create directories anywhere the root-running container has write access.

🎖@cveNotify

🚨 CVE-2026-62993
Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. Prior to 4.5.7 and 5.8.2, depending on the release line, Smarty's {fetch} handling in libs/plugins/function.fetch.php and src/FunctionHandler/Fetch.php used Security::isTrustedUri() to validate only the initial remote URL against trusted_uri when a security policy was active. For resources handled by file_get_contents(), including HTTPS URLs, PHP followed HTTP redirects by default. An attacker who could supply or influence a fetch target and had an open redirect on a trusted host could redirect the request to an attacker-chosen internal endpoint, bypass the trusted_uri allowlist, and perform server-side request forgery. This issue is fixed in versions 4.5.7 and 5.8.2.

🎖@cveNotify

🚨 CVE-2026-81765
Unauthenticated Cross Site Scripting (XSS) in Tailored Tools <= 3.0.2 versions.

🎖@cveNotify

🚨 CVE-2026-82224
Unauthenticated Cross Site Scripting (XSS) in SliceWP <= 1.2.10 versions.

🎖@cveNotify

🚨 CVE-2026-82394
Sulu is an open-source PHP content management system based on the Symfony framework. Prior to versions 2.6.25 and 3.0.8, the preview-link endpoint and src/Sulu/Bundle/PreviewBundle/Application/Manager/PreviewLinkManager.php do not enforce VIEW permission for the target resource in PreviewLinkManager::generate() or PreviewLinkManager::revoke(). An authenticated administration user who knows a target resource identifier can create or revoke a preview link for any page, article, or snippet, including content in a webspace or area the user cannot view. A generated preview URL is public and resolves content by an opaque token, allowing the user or anyone receiving the link to read restricted content without authentication. This issue is fixed in versions 2.6.25 and 3.0.8.

🎖@cveNotify

🚨 CVE-2026-82397
Tornado is a Python web framework and asynchronous networking library. Prior to 6.5.8, Tornado parses application/x-www-form-urlencoded request bodies with urllib.parse.parse_qs in tornado/escape.py without passing max_num_fields. RequestHandler._execute in tornado/web.py parses the body before handler dispatch through HTTPServerRequest._parse_body and parse_body_arguments in tornado/httputil.py, so an unauthenticated request body containing millions of separator-delimited fields can synchronously stall the single-threaded event loop and delay every connection. The body is bounded only by max_buffer_size, which defaults to 104857600 bytes. This issue is fixed in version 6.5.8.

🎖@cveNotify

🚨 CVE-2026-82954
A vulnerability was detected in Dokploy up to 0.29.7. This issue affects the function writeTraefikConfigInPath of the file packages/server/src/utils/traefik/application.ts of the component Settings. The manipulation of the argument path results in path traversal. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-76006
The Photo Gallery by Ays – Responsive Image Gallery plugin for WordPress is vulnerable to generic SQL Injection via the 's' parameter in all versions up to, and including, 6.8.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The vulnerability exists across two execution paths — $wpdb->get_var() in record_count() and $wpdb->get_results() in prepare_items()/get_image_categories() — enabling both blind and UNION-based exfiltration techniques.

🎖@cveNotify