🚨 CVE-2026-61767
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61768
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61769
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61770
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61772
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61773
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61774
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61775
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61776
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61777
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61778
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2026-61779
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
NVIDIA Megatron Bridge contains a vulnerability where an attacker could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.
🎖@cveNotify
🚨 CVE-2024-27010
In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix mirred deadlock on device recursion
When the mirred action is used on a classful egress qdisc and a packet is
mirrored or redirected to self we hit a qdisc lock deadlock.
See trace below.
[..... other info removed for brevity....]
[ 82.890906]
[ 82.890906] ============================================
[ 82.890906] WARNING: possible recursive locking detected
[ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W
[ 82.890906] --------------------------------------------
[ 82.890906] ping/418 is trying to acquire lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] but task is already holding lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] other info that might help us debug this:
[ 82.890906] Possible unsafe locking scenario:
[ 82.890906]
[ 82.890906] CPU0
[ 82.890906] ----
[ 82.890906] lock(&sch->q.lock);
[ 82.890906] lock(&sch->q.lock);
[ 82.890906]
[ 82.890906] *** DEADLOCK ***
[ 82.890906]
[..... other info removed for brevity....]
Example setup (eth0->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
Another example(eth0->eth1->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth1
tc qdisc add dev eth1 root handle 1: htb default 30
tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
We fix this by adding an owner field (CPU id) to struct Qdisc set after
root qdisc is entered. When the softirq enters it a second time, if the
qdisc owner is the same CPU, the packet is dropped to break the loop.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix mirred deadlock on device recursion
When the mirred action is used on a classful egress qdisc and a packet is
mirrored or redirected to self we hit a qdisc lock deadlock.
See trace below.
[..... other info removed for brevity....]
[ 82.890906]
[ 82.890906] ============================================
[ 82.890906] WARNING: possible recursive locking detected
[ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W
[ 82.890906] --------------------------------------------
[ 82.890906] ping/418 is trying to acquire lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] but task is already holding lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] other info that might help us debug this:
[ 82.890906] Possible unsafe locking scenario:
[ 82.890906]
[ 82.890906] CPU0
[ 82.890906] ----
[ 82.890906] lock(&sch->q.lock);
[ 82.890906] lock(&sch->q.lock);
[ 82.890906]
[ 82.890906] *** DEADLOCK ***
[ 82.890906]
[..... other info removed for brevity....]
Example setup (eth0->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
Another example(eth0->eth1->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth1
tc qdisc add dev eth1 root handle 1: htb default 30
tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
We fix this by adding an owner field (CPU id) to struct Qdisc set after
root qdisc is entered. When the softirq enters it a second time, if the
qdisc owner is the same CPU, the packet is dropped to break the loop.
🎖@cveNotify
🚨 CVE-2024-39478
In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Do not free stack buffer
RSA text data uses variable length buffer allocated in software stack.
Calling kfree on it causes undefined behaviour in subsequent operations.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Do not free stack buffer
RSA text data uses variable length buffer allocated in software stack.
Calling kfree on it causes undefined behaviour in subsequent operations.
🎖@cveNotify
🚨 CVE-2024-46754
In the Linux kernel, the following vulnerability has been resolved:
bpf: Remove tst_run from lwt_seg6local_prog_ops.
The syzbot reported that the lwt_seg6 related BPF ops can be invoked
via bpf_test_run() without without entering input_action_end_bpf()
first.
Martin KaFai Lau said that self test for BPF_PROG_TYPE_LWT_SEG6LOCAL
probably didn't work since it was introduced in commit 04d4b274e2a
("ipv6: sr: Add seg6local action End.BPF"). The reason is that the
per-CPU variable seg6_bpf_srh_states::srh is never assigned in the self
test case but each BPF function expects it.
Remove test_run for BPF_PROG_TYPE_LWT_SEG6LOCAL.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
bpf: Remove tst_run from lwt_seg6local_prog_ops.
The syzbot reported that the lwt_seg6 related BPF ops can be invoked
via bpf_test_run() without without entering input_action_end_bpf()
first.
Martin KaFai Lau said that self test for BPF_PROG_TYPE_LWT_SEG6LOCAL
probably didn't work since it was introduced in commit 04d4b274e2a
("ipv6: sr: Add seg6local action End.BPF"). The reason is that the
per-CPU variable seg6_bpf_srh_states::srh is never assigned in the self
test case but each BPF function expects it.
Remove test_run for BPF_PROG_TYPE_LWT_SEG6LOCAL.
🎖@cveNotify
🚨 CVE-2024-58094
In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before truncation in jfs_truncate_nolock()
Added a check for "read-only" mode in the `jfs_truncate_nolock`
function to avoid errors related to writing to a read-only
filesystem.
Call stack:
block_write_begin() {
jfs_write_failed() {
jfs_truncate() {
jfs_truncate_nolock() {
txEnd() {
...
log = JFS_SBI(tblk->sb)->log;
// (log == NULL)
If the `isReadOnly(ip)` condition is triggered in
`jfs_truncate_nolock`, the function execution will stop, and no
further data modification will occur. Instead, the `xtTruncate`
function will be called with the "COMMIT_WMAP" flag, preventing
modifications in "read-only" mode.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before truncation in jfs_truncate_nolock()
Added a check for "read-only" mode in the `jfs_truncate_nolock`
function to avoid errors related to writing to a read-only
filesystem.
Call stack:
block_write_begin() {
jfs_write_failed() {
jfs_truncate() {
jfs_truncate_nolock() {
txEnd() {
...
log = JFS_SBI(tblk->sb)->log;
// (log == NULL)
If the `isReadOnly(ip)` condition is triggered in
`jfs_truncate_nolock`, the function execution will stop, and no
further data modification will occur. Instead, the `xtTruncate`
function will be called with the "COMMIT_WMAP" flag, preventing
modifications in "read-only" mode.
🎖@cveNotify
🚨 CVE-2024-58095
In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before txBeginAnon() call
Added a read-only check before calling `txBeginAnon` in `extAlloc`
and `extRecord`. This prevents modification attempts on a read-only
mounted filesystem, avoiding potential errors or crashes.
Call trace:
txBeginAnon+0xac/0x154
extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78
jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248
__block_write_begin_int+0x580/0x166c fs/buffer.c:2128
__block_write_begin fs/buffer.c:2177 [inline]
block_write_begin+0x98/0x11c fs/buffer.c:2236
jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before txBeginAnon() call
Added a read-only check before calling `txBeginAnon` in `extAlloc`
and `extRecord`. This prevents modification attempts on a read-only
mounted filesystem, avoiding potential errors or crashes.
Call trace:
txBeginAnon+0xac/0x154
extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78
jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248
__block_write_begin_int+0x580/0x166c fs/buffer.c:2128
__block_write_begin fs/buffer.c:2177 [inline]
block_write_begin+0x98/0x11c fs/buffer.c:2236
jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299
🎖@cveNotify
🚨 CVE-2025-22104
In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Use kernel helpers for hex dumps
Previously, when the driver was printing hex dumps, the buffer was cast
to an 8 byte long and printed using string formatters. If the buffer
size was not a multiple of 8 then a read buffer overflow was possible.
Therefore, create a new ibmvnic function that loops over a buffer and
calls hex_dump_to_buffer instead.
This patch address KASAN reports like the one below:
ibmvnic 30000003 env3: Login Buffer:
ibmvnic 30000003 env3: 01000000af000000
<...>
ibmvnic 30000003 env3: 2e6d62692e736261
ibmvnic 30000003 env3: 65050003006d6f63
==================================================================
BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic]
Read of size 8 at addr c0000001331a9aa8 by task ip/17681
<...>
Allocated by task 17681:
<...>
ibmvnic_login+0x2f0/0xffc [ibmvnic]
ibmvnic_open+0x148/0x308 [ibmvnic]
__dev_open+0x1ac/0x304
<...>
The buggy address is located 168 bytes inside of
allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf)
<...>
=================================================================
ibmvnic 30000003 env3: 000000000033766e
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Use kernel helpers for hex dumps
Previously, when the driver was printing hex dumps, the buffer was cast
to an 8 byte long and printed using string formatters. If the buffer
size was not a multiple of 8 then a read buffer overflow was possible.
Therefore, create a new ibmvnic function that loops over a buffer and
calls hex_dump_to_buffer instead.
This patch address KASAN reports like the one below:
ibmvnic 30000003 env3: Login Buffer:
ibmvnic 30000003 env3: 01000000af000000
<...>
ibmvnic 30000003 env3: 2e6d62692e736261
ibmvnic 30000003 env3: 65050003006d6f63
==================================================================
BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic]
Read of size 8 at addr c0000001331a9aa8 by task ip/17681
<...>
Allocated by task 17681:
<...>
ibmvnic_login+0x2f0/0xffc [ibmvnic]
ibmvnic_open+0x148/0x308 [ibmvnic]
__dev_open+0x1ac/0x304
<...>
The buggy address is located 168 bytes inside of
allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf)
<...>
=================================================================
ibmvnic 30000003 env3: 000000000033766e
🎖@cveNotify
🚨 CVE-2025-38203
In the Linux kernel, the following vulnerability has been resolved:
jfs: Fix null-ptr-deref in jfs_ioc_trim
[ Syzkaller Report ]
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000087: 0000 [#1
KASAN: null-ptr-deref in range [0x0000000000000438-0x000000000000043f]
CPU: 2 UID: 0 PID: 10614 Comm: syz-executor.0 Not tainted
6.13.0-rc6-gfbfd64d25c7a-dirty #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Sched_ext: serialise (enabled+all), task: runnable_at=-30ms
RIP: 0010:jfs_ioc_trim+0x34b/0x8f0
Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93
90 82 fe ff 4c 89 ff 31 f6
RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206
RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a
RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001
RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000
R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438
FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body+0x61/0xb0
? die_addr+0xb1/0xe0
? exc_general_protection+0x333/0x510
? asm_exc_general_protection+0x26/0x30
? jfs_ioc_trim+0x34b/0x8f0
jfs_ioctl+0x3c8/0x4f0
? __pfx_jfs_ioctl+0x10/0x10
? __pfx_jfs_ioctl+0x10/0x10
__se_sys_ioctl+0x269/0x350
? __pfx___se_sys_ioctl+0x10/0x10
? do_syscall_64+0xfb/0x210
do_syscall_64+0xee/0x210
? syscall_exit_to_user_mode+0x1e0/0x330
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe51f4903ad
Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d
RSP: 002b:00007fe5202250c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fe51f5cbf80 RCX: 00007fe51f4903ad
RDX: 0000000020000680 RSI: 00000000c0185879 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe520225640
R13: 000000000000000e R14: 00007fe51f44fca0 R15: 00007fe52021d000
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:jfs_ioc_trim+0x34b/0x8f0
Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93
90 82 fe ff 4c 89 ff 31 f6
RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206
RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a
RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001
RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000
R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438
FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Kernel panic - not syncing: Fatal exception
[ Analysis ]
We believe that we have found a concurrency bug in the `fs/jfs` module
that results in a null pointer dereference. There is a closely related
issue which has been fixed:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234
... but, unfortunately, the accepted patch appears to still be
susceptible to a null pointer dereference under some interleavings.
To trigger the bug, we think that `JFS_SBI(ipbmap->i_sb)->bmap` is set
to NULL in `dbFreeBits` and then dereferenced in `jfs_ioc_trim`. This
bug manifests quite rarely under normal circumstances, but is
triggereable from a syz-program.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
jfs: Fix null-ptr-deref in jfs_ioc_trim
[ Syzkaller Report ]
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000087: 0000 [#1
KASAN: null-ptr-deref in range [0x0000000000000438-0x000000000000043f]
CPU: 2 UID: 0 PID: 10614 Comm: syz-executor.0 Not tainted
6.13.0-rc6-gfbfd64d25c7a-dirty #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Sched_ext: serialise (enabled+all), task: runnable_at=-30ms
RIP: 0010:jfs_ioc_trim+0x34b/0x8f0
Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93
90 82 fe ff 4c 89 ff 31 f6
RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206
RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a
RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001
RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000
R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438
FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body+0x61/0xb0
? die_addr+0xb1/0xe0
? exc_general_protection+0x333/0x510
? asm_exc_general_protection+0x26/0x30
? jfs_ioc_trim+0x34b/0x8f0
jfs_ioctl+0x3c8/0x4f0
? __pfx_jfs_ioctl+0x10/0x10
? __pfx_jfs_ioctl+0x10/0x10
__se_sys_ioctl+0x269/0x350
? __pfx___se_sys_ioctl+0x10/0x10
? do_syscall_64+0xfb/0x210
do_syscall_64+0xee/0x210
? syscall_exit_to_user_mode+0x1e0/0x330
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe51f4903ad
Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d
RSP: 002b:00007fe5202250c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fe51f5cbf80 RCX: 00007fe51f4903ad
RDX: 0000000020000680 RSI: 00000000c0185879 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe520225640
R13: 000000000000000e R14: 00007fe51f44fca0 R15: 00007fe52021d000
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:jfs_ioc_trim+0x34b/0x8f0
Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93
90 82 fe ff 4c 89 ff 31 f6
RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206
RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a
RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001
RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000
R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438
FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Kernel panic - not syncing: Fatal exception
[ Analysis ]
We believe that we have found a concurrency bug in the `fs/jfs` module
that results in a null pointer dereference. There is a closely related
issue which has been fixed:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234
... but, unfortunately, the accepted patch appears to still be
susceptible to a null pointer dereference under some interleavings.
To trigger the bug, we think that `JFS_SBI(ipbmap->i_sb)->bmap` is set
to NULL in `dbFreeBits` and then dereferenced in `jfs_ioc_trim`. This
bug manifests quite rarely under normal circumstances, but is
triggereable from a syz-program.
🎖@cveNotify
🚨 CVE-2025-38206
In the Linux kernel, the following vulnerability has been resolved:
exfat: fix double free in delayed_free
The double free could happen in the following path.
exfat_create_upcase_table()
exfat_create_upcase_table() : return error
exfat_free_upcase_table() : free ->vol_utbl
exfat_load_default_upcase_table : return error
exfat_kill_sb()
delayed_free()
exfat_free_upcase_table() <--------- double free
This patch set ->vol_util as NULL after freeing it.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
exfat: fix double free in delayed_free
The double free could happen in the following path.
exfat_create_upcase_table()
exfat_create_upcase_table() : return error
exfat_free_upcase_table() : free ->vol_utbl
exfat_load_default_upcase_table : return error
exfat_kill_sb()
delayed_free()
exfat_free_upcase_table() <--------- double free
This patch set ->vol_util as NULL after freeing it.
🎖@cveNotify
🚨 CVE-2025-38237
In the Linux kernel, the following vulnerability has been resolved:
media: platform: exynos4-is: Add hardware sync wait to fimc_is_hw_change_mode()
In fimc_is_hw_change_mode(), the function changes camera modes without
waiting for hardware completion, risking corrupted data or system hangs
if subsequent operations proceed before the hardware is ready.
Add fimc_is_hw_wait_intmsr0_intmsd0() after mode configuration, ensuring
hardware state synchronization and stable interrupt handling.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
media: platform: exynos4-is: Add hardware sync wait to fimc_is_hw_change_mode()
In fimc_is_hw_change_mode(), the function changes camera modes without
waiting for hardware completion, risking corrupted data or system hangs
if subsequent operations proceed before the hardware is ready.
Add fimc_is_hw_wait_intmsr0_intmsd0() after mode configuration, ensuring
hardware state synchronization and stable interrupt handling.
🎖@cveNotify