🚨 CVE-2026-66357
httpd has never implemented obs-fold (RFC 2616 §2.2 / RFC 7230 §3.2.4 header continuation lines). Every CRLF followed by a non-CRLF octet unconditionally starts a new header. This missing feature became a security concern as the understanding of HTTP request smuggling attacks evolved.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
httpd has never implemented obs-fold (RFC 2616 §2.2 / RFC 7230 §3.2.4 header continuation lines). Every CRLF followed by a non-CRLF octet unconditionally starts a new header. This missing feature became a security concern as the understanding of HTTP request smuggling attacks evolved.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-70399
Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by opening and holding open a large number of connections. The max_clients option is documented to default to 150, and the inets hardening guide presents that limit as the first layer of denial-of-service defence, but a server that does not set it explicitly accepts an unlimited number of simultaneous connections. Establishing the connections is sufficient; no valid request and no authentication are required.
The accept gate in httpd_manager:handle_new_connection/4 reads the option with httpd_util:lookup/2, which returns undefined when the key is absent, rather than the three-argument form carrying the 150 default that the neighbouring get_ustate/2 uses. Erlang term ordering places every integer before every atom, so the Count =< Max guard holds for any connection count and the server never returns {reject, busy}. Each accepted connection occupies a worker process and a socket for as long as it is held, driving the node towards process, memory and file descriptor exhaustion. Servers that set max_clients explicitly are unaffected, because a configured value is applied as intended.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by opening and holding open a large number of connections. The max_clients option is documented to default to 150, and the inets hardening guide presents that limit as the first layer of denial-of-service defence, but a server that does not set it explicitly accepts an unlimited number of simultaneous connections. Establishing the connections is sufficient; no valid request and no authentication are required.
The accept gate in httpd_manager:handle_new_connection/4 reads the option with httpd_util:lookup/2, which returns undefined when the key is absent, rather than the three-argument form carrying the 150 default that the neighbouring get_ustate/2 uses. Erlang term ordering places every integer before every atom, so the Count =< Max guard holds for any connection count and the server never returns {reject, busy}. Each accepted connection occupies a worker process and a socket for as long as it is held, driving the node towards process, memory and file descriptor exhaustion. Servers that set max_clients explicitly are unaffected, because a configured value is applied as intended.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
🚨 CVE-2026-71380
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete.
httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete.
httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-71562
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP inets httpc allows a malicious or compromised HTTP server to degrade availability by returning a numeric header whose value is a very long run of digits.
httpc_handler.erl converts the server-supplied Content-Length with list_to_integer/1 before comparing it against max_body_size, so the size check cannot protect the conversion, and the option defaults to nolimit in any case. The same unbounded conversion appears in httpc_response:format_response/1 for Content-Length and in httpc_response:get_ms_from_retry_after/1 for Retry-After, which is guarded only by a check that the first character is a digit. A value of up to roughly 1.26 million digits converts successfully and costs the requesting process hundreds of milliseconds of arbitrary-precision arithmetic per response. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP inets httpc allows a malicious or compromised HTTP server to degrade availability by returning a numeric header whose value is a very long run of digits.
httpc_handler.erl converts the server-supplied Content-Length with list_to_integer/1 before comparing it against max_body_size, so the size check cannot protect the conversion, and the option defaults to nolimit in any case. The same unbounded conversion appears in httpc_response:format_response/1 for Content-Length and in httpc_response:get_ms_from_retry_after/1 for Retry-After, which is guarded only by a check that the first character is a digit. A value of up to roughly 1.26 million digits converts successfully and costs the requesting process hundreds of milliseconds of arbitrary-precision arithmetic per response. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-73270
Improper Handling of Case Sensitivity vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by requesting them with different casing, on deployments whose filesystem is case-insensitive.
mod_auth:secret_path/3 decides whether a resolved filesystem path lies inside a protected directory block by running the configured directory path through re:run/3 without the caseless option. A request for /secret/file against a directory configured as /Secret therefore does not match, so the request is treated as unprotected and no authentication challenge is issued, while the filesystem resolves the differently cased path to the same file and mod_get serves it. Deployments on case-sensitive filesystems are unaffected, because there the filesystem itself rejects the mismatched casing.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Improper Handling of Case Sensitivity vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by requesting them with different casing, on deployments whose filesystem is case-insensitive.
mod_auth:secret_path/3 decides whether a resolved filesystem path lies inside a protected directory block by running the configured directory path through re:run/3 without the caseless option. A request for /secret/file against a directory configured as /Secret therefore does not match, so the request is treated as unprotected and no authentication challenge is issued, while the filesystem resolves the differently cased path to the same file and mod_get serves it. Deployments on case-sensitive filesystems are unaffected, because there the filesystem itself rejects the mismatched casing.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-73276
Gracefulness code ignored cases that should be rejected, resulting in possible HTTP Request Smuggling opportunities.
This issue affects OTP from OTP 22.2 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 7.1.2 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
Gracefulness code ignored cases that should be rejected, resulting in possible HTTP Request Smuggling opportunities.
This issue affects OTP from OTP 22.2 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 7.1.2 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
🚨 CVE-2026-73812
httpd function check_header/3 rejects duplicate Content-Length (per CVE-2026-23941) but never checks for the TE+CL co-presence that RFC 9112 §6.3 identifies as a probable smuggling attempt. handle_body/3 frames by chunked and silently discards Content-Length. A CL-preferring front-end paired with chunked-preferring inets creates a classic CL.TE front-end/back-end desync.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
httpd function check_header/3 rejects duplicate Content-Length (per CVE-2026-23941) but never checks for the TE+CL co-presence that RFC 9112 §6.3 identifies as a probable smuggling attempt. handle_body/3 frames by chunked and silently discards Content-Length. A CL-preferring front-end paired with chunked-preferring inets creates a classic CL.TE front-end/back-end desync.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-74835
The inets application HTTP server httpd fails to enforce a configured body-size limit on chunked request.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
The inets application HTTP server httpd fails to enforce a configured body-size limit on chunked request.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-74994
The mod_auth module in OTP's inets httpd server, when configured with dets or mnesia authentication backends and multiple directory configuration blocks, collapses all directory blocks into a single shared user/group namespace. A user added to one protected directory is accepted as valid for all other protected directories on the same server instance.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
The mod_auth module in OTP's inets httpd server, when configured with dets or mnesia authentication backends and multiple directory configuration blocks, collapses all directory blocks into a single shared user/group namespace. A user added to one protected directory is accepted as valid for all other protected directories on the same server instance.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-75538
An attacker that connects to an open Erlang TCP port that uses the inet driver with {packet,4} mode can use a signed overflow in an incorrect packet length calculation to overflow the receive buffer into the VM allocator area and beyond up to about 2 GB.
This would easily trash the allocated block's allocator metadata footer, and the next block, if any, and most likely cause the BEAM VM to crash. Utilizing this with precision enough to achieve Remote Code Execution would be extremely unfeasible.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to erts from 6.0 before 15.2.7.13, from 16.0 before 16.4.0.6, and from 17.0 before 17.0.6. Whether OTP before OTP 17.0, corresponding to erts before 6.0, is affected is unknown.
🎖@cveNotify
An attacker that connects to an open Erlang TCP port that uses the inet driver with {packet,4} mode can use a signed overflow in an incorrect packet length calculation to overflow the receive buffer into the VM allocator area and beyond up to about 2 GB.
This would easily trash the allocated block's allocator metadata footer, and the next block, if any, and most likely cause the BEAM VM to crash. Utilizing this with precision enough to achieve Remote Code Execution would be extremely unfeasible.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to erts from 6.0 before 15.2.7.13, from 16.0 before 16.4.0.6, and from 17.0 before 17.0.6. Whether OTP before OTP 17.0, corresponding to erts before 6.0, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-78012
An issue in the NetStaX EtherNet/IP Stack prior to v5.6.1 could allow a large Class 3 explicit-message request to exceed the application-side receive buffer without generating an error or warning. The result could be memory corruption, a device crash, or a potential remote attack vector without the originating device receiving a CIP error indicating that the request could not be processed.
🎖@cveNotify
An issue in the NetStaX EtherNet/IP Stack prior to v5.6.1 could allow a large Class 3 explicit-message request to exceed the application-side receive buffer without generating an error or warning. The result could be memory corruption, a device crash, or a potential remote attack vector without the originating device receiving a CIP error indicating that the request could not be processed.
🎖@cveNotify
Pyramid Solutions
NetStaX v5.6.1: Protecting Against Silent Buffer Overflow in EtherNet/IP Stack Explicit Messages | Pyramid Solutions
Discover how NetStaX v5.6.1 strengthens EtherNet/IP device security with buffer-overflow protection, runtime safeguards, API updates, and enhanced testing.
🚨 CVE-2026-79685
Dell PowerStore contains an Argument Injection vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to gain unauthorized access to sensitive sensitive system information.
🎖@cveNotify
Dell PowerStore contains an Argument Injection vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to gain unauthorized access to sensitive sensitive system information.
🎖@cveNotify
🚨 CVE-2026-83607
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.14 and 0.9.11, and in xmldom version 0.6.0 and earlier, Document.createElement(tagName) stores an unvalidated element name and XMLSerializer.serializeToString() emits that name verbatim. The requireWellFormed: true path did not validate the element qualified name or synthesized xmlns:PREFIX declaration, so attacker-controlled tag names could inject attributes, elements, or processing instructions into serialized XML or HTML and could cause cross-site scripting when browser-consumed. The unchecked values violate the XML QName constraint, and default serialization and creation-time createElement() behavior remain permissive. This issue is fixed in @xmldom/xmldom versions 0.8.14 and 0.9.11; no fixed version is available for xmldom.
🎖@cveNotify
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.14 and 0.9.11, and in xmldom version 0.6.0 and earlier, Document.createElement(tagName) stores an unvalidated element name and XMLSerializer.serializeToString() emits that name verbatim. The requireWellFormed: true path did not validate the element qualified name or synthesized xmlns:PREFIX declaration, so attacker-controlled tag names could inject attributes, elements, or processing instructions into serialized XML or HTML and could cause cross-site scripting when browser-consumed. The unchecked values violate the XML QName constraint, and default serialization and creation-time createElement() behavior remain permissive. This issue is fixed in @xmldom/xmldom versions 0.8.14 and 0.9.11; no fixed version is available for xmldom.
🎖@cveNotify
GitHub
fix: reject invalid element and attribute names when requireWellForme… · xmldom/xmldom@cba1321
…d (#1043)
The requireWellFormed serializer validates Comment,
ProcessingInstruction, CDATASection, Text and DocumentType content
against their XML productions, but never the element or attribute ...
The requireWellFormed serializer validates Comment,
ProcessingInstruction, CDATASection, Text and DocumentType content
against their XML productions, but never the element or attribute ...
🚨 CVE-2026-83612
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.0-beta.1 until 0.9.12, HTML-mode parsing through DOMParser.parseFromString() mishandles a mixed-case closing tag for the script, style, textarea, or title raw-text elements. parseHtmlSpecialContent, selected by isHTMLRawTextElement or isHTMLEscapableRawTextElement, uses a case-sensitive indexOf() and then calls substring() with a missing-close result of negative one, causing unstable parser progression and quadratic output amplification. A small untrusted text/html document can consequently consume disproportionate CPU and memory when parsed and serialized. This issue is fixed in @xmldom/xmldom version 0.9.12.
🎖@cveNotify
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.0-beta.1 until 0.9.12, HTML-mode parsing through DOMParser.parseFromString() mishandles a mixed-case closing tag for the script, style, textarea, or title raw-text elements. parseHtmlSpecialContent, selected by isHTMLRawTextElement or isHTMLEscapableRawTextElement, uses a case-sensitive indexOf() and then calls substring() with a missing-close result of negative one, causing unstable parser progression and quadratic output amplification. A small untrusted text/html document can consequently consume disproportionate CPU and memory when parsed and serialized. This issue is fixed in @xmldom/xmldom version 0.9.12.
🎖@cveNotify
GitHub
fix: prevent HTML raw-text output amplification via case-insensitive … · xmldom/xmldom@7ced40c
…close-tag match (GHSA-6mj3-qw4j-hgrw)
`parseHtmlSpecialContent` located a raw-text element's closing tag with a
case-sensitive `indexOf`, so a mixed-case close tag (e.g. `</ScRiPt&...
`parseHtmlSpecialContent` located a raw-text element's closing tag with a
case-sensitive `indexOf`, so a mixed-case close tag (e.g. `</ScRiPt&...
🚨 CVE-2026-83616
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, Document.createProcessingInstruction(target, data) in lib/dom.js accepts an unvalidated target, while the requireWellFormed: true serializer checks only for a colon and the reserved case-insensitive xml name on 0.9.x and performs no target check on 0.8.x. Because serialization emits <?target data?>, a target containing >, ?, whitespace, or another invalid XML-name character can break the processing-instruction boundary and inject XML structure. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.
🎖@cveNotify
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, Document.createProcessingInstruction(target, data) in lib/dom.js accepts an unvalidated target, while the requireWellFormed: true serializer checks only for a colon and the reserved case-insensitive xml name on 0.9.x and performs no target check on 0.8.x. Because serialization emits <?target data?>, a target containing >, ?, whitespace, or another invalid XML-name character can break the processing-instruction boundary and inject XML structure. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.
🎖@cveNotify
GitHub
fix: prevent XML injection via unsafe processing instruction target s… · xmldom/xmldom@1cde3e3
…erialization (GHSA-c7q8-3ch8-vqpv)
Under `requireWellFormed`, `serializeToString` now validates a
`ProcessingInstruction` target against the anchored XML `NCName` production (new
`NCName_exact` e...
Under `requireWellFormed`, `serializeToString` now validates a
`ProcessingInstruction` target against the anchored XML `NCName` production (new
`NCName_exact` e...
🚨 CVE-2026-83617
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.11 until 0.9.12, the requireWellFormed: true element and attribute name checks use the anchored QName_exact expression produced by reg() in lib/grammar.js, which inherits the multiline flag. A name with a valid first line followed by U+000A, U+000D, U+2028, or U+2029 and breakout markup therefore passes validation and is emitted verbatim in element start and end tags or attribute names. This bypasses the strict-serialization checks introduced for the earlier element-name and attribute-name injection advisories, while the default serialization path remains outside the strict guarantee. This issue is fixed in @xmldom/xmldom version 0.9.12.
🎖@cveNotify
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.11 until 0.9.12, the requireWellFormed: true element and attribute name checks use the anchored QName_exact expression produced by reg() in lib/grammar.js, which inherits the multiline flag. A name with a valid first line followed by U+000A, U+000D, U+2028, or U+2029 and breakout markup therefore passes validation and is emitted verbatim in element start and end tags or attribute names. This bypasses the strict-serialization checks introduced for the earlier element-name and attribute-name injection advisories, while the default serialization path remains outside the strict guarantee. This issue is fixed in @xmldom/xmldom version 0.9.12.
🎖@cveNotify
GitHub
fix: prevent multiline-anchor bypass of name/id validation by droppin… · xmldom/xmldom@7b2ec67
…g the reg() m flag (GHSA-jxjr-3g7g-3944, GHSA-vr34-hp96-76pp, GHSA-3px3-54cx-rmw9, GHSA-6h8r-xr42-gp59)
The shared `reg()` builder in `lib/grammar.js` compiled every anchored production with the ...
The shared `reg()` builder in `lib/grammar.js` compiled every anchored production with the ...
🚨 CVE-2026-84111
A flaw has been found in Chanjet CRM up to 20260707. This issue affects some unknown processing of the file jxf_dump_table.php. This manipulation of the argument gblOrgID causes sql injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A flaw has been found in Chanjet CRM up to 20260707. This issue affects some unknown processing of the file jxf_dump_table.php. This manipulation of the argument gblOrgID causes sql injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
GitHub
Chanjet CRM SQL Injection Vulnerability Report · Issue #1 · LittleRedBean/CVE
Chanjet CRM SQL Injection Vulnerability Report AFFECTED PRODUCT Product: Chanjet CRM Affected Component: /tools/jxf_dump_table.php VENDOR INFORMATION Vendor: Chanjet Vendor Website: https://www.cha...
🚨 CVE-2026-84115
A vulnerability was found in Cleo Harmony up to 5.8.1.10. The affected element is an unknown function of the file /api/connections of the component JWT Refresh Token Handler. Performing a manipulation of the argument Bearer results in improper privilege management. The attack is possible to be carried out remotely. The exploit has been made public and could be used. Upgrading to version 5.8.1.11 is sufficient to fix this issue. It is recommended to upgrade the affected component.
🎖@cveNotify
A vulnerability was found in Cleo Harmony up to 5.8.1.10. The affected element is an unknown function of the file /api/connections of the component JWT Refresh Token Handler. Performing a manipulation of the argument Bearer results in improper privilege management. The attack is possible to be carried out remotely. The exploit has been made public and could be used. Upgrading to version 5.8.1.11 is sufficient to fix this issue. It is recommended to upgrade the affected component.
🎖@cveNotify
Cleo
Cleo Harmony® 5.8.1 Release Notes
Important:Cleo product patches often contain security-strengthening capability enhancements and updates. We strongly recommend that customers remain on the latest product version and apply updates ...
🚨 CVE-2026-10195
The FS-Poster plugin for WordPress is vulnerable to Remote Code Execution in versions up to and including 8.0.1. This is due to insufficient input sanitization of the FFmpeg path parameter before passing it to the exec() function, combined with missing authorization checks on the REST API endpoints. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute arbitrary commands on the underlying server.
🎖@cveNotify
The FS-Poster plugin for WordPress is vulnerable to Remote Code Execution in versions up to and including 8.0.1. This is due to insufficient input sanitization of the FFmpeg path parameter before passing it to the exec() function, combined with missing authorization checks on the REST API endpoints. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute arbitrary commands on the underlying server.
🎖@cveNotify
FS Poster
FS Poster > Documentation > Updates / Changelogs
FS Poster - Changelogs. Top-rated WordPress auto poster and scheduling plugin team releases updates frequently to provide better service and adds new features.
🚨 CVE-2026-18931
Use of Hard-coded Credentials vulnerability in TMT Machine Industry and Trade Ltd. Co. Talassoft Industrial Management Software allows Retrieve Embedded Sensitive Data.
This issue affects Talassoft Industrial Management Software: from V.4 before V.16.
🎖@cveNotify
Use of Hard-coded Credentials vulnerability in TMT Machine Industry and Trade Ltd. Co. Talassoft Industrial Management Software allows Retrieve Embedded Sensitive Data.
This issue affects Talassoft Industrial Management Software: from V.4 before V.16.
🎖@cveNotify
siberguvenlik.gov.tr
T.C. Siber Güvenlik Başkanlığı
Türkiye Cumhuriyeti Cumhurbaşkanlığı Siber Güvenlik Başkanlığı resmi web sitesi.
🚨 CVE-2026-51767
Incorrect access control in the recvClearPairCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to reset pairing state and reboot the device via sending a crafted MQTT message to the cs_broker component.
🎖@cveNotify
Incorrect access control in the recvClearPairCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to reset pairing state and reboot the device via sending a crafted MQTT message to the cs_broker component.
🎖@cveNotify
GitHub
CVE-Vendor-Coordination/TOTOLINK/README.md at main · ShengWu00/CVE-Vendor-Coordination
Contribute to ShengWu00/CVE-Vendor-Coordination development by creating an account on GitHub.