🚨 CVE-2026-75538
An attacker that connects to an open Erlang TCP port that uses the inet driver with {packet,4} mode can use a signed overflow in an incorrect packet length calculation to overflow the receive buffer into the VM allocator area and beyond up to about 2 GB.

This would easily trash the allocated block's allocator metadata footer, and the next block, if any, and most likely cause the BEAM VM to crash. Utilizing this with precision enough to achieve Remote Code Execution would be extremely unfeasible.

This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to erts from 6.0 before 15.2.7.13, from 16.0 before 16.4.0.6, and from 17.0 before 17.0.6. Whether OTP before OTP 17.0, corresponding to erts before 6.0, is affected is unknown.

🎖@cveNotify

🚨 CVE-2026-78012
An issue in the NetStaX EtherNet/IP Stack prior to v5.6.1 could allow a large Class 3 explicit-message request to exceed the application-side receive buffer without generating an error or warning. The result could be memory corruption, a device crash, or a potential remote attack vector without the originating device receiving a CIP error indicating that the request could not be processed.

🎖@cveNotify

🚨 CVE-2026-79685
Dell PowerStore contains an Argument Injection vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to gain unauthorized access to sensitive sensitive system information.

🎖@cveNotify

🚨 CVE-2026-79686
Dell PowerStore contains a Protection Mechanism Failure vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to bypass access restrictions and gain escalated privileges.

🎖@cveNotify

🚨 CVE-2026-83557
DefaultBaseTypeLimitingValidator is the PolymorphicTypeValidator applied automatically whenever @JsonTypeInfo is used without an explicitly configured custom validator. It denies polymorphic resolution only for a fixed set of "unsafe base types", and its isSafeSubType method returns true unconditionally for every base type outside that set. java.lang.Comparable was absent from the list despite being implemented by a very large fraction of JDK and application classes, comparable in breadth to java.io.Serializable, which is on the list for that reason. An application declaring an @JsonTypeInfo-annotated property or class with Comparable as its base type, and no custom PolymorphicTypeValidator, will accept a type identifier for essentially any class implementing Comparable. This yields an attacker-controlled object instantiation primitive; a demonstrated case constructs a java.io.File for an arbitrary attacker-chosen path, which becomes path-traversal-adjacent if the application subsequently calls path-sensitive methods on the value. No class implementing Comparable has been identified that yields code execution through deserialization alone. Global Default Typing via activateDefaultTyping is not affected, because that method structurally requires an explicit PolymorphicTypeValidator argument. This affects com.fasterxml.jackson.core:jackson-databind from 2.11.0 before 2.18.10, from 2.19.0 before 2.21.6, and from 2.22.0 before 2.22.2, and tools.jackson.core:jackson-databind from 3.0.0 before 3.1.6 and from 3.2.0 before 3.2.2. Users should upgrade to 2.18.10, 2.21.6, 2.22.2, 3.1.6, or 3.2.2.

🎖@cveNotify

🚨 CVE-2026-83605
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.14 and 0.9.11, and in xmldom version 0.6.0 and earlier, Element.setAttribute() calls the private _createAttribute(name) path without validating the attribute name, while Document.createAttribute(name) validates against QName. XMLSerializer.serializeToString() emits attribute names verbatim, and requireWellFormed: true did not validate them, so a crafted name can terminate the intended attribute and inject additional attributes, including event handlers, into browser-consumed output; synthesized xmlns:PREFIX declarations expose the same unchecked-name boundary. This issue is fixed in @xmldom/xmldom versions 0.8.14 and 0.9.11; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83606
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.0-beta.9 until 0.9.11, the processing-instruction production in lib/grammar.js lets the greedy S+ separator and lazy Char*? data group repeatedly repartition a long whitespace tail when the required closing ?> is absent. Both parsePI and parseProcessingInstruction apply the expression to the entire remaining source, causing quadratic backtracking during DOMParser.parseFromString() under default options and allowing a small unauthenticated XML input to stall the Node.js event loop. This issue is fixed in @xmldom/xmldom version 0.9.11.

🎖@cveNotify

🚨 CVE-2026-83607
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.14 and 0.9.11, and in xmldom version 0.6.0 and earlier, Document.createElement(tagName) stores an unvalidated element name and XMLSerializer.serializeToString() emits that name verbatim. The requireWellFormed: true path did not validate the element qualified name or synthesized xmlns:PREFIX declaration, so attacker-controlled tag names could inject attributes, elements, or processing instructions into serialized XML or HTML and could cause cross-site scripting when browser-consumed. The unchecked values violate the XML QName constraint, and default serialization and creation-time createElement() behavior remain permissive. This issue is fixed in @xmldom/xmldom versions 0.8.14 and 0.9.11; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83608
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, the DOCUMENT_TYPE_NODE branch in lib/dom.js validates publicId, systemId, and internalSubset under requireWellFormed: true but emits DocumentType.name verbatim. A name containing > or whitespace can terminate the <!DOCTYPE ...> declaration and inject sibling markup; the value can be supplied through createDocumentType() on the 0.8.x and unscoped lines or through a direct DocumentType.name property write on every affected line. The default path and legacy creation-time behavior remain permissive, while the vulnerable strict path fails to enforce an XML Name. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83609
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.0 until 0.9.12, the shared reg() builder in lib/grammar.js compiles the anchored QName_exact validator with the multiline flag, so ^ and $ validate only one line instead of the complete name. createElementNS, createAttributeNS, createDocumentType, and createAttribute consequently accept a malformed XML name whose first line is valid and whose later text injects markup when serialized through either the default path or requireWellFormed: true. The triggering ECMAScript line terminators are U+000A, U+000D, U+2028, and U+2029. This issue is fixed in @xmldom/xmldom version 0.9.12.

🎖@cveNotify

🚨 CVE-2026-83610
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, Document.createEntityReference(name) accepts an invalid name and the ENTITY_REFERENCE_NODE serializer emits the resulting nodeName directly in &name; form. Directly serializing the node or fragment with XMLSerializer.serializeToString() and requireWellFormed: true can therefore break the entity-reference boundary and produce attacker-controlled XML markup when reparsed. The parser does not ordinarily create these nodes, and element-child insertion is rejected, so exploitation requires an application to create and directly serialize an EntityReference. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83611
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, DOMParser.parseFromString() can silently accept an end tag such as </a\njunk>, close the element, and discard the trailing content. On 0.9.x, the lib/sax.js end-tag validator inherits the multiline flag from reg(), allowing the first line to satisfy the anchored XML ETag production; older lines have no equivalent residue validation. This parser differential can bypass a parse-before-trust well-formedness gate, although it does not inject the discarded content; onError on 0.9.x and errorHandler on 0.8.x are the relevant reporting interfaces. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83612
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.0-beta.1 until 0.9.12, HTML-mode parsing through DOMParser.parseFromString() mishandles a mixed-case closing tag for the script, style, textarea, or title raw-text elements. parseHtmlSpecialContent, selected by isHTMLRawTextElement or isHTMLEscapableRawTextElement, uses a case-sensitive indexOf() and then calls substring() with a missing-close result of negative one, causing unstable parser progression and quadratic output amplification. A small untrusted text/html document can consequently consume disproportionate CPU and memory when parsed and serialized. This issue is fixed in @xmldom/xmldom version 0.9.12.

🎖@cveNotify

🚨 CVE-2026-83613
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, DOMHandler.startElement in lib/dom-parser.js inserts every parsed attribute through setAttributeNode, while NamedNodeMap.setNamedItem in lib/dom.js calls the linear getNamedItem or getNamedItemNS lookup for each insertion. A well-formed element with many distinct attributes therefore requires quadratic comparisons during DOMParser.parseFromString() and can stall a Node.js event loop before application validation. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83614
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom versions 0.3.0 through 0.6.0, two independent quadratic paths can cause denial of service. In lib/sax.js, parseElementStartPart repeatedly rescans a malformed tag name to the next > during single-character recovery; in lib/dom.js, normalize() repeatedly removes and appends adjacent text nodes, causing quadratic reindexing and string rebuilding. The first path is reachable through default DOMParser.parseFromString() processing, while the second is also reachable through a direct normalize() call on a programmatically constructed DOM, and endDocument invokes that normalization after parsing. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83615
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom versions 0.1.5 through 0.6.0, appendElement in lib/sax.js uses _copy to clone the complete currentNSMap for each nested element that declares a new namespace prefix. Keeping every ancestor map live on the parse stack creates quadratic peak namespace-map storage, so a small highly compressible XML document can exhaust the process heap before application validation. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83616
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, Document.createProcessingInstruction(target, data) in lib/dom.js accepts an unvalidated target, while the requireWellFormed: true serializer checks only for a colon and the reserved case-insensitive xml name on 0.9.x and performs no target check on 0.8.x. Because serialization emits <?target data?>, a target containing >, ?, whitespace, or another invalid XML-name character can break the processing-instruction boundary and inject XML structure. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83618
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.10 until 0.9.12, the requireWellFormed: true serializer validates DocumentType.publicId and DocumentType.systemId with PubidLiteral_match and SystemLiteral_match expressions produced by reg() in lib/grammar.js, which inherit the multiline flag. A complete valid literal on the first line can therefore satisfy the matcher while U+000A, U+000D, U+2028, or U+2029 and breakout markup remain in the emitted <!DOCTYPE ...> declaration. This bypasses the strict-serialization mitigation for the earlier DocumentType injection advisory; creation and direct property assignment remain unvalidated by design. This issue is fixed in @xmldom/xmldom version 0.9.12.

🎖@cveNotify

🚨 CVE-2026-83619
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.7.0 until 0.8.15, the release-0.8.x parser in lib/sax.js trims captured end-tag names with the unanchored global expression /[ \t\n\r]+$/g. For an end tag containing a long whitespace run followed by a non-whitespace character, the expression retries from each possible starting position and backtracks quadratically before failing its end anchor. DOMParser.parseFromString() reaches the path under default options, allowing a small unauthenticated XML input to stall the Node.js event loop; the 0.9.x and unscoped npm lines do not contain this expression. This issue is fixed in @xmldom/xmldom version 0.8.15.

🎖@cveNotify

🚨 CVE-2026-84110
A vulnerability was detected in Releasit Releasit COD Form & Upsells v1. This vulnerability affects unknown code of the component OTP Validation. The manipulation results in client-side enforcement of server-side security. The attack may be launched remotely. The exploit is now public and may be used. Upgrading to version v2 is able to resolve this issue. The affected component should be upgraded.

🎖@cveNotify

🚨 CVE-2026-84111
A flaw has been found in Chanjet CRM up to 20260707. This issue affects some unknown processing of the file jxf_dump_table.php. This manipulation of the argument gblOrgID causes sql injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify