🚨 CVE-2026-70405
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP snmp allows a remote attacker to degrade availability by sending an SNMP message containing a BER INTEGER whose length field is arbitrarily large.

snmp_pdus:dec_integer_notag/1 defaults its size limit to infinity, and do_dec_integer_notag/2 then accumulates the value across every declared byte with a recursive shift and bitwise or. Work grows superlinearly in the declared length because each operation acts on a progressively larger bignum. The size-limited variant dec_integer_notag/2 exists but is reached from only one call site, dec_snmp_version/1, which bounds the version field to ten bytes; the request identifier, error status and index, generic and specific trap fields, engine boots and time, and every varbind value decoded by dec_value/1 all use the unbounded form. The decode runs before the PDU is processed, so no valid request is required beyond what the deployment demands to accept the message at all.

This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to snmp from 4.25.1 before 5.18.2.1, from 5.19 before 5.20.2.2, and from 5.20.3 before 5.20.5. Whether OTP before OTP 17.0, corresponding to snmp before 4.25.1, is affected is unknown.

🎖@cveNotify

🚨 CVE-2026-70409
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP eldap allows a malicious or compromised LDAP server to degrade availability by returning a referral URL whose port component is a very long run of digits.

eldap:parse_port/2 passes the port substring straight to list_to_integer/1 with no length bound. The surrounding try ... catch only rejects a value that fails to parse, so a syntactically valid port of up to roughly 1.26 million digits converts successfully and costs the caller hundreds of milliseconds of arbitrary-precision arithmetic per referral. The conversion function itself is documented to accept integers of any size, so bounding the input is the caller's responsibility. Reaching the flaw requires the application to pass a server-supplied referral to eldap:parse_ldap_url/1, which eldap never calls itself: referral strings are returned to the caller unparsed.

This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to eldap from 1.0.3 before 1.2.14.2, from 1.2.15 before 1.2.16.1, and from 1.3 before 1.3.1.

🎖@cveNotify

🚨 CVE-2026-71380
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete.

httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost.

This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.

🎖@cveNotify

🚨 CVE-2026-71562
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP inets httpc allows a malicious or compromised HTTP server to degrade availability by returning a numeric header whose value is a very long run of digits.

httpc_handler.erl converts the server-supplied Content-Length with list_to_integer/1 before comparing it against max_body_size, so the size check cannot protect the conversion, and the option defaults to nolimit in any case. The same unbounded conversion appears in httpc_response:format_response/1 for Content-Length and in httpc_response:get_ms_from_retry_after/1 for Retry-After, which is guarded only by a check that the first character is a digit. A value of up to roughly 1.26 million digits converts successfully and costs the requesting process hundreds of milliseconds of arbitrary-precision arithmetic per response. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.

This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.

🎖@cveNotify

🚨 CVE-2026-73270
Improper Handling of Case Sensitivity vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by requesting them with different casing, on deployments whose filesystem is case-insensitive.

mod_auth:secret_path/3 decides whether a resolved filesystem path lies inside a protected directory block by running the configured directory path through re:run/3 without the caseless option. A request for /secret/file against a directory configured as /Secret therefore does not match, so the request is treated as unprotected and no authentication challenge is issued, while the filesystem resolves the differently cased path to the same file and mod_get serves it. Deployments on case-sensitive filesystems are unaffected, because there the filesystem itself rejects the mismatched casing.

This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.

🎖@cveNotify

🚨 CVE-2026-73812
httpd function check_header/3 rejects duplicate Content-Length (per CVE-2026-23941) but never checks for the TE+CL co-presence that RFC 9112 §6.3 identifies as a probable smuggling attempt. handle_body/3 frames by chunked and silently discards Content-Length. A CL-preferring front-end paired with chunked-preferring inets creates a classic CL.TE front-end/back-end desync.

This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.

🎖@cveNotify

🚨 CVE-2026-74835
The inets application HTTP server httpd fails to enforce a configured body-size limit on chunked request.

This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.

🎖@cveNotify

🚨 CVE-2026-74994
The mod_auth module in OTP's inets httpd server, when configured with dets or mnesia authentication backends and multiple directory configuration blocks, collapses all directory blocks into a single shared user/group namespace. A user added to one protected directory is accepted as valid for all other protected directories on the same server instance.

This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.

🎖@cveNotify

🚨 CVE-2026-75538
An attacker that connects to an open Erlang TCP port that uses the inet driver with {packet,4} mode can use a signed overflow in an incorrect packet length calculation to overflow the receive buffer into the VM allocator area and beyond up to about 2 GB.

This would easily trash the allocated block's allocator metadata footer, and the next block, if any, and most likely cause the BEAM VM to crash. Utilizing this with precision enough to achieve Remote Code Execution would be extremely unfeasible.

This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to erts from 6.0 before 15.2.7.13, from 16.0 before 16.4.0.6, and from 17.0 before 17.0.6. Whether OTP before OTP 17.0, corresponding to erts before 6.0, is affected is unknown.

🎖@cveNotify

🚨 CVE-2026-78012
An issue in the NetStaX EtherNet/IP Stack prior to v5.6.1 could allow a large Class 3 explicit-message request to exceed the application-side receive buffer without generating an error or warning. The result could be memory corruption, a device crash, or a potential remote attack vector without the originating device receiving a CIP error indicating that the request could not be processed.

🎖@cveNotify

🚨 CVE-2026-79685
Dell PowerStore contains an Argument Injection vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to gain unauthorized access to sensitive sensitive system information.

🎖@cveNotify

🚨 CVE-2026-79686
Dell PowerStore contains a Protection Mechanism Failure vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to bypass access restrictions and gain escalated privileges.

🎖@cveNotify

🚨 CVE-2026-83557
DefaultBaseTypeLimitingValidator is the PolymorphicTypeValidator applied automatically whenever @JsonTypeInfo is used without an explicitly configured custom validator. It denies polymorphic resolution only for a fixed set of "unsafe base types", and its isSafeSubType method returns true unconditionally for every base type outside that set. java.lang.Comparable was absent from the list despite being implemented by a very large fraction of JDK and application classes, comparable in breadth to java.io.Serializable, which is on the list for that reason. An application declaring an @JsonTypeInfo-annotated property or class with Comparable as its base type, and no custom PolymorphicTypeValidator, will accept a type identifier for essentially any class implementing Comparable. This yields an attacker-controlled object instantiation primitive; a demonstrated case constructs a java.io.File for an arbitrary attacker-chosen path, which becomes path-traversal-adjacent if the application subsequently calls path-sensitive methods on the value. No class implementing Comparable has been identified that yields code execution through deserialization alone. Global Default Typing via activateDefaultTyping is not affected, because that method structurally requires an explicit PolymorphicTypeValidator argument. This affects com.fasterxml.jackson.core:jackson-databind from 2.11.0 before 2.18.10, from 2.19.0 before 2.21.6, and from 2.22.0 before 2.22.2, and tools.jackson.core:jackson-databind from 3.0.0 before 3.1.6 and from 3.2.0 before 3.2.2. Users should upgrade to 2.18.10, 2.21.6, 2.22.2, 3.1.6, or 3.2.2.

🎖@cveNotify

🚨 CVE-2026-83605
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.14 and 0.9.11, and in xmldom version 0.6.0 and earlier, Element.setAttribute() calls the private _createAttribute(name) path without validating the attribute name, while Document.createAttribute(name) validates against QName. XMLSerializer.serializeToString() emits attribute names verbatim, and requireWellFormed: true did not validate them, so a crafted name can terminate the intended attribute and inject additional attributes, including event handlers, into browser-consumed output; synthesized xmlns:PREFIX declarations expose the same unchecked-name boundary. This issue is fixed in @xmldom/xmldom versions 0.8.14 and 0.9.11; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83606
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.0-beta.9 until 0.9.11, the processing-instruction production in lib/grammar.js lets the greedy S+ separator and lazy Char*? data group repeatedly repartition a long whitespace tail when the required closing ?> is absent. Both parsePI and parseProcessingInstruction apply the expression to the entire remaining source, causing quadratic backtracking during DOMParser.parseFromString() under default options and allowing a small unauthenticated XML input to stall the Node.js event loop. This issue is fixed in @xmldom/xmldom version 0.9.11.

🎖@cveNotify

🚨 CVE-2026-83607
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.14 and 0.9.11, and in xmldom version 0.6.0 and earlier, Document.createElement(tagName) stores an unvalidated element name and XMLSerializer.serializeToString() emits that name verbatim. The requireWellFormed: true path did not validate the element qualified name or synthesized xmlns:PREFIX declaration, so attacker-controlled tag names could inject attributes, elements, or processing instructions into serialized XML or HTML and could cause cross-site scripting when browser-consumed. The unchecked values violate the XML QName constraint, and default serialization and creation-time createElement() behavior remain permissive. This issue is fixed in @xmldom/xmldom versions 0.8.14 and 0.9.11; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83608
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, the DOCUMENT_TYPE_NODE branch in lib/dom.js validates publicId, systemId, and internalSubset under requireWellFormed: true but emits DocumentType.name verbatim. A name containing > or whitespace can terminate the <!DOCTYPE ...> declaration and inject sibling markup; the value can be supplied through createDocumentType() on the 0.8.x and unscoped lines or through a direct DocumentType.name property write on every affected line. The default path and legacy creation-time behavior remain permissive, while the vulnerable strict path fails to enforce an XML Name. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83609
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.0 until 0.9.12, the shared reg() builder in lib/grammar.js compiles the anchored QName_exact validator with the multiline flag, so ^ and $ validate only one line instead of the complete name. createElementNS, createAttributeNS, createDocumentType, and createAttribute consequently accept a malformed XML name whose first line is valid and whose later text injects markup when serialized through either the default path or requireWellFormed: true. The triggering ECMAScript line terminators are U+000A, U+000D, U+2028, and U+2029. This issue is fixed in @xmldom/xmldom version 0.9.12.

🎖@cveNotify

🚨 CVE-2026-83610
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, Document.createEntityReference(name) accepts an invalid name and the ENTITY_REFERENCE_NODE serializer emits the resulting nodeName directly in &name; form. Directly serializing the node or fragment with XMLSerializer.serializeToString() and requireWellFormed: true can therefore break the entity-reference boundary and produce attacker-controlled XML markup when reparsed. The parser does not ordinarily create these nodes, and element-child insertion is rejected, so exploitation requires an application to create and directly serialize an EntityReference. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83611
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, DOMParser.parseFromString() can silently accept an end tag such as </a\njunk>, close the element, and discard the trailing content. On 0.9.x, the lib/sax.js end-tag validator inherits the multiline flag from reg(), allowing the first line to satisfy the anchored XML ETag production; older lines have no equivalent residue validation. This parser differential can bypass a parse-before-trust well-formedness gate, although it does not inject the discarded content; onError on 0.9.x and errorHandler on 0.8.x are the relevant reporting interfaces. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

🎖@cveNotify

🚨 CVE-2026-83612
xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.0-beta.1 until 0.9.12, HTML-mode parsing through DOMParser.parseFromString() mishandles a mixed-case closing tag for the script, style, textarea, or title raw-text elements. parseHtmlSpecialContent, selected by isHTMLRawTextElement or isHTMLEscapableRawTextElement, uses a case-sensitive indexOf() and then calls substring() with a missing-close result of negative one, causing unstable parser progression and quadratic output amplification. A small untrusted text/html document can consequently consume disproportionate CPU and memory when parsed and serialized. This issue is fixed in @xmldom/xmldom version 0.9.12.

🎖@cveNotify