🚨 CVE-2026-51766
Incorrect access control in the setDevReboot function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to reboot the local device and, on a master, fan out reboot commands to mesh slaves via sending a crafted MQTT message to the cs_broker component.
🎖@cveNotify
Incorrect access control in the setDevReboot function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to reboot the local device and, on a master, fan out reboot commands to mesh slaves via sending a crafted MQTT message to the cs_broker component.
🎖@cveNotify
GitHub
CVE-Vendor-Coordination/TOTOLINK/README.md at main · ShengWu00/CVE-Vendor-Coordination
Contribute to ShengWu00/CVE-Vendor-Coordination development by creating an account on GitHub.
🚨 CVE-2026-58571
Dell PowerStore contains an OS Command Injection vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to execute arbitrary commands with root privileges.
🎖@cveNotify
Dell PowerStore contains an OS Command Injection vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to execute arbitrary commands with root privileges.
🎖@cveNotify
🚨 CVE-2026-80047
A vulnerability in Hugging Face Transformers (versions 4.49.0, <= 5.8.1) allows remote Python files to be written to local disk without user consent when using GenerativePreTrainedModel.load_custom_generate(). The function fetches and caches a remote module file before performing the required trust_remote_code consent check, inverting the security model enforced by other code-loading paths (such as AutoConfig, AutoModel, and AutoTokenizer). As a result, attacker‑controlled Python code from custom_generate/generate.py is copied into the user’s ~/.cache/huggingface/modules directory even if the user declines the trust prompt. Although execution is correctly gated, the file write is not reversible and can persist across sessions. This can lead to persistent, unauthorized files on disk and stale cache collisions where cached attacker code may later be executed during trusted model loads. The issue stems from an unconditional file write in dynamic_module_utils.py prior to any trust verification.
🎖@cveNotify
A vulnerability in Hugging Face Transformers (versions 4.49.0, <= 5.8.1) allows remote Python files to be written to local disk without user consent when using GenerativePreTrainedModel.load_custom_generate(). The function fetches and caches a remote module file before performing the required trust_remote_code consent check, inverting the security model enforced by other code-loading paths (such as AutoConfig, AutoModel, and AutoTokenizer). As a result, attacker‑controlled Python code from custom_generate/generate.py is copied into the user’s ~/.cache/huggingface/modules directory even if the user declines the trust prompt. Although execution is correctly gated, the file write is not reversible and can persist across sessions. This can lead to persistent, unauthorized files on disk and stale cache collisions where cached attacker code may later be executed during trusted model loads. The issue stems from an unconditional file write in dynamic_module_utils.py prior to any trust verification.
🎖@cveNotify
GitHub
GitHub - huggingface/transformers: 🤗 Transformers: the model-definition framework for state-of-the-art machine learning models…
🤗 Transformers: the model-definition framework for state-of-the-art machine learning models in text, vision, audio, and multimodal models, for both inference and training. - huggingface/transformers
🚨 CVE-2026-84109
A weakness has been identified in Xinhu Rainrock RockOA up to 2.7.6. Affected by this issue is the function getOrder of the file webmain/webmainAction.php. Executing a manipulation of the argument highorder can lead to sql injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A weakness has been identified in Xinhu Rainrock RockOA up to 2.7.6. Affected by this issue is the function getOrder of the file webmain/webmainAction.php. Executing a manipulation of the argument highorder can lead to sql injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
GitHub
rainrocka Xinhu OA v2.7.6 SQL Injection in webmainAction.php via highorder parameter · Issue #1 · Bu7terf1y/cve
Vulnerability Description A SQL injection vulnerability exists in the Xinhu OA system (v2.7.6). The vulnerability is located in the getOrder method of webmain/webmainAction.php, where the highorder...
🚨 CVE-2026-84218
A flaw was found in Jolokia's JSR-160 proxy functionality where insufficient validation of client-controlled JMX service URLs allows a bypass of the denylist introduced to mitigate CVE-2018-1000130. The proxy accepts a `target.url` value from a Jolokia POST request and passes it to `JMXServiceURL` and `JMXConnectorFactory` for establishing the remote JMX connection. The existing denylist only rejects URLs matching `service:jmx:rmi:///jndi/ldap:.*`, which can be bypassed using alternative valid JMX service URL forms, including `ldaps://` schemes or LDAP URLs with a non-empty JMX host component. These URLs are accepted as valid `JMXServiceURL` objects and can cause the Jolokia agent JVM to perform a JNDI lookup against an attacker-controlled LDAP endpoint. This can result in server-side request forgery (SSRF), forwarding of supplied JMX credentials to the remote endpoint, and potentially remote code execution depending on the classes and configuration available in the target JVM.
🎖@cveNotify
A flaw was found in Jolokia's JSR-160 proxy functionality where insufficient validation of client-controlled JMX service URLs allows a bypass of the denylist introduced to mitigate CVE-2018-1000130. The proxy accepts a `target.url` value from a Jolokia POST request and passes it to `JMXServiceURL` and `JMXConnectorFactory` for establishing the remote JMX connection. The existing denylist only rejects URLs matching `service:jmx:rmi:///jndi/ldap:.*`, which can be bypassed using alternative valid JMX service URL forms, including `ldaps://` schemes or LDAP URLs with a non-empty JMX host component. These URLs are accepted as valid `JMXServiceURL` objects and can cause the Jolokia agent JVM to perform a JNDI lookup against an attacker-controlled LDAP endpoint. This can result in server-side request forgery (SSRF), forwarding of supplied JMX credentials to the remote endpoint, and potentially remote code execution depending on the classes and configuration available in the target JVM.
🎖@cveNotify
Redhat
CVE-2026-84218 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-18630
Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in TMT Machine Industry and Trade Ltd. Co. Talassoft Industrial Management Software allows SQL Injection.
This issue affects Talassoft Industrial Management Software: from V.4 before V.16.
🎖@cveNotify
Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in TMT Machine Industry and Trade Ltd. Co. Talassoft Industrial Management Software allows SQL Injection.
This issue affects Talassoft Industrial Management Software: from V.4 before V.16.
🎖@cveNotify
siberguvenlik.gov.tr
T.C. Siber Güvenlik Başkanlığı
Türkiye Cumhuriyeti Cumhurbaşkanlığı Siber Güvenlik Başkanlığı resmi web sitesi.
🚨 CVE-2026-18771
Missing authentication for critical function vulnerability in TMT Machine Industry and Trade Ltd. Co. Talassoft Industrial Management Software allows Authentication Bypass.
This issue affects Talassoft Industrial Management Software: from V4 before V.16.
🎖@cveNotify
Missing authentication for critical function vulnerability in TMT Machine Industry and Trade Ltd. Co. Talassoft Industrial Management Software allows Authentication Bypass.
This issue affects Talassoft Industrial Management Software: from V4 before V.16.
🎖@cveNotify
siberguvenlik.gov.tr
T.C. Siber Güvenlik Başkanlığı
Türkiye Cumhuriyeti Cumhurbaşkanlığı Siber Güvenlik Başkanlığı resmi web sitesi.
🚨 CVE-2026-18780
Cross-Site request forgery (CSRF) vulnerability in TMT Machine Industry and Trade Ltd. Co. Talassoft Industrial Management Software allows Cross Site Request Forgery.
This issue affects Talassoft Industrial Management Software: from V.4 before V.16.
🎖@cveNotify
Cross-Site request forgery (CSRF) vulnerability in TMT Machine Industry and Trade Ltd. Co. Talassoft Industrial Management Software allows Cross Site Request Forgery.
This issue affects Talassoft Industrial Management Software: from V.4 before V.16.
🎖@cveNotify
siberguvenlik.gov.tr
T.C. Siber Güvenlik Başkanlığı
Türkiye Cumhuriyeti Cumhurbaşkanlığı Siber Güvenlik Başkanlığı resmi web sitesi.
🚨 CVE-2026-55951
The Erlang/OTP httpc HTTP client does not enforce a limit on the total size of response headers received from a server. The max_header_size option defaults to nolimit, and httpc_response:parse_headers/6 accumulates every header into a list before the length check runs (which only fires after the terminating CRLF CRLF is received).
A malicious or compromised HTTP server can send an arbitrarily large number of headers, or headers with very large values, causing the client process to allocate unbounded memory until the system runs out of memory or the BEAM VM crashes. A proof-of-concept server sending 100,000 headers of roughly 4000 bytes each caused the client VM to allocate over 13 GB of memory in under 30 seconds.
Any application using httpc:request/4,5 to connect to untrusted servers is affected. No authentication is required: any server the client connects to (including via a redirect or man-in-the-middle) can trigger the exhaustion.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
The Erlang/OTP httpc HTTP client does not enforce a limit on the total size of response headers received from a server. The max_header_size option defaults to nolimit, and httpc_response:parse_headers/6 accumulates every header into a list before the length check runs (which only fires after the terminating CRLF CRLF is received).
A malicious or compromised HTTP server can send an arbitrarily large number of headers, or headers with very large values, causing the client process to allocate unbounded memory until the system runs out of memory or the BEAM VM crashes. A proof-of-concept server sending 100,000 headers of roughly 4000 bytes each caused the client VM to allocate over 13 GB of memory in under 30 seconds.
Any application using httpc:request/4,5 to connect to untrusted servers is affected. No authentication is required: any server the client connects to (including via a redirect or man-in-the-middle) can trigger the exhaustion.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-58569
Dell PowerStore contains an Inclusion of Functionality from Untrusted Control Sphere vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to execute arbitrary code with root privileges..
🎖@cveNotify
Dell PowerStore contains an Inclusion of Functionality from Untrusted Control Sphere vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to execute arbitrary code with root privileges..
🎖@cveNotify
🚨 CVE-2026-59696
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP stdlib allows a remote attacker to degrade availability by supplying a URI whose port component is a very long run of digits.
uri_string:get_port/1 passes the port substring to binary_to_integer/1 with no length bound, catching only error:badarg, so a syntactically valid port of up to roughly 1.26 million digits converts successfully and costs the calling process hundreds of milliseconds of arbitrary-precision arithmetic. The conversion is reached from every authority-parsing path in uri_string:parse/1, including the host, registered-name, and IPv4 and IPv6 forms. parse/1 is the documented interface for parsing URIs, so any application that parses an attacker-supplied URI is exposed without further configuration. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 21.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to stdlib from 3.5 before 6.2.2.5, from 7.0 before 7.3.0.2, and from 8.0 before 8.0.4.
🎖@cveNotify
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP stdlib allows a remote attacker to degrade availability by supplying a URI whose port component is a very long run of digits.
uri_string:get_port/1 passes the port substring to binary_to_integer/1 with no length bound, catching only error:badarg, so a syntactically valid port of up to roughly 1.26 million digits converts successfully and costs the calling process hundreds of milliseconds of arbitrary-precision arithmetic. The conversion is reached from every authority-parsing path in uri_string:parse/1, including the host, registered-name, and IPv4 and IPv6 forms. parse/1 is the documented interface for parsing URIs, so any application that parses an attacker-supplied URI is exposed without further configuration. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 21.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to stdlib from 3.5 before 6.2.2.5, from 7.0 before 7.3.0.2, and from 8.0 before 8.0.4.
🎖@cveNotify
🚨 CVE-2026-66357
httpd has never implemented obs-fold (RFC 2616 §2.2 / RFC 7230 §3.2.4 header continuation lines). Every CRLF followed by a non-CRLF octet unconditionally starts a new header. This missing feature became a security concern as the understanding of HTTP request smuggling attacks evolved.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
httpd has never implemented obs-fold (RFC 2616 §2.2 / RFC 7230 §3.2.4 header continuation lines). Every CRLF followed by a non-CRLF octet unconditionally starts a new header. This missing feature became a security concern as the understanding of HTTP request smuggling attacks evolved.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-66835
Path Equivalence vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by prefixing the request path with an extra slash.
httpd_request:validate_uri/1 normalises the request URI with uri_string:normalize/1, which performs RFC 3986 dot-segment removal but does not collapse empty path segments, so a doubled slash survives. mod_alias:real_name/3 concatenates the document root with that URI, and mod_auth:secret_path/3 then decides whether the result lies inside a protected directory block by running the configured directory path as an unanchored regular expression against it. The doubled slash breaks the contiguous substring the regex needs, so the request is treated as unprotected and no authentication challenge is issued, while mod_get opens the same path and the operating system collapses the doubled slash and returns the protected file. The same path mismatch also evades the per-path accounting in mod_security.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Path Equivalence vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by prefixing the request path with an extra slash.
httpd_request:validate_uri/1 normalises the request URI with uri_string:normalize/1, which performs RFC 3986 dot-segment removal but does not collapse empty path segments, so a doubled slash survives. mod_alias:real_name/3 concatenates the document root with that URI, and mod_auth:secret_path/3 then decides whether the result lies inside a protected directory block by running the configured directory path as an unanchored regular expression against it. The doubled slash breaks the contiguous substring the regex needs, so the request is treated as unprotected and no authentication challenge is issued, while mod_get opens the same path and the operating system collapses the doubled slash and returns the protected file. The same path mismatch also evades the per-path accounting in mod_security.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-69664
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending a request with a chunked body whose chunk-size line is not a hexadecimal number. The worker serving the connection is never released and no timeout reclaims it, so repeating the request across connections occupies every available worker and denies service to legitimate clients. No authentication is required and the default configuration is affected.
The chunk-size line must arrive in a write separate from the headers. When the body accompanies the headers, httpd_request_handler:handle_body/3 calls http_chunk:decode/3 inside a try ... catch throw:Error, so the {error, {chunk_size, _}} thrown by http_chunk:decode_size/4 is answered with 400 Bad Request. When the chunk size arrives later, the decoder is resumed through a bare catch in httpd_request_handler:handle_info/2, which converts the throw into a return value rather than raising it; the resulting error tuple is then treated as the next decoder continuation, the socket is re-armed, and the worker waits for data that never comes. The request timeout has already been cancelled at the point the headers were accepted, and the periodic byte-rate check is only armed when minimum_bytes_per_second is configured, which it is not by default.
This issue affects OTP from OTP 18.1.4 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 6.0.3 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending a request with a chunked body whose chunk-size line is not a hexadecimal number. The worker serving the connection is never released and no timeout reclaims it, so repeating the request across connections occupies every available worker and denies service to legitimate clients. No authentication is required and the default configuration is affected.
The chunk-size line must arrive in a write separate from the headers. When the body accompanies the headers, httpd_request_handler:handle_body/3 calls http_chunk:decode/3 inside a try ... catch throw:Error, so the {error, {chunk_size, _}} thrown by http_chunk:decode_size/4 is answered with 400 Bad Request. When the chunk size arrives later, the decoder is resumed through a bare catch in httpd_request_handler:handle_info/2, which converts the throw into a return value rather than raising it; the resulting error tuple is then treated as the next decoder continuation, the socket is re-armed, and the worker waits for data that never comes. The request timeout has already been cancelled at the point the headers were accepted, and the periodic byte-rate check is only armed when minimum_bytes_per_second is configured, which it is not by default.
This issue affects OTP from OTP 18.1.4 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 6.0.3 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
🚨 CVE-2026-70399
Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by opening and holding open a large number of connections. The max_clients option is documented to default to 150, and the inets hardening guide presents that limit as the first layer of denial-of-service defence, but a server that does not set it explicitly accepts an unlimited number of simultaneous connections. Establishing the connections is sufficient; no valid request and no authentication are required.
The accept gate in httpd_manager:handle_new_connection/4 reads the option with httpd_util:lookup/2, which returns undefined when the key is absent, rather than the three-argument form carrying the 150 default that the neighbouring get_ustate/2 uses. Erlang term ordering places every integer before every atom, so the Count =< Max guard holds for any connection count and the server never returns {reject, busy}. Each accepted connection occupies a worker process and a socket for as long as it is held, driving the node towards process, memory and file descriptor exhaustion. Servers that set max_clients explicitly are unaffected, because a configured value is applied as intended.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by opening and holding open a large number of connections. The max_clients option is documented to default to 150, and the inets hardening guide presents that limit as the first layer of denial-of-service defence, but a server that does not set it explicitly accepts an unlimited number of simultaneous connections. Establishing the connections is sufficient; no valid request and no authentication are required.
The accept gate in httpd_manager:handle_new_connection/4 reads the option with httpd_util:lookup/2, which returns undefined when the key is absent, rather than the three-argument form carrying the 150 default that the neighbouring get_ustate/2 uses. Erlang term ordering places every integer before every atom, so the Count =< Max guard holds for any connection count and the server never returns {reject, busy}. Each accepted connection occupies a worker process and a socket for as long as it is held, driving the node towards process, memory and file descriptor exhaustion. Servers that set max_clients explicitly are unaffected, because a configured value is applied as intended.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2.
🎖@cveNotify
🚨 CVE-2026-70405
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP snmp allows a remote attacker to degrade availability by sending an SNMP message containing a BER INTEGER whose length field is arbitrarily large.
snmp_pdus:dec_integer_notag/1 defaults its size limit to infinity, and do_dec_integer_notag/2 then accumulates the value across every declared byte with a recursive shift and bitwise or. Work grows superlinearly in the declared length because each operation acts on a progressively larger bignum. The size-limited variant dec_integer_notag/2 exists but is reached from only one call site, dec_snmp_version/1, which bounds the version field to ten bytes; the request identifier, error status and index, generic and specific trap fields, engine boots and time, and every varbind value decoded by dec_value/1 all use the unbounded form. The decode runs before the PDU is processed, so no valid request is required beyond what the deployment demands to accept the message at all.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to snmp from 4.25.1 before 5.18.2.1, from 5.19 before 5.20.2.2, and from 5.20.3 before 5.20.5. Whether OTP before OTP 17.0, corresponding to snmp before 4.25.1, is affected is unknown.
🎖@cveNotify
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP snmp allows a remote attacker to degrade availability by sending an SNMP message containing a BER INTEGER whose length field is arbitrarily large.
snmp_pdus:dec_integer_notag/1 defaults its size limit to infinity, and do_dec_integer_notag/2 then accumulates the value across every declared byte with a recursive shift and bitwise or. Work grows superlinearly in the declared length because each operation acts on a progressively larger bignum. The size-limited variant dec_integer_notag/2 exists but is reached from only one call site, dec_snmp_version/1, which bounds the version field to ten bytes; the request identifier, error status and index, generic and specific trap fields, engine boots and time, and every varbind value decoded by dec_value/1 all use the unbounded form. The decode runs before the PDU is processed, so no valid request is required beyond what the deployment demands to accept the message at all.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to snmp from 4.25.1 before 5.18.2.1, from 5.19 before 5.20.2.2, and from 5.20.3 before 5.20.5. Whether OTP before OTP 17.0, corresponding to snmp before 4.25.1, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-70409
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP eldap allows a malicious or compromised LDAP server to degrade availability by returning a referral URL whose port component is a very long run of digits.
eldap:parse_port/2 passes the port substring straight to list_to_integer/1 with no length bound. The surrounding try ... catch only rejects a value that fails to parse, so a syntactically valid port of up to roughly 1.26 million digits converts successfully and costs the caller hundreds of milliseconds of arbitrary-precision arithmetic per referral. The conversion function itself is documented to accept integers of any size, so bounding the input is the caller's responsibility. Reaching the flaw requires the application to pass a server-supplied referral to eldap:parse_ldap_url/1, which eldap never calls itself: referral strings are returned to the caller unparsed.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to eldap from 1.0.3 before 1.2.14.2, from 1.2.15 before 1.2.16.1, and from 1.3 before 1.3.1.
🎖@cveNotify
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP eldap allows a malicious or compromised LDAP server to degrade availability by returning a referral URL whose port component is a very long run of digits.
eldap:parse_port/2 passes the port substring straight to list_to_integer/1 with no length bound. The surrounding try ... catch only rejects a value that fails to parse, so a syntactically valid port of up to roughly 1.26 million digits converts successfully and costs the caller hundreds of milliseconds of arbitrary-precision arithmetic per referral. The conversion function itself is documented to accept integers of any size, so bounding the input is the caller's responsibility. Reaching the flaw requires the application to pass a server-supplied referral to eldap:parse_ldap_url/1, which eldap never calls itself: referral strings are returned to the caller unparsed.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to eldap from 1.0.3 before 1.2.14.2, from 1.2.15 before 1.2.16.1, and from 1.3 before 1.3.1.
🎖@cveNotify
🚨 CVE-2026-71380
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete.
httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete.
httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-71562
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP inets httpc allows a malicious or compromised HTTP server to degrade availability by returning a numeric header whose value is a very long run of digits.
httpc_handler.erl converts the server-supplied Content-Length with list_to_integer/1 before comparing it against max_body_size, so the size check cannot protect the conversion, and the option defaults to nolimit in any case. The same unbounded conversion appears in httpc_response:format_response/1 for Content-Length and in httpc_response:get_ms_from_retry_after/1 for Retry-After, which is guarded only by a check that the first character is a digit. A value of up to roughly 1.26 million digits converts successfully and costs the requesting process hundreds of milliseconds of arbitrary-precision arithmetic per response. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP inets httpc allows a malicious or compromised HTTP server to degrade availability by returning a numeric header whose value is a very long run of digits.
httpc_handler.erl converts the server-supplied Content-Length with list_to_integer/1 before comparing it against max_body_size, so the size check cannot protect the conversion, and the option defaults to nolimit in any case. The same unbounded conversion appears in httpc_response:format_response/1 for Content-Length and in httpc_response:get_ms_from_retry_after/1 for Retry-After, which is guarded only by a check that the first character is a digit. A value of up to roughly 1.26 million digits converts successfully and costs the requesting process hundreds of milliseconds of arbitrary-precision arithmetic per response. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-73270
Improper Handling of Case Sensitivity vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by requesting them with different casing, on deployments whose filesystem is case-insensitive.
mod_auth:secret_path/3 decides whether a resolved filesystem path lies inside a protected directory block by running the configured directory path through re:run/3 without the caseless option. A request for /secret/file against a directory configured as /Secret therefore does not match, so the request is treated as unprotected and no authentication challenge is issued, while the filesystem resolves the differently cased path to the same file and mod_get serves it. Deployments on case-sensitive filesystems are unaffected, because there the filesystem itself rejects the mismatched casing.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
Improper Handling of Case Sensitivity vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by requesting them with different casing, on deployments whose filesystem is case-insensitive.
mod_auth:secret_path/3 decides whether a resolved filesystem path lies inside a protected directory block by running the configured directory path through re:run/3 without the caseless option. A request for /secret/file against a directory configured as /Secret therefore does not match, so the request is treated as unprotected and no authentication challenge is issued, while the filesystem resolves the differently cased path to the same file and mod_get serves it. Deployments on case-sensitive filesystems are unaffected, because there the filesystem itself rejects the mismatched casing.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
🚨 CVE-2026-73812
httpd function check_header/3 rejects duplicate Content-Length (per CVE-2026-23941) but never checks for the TE+CL co-presence that RFC 9112 §6.3 identifies as a probable smuggling attempt. handle_body/3 frames by chunked and silently discards Content-Length. A CL-preferring front-end paired with chunked-preferring inets creates a classic CL.TE front-end/back-end desync.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify
httpd function check_header/3 rejects duplicate Content-Length (per CVE-2026-23941) but never checks for the TE+CL co-presence that RFC 9112 §6.3 identifies as a probable smuggling attempt. handle_body/3 frames by chunked and silently discards Content-Length. A CL-preferring front-end paired with chunked-preferring inets creates a classic CL.TE front-end/back-end desync.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown.
🎖@cveNotify