🚨 CVE-2026-78422
Subject::new_for_owner() in the zbus_polkit crate encodes the uid entry of a unix-process polkit subject as an unsigned 32-bit integer (D-Bus type u), whereas the org.freedesktop.PolicyKit1.Authority interface specifies a signed 32-bit integer (D-Bus type i). Because of this type mismatch, polkit silently discards the caller-supplied UID and instead determines the subject's owner itself by looking up the PID in /proc, a lookup that is inherently subject to a time-of-check/time-of-use race.

Consequently, an application that passes a UID obtained from a trustworthy source — for example SO_PEERCRED Unix socket peer credentials — in order to defend against PID reuse receives no protection, and the supplied UID has no effect on the authorization decision. A local unprivileged attacker who can cause an authorized process to terminate and then win the race to have their own process assigned the same PID can be authorized under the identity of the terminated process, bypassing the polkit authorization check and performing actions the attacker is not entitled to.

This issue affects zbus_polkit before 5.1.0.

🎖@cveNotify

🚨 CVE-2026-21827
HCL Connections is vulnerable to an information disclosure vulnerability which could allow a user to obtain sensitive information they are not entitled to, caused by improper handling of request data they are not entitled to, caused by improper handling of request data.

🎖@cveNotify

🚨 CVE-2026-51698
Incorrect access control in the setUrlFilterRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to alter browsing policies via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

🎖@cveNotify

🚨 CVE-2026-51700
Incorrect access control in the setWiFiAdvancedCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to degrade wireless behavior via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

🎖@cveNotify

🚨 CVE-2026-51713
Incorrect access control in the setManualDialCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to manipulate WAN dial state via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

🎖@cveNotify

🚨 CVE-2026-51715
Incorrect access control in the delMacFilterRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to remove MAC filter rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

🎖@cveNotify

🚨 CVE-2026-14366
The Silicon Labs SiWx917 WiFi driver's transmit callback siwx91x_send() in drivers/wifi/siwx91x/siwx91x_wifi.c frees a network packet it does not own. In the Zephyr TX path the net_pkt is owned by the L2/networking stack; the driver only borrows it to copy the frame bytes into a local net_buf. Before the fix, after transmitting, siwx91x_send() additionally called net_pkt_unref(pkt) on the caller-owned packet, dropping its last reference and returning it to the shared packet pool prematurely. This code path is compiled in by default (CONFIG_WIFI_SILABS_SIWX91X_NET_STACK_NATIVE).

The caller, ethernet_send() in subsys/net/l2/ethernet/ethernet.c, keeps using the packet after the driver returns: it reads net_pkt_get_len(pkt), updates TX statistics, and then performs its own net_pkt_unref(pkt). Because the driver already released the packet, these are use-after-free reads followed by a second unref (a double free). When concurrent network activity recycles the freed slab slot between the two unrefs, the trailing unref decrements a different, live packet's reference count and frees it, corrupting the net_pkt pool shared by both the receive and transmit paths.

The defect is exercised by ordinary transmission over the native-stack SiWx917 WiFi interface, and an adjacent attacker on the same WiFi network can induce transmissions (for example ARP or ICMP echo replies, or TCP handshakes) to drive the path. The primary observable impact is loss of availability (transmit hangs and crashes from pool corruption), with race-dependent memory corruption of the kernel networking buffer pool. The fix removes the erroneous net_pkt_unref(pkt) from siwx91x_send(); the driver's receive-path unref, which correctly frees a packet the driver itself allocated, is unaffected.

🎖@cveNotify

🚨 CVE-2026-51721
Incorrect access control in the setPairCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to alter the mesh pairing state via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

🎖@cveNotify

🚨 CVE-2026-51722
Incorrect access control in the setWiFiRepeaterCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to repoint the device to an attacker-controlled upstream Wi-Fi via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

🎖@cveNotify

🚨 CVE-2026-51724
Incorrect access control in the delSmartQosCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to remove Smart QoS rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

🎖@cveNotify

🚨 CVE-2026-51726
Incorrect access control in the delParentalRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to remove parental-control rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

🎖@cveNotify

🚨 CVE-2026-51729
Incorrect access control in the delDevice function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to request deletion of a managed slave device via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

🎖@cveNotify

🚨 CVE-2026-79746
MCPHub is a unified hub for centrally managing and dynamically orchestrating multiple MCP servers/APIs into separate endpoints with flexible routing strategies. Prior to version 1.0.31, when a bearer key with accessType: 'servers' (or 'custom') is used against a group route, isBearerKeyAllowedForRequest grants access to the entire group as long as any single server in that group appears in the key's allowedServers list — not only when every server the key is scoped to matches, and critically, without ever re-checking allowedServers again once the group-level connection is authorized. A key explicitly scoped to one specific server therefore also grants full access to every other server that happens to share a group with it, including servers the key was never authorized for. This issue has been patched in version 1.0.31.

🎖@cveNotify

🚨 CVE-2023-20511
Release of an invalid pointer in the AMD kernel mode driver (KMD) could allow a privileged attacker to create a double free condition potentially leading to arbitrary code execution.

🎖@cveNotify

🚨 CVE-2023-31308
A malicious virtual function can invoke the certain command handlers in the SMU, causing a denial of service due to out-of-bounds memory read.

🎖@cveNotify

🚨 CVE-2026-14367
The I3C IBI subsystem in drivers/i3c/i3c_ibi_workq.c hands out statically-allocated work nodes through a free-list i3c_ibi_work_nodes_free implemented as a plain sys_slist_t, which provides no synchronization. The allocation helpers (i3c_ibi_work_enqueue, i3c_ibi_work_enqueue_target_irq, i3c_ibi_work_enqueue_hotjoin, i3c_ibi_work_enqueue_controller_request, i3c_ibi_work_enqueue_cb) called sys_slist_get() directly from ISR context, while the workqueue handler i3c_ibi_work_handler() returned nodes with sys_slist_append() from the workqueue thread, with no lock on either side.

Because sys_slist_get() and sys_slist_append() are neither atomic nor interrupt-safe, an IBI interrupt that fires while the workqueue thread is mid-append (or a truly parallel access under CONFIG_SMP) races on the shared list. This corrupts the list linkage: a node may be handed to two consumers, a node may be lost, or the head/tail pointers may be left inconsistent so sys_slist_get() returns a stale or garbage pointer. In the double-hand-out case the subsequent memcpy(ibi_node, ibi_work, sizeof(*ibi_node)) overwrites a node still in flight; a garbage pointer turns the same memcpy into an out-of-bounds write.

The race is driven by I3C bus traffic — IBIs, hot-joins, and controller-role requests originate from target devices on the bus, and I3C supports hot-joining devices. An attacker controlling an I3C peripheral on the board's chip-to-chip bus can generate high-frequency interrupts timed to collide with the free operation. Exploitation requires physical access to the bus and winning a narrow timing window; the most realistic impact is a crash or hang (denial of service), with memory corruption possible but hard to control.

The fix wraps all free-list sys_slist_get()/sys_slist_append() operations in the new ibi_work_alloc()/ibi_work_free() helpers, each guarded by a k_spinlock (ibi_work_lock), closing the race across ISR and thread contexts.

🎖@cveNotify

🚨 CVE-2026-14368
The LwM2M JSON content formatter's get_string() in subsys/net/lib/lwm2m/lwm2m_rw_json.c copies a parsed JSON string into a caller-supplied buffer and NUL-terminates it. The length guard used if (string_length > buflen), which accepts a string whose length is exactly buflen. After memcpy() fills the whole buffer, buf[string_length] = '\0' then writes one byte past the end of the buffer (CWE-787).

The string value and its length are taken directly from the incoming CoAP payload during a LwM2M WRITE: do_write_op_json() parses the payload obtained from coap_packet_get_payload(), and get_string() is invoked from lwm2m_write_handler() (engine_get_string() in subsys/net/lib/lwm2m/lwm2m_message_handling.c) for a LWM2M_RES_TYPE_STRING resource. The destination buf/buflen is either the resource instance's fixed data buffer (res_inst->data_ptr/max_data_len) or the engine validation buffer (msg->ctx->validate_buf). A LwM2M server (the client's DTLS peer) can therefore write a string resource with a value whose length equals the target buffer size and force a one-byte overflow.

The overflow is a single out-of-bounds write of the constant byte 0x00 immediately past the resource or validation buffer, corrupting the adjacent byte in memory. It is not an information leak and the written value is fixed, so it is not a direct code-execution primitive, but it can corrupt adjacent state (an adjacent resource value, a length/flag field, or a struct field) and cause data corruption or a crash. Triggering the write is deterministic; the resulting impact depends on memory layout.

The fix changes the guard to string_length >= buflen, rejecting the exact-length case and aligning the JSON formatter with the other content formatters (lwm2m_rw_plain_text.c, lwm2m_rw_oma_tlv.c, lwm2m_rw_senml_json.c, lwm2m_rw_cbor.c, lwm2m_rw_senml_cbor.c), which already used the correct boundary check.

🎖@cveNotify

🚨 CVE-2026-14696
When Ethernet bridging is enabled (CONFIG_NET_ETHERNET_BRIDGE), eth_bridge_input_process() in subsys/net/l2/ethernet/bridge/bridge_input.c decides how each frame received on a bridge member interface is handled. For frames that must also be delivered to the local stack, the code called eth_bridge_handle_locally() and returned NET_OK. That helper does not consume the packet — it only calls bridge_iface_recv() (via virtual_recv()), which returns NET_CONTINUE without taking ownership of pkt.

The NET_OK verdict then propagates through ethernet_recv() up to processing_data() in subsys/net/ip/net_core.c, where NET_OK is interpreted as "the packet was consumed, do not free it." Because no consumer actually took ownership, the RX net_pkt is never returned to the pool and is leaked. The concretely reproducible leak occurs for frames whose EtherType has no registered L3 handler when CONFIG_NET_ETHERNET_FORWARD_UNRECOGNISED_ETHERTYPE is set (default y when CONFIG_NET_SOCKETS_PACKET is enabled): the fall-through L3 dispatch does not overwrite the NET_OK verdict, so ethernet_recv() returns NET_OK and the buffer is never released.

Any device on a bridged L2 segment can emit broadcast/multicast frames carrying an arbitrary EtherType with no authentication. Each such frame permanently consumes one buffer from the finite RX pool (CONFIG_NET_PKT_RX_COUNT), so a brief broadcast flood exhausts the pool and the device can no longer receive traffic until it is rebooted — a persistent denial of service. There is no confidentiality or integrity impact.

The fix makes eth_bridge_handle_locally() propagate the real net_verdict and return NET_CONTINUE for locally-kept frames, writing the bridge interface back through a new dst_iface out-parameter so the packet follows the normal receive path and is unreferenced exactly once.

🎖@cveNotify

🚨 CVE-2026-53507
oasdiff-action is a GitHub Action that detects breaking changes in OpenAPI specs and post a review on every pull request. Before version 0.0.51, the oasdiff actions resolved external $refs in the OpenAPI spec by default (allow-external-refs: true). When an action runs on a pull request whose spec is attacker-controlled — most importantly fork pull requests on public repositories — a $ref in that spec is fetched/read on the runner with no interaction required, enabling SSRF and disclosure of structured files on the runner. This issue has been patched in version 0.0.51.

🎖@cveNotify

🚨 CVE-2026-53552
Goploy is an open-source automation deployment system. In versions 1.17.5 and prior, Project.AddFile, Project.EditFile, Project.RemoveFile, and Project.Edit in cmd/server/api/project/handler.go accept a project or project-file row id from the JSON body and act on it without checking that the project belongs to the caller's namespace. The corresponding model.ProjectFile.GetData and model.Project.GetData queries filter only by row id. A user holding the manager role (or any role that includes the FileSync / EditProject permission) in their own namespace can read, write, or delete files in any project across the install, and can rewrite any project's git remote URL by submitting the foreign id in the body. The git-URL primitive escalates to RCE on the next deploy because Edit runs git remote set-url on the project's working tree. At time of publication, there are no known publicly available patches.

🎖@cveNotify

🚨 CVE-2026-83497
Unrestricted deserialization of untrusted data in the cursor pagination component in the OpenSearch SQL plugin allows a remote authenticated user with basic read/search permissions to execute arbitrary code on the server by sending a crafted cursor parameter to the plugins/sql endpoint.

🎖@cveNotify