🚨 CVE-2026-78363
The MW WP Form WordPress plugin before 5.1.5 does not prevent shortcodes in user-submitted values from being executed when it merges those values into a message that it later processes for shortcodes, allowing unauthenticated users to run any shortcode registered on the site. Exploitation requires the site to have been configured to echo a submitted value back to the visitor after submission.
🎖@cveNotify
The MW WP Form WordPress plugin before 5.1.5 does not prevent shortcodes in user-submitted values from being executed when it merges those values into a message that it later processes for shortcodes, allowing unauthenticated users to run any shortcode registered on the site. Exploitation requires the site to have been configured to echo a submitted value back to the visitor after submission.
🎖@cveNotify
WPScan
MW WP Form < 5.1.5 - Unauthenticated Arbitrary Shortcode Execution via Completion Message Merge Tags
See details on MW WP Form < 5.1.5 - Unauthenticated Arbitrary Shortcode Execution via Completion Message Merge Tags CVE 2026-78363. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2026-5121
A flaw was found in libarchive. On 32-bit systems, an integer overflow vulnerability exists in the zisofs block pointer allocation logic. A remote attacker can exploit this by providing a specially crafted ISO9660 image, which can lead to a heap buffer overflow. This could potentially allow for arbitrary code execution on the affected system.
🎖@cveNotify
A flaw was found in libarchive. On 32-bit systems, an integer overflow vulnerability exists in the zisofs block pointer allocation logic. A remote attacker can exploit this by providing a specially crafted ISO9660 image, which can lead to a heap buffer overflow. This could potentially allow for arbitrary code execution on the affected system.
🎖@cveNotify
🚨 CVE-2026-6862
A flaw was found in libefiboot, a component of efivar. The device path node parser in libefiboot fails to validate that each node's Length field is at least 4 bytes, which is the minimum size for an EFI (Extensible Firmware Interface) device path node header. A local user could exploit this vulnerability by providing a specially crafted device path node. This can lead to infinite recursion, causing stack exhaustion and a process crash, resulting in a denial of service (DoS).
🎖@cveNotify
A flaw was found in libefiboot, a component of efivar. The device path node parser in libefiboot fails to validate that each node's Length field is at least 4 bytes, which is the minimum size for an EFI (Extensible Firmware Interface) device path node header. A local user could exploit this vulnerability by providing a specially crafted device path node. This can lead to infinite recursion, causing stack exhaustion and a process crash, resulting in a denial of service (DoS).
🎖@cveNotify
Redhat
CVE-2026-6862 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-44604
A command injection vulnerability was discovered in the `rpmuncompress` utility of RPM. When extracting certain archive formats (ZIP, 7z, GEM) to a specified destination directory, the tool inserts the archive's top-level folder name into a shell command without properly sanitizing it. A specially crafted archive containing shell metacharacters in its folder name can execute arbitrary commands as the user running the extraction.
🎖@cveNotify
A command injection vulnerability was discovered in the `rpmuncompress` utility of RPM. When extracting certain archive formats (ZIP, 7z, GEM) to a specified destination directory, the tool inserts the archive's top-level folder name into a shell command without properly sanitizing it. A specially crafted archive containing shell metacharacters in its folder name can execute arbitrary commands as the user running the extraction.
🎖@cveNotify
🚨 CVE-2026-55654
A flaw was found in OpenSSH. This vulnerability, a heap out-of-bounds read, occurs during the cleanup of GSSAPI (Generic Security Service Application Programming Interface) indicators when a trailing NULL termination is missing in the auth-indicators array. A remote attacker, under specific configurations involving GSSAPI authentication and a Kerberos environment, could exploit this to cause the SSH authentication path to crash or abort. This leads to a denial of service (DoS), impacting the availability of the SSH service.
🎖@cveNotify
A flaw was found in OpenSSH. This vulnerability, a heap out-of-bounds read, occurs during the cleanup of GSSAPI (Generic Security Service Application Programming Interface) indicators when a trailing NULL termination is missing in the auth-indicators array. A remote attacker, under specific configurations involving GSSAPI authentication and a Kerberos environment, could exploit this to cause the SSH authentication path to crash or abort. This leads to a denial of service (DoS), impacting the availability of the SSH service.
🎖@cveNotify
🚨 CVE-2026-55655
A flaw was found in OpenSSH. A local unprivileged attacker on a Linux client host can hijack client-side X11 forwarding connections. This is possible by pre-binding the preferred abstract X socket name when X11 forwarding is enabled and a local UNIX-domain X socket is used. A successful attack can compromise the confidentiality of forwarded X11 traffic, including sensitive window contents and input, and may allow some manipulation of the forwarded session.
🎖@cveNotify
A flaw was found in OpenSSH. A local unprivileged attacker on a Linux client host can hijack client-side X11 forwarding connections. This is possible by pre-binding the preferred abstract X socket name when X11 forwarding is enabled and a local UNIX-domain X socket is used. A successful attack can compromise the confidentiality of forwarded X11 traffic, including sensitive window contents and input, and may allow some manipulation of the forwarded session.
🎖@cveNotify
🚨 CVE-2026-43961
A flaw was found in Vim's netrw plugin. A crafted filename containing quote characters and expression fragments can break out of the quoted context during mark/unmark operations, allowing arbitrary Vimscript execution. This can be leveraged to run shell commands with the privileges of the user running Vim.
🎖@cveNotify
A flaw was found in Vim's netrw plugin. A crafted filename containing quote characters and expression fragments can break out of the quoted context during mark/unmark operations, allowing arbitrary Vimscript execution. This can be leveraged to run shell commands with the privileges of the user running Vim.
🎖@cveNotify
Redhat
CVE-2026-43961 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-19873
HTML::FormFu versions through 2.08 for Perl allow resource exhaustion via an unbounded repeat count from the query string in Repeatable elements.
When a Repeatable element has counter_name set, its process method reads the repeat count from the named query string parameter, checks only that it is a positive integer, and passes it to repeat, which deep-clones the element's child subtree once per iteration. Nothing caps the value, and no attribute lets an application impose a limit.
The count is read on every request, before the form decides whether it was submitted, so a plain GET reaches the clone loop with no credentials, no session and no request body. Nesting multiplies: a Repeatable inside a Repeatable takes a counter at each level, so an outer and an inner value of 100 build 10,000 clones.
Once the form is submitted, each cloned field's constraints scan the whole element tree in _find_field_value, so cost grows faster than linearly with the count. A single request exhausts memory and CPU.
The latest release on CPAN is 2.07, from 2018. Version 2.08 exists only in the git repository.
🎖@cveNotify
HTML::FormFu versions through 2.08 for Perl allow resource exhaustion via an unbounded repeat count from the query string in Repeatable elements.
When a Repeatable element has counter_name set, its process method reads the repeat count from the named query string parameter, checks only that it is a positive integer, and passes it to repeat, which deep-clones the element's child subtree once per iteration. Nothing caps the value, and no attribute lets an application impose a limit.
The count is read on every request, before the form decides whether it was submitted, so a plain GET reaches the clone loop with no credentials, no session and no request body. Nesting multiplies: a Repeatable inside a Repeatable takes a counter at each level, so an outer and an inner value of 100 build 10,000 clones.
Once the form is submitted, each cloned field's constraints scan the whole element tree in _find_field_value, so cost grows faster than linearly with the count. A single request exhausts memory and CPU.
The latest release on CPAN is 2.07, from 2018. Version 2.08 exists only in the git repository.
🎖@cveNotify
GitHub
CVE-2026-19873 Repeatable counter_name takes an unbounded repeat count straight from the query string (CPU/memory DoS) · Issue…
Note: the description below was machine-generated for CPANSec. The issue has been assigned CVE-2026-19873, and has been added here publicly as per request from Dean Hamstead. When a Repeatable elem...
🚨 CVE-2026-18743
A flaw was found in popt. This vulnerability allows an attacker to provide specially crafted configuration content to a host, which, when loaded, can lead to a small memory corruption issue. This occurs because of an error in how the `poptConfigFileToString` function reallocates memory for buffers. Successful exploitation could result in heap metadata corruption, potentially causing the affected process to become unavailable (denial of service).
🎖@cveNotify
A flaw was found in popt. This vulnerability allows an attacker to provide specially crafted configuration content to a host, which, when loaded, can lead to a small memory corruption issue. This occurs because of an error in how the `poptConfigFileToString` function reallocates memory for buffers. Successful exploitation could result in heap metadata corruption, potentially causing the affected process to become unavailable (denial of service).
🎖@cveNotify
Redhat
CVE-2026-18743 - Red Hat Customer Portal
CVE Details App
👍1
🚨 CVE-2026-17523
A flaw was found in the Linux kernel in net/can/bcm.c in can: bcm, where an unprivileged local user can exploit this vulnerability to execute arbitrary code within the kernel, which leads to a local privilege escalation (LPE). This allows the attacker to gain root privileges and take full control of the affected system.
🎖@cveNotify
A flaw was found in the Linux kernel in net/can/bcm.c in can: bcm, where an unprivileged local user can exploit this vulnerability to execute arbitrary code within the kernel, which leads to a local privilege escalation (LPE). This allows the attacker to gain root privileges and take full control of the affected system.
🎖@cveNotify
🚨 CVE-2026-15101
The WPBakery Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'data' parameter in all versions up to, and including, 8.7.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The wp_kses_post sanitization applied during save does not neutralize the payload because the malicious script content is base64-encoded as plain alphanumeric text with no HTML tags to strip; the vc_raw_html shortcode template then decodes and echoes this content unescaped at render time.
🎖@cveNotify
The WPBakery Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'data' parameter in all versions up to, and including, 8.7.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The wp_kses_post sanitization applied during save does not neutralize the payload because the malicious script content is base64-encoded as plain alphanumeric text with no HTML tags to strip; the vc_raw_html shortcode template then decodes and echoes this content unescaped at render time.
🎖@cveNotify
🚨 CVE-2026-16786
The Live Composer – Free WordPress Website Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via dslc_module_testimonials_output Shortcode in all versions up to, and including, 2.1.19 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload survives save-time wp_kses_post filtering because KSES treats shortcode delimiters as opaque, and the unescaped fields — including main_heading_title, view_all_link, main_heading_link_title, and main_filter_title_all — are only rendered when do_shortcode() executes at page-view time.
🎖@cveNotify
The Live Composer – Free WordPress Website Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via dslc_module_testimonials_output Shortcode in all versions up to, and including, 2.1.19 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload survives save-time wp_kses_post filtering because KSES treats shortcode delimiters as opaque, and the unescaped fields — including main_heading_title, view_all_link, main_heading_link_title, and main_filter_title_all — are only rendered when do_shortcode() executes at page-view time.
🎖@cveNotify
🚨 CVE-2026-16788
The Live Composer – Free WordPress Website Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via dslc_module_projects_output Shortcode in all versions up to, and including, 2.1.19 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. WordPress's shortcode-aware kses handling preserves the serialized shortcode body as a placeholder before content filtering runs, allowing attacker-controlled values such as view_all_link, main_heading_link_title, main_filter_title_all, and button_text to reach render-time sinks entirely unescaped.
🎖@cveNotify
The Live Composer – Free WordPress Website Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via dslc_module_projects_output Shortcode in all versions up to, and including, 2.1.19 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. WordPress's shortcode-aware kses handling preserves the serialized shortcode body as a placeholder before content filtering runs, allowing attacker-controlled values such as view_all_link, main_heading_link_title, main_filter_title_all, and button_text to reach render-time sinks entirely unescaped.
🎖@cveNotify
🚨 CVE-2026-19914
The Welcart e-Commerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'custom_order' parameter in all versions up to, and including, 2.12.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload is delivered via the guest checkout form, requiring no authentication, and executes when an administrator views the affected order in the WordPress admin panel.
🎖@cveNotify
The Welcart e-Commerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'custom_order' parameter in all versions up to, and including, 2.12.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload is delivered via the guest checkout form, requiring no authentication, and executes when an administrator views the affected order in the WordPress admin panel.
🎖@cveNotify
🚨 CVE-2026-25706
Improper neutralization of special elements used in an OS command in yast2-samba-client allows an attacker who controls the content of an Active Directory directory tree - a rogue domain controller, or a directory user delegated the right to create objects - to execute arbitrary commands as root on a machine being joined to that domain.
This issue affects yast2-samba-client through 5.0.4.
🎖@cveNotify
Improper neutralization of special elements used in an OS command in yast2-samba-client allows an attacker who controls the content of an Active Directory directory tree - a rogue domain controller, or a directory user delegated the right to create objects - to execute arbitrary commands as root on a machine being joined to that domain.
This issue affects yast2-samba-client through 5.0.4.
🎖@cveNotify
🚨 CVE-2026-59680
An OS command injection vulnerability was found in yast2-users. When displaying the "Password Settings" tab of a user, get_password_term() in src/include/users/dialogs.rb read the shadowLastChange and shadowExpire fields with GetString(), which performs no numeric validation, and passed the resulting string to format_days_after_epoch(). That helper interpolated the value into a shell command executed via Ruby backticks without quoting or escaping.
Impact: an administrator who manages users against an external/federated LDAP directory via `yast2 users` triggers root command execution the moment they view or edit that particular user's "Password Settings" tab. No "join domain" or trust setup is required, just browsing/editing one user entry.
This issue affects yast2-users through 5.0.8.
🎖@cveNotify
An OS command injection vulnerability was found in yast2-users. When displaying the "Password Settings" tab of a user, get_password_term() in src/include/users/dialogs.rb read the shadowLastChange and shadowExpire fields with GetString(), which performs no numeric validation, and passed the resulting string to format_days_after_epoch(). That helper interpolated the value into a shell command executed via Ruby backticks without quoting or escaping.
Impact: an administrator who manages users against an external/federated LDAP directory via `yast2 users` triggers root command execution the moment they view or edit that particular user's "Password Settings" tab. No "join domain" or trust setup is required, just browsing/editing one user entry.
This issue affects yast2-users through 5.0.8.
🎖@cveNotify
🚨 CVE-2026-59681
A OS command injection vulnerability in yast2-auth-client allows an attacker who controls Active Directory configuration values to execute arbitrary commands as root on the configured host.
Auth::AuthConf in src/lib/auth/authconf.rb assembles the Samba net ads join, net ads lookup -S and net ads testjoin invocations by interpolating configuration values into a single command string and passing that string to Open3.popen2 / Open3.capture2, which causes Ruby to run it through /bin/sh. The Organizational Unit (ou), dnshostname, AD user name and AD domain name values are neither validated nor shell-quoted.
🎖@cveNotify
A OS command injection vulnerability in yast2-auth-client allows an attacker who controls Active Directory configuration values to execute arbitrary commands as root on the configured host.
Auth::AuthConf in src/lib/auth/authconf.rb assembles the Samba net ads join, net ads lookup -S and net ads testjoin invocations by interpolating configuration values into a single command string and passing that string to Open3.popen2 / Open3.capture2, which causes Ruby to run it through /bin/sh. The Organizational Unit (ou), dnshostname, AD user name and AD domain name values are neither validated nor shell-quoted.
🎖@cveNotify
🚨 CVE-2026-4813
A vulnerability in the Lutece Core XSL export management module up to version 7.1.7, which allows authenticated administrators to execute code remotely. The XML/XSLT processing configuration does not enable secure processing mode (FEATURE_SECURE_PROCESSING), allowing Java extension functions to be executed from malicious XSL stylesheets. An attacker with administrator privileges can upload a manipulated XSL transformation file and trigger its execution during user export operations, resulting in the execution of arbitrary code on the server.
🎖@cveNotify
A vulnerability in the Lutece Core XSL export management module up to version 7.1.7, which allows authenticated administrators to execute code remotely. The XML/XSLT processing configuration does not enable secure processing mode (FEATURE_SECURE_PROCESSING), allowing Java extension functions to be executed from malicious XSL stylesheets. An attacker with administrator privileges can upload a manipulated XSL transformation file and trigger its execution during user export operations, resulting in the execution of arbitrary code on the server.
🎖@cveNotify
www.incibe.es
Code injection in the Lutece Core
INCIBE has coordinated the disclosure of a critical-severity vulnerability in Lutece Core, an open pla
🚨 CVE-2026-82926
NULL pointer dereference vulnerability in Samsung Open Source mTower allows Pointer Manipulation.
This issue affects mTower: before afef59aa6f55c5d5ebf9b14bc020bf1c2c37489a.
🎖@cveNotify
NULL pointer dereference vulnerability in Samsung Open Source mTower allows Pointer Manipulation.
This issue affects mTower: before afef59aa6f55c5d5ebf9b14bc020bf1c2c37489a.
🎖@cveNotify
GitHub
fix(tee): reject invalid session in invoke to close NULL-deref DoS (#247) by bmolodan · Pull Request #248 · Samsung/mTower
Description
Fixes a HIGH-severity, unauthenticated denial of service of the secure world,
reachable from the non-secure world through the live cmse_nonsecure_entry
ioctl() veneer.
tee_ioctl_invoke(...
Fixes a HIGH-severity, unauthenticated denial of service of the secure world,
reachable from the non-secure world through the live cmse_nonsecure_entry
ioctl() veneer.
tee_ioctl_invoke(...
🚨 CVE-2026-82927
Untrusted pointer dereference vulnerability in Samsung Open Source mTower allows Pointer Manipulation.
This issue affects mTower: before 06994e303637512e39062f3e037c222e8448e57e.
🎖@cveNotify
Untrusted pointer dereference vulnerability in Samsung Open Source mTower allows Pointer Manipulation.
This issue affects mTower: before 06994e303637512e39062f3e037c222e8448e57e.
🎖@cveNotify
GitHub
fix(tee): validate non-secure pointers at the secure-world boundary (#249) by bmolodan · Pull Request #250 · Samsung/mTower
Description
Fixes a HIGH/CRITICAL break of the TrustZone-M isolation guarantee: a
non-secure caller can make the secure world read from and write to secure
memory on its behalf, through the live cm...
Fixes a HIGH/CRITICAL break of the TrustZone-M isolation guarantee: a
non-secure caller can make the secure world read from and write to secure
memory on its behalf, through the live cm...
🚨 CVE-2026-84059
A flaw has been found in ICP DAS UA-2200 and UA-5200 up to 20260704. The affected element is the function ArmAngstromInstructionSet of the file /CGI?RestApi=SetHostname. Executing a manipulation of the argument ParameterArray can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A flaw has been found in ICP DAS UA-2200 and UA-5200 up to 20260704. The affected element is the function ArmAngstromInstructionSet of the file /CGI?RestApi=SetHostname. Executing a manipulation of the argument ParameterArray can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
uvxbywu62qm.feishu.cn
Docs