🚨 CVE-2025-8419
A vulnerability was found in Keycloak-services. Special characters used during e-mail registration may perform SMTP Injection and unexpectedly send short unwanted e-mails. The email is limited to 64 characters (limited local part of the email), so the attack is limited to very shorts emails (subject and little data, the example is 60 chars). This flaw's only direct consequence is an unsolicited email being sent from the Keycloak server. However, this action could be a precursor for more sophisticated attacks.
🎖@cveNotify
A vulnerability was found in Keycloak-services. Special characters used during e-mail registration may perform SMTP Injection and unexpectedly send short unwanted e-mails. The email is limited to 64 characters (limited local part of the email), so the attack is limited to very shorts emails (subject and little data, the example is 60 chars). This flaw's only direct consequence is an unsolicited email being sent from the Keycloak server. However, this action could be a precursor for more sophisticated attacks.
🎖@cveNotify
🚨 CVE-2025-10939
A flaw was found in Keycloak. The Keycloak guides recommend to not expose /admin path to the outside in case the installation is using a proxy. The issue occurs at least via ha-proxy, as it can be tricked to using relative/non-normalized paths to access the /admin application path relative to /realms which is expected to be exposed.
🎖@cveNotify
A flaw was found in Keycloak. The Keycloak guides recommend to not expose /admin path to the outside in case the installation is using a proxy. The issue occurs at least via ha-proxy, as it can be tricked to using relative/non-normalized paths to access the /admin application path relative to /realms which is expected to be exposed.
🎖@cveNotify
🚨 CVE-2026-76131
Use of hard-coded credentials issue exists in VOCALOID6 , which may allow an attacker to impersonate a legitimate VOCALOID6 Editor and gain access to Yamaha's activation and content servers.
🎖@cveNotify
Use of hard-coded credentials issue exists in VOCALOID6 , which may allow an attacker to impersonate a legitimate VOCALOID6 Editor and gain access to Yamaha's activation and content servers.
🎖@cveNotify
jvn.jp
JVNVU#90210212: Multiple vulnerabilities in Yamaha VOCALOID6 Editor
Japan Vulnerability Notes
🚨 CVE-2026-77956
Improper Control of Generation of Code (Code Injection) vulnerability in ash-project ash_ai allows a remote, unauthenticated client to execute arbitrary Elixir code.
AshAi.Actions.Prompt evaluates prompt content through EEx.eval_string/2. The documented prompt: fn input, context -> ... end form lets the prompt content be built from action arguments, so when a prompt action's text incorporates request data, that attacker-controlled text is compiled and run as an EEx template (Elixir source). Content such as <%= System.cmd(...) %> therefore executes on the server before any model request is made, requiring no authentication beyond reaching a prompt action. The fix stops evaluating function-supplied prompt content as EEx; only statically configured templates are evaluated.
This issue affects ash_ai: from 0.1.0 before 1.0.0.
🎖@cveNotify
Improper Control of Generation of Code (Code Injection) vulnerability in ash-project ash_ai allows a remote, unauthenticated client to execute arbitrary Elixir code.
AshAi.Actions.Prompt evaluates prompt content through EEx.eval_string/2. The documented prompt: fn input, context -> ... end form lets the prompt content be built from action arguments, so when a prompt action's text incorporates request data, that attacker-controlled text is compiled and run as an EEx template (Elixir source). Content such as <%= System.cmd(...) %> therefore executes on the server before any model request is made, requiring no authentication beyond reaching a prompt action. The fix stops evaluating function-supplied prompt content as EEx; only statically configured templates are evaluated.
This issue affects ash_ai: from 0.1.0 before 1.0.0.
🎖@cveNotify
🚨 CVE-2026-81315
Origin Validation Error vulnerability in ash-project ash_ai allows a malicious web page to bypass the MCP server's DNS-rebinding protection and issue cross-site requests to a user's local MCP server with that user's actor.
In AshAi.Mcp.Server, with the default allowed_origins: nil, origin_allowed?/3 accepts an origin when uri.host == conn.host and the forwarded scheme is https. Both values are attacker-controlled: conn.host comes from the Host header and the scheme is read from the raw x-forwarded-proto header with no trusted-proxy check. Under DNS rebinding the browser sends the attacker's origin and a matching host, and page JavaScript may set X-Forwarded-Proto: https, so the check passes with no TLS or proxy involved. The fix trusts only localhost origins by default; other origins require an explicit allowed_origins allowlist.
This issue affects ash_ai: from 0.8.0 before 1.0.0.
🎖@cveNotify
Origin Validation Error vulnerability in ash-project ash_ai allows a malicious web page to bypass the MCP server's DNS-rebinding protection and issue cross-site requests to a user's local MCP server with that user's actor.
In AshAi.Mcp.Server, with the default allowed_origins: nil, origin_allowed?/3 accepts an origin when uri.host == conn.host and the forwarded scheme is https. Both values are attacker-controlled: conn.host comes from the Host header and the scheme is read from the raw x-forwarded-proto header with no trusted-proxy check. Under DNS rebinding the browser sends the attacker's origin and a matching host, and page JavaScript may set X-Forwarded-Proto: https, so the check passes with no TLS or proxy involved. The fix trusts only localhost origins by default; other origins require an explicit allowed_origins allowlist.
This issue affects ash_ai: from 0.8.0 before 1.0.0.
🎖@cveNotify
🚨 CVE-2026-82597
A vulnerability was identified in TOTOLINK NR1800X 9.1.0u.6681_B20230703. This affects the function setUssd of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ussd leads to command injection. The attack can be initiated remotely. The exploit is publicly available and might be used.
🎖@cveNotify
A vulnerability was identified in TOTOLINK NR1800X 9.1.0u.6681_B20230703. This affects the function setUssd of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ussd leads to command injection. The attack can be initiated remotely. The exploit is publicly available and might be used.
🎖@cveNotify
GitHub
-/TOTOlink/totolink setuuid命令注入.pdf at main · lxiansheng488-bit/-
漏洞库. Contribute to lxiansheng488-bit/- development by creating an account on GitHub.
🚨 CVE-2026-82598
A vulnerability was determined in SeaCMS up to 13.6. Affected is the function parseIf of the file search.php of the component Template Engine. This manipulation of the argument searchtype causes code injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.
🎖@cveNotify
A vulnerability was determined in SeaCMS up to 13.6. Affected is the function parseIf of the file search.php of the component Template Engine. This manipulation of the argument searchtype causes code injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.
🎖@cveNotify
GitHub
seacms-13.6-security-advisories/c-009-search-cascade-template-rce.md at a084a3e573240d54860153321df271280daec262 · T-Chachamaru/seacms…
Contribute to T-Chachamaru/seacms-13.6-security-advisories development by creating an account on GitHub.
🚨 CVE-2026-82599
A vulnerability was identified in SeaCMS up to 13.6. Affected by this vulnerability is the function unlink of the file /member.php?action=chgpwdsubmit of the component Avatar Upload. Such manipulation of the argument oldpic leads to path traversal. It is possible to launch the attack remotely. The exploit is publicly available and might be used.
🎖@cveNotify
A vulnerability was identified in SeaCMS up to 13.6. Affected by this vulnerability is the function unlink of the file /member.php?action=chgpwdsubmit of the component Avatar Upload. Such manipulation of the argument oldpic leads to path traversal. It is possible to launch the attack remotely. The exploit is publicly available and might be used.
🎖@cveNotify
GitHub
seacms-13.6-security-advisories/c-002b-member-oldpic-file-deletion.md at a084a3e573240d54860153321df271280daec262 · T-Chachamaru/seacms…
Contribute to T-Chachamaru/seacms-13.6-security-advisories development by creating an account on GitHub.
🚨 CVE-2026-75760
Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_ai discloses provider request state and credentials in a user-facing validation error.
In AshAi.Changes.Vectorize, when the embedding provider call fails the change added a changeset error whose message inspected the raw error term (An error occurred while generating embeddings: #{inspect(error)}). A plain-string add_error produces an Ash.Error.Changes.InvalidChanges in the :invalid class, which AshJsonApi and AshGraphql render back to the caller. The embedding client's error term is not sanitized, so it can carry the request URL, the provider response body, and, for HTTP clients that keep the request in the error struct, the outbound Authorization header with the provider API key. Failures are attacker-reachable via oversized or malformed vectorized content. The fix logs the raw error and returns a generic message.
This issue affects ash_ai: from 0.1.0 before 1.0.0.
🎖@cveNotify
Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_ai discloses provider request state and credentials in a user-facing validation error.
In AshAi.Changes.Vectorize, when the embedding provider call fails the change added a changeset error whose message inspected the raw error term (An error occurred while generating embeddings: #{inspect(error)}). A plain-string add_error produces an Ash.Error.Changes.InvalidChanges in the :invalid class, which AshJsonApi and AshGraphql render back to the caller. The embedding client's error term is not sanitized, so it can carry the request URL, the provider response body, and, for HTTP clients that keep the request in the error struct, the outbound Authorization header with the provider API key. Failures are attacker-reachable via oversized or malformed vectorized content. The fix logs the raw error and returns a generic message.
This issue affects ash_ai: from 0.1.0 before 1.0.0.
🎖@cveNotify
🚨 CVE-2026-82564
Authorization Bypass Through User-Controlled Key vulnerability in ash-project ash_ai allows a caller of an identity-configured tool to update or destroy records it never identified, including every row in the table.
In AshAi.Tool.Execution, identity_filter/3 built the update/destroy filter directly from the raw tool arguments as [{key, Map.get(arguments, to_string(key))}] and passed it to Ash.Query.do_filter/2. A map value is parsed as a predicate expression rather than a literal, so a caller can send {"public_ref": {"not_eq": "<own-ref>"}} and, combined with Ash.Query.limit(1) and Ash.bulk_update!/Ash.bulk_destroy!, retarget the write at a record it never identified; an omitted key yields an IS NULL filter that matches an arbitrary row. The fix casts each identity value to the field type, rejecting non-scalar inputs.
This issue affects ash_ai: from 0.6.0 before 1.0.0.
🎖@cveNotify
Authorization Bypass Through User-Controlled Key vulnerability in ash-project ash_ai allows a caller of an identity-configured tool to update or destroy records it never identified, including every row in the table.
In AshAi.Tool.Execution, identity_filter/3 built the update/destroy filter directly from the raw tool arguments as [{key, Map.get(arguments, to_string(key))}] and passed it to Ash.Query.do_filter/2. A map value is parsed as a predicate expression rather than a literal, so a caller can send {"public_ref": {"not_eq": "<own-ref>"}} and, combined with Ash.Query.limit(1) and Ash.bulk_update!/Ash.bulk_destroy!, retarget the write at a record it never identified; an omitted key yields an IS NULL filter that matches an arbitrary row. The fix casts each identity value to the field type, rejecting non-scalar inputs.
This issue affects ash_ai: from 0.6.0 before 1.0.0.
🎖@cveNotify
🚨 CVE-2026-82579
Loop with Unreachable Exit Condition (Infinite Loop) vulnerability in ash-project ash_ai allows an attacker who can influence a model's output to hang the tool loop and drive unbounded, repeated model requests.
AshAi.ToolLoop classifies a model response of :tool_calls, then filters the calls through normalize_tool_calls/2 and unprocessed_tool_calls/2. Both can empty the list: a call missing a valid name, or one reusing a tool_call_id that already has a result in history, is dropped. With an empty list the loop appended nothing and recursed with a byte-identical message list, so the conversation never advanced and the same request was re-sent every iteration. Under the supported max_iterations: :infinity this never terminated; otherwise it exhausted the full budget. Prompt-injected content can make the model re-emit a spent tool_call_id. The fix treats an empty post-filter list as terminal.
This issue affects ash_ai: from 0.6.0 before 1.0.0.
🎖@cveNotify
Loop with Unreachable Exit Condition (Infinite Loop) vulnerability in ash-project ash_ai allows an attacker who can influence a model's output to hang the tool loop and drive unbounded, repeated model requests.
AshAi.ToolLoop classifies a model response of :tool_calls, then filters the calls through normalize_tool_calls/2 and unprocessed_tool_calls/2. Both can empty the list: a call missing a valid name, or one reusing a tool_call_id that already has a result in history, is dropped. With an empty list the loop appended nothing and recursed with a byte-identical message list, so the conversation never advanced and the same request was re-sent every iteration. Under the supported max_iterations: :infinity this never terminated; otherwise it exhausted the full budget. Prompt-injected content can make the model re-emit a spent tool_call_id. The fix treats an empty post-filter list as terminal.
This issue affects ash_ai: from 0.6.0 before 1.0.0.
🎖@cveNotify
🚨 CVE-2026-82580
Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_ai discloses internal error text to chat users.
In AshAi.ToolLoop and AshAi.Tools, an exception raised while executing a tool was serialized verbatim with Exception.message/1 into the tool-result content. That content is appended to the conversation, emitted as a {:tool_result, ...} stream event, and sent back to the model, which typically relays it to the user. No filtering happened first, so anything raised inside a tool callback or lifecycle hook (database constraint messages, adapter errors, query fragments, policy or validation internals) was echoed as-is. A chat user who can steer tool arguments into a raising code path receives the raw internal text. The fix routes raised tool errors through the same safe formatter used for other tool errors.
This issue affects ash_ai: from 0.6.0 before 1.0.0.
🎖@cveNotify
Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_ai discloses internal error text to chat users.
In AshAi.ToolLoop and AshAi.Tools, an exception raised while executing a tool was serialized verbatim with Exception.message/1 into the tool-result content. That content is appended to the conversation, emitted as a {:tool_result, ...} stream event, and sent back to the model, which typically relays it to the user. No filtering happened first, so anything raised inside a tool callback or lifecycle hook (database constraint messages, adapter errors, query fragments, policy or validation internals) was echoed as-is. A chat user who can steer tool arguments into a raising code path receives the raw internal text. The fix routes raised tool errors through the same safe formatter used for other tool errors.
This issue affects ash_ai: from 0.6.0 before 1.0.0.
🎖@cveNotify
🚨 CVE-2026-82600
A security flaw has been discovered in SeaCMS up to 13.6. Affected by this issue is some unknown functionality of the file /zyapi.php?ac=videolist. Performing a manipulation of the argument ids results in sql injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.
🎖@cveNotify
A security flaw has been discovered in SeaCMS up to 13.6. Affected by this issue is some unknown functionality of the file /zyapi.php?ac=videolist. Performing a manipulation of the argument ids results in sql injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.
🎖@cveNotify
GitHub
seacms-13.6-security-advisories/c-004-zyapi-ids-sql-injection.md at a084a3e573240d54860153321df271280daec262 · T-Chachamaru/seacms…
Contribute to T-Chachamaru/seacms-13.6-security-advisories development by creating an account on GitHub.
🚨 CVE-2026-82601
A weakness has been identified in SeaCMS up to 13.6. This affects an unknown part of the file /err.php. Executing a manipulation of the argument errtxt can lead to cross site scripting. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.
🎖@cveNotify
A weakness has been identified in SeaCMS up to 13.6. This affects an unknown part of the file /err.php. Executing a manipulation of the argument errtxt can lead to cross site scripting. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.
🎖@cveNotify
GitHub
seacms-13.6-security-advisories/c-007-errtxt-reflected-xss.md at a084a3e573240d54860153321df271280daec262 · T-Chachamaru/seacms…
Contribute to T-Chachamaru/seacms-13.6-security-advisories development by creating an account on GitHub.
🚨 CVE-2026-82602
A security vulnerability has been detected in SeaCMS up to 13.6. This vulnerability affects unknown code of the file /ass.php. The manipulation leads to authorization bypass. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.
🎖@cveNotify
A security vulnerability has been detected in SeaCMS up to 13.6. This vulnerability affects unknown code of the file /ass.php. The manipulation leads to authorization bypass. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.
🎖@cveNotify
GitHub
seacms-13.6-security-advisories/c-011-ass-paywall-url-disclosure.md at a084a3e573240d54860153321df271280daec262 · T-Chachamaru/seacms…
Contribute to T-Chachamaru/seacms-13.6-security-advisories development by creating an account on GitHub.
🚨 CVE-2026-82603
A vulnerability was detected in SeaCMS up to 13.6. This issue affects some unknown processing of the file /member.php?action=del_pl of the component Comment Cache. The manipulation of the argument itype/vid results in path traversal. The attack may be launched remotely. The exploit is now public and may be used.
🎖@cveNotify
A vulnerability was detected in SeaCMS up to 13.6. This issue affects some unknown processing of the file /member.php?action=del_pl of the component Comment Cache. The manipulation of the argument itype/vid results in path traversal. The attack may be launched remotely. The exploit is now public and may be used.
🎖@cveNotify
GitHub
seacms-13.6-security-advisories/c-008-member-del-pl-js-file-deletion.md at a084a3e573240d54860153321df271280daec262 · T-Chachamaru/seacms…
Contribute to T-Chachamaru/seacms-13.6-security-advisories development by creating an account on GitHub.
🚨 CVE-2026-82604
A flaw has been found in BareBones BBEdit up to 15.5.5. Impacted is an unknown function of the component Java Language Module. This manipulation causes uncontrolled recursion. Remote exploitation of the attack is possible. Upgrading to version 16.0 is recommended to address this issue. You should upgrade the affected component.
🎖@cveNotify
A flaw has been found in BareBones BBEdit up to 15.5.5. Impacted is an unknown function of the component Java Language Module. This manipulation causes uncontrolled recursion. Remote exploitation of the attack is possible. Upgrading to version 16.0 is recommended to address this issue. You should upgrade the affected component.
🎖@cveNotify
Ciphersecuritylabs
cipher security labs
cipher security labs performs deep technical security research across real-world software, systems, and adversarial techniques.
🚨 CVE-2025-5222
A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution.
🎖@cveNotify
A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution.
🎖@cveNotify
🚨 CVE-2026-33845
A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service.
🎖@cveNotify
A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service.
🎖@cveNotify
🚨 CVE-2026-33846
A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption.
🎖@cveNotify
A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption.
🎖@cveNotify
🚨 CVE-2026-42010
A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process.
🎖@cveNotify
A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process.
🎖@cveNotify