🚨 CVE-2026-80724
In the Linux kernel, the following vulnerability has been resolved:

ptp: vmclock: prevent read-only mappings from becoming writable

vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock
ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the
page read-only and then upgrade it to writable with mprotect(), after
which the guest can corrupt the host-written timekeeping data (sequence
counter, UTC time, TSC offset) that the vmclock ABI defines as read-only.

Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 does for its read-only objects and as fixed in drm/vc4
(CVE-2026-68445) and drm/panthor (CVE-2024-53071).

🎖@cveNotify

🚨 CVE-2026-80725
In the Linux kernel, the following vulnerability has been resolved:

net: gro: properly validate BIG TCP aggregation criteria

When GRO attempts to aggregate packets beyond GRO_LEGACY_MAX_SIZE (64KB),
BIG TCP should only be permitted for plain IPv4 TCP and plain IPv6 TCP
(with sufficient MAC header room to insert the temporary HBH jumbo header).

However, commit b1a78b9b9886 ("net: add support for ipv4 big tcp")
loosened the check in skb_gro_receive(), leading to several issues:

1. skb_gro_receive() checked skb_headroom(p) instead of the actual space
before the MAC header (p->mac_header). Because skb_headroom(p) includes
mac_len, crafted frames (e.g. injected via AF_PACKET) can pass the check
with p->mac_header < 8 bytes. When ipv6_gro_complete() inserts the
temporary HBH jumbo header, the memmove() starts before skb->head,
causing an out-of-bounds write and wrapping skb->mac_header.
2. It allowed non-IP protocols such as software VLAN (ETH_P_8021Q /
ETH_P_8021AD) to aggregate beyond 64KB because
p->protocol != ETH_P_IPV6 was true.
3. It checked p->encapsulation instead of NAPI_GRO_CB(skb)->encap_mark,
allowing encapsulated flows (e.g. SIT / IPv6-in-IPv4) to aggregate
beyond 64KB.

Fix skb_gro_receive() to strictly enforce:
- NAPI_GRO_CB(skb)->proto == IPPROTO_TCP
- Not encapsulated (!NAPI_GRO_CB(skb)->encap_mark && !p->encapsulation)
- Protocol must be either ETH_P_IP or ETH_P_IPV6
- If ETH_P_IPV6, p->mac_header must be at least
sizeof(struct hop_jumbo_hdr)

Returning -E2BIG from skb_gro_receive() ensures that packets which cannot
become BIG TCP are cleanly flushed at <= 64KB and delivered intact without
dropping.

This issue does not exist in mainline (7.0+) because the subsystem was
rewritten in commit 81be30c1f5f2 ("net/ipv6: Drop HBH for BIG TCP on RX
side"), making this fix relevant only for older stable branches like
6.18.y.

🎖@cveNotify

🚨 CVE-2026-82364
A security vulnerability has been detected in macrozheng mall up to 1.0.3. This impacts an unknown function of the file /order/submit of the component Order Submission. The manipulation leads to race condition. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The vendor deleted the GitHub issue for this vulnerability without and explanation.

🎖@cveNotify

🚨 CVE-2026-6827
justhtml before 1.17.0 contains multiple security issues in sanitization, serialization, and programmatic DOM handling. When custom policies preserve foreign namespaces (SVG/MathML), dangerous content such as HTML integration points (SVG <foreignObject>, MathML <annotation-xml encoding="text/html">) and mutation-XSS parser-differential payloads could survive sanitization and become active HTML after reparse; SVG filter="url(...)" and preserved <style> could leave resource-loading CSS (@import, background-image:url()). Programmatic script/style/Comment nodes could serialize into active markup. Additional hardening fixes address sanitize-pipeline cache mutation and DOM parent/child cycles that could cause infinite loops. Most issues affect advanced or custom configurations rather than the default JustHTML(..., sanitize=True) safe path.

🎖@cveNotify

🚨 CVE-2026-77088
justhtml versions 0.9.0 through 1.21.0 contain a cross-site scripting vulnerability in to_markdown() where inline code spans fail to account for blank lines as block boundaries. Attackers can inject blank lines into code or pre element text to break the inline span, causing sanitized HTML to be emitted unescaped and re-parsed as live Markdown by compliant renderers.

🎖@cveNotify

🚨 CVE-2026-78206
exceljs through 4.4.0 decompresses all entries from supplied xlsx archives into memory without limits on entry size, total size, or compression ratio. Attackers can upload highly compressed workbooks that expand to gigabytes in memory, exhausting available resources and causing denial of service.

🎖@cveNotify

🚨 CVE-2026-78207
exceljs through 4.4.0 contains a prototype pollution vulnerability in the deepMerge helper that fails to reject __proto__, constructor, or prototype keys when merging note objects. Attackers can assign parsed JSON with a malicious __proto__ property to cell notes, modifying Object.prototype and affecting all plain objects created in the process.

🎖@cveNotify

🚨 CVE-2026-78208
exceljs through 4.4.0 contains a path traversal vulnerability in the Workbook.addImage() function that fails to validate file paths. Attackers can supply arbitrary file paths to read any file accessible to the Node.js process and embed it in the generated workbook.

🎖@cveNotify

🚨 CVE-2026-78209
exceljs through 4.4.0 fails to neutralize leading equals, plus, minus, or at signs in cell values written to CSV output. Attackers who can influence exported cell values can inject formulas that execute when the CSV file is opened in a spreadsheet application, potentially exfiltrating data or performing other malicious actions.

🎖@cveNotify

🚨 CVE-2026-77915
rConfig Core 8.0.0 before 8.2.10 contains an authentication bypass vulnerability that allows unauthenticated attackers to self-register accounts with full Administrator privileges due to a duplicate bare Auth::routes() call in routes/web.php that re-enables the POST /register route after it was explicitly disabled. Attackers can register a new account that is immediately authenticated with Admin-level access because the registration controller does not assign a role and the users.role column defaults to Admin, enabling access to stored device credentials, user data, and API token issuance.

🎖@cveNotify

🚨 CVE-2026-72699
The Grav Login plugin (getgrav/grav-plugin-login) before 3.9.1 is vulnerable to email address enumeration. The register() method in classes/Login.php throws a distinct exception (EMAIL_NOT_AVAILABLE) when a submitted email address already belongs to an existing account, while allowing registration to proceed otherwise. Because the registration endpoint has no rate limiting, an attacker can enumerate which email addresses have accounts on the site, one guess per request.

🎖@cveNotify

🚨 CVE-2026-79658
Ech0 before 5.0.1 does not impose any size or shape limit on the Accept-Language header processed by its i18n middleware, which runs on every HTTP request. The header is passed unfiltered to go-i18n's NewLocalizer, which internally calls golang.org/x/text/language.ParseAcceptLanguage. The CVE-2022-32149 mitigation in x/text caps '-' characters but not '_' characters, which the parser aliases to '-', allowing quadratic-time parsing to be triggered with a large header (up to Go's default 1 MiB) built from underscore separators. An unauthenticated attacker can send such requests to consume roughly 1.5 seconds of CPU each, and concurrent requests can saturate a multi-core server (denial of service).

🎖@cveNotify

🚨 CVE-2026-79671
Ech0 before 4.4.3 contains a server-side request forgery vulnerability in the validateWebhookURL function (webhook_setting_service.go), which only validates literal IP addresses via net.ParseIP() and fails to reject hostnames that DNS-resolve to private or internal IPs (e.g., 169.254.169.254.nip.io). An attacker with admin privileges can create a webhook with such a hostname to bypass validation and cause the server to make requests to internal services, cloud metadata endpoints, and private network resources. The issue is fixed in 4.4.3.

🎖@cveNotify

🚨 CVE-2026-79775
rclone versions >= v1.72.0 and <= v1.74.4 (fixed in v1.75.0) contain multiple denial-of-service vulnerabilities in the archive backend's SquashFS parser, which relies on the github.com/diskfs/go-diskfs dependency. The parser fails to validate attacker-controlled superblock and metadata values before use. An attacker who can place or modify a SquashFS image in storage exposed through an rclone :archive: remote can craft a malicious image that triggers an integer division-by-zero panic (zero block size), an out-of-bounds slice panic (out-of-range inode metadata offset), or a non-progress CPU loop (truncated metadata stream). Variants 1 and 2 terminate the rclone process and, via 'rclone serve sftp', can crash the entire SFTP server; variant 3 causes sustained CPU consumption. Parsing is lazy, so a victim or remote client must address or descend into the malicious archive object to trigger it.

🎖@cveNotify

🚨 CVE-2026-80192
@better-auth/sso before 1.6.27 (and before 1.4.8 in the 1.4.x line and before 1.7.0-rc.5 in the 1.7 prerelease line) contains two domain-ownership flaws. When domain verification is disabled, automatic organization assignment accepts unverified provider domains, allowing an authenticated organization owner/administrator to register an SSO provider for an arbitrary domain and have users with matching email domains added to the attacker's organization with default member permissions. When domain verification is enabled, a race condition between the verify-domain and update-provider endpoints can apply completed DNS proof to a different domain; combined with implicit account linking, this can link an attacker-controlled identity provider to an existing user account. Exploitation requires the SSO plugin (and, for the org-assignment path, the organization plugin) with the relevant configuration enabled.

🎖@cveNotify

🚨 CVE-2026-81678
AVideo before 24.0 contains a server-side request forgery vulnerability in the isSSRFSafeURL function that fails to extract embedded IPv4 addresses from NAT64, 6to4, and Teredo IPv6 transition address formats. Unauthenticated attackers can bypass SSRF protections via the LiveLinks proxy endpoint to reach internal services and cloud metadata endpoints by encoding private IPv4 targets in transition address formats.

🎖@cveNotify

🚨 CVE-2026-81732
WWBN AVideo through version 30.0 fails to enforce authentication on the report4.json.php and report4.1.json.php endpoints, allowing unauthenticated access to user registration statistics. Attackers can send GET requests to these endpoints to retrieve daily and cumulative user-registration counts without any session or authorization.

🎖@cveNotify

🚨 CVE-2026-81733
WWBN AVideo through 30.0 (and master up to commit 4cb576e) contains a cross-site request forgery vulnerability in plugin/Live/myLiveControls.save.json.php. The endpoint only checks that a user is logged in and processes customUrl, customMessage, and autoRedirect parameters from $_REQUEST via a GET request without enforcing a CSRF token or origin check. An attacker who lures a logged-in streamer to a malicious page can silently change the live-channel viewer-redirect settings (persisted in users.externalOptions), causing viewers to be redirected to a phishing site or shown a spoofed message.

🎖@cveNotify

🚨 CVE-2026-82251
gitoxide before 0.52.1 fails to validate submodule names from .gitmodules configuration, allowing path traversal when deriving submodule git directories. Attackers can craft malicious submodule names with traversal segments to redirect state() and open() functions to repositories outside .git/modules, causing repository confusion and inspection of attacker-controlled repositories.

🎖@cveNotify

🚨 CVE-2026-82252
gitoxide before 0.52.1 follows symlinks when reading the worktree .gitmodules file, allowing attackers to inject out-of-repository bytes into submodule metadata. Attackers can create a malicious repository with a symlinked .gitmodules pointing outside the repository tree, causing gitoxide to parse arbitrary external files as submodule configuration and expose attacker-controlled name, path, and url values.

🎖@cveNotify

🚨 CVE-2026-56100
SpringBlade versions from 2.7.3 up to but not including 5.0.0 contain a privilege escalation vulnerability that allows authenticated attackers to create system administrator accounts by sending crafted POST requests to an unprotected internal Feign user-creation endpoint exposed via @RestController without authorization checks. Attackers can exploit the gateway's authentication filter, which only validates JWT parsing without verifying user roles or caller identity, and leverage a hardcoded JWT signing key embedded in publicly available JARs to forge tokens and escalate privileges from a low-privilege user to administrator, enabling cross-tenant data pollution and persistent backdoor access.

🎖@cveNotify