🚨 CVE-2026-77037
multer is a middleware for handling multipart/form-data in Node.js. In version 2.2.0, when a disk-backed upload is aborted or truncated before the write stream finishes, multer's disk storage engine removes the visible file but does not close the underlying write file descriptor, leaving a deleted but still open descriptor. A remote attacker able to reach an upload route using the built-in disk storage can send repeated aborted or malformed multipart uploads, each one leaking a file descriptor and retaining disk blocks until the process exits, which can exhaust resources and cause a denial of service. The issue is fixed in multer 2.3.0, which closes the destination write stream on abnormal source termination and defers cleanup until the stream has closed. Upgrade to multer 2.3.0 to remediate.

🎖@cveNotify

🚨 CVE-2026-77063
multer is a middleware for handling multipart/form-data in Node.js. When an application uses an asynchronous fileFilter together with the fileSize limit, a race condition in multer's file stream handling can allow a file that exceeds the configured size limit to bypass the size-limit rejection. All versions before 2.3.0 are affected. The impact is limited because the underlying multipart parser still truncates the stream at the size limit, so this is a bypass of the limit rejection rather than uncontrolled resource consumption. The issue is fixed in multer 2.3.0. Upgrade to multer 2.3.0 to remediate.

🎖@cveNotify

🚨 CVE-2026-77078
multer is a middleware for handling multipart/form-data in Node.js. A small multipart request containing two specially crafted text field names can cause an uncaught RangeError (Invalid array length) that terminates the Node.js process. The first field uses a very large numeric array index to allocate a maximum-length sparse array, and a second field then pushes past that length, which throws inside the append-field dependency and is not caught by multer. All versions before 2.3.0 are affected, and the issue is a remotely triggerable denial of service. The issue is fixed in multer 2.3.0. Upgrade to multer 2.3.0 to remediate.

🎖@cveNotify

🚨 CVE-2026-81490
A database user able to create a view in a namespace that MongoDB Connector for BI samples can cause the schema-sampling routine to stop functioning by defining a view whose evaluation reliably fails. The sampling logic classifies the resulting server message as transient and, after the configured retries are exhausted, proceeds without a valid result, ending the schema refresh routine. The mongosqld process continues running without a usable schema, so SQL clients are unable to obtain results until an operator removes the view or excludes its namespace from sampling.

🎖@cveNotify

🚨 CVE-2026-81517
An unauthenticated party able to reach the port of a MongoDB Connector for BI (mongosqld) instance may generate enough routine connection log activity to exhaust the storage backing the configured log path. When a log write or log rotation operation subsequently fails, the resulting error is not handled and the shared mongosqld process ends, ending service for all connected SQL clients. The process continues to end on startup until an operator restores available storage, and the diagnostic message explaining the condition is not recorded.

🎖@cveNotify

🚨 CVE-2026-81518
When mongosqld is configured with a client certificate authority file, the listener requests a client certificate during the TLS handshake but does not require one, so a client that presents no certificate is still accepted. In deployments that rely on client certificates as the sole means of identifying users, a remote party with network access to the listener can therefore establish a session and read the MongoDB data exposed through the connector.

🎖@cveNotify

🚨 CVE-2026-81532
A user able to submit SQL through an application using the MongoDB Connector for BI ODBC driver can supply a positioned-cursor statement whose cursor name exceeds the size of an internal fixed-length buffer. Because the name length is not bounded before the driver builds its diagnostic message, memory adjacent to that buffer is overwritten with user-supplied content. This can terminate the hosting application process and may allow unintended code to run within it.

🎖@cveNotify

🚨 CVE-2026-81533
An application using the MongoDB BI Connector ODBC Driver may encounter a memory-safety issue when a submitted SQL statement contains an unusually long run of digits following a LIMIT clause. The issue occurs only on connections where the driver's optional prefetch setting is enabled, and stems from the driver copying the digit sequence into a fixed-size internal buffer without checking its length. A user able to influence the numeric portion of a LIMIT clause could cause the hosting application process to terminate unexpectedly or corrupt adjacent memory in that process.

🎖@cveNotify

🚨 CVE-2026-82017
IGEL OS 12 before 12.7.6 and IGEL OS 11 before 11.11.150 contain a boot registry parameter injection vulnerability that allows attackers with physical access to execute arbitrary Linux loader parameters by writing to an unencrypted and unsigned configuration area read by the signed bootloader. Attackers can inject malicious kernel command line parameters that execute with boot environment privileges without triggering TPM PCR measurement failures, as the attack does not modify the measured boot code.

🎖@cveNotify

🚨 CVE-2026-82018
IGEL OS 12 before 12.9.0, 12.8.3 LTS and IGEL OS 11 before 11.11.150 contain a secure boot bypass vulnerability in the GRUB boot stage that allows physically present attackers to gain unauthorized root access by placing an unsigned empty file named igel.conf on a partition. Attackers can exploit GRUB's fail-open signature verification behavior to drop into an interactive GRUB prompt, then boot the device's own kernel with additional command-line arguments to obtain a root shell with the disk unlocked while leaving TPM PCR values unaltered.

🎖@cveNotify

🚨 CVE-2026-82333
multer is a middleware for handling multipart/form-data in Node.js. A small multipart request with two specially crafted text field names can make multer's field parser synchronously iterate a maximum-length sparse array, blocking the event loop so the process cannot handle other requests. A large numeric array index in the first field allocates a maximum-length sparse array, and a second field with a non-numeric key then triggers a full-length iteration inside the append-field dependency. All versions before 2.3.0 are affected, and this is a remotely triggerable denial of service. multer 2.3.0 adds an opt-in fieldArrayIndexLimit option that rejects oversized array indexes. Upgrade to multer 2.3.0 and set limits.fieldArrayIndexLimit to the largest array index your application needs to remediate.

🎖@cveNotify

🚨 CVE-2026-3639
The PPWP – Password Protect Pages plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's `ppwp` shortcode attributes in all versions up to, and including, 1.9.21 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

🎖@cveNotify

🚨 CVE-2026-8715
Vault Secrets Operator 1.3.0 up to 1.4.1 is vulnerable to an arbitrary file read and credential exfiltration issue in the AppRole authentication configuration that may allow a tenant with limited Kubernetes RBAC permissions to read files from the operator pod's filesystem and transmit their contents to a tenant-controlled endpoint, potentially leading to privilege escalation within the cluster. This vulnerability (CVE-2026-8715) is fixed in Vault Secrets Operator 1.5.0.

🎖@cveNotify

🚨 CVE-2024-58378
Nokogiri before 1.15.6 and 1.16.x before 1.16.2 (CRuby, when using the packaged libxml2) is affected by a use-after-free vulnerability in libxml2 (CVE-2024-25062) in the xmlTextReader module, which underlies Nokogiri::XML::Reader. When using the XML Reader interface with DTD validation and XInclude expansion enabled, processing a crafted XML document can lead to an xmlValidatePopElement use-after-free. Nokogiri 1.15.6 and 1.16.2 resolve this by upgrading the packaged libxml2 to 2.11.7 and 2.12.5 respectively. JRuby and installations using system libxml2 are not affected.

🎖@cveNotify

🚨 CVE-2026-55536
PraisonAI is a multi-agent teams system. Prior to praisonai 4.6.58, Browser Server _handle_connection() checks Chrome extension origins with re.match() and the unanchored expression chrome-extension://[a-z0-9]{32}. Extra trailing characters pass before websocket.accept(), allowing start_session commands and unauthorized browser automation. This issue is fixed in version 4.6.58.

🎖@cveNotify

🚨 CVE-2026-55582
mcp-shell is an MCP server for running shell commands securely, auditably, and on demand. Prior to 0.6.0, the default security.yaml allows /usr/bin/git, while security.go omits ! from containsShellMetacharacters and containsDangerousShellConstructs and applies no per-executable argument policy. A caller of the shell_exec MCP tool can provide the command argument /usr/bin/git -c alias.pwn=!<arbitrary-command>, causing Git to create a shell alias and execute arbitrary OS commands as the mcp-shell process user. The default Docker image runs as mcpuser with Git installed and secure mode enabled, so the bypass is exploitable in the default deployment without additional authentication beyond MCP connectivity. This issue is fixed in version 0.6.0.

🎖@cveNotify

🚨 CVE-2026-79772
Nokogiri versions before 1.19.1 fail to check the return value from xmlC14NExecute in the canonicalize method, returning an empty string on failure instead of raising an exception. Attackers can exploit this to bypass signature validation in downstream SAML libraries by providing invalid canonicalized XML that is incorrectly accepted as valid.

🎖@cveNotify

🚨 CVE-2026-79777
rclone before v1.75.0 includes full Go stack traces in RC API error responses when panics occur. Attackers can trigger panics to leak internal file paths, module versions, goroutine states, and memory addresses.

🎖@cveNotify

🚨 CVE-2026-79782
rclone before 1.74.4 fails to strip the X-Amz-Security-Token header when an S3 redirect changes scheme from HTTPS to HTTP on the same host. Attackers can intercept plaintext HTTP traffic to capture AWS STS session tokens sent in request headers.

🎖@cveNotify

🚨 CVE-2026-55585
QWED is open-source AI verification infrastructure for deterministic verification of LLM outputs, tool calls, code, schemas, and agent state before production execution. Prior to 5.1.2, the qwed package passes caller-controlled math expressions directly to SymPy parse_expr() without restricted global_dict and local_dict namespaces, allowing Python eval() to resolve builtins and execute arbitrary Python code in the API server process. In src/qwed_new/api/main.py, POST /verify/math is protected by get_current_tenant but accepts any valid tenant API key, reads the expression field, applies only a cosmetic re.sub(r'(\d)(()', r'\1*\2', expression) normalization, and passes the result to parse_expr(). In src/qwed_new/core/batch.py, POST /verify/batch sends math items through batch_service.create_job(), stores item.query verbatim, and _verify_item() passes VerificationType.MATH input to parse_expr() without sanitization. The default-enabled POST /auth/signup endpoint allows anyone to create a standard tenant account, POST /auth/api-keys issues an x-api-key, and either vulnerable path can then be used to read or write files, modify data, execute operating system commands, terminate the service, and compromise other tenants in a shared deployment. This issue is fixed in version 5.1.2.

🎖@cveNotify

🚨 CVE-2026-55618
eml_parser serves as a python module for parsing eml files and returning various information found in the e-mail as well as computed information. Prior to 3.0.2, the clean_found_uri function in eml_parser/parser.py validates potential URL strings before unescaping HTML entities used for colon, slash, or period characters. Valid encoded URLs and their host names are therefore rejected and omitted from the extracted URL and domain lists. Email security gateways and SOC pipelines that use those lists as indicators of compromise may fail to submit the hidden URLs to threat intelligence feeds, reputation services, or sandboxes, allowing malicious links to bypass inspection. This issue is fixed in version 3.0.2.

🎖@cveNotify