🚨 CVE-2026-44488
Axios is a promise based HTTP client for the browser and Node.js. Axios versions 1.7.0 through 1.15.x did not enforce configured request and response size limits when requests were sent with the fetch adapter. Applications that selected adapter: 'fetch', or ran in environments where axios resolved to the fetch adapter, could receive or send bodies larger than maxContentLength or maxBodyLength despite those limits being explicitly configured. This can cause resource exhaustion in server-side usage when a malicious or compromised server returns an oversized response, when an attacker can supply a large data: URL, or when an application forwards attacker-controlled request bodies through axios while relying on maxBodyLength as a boundary. This vulnerability is fixed in 0.32.0 and 1.16.0.

🎖@cveNotify

🚨 CVE-2026-44492
Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios does not normalise IPv4-mapped IPv6 addresses. When NO_PROXY lists an IPv4 address such as 127.0.0.1 or 169.254.169.254, a request URL using the IPv4-mapped IPv6 form (::ffff:7f00:1, ::ffff:a9fe:a9fe) still routes through the configured proxy. Node.js resolves these addresses to the underlying IPv4 host, so the request reaches the internal service via the proxy rather than being blocked. This vulnerability is fixed in 0.32.0 and 1.16.0.

🎖@cveNotify

🚨 CVE-2026-44494
Axios is a promise based HTTP client for the browser and Node.js. From 1.0.0 to before 1.16.0, the Axios library is vulnerable to a Prototype Pollution "Gadget" attack that allows any Object.prototype pollution in the application's dependency tree to be escalated into a full Man-in-the-Middle (MITM) attack — intercepting, reading, and modifying all HTTP traffic including authentication credentials. The HTTP adapter at lib/adapters/http.js:670 reads config.proxy via standard property access, which traverses the prototype chain. Because proxy is not present in Axios defaults, the merged config object has no own proxy property, making it trivially injectable via prototype pollution. Once injected, setProxy() routes all HTTP requests through the attacker's proxy server. This vulnerability is fixed in 1.16.0.

🎖@cveNotify

🚨 CVE-2026-44495
Axios is a promise based HTTP client for the browser and Node.js. From 0.19.0 to before 0.31.1 and 1.15.2, Axios contains prototype-pollution gadgets in request config processing. If another vulnerability in the same JavaScript process has already polluted Object.prototype.transformResponse, affected Axios versions may treat that inherited value as request configuration or as an option validator. Axios does not itself create the prototype pollution. Exploitability requires a separate prototype-pollution vulnerability or equivalent attacker control over Object.prototype before Axios creates a request. This vulnerability is fixed in 0.31.1 and 1.15.2.

🎖@cveNotify

🚨 CVE-2026-44496
Axios is a promise based HTTP client for the browser and Node.js. Axios versions before 0.32.0 on the 0.x line and before 1.16.0 on the 1.x line build a regular expression from the configured XSRF cookie name without escaping regex metacharacters. In standard browser environments, an attacker who can influence the cookie name passed to axios can cause expensive regex backtracking while axios reads document.cookie. The practical impact is client-side availability degradation, such as freezing the affected browser tab while axios prepares a request. The issue does not affect ordinary Node.js HTTP adapter usage, React Native, or web workers, where axios does not read document.cookie. This vulnerability is fixed in 0.32.0 and 1.16.0.

🎖@cveNotify

🚨 CVE-2026-12143
form-data is a library for creating readable multipart/form-data streams. In versions through 4.0.5, the `field` argument to `FormData#append` and the `filename` option are concatenated verbatim into the `Content-Disposition` header without escaping carriage return (CR), line feed (LF), or double-quote (") characters. An application that passes attacker-controlled data as a field name or filename (for example, an API gateway that turns JSON object keys into multipart field names) allows the attacker to terminate the header line and inject additional headers, or to smuggle entire additional multipart parts, into the request the application forwards to a backend. This can let the attacker add or override form fields (e.g. set `is_admin=true`) seen by the downstream parser. This is an instance of CWE-93 (CRLF injection). The fix escapes CR, LF, and `"` as `%0D`, `%0A`, and `%22` in field names and filenames, matching the serialization browsers use per the WHATWG HTML multipart/form-data encoding algorithm. Exploitation requires the consuming application to use untrusted input as a field name or filename; applications that use only fixed/trusted field names are not affected. Fixed in 2.5.6, 3.0.5, and 4.0.6.

🎖@cveNotify

🚨 CVE-2026-48779
ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0.

🎖@cveNotify

🚨 CVE-2026-6734
Impact:
When using Socks5ProxyAgent, undici reuses a single connection pool across different origins without verifying that the pool's origin matches the requested origin. All requests are dispatched through the pool connected to the first origin, regardless of the intended destination.

This causes cross-origin request routing: credentials and request data intended for origin B are sent to origin A, responses from the wrong origin are trusted, and HTTPS requests may be silently downgraded to HTTP.

Impacted users are applications that use Socks5ProxyAgent (directly or via setGlobalDispatcher) and make requests to more than one origin.

This was introduced in undici 7.23.0 via PR #4385 and affects all versions through 8.1.0.

Patches:
Upgrade to undici v7.26.0 or v8.2.0.

Workarounds:
Use a separate Socks5ProxyAgent instance per origin, or avoid using Socks5ProxyAgent with multiple origins.

🎖@cveNotify

🚨 CVE-2026-9697
Impact:
undici's ProxyAgent silently drops the requestTls option when configured with a SOCKS5 proxy URI (socks5:// or socks://). The target HTTPS connection through the SOCKS5 tunnel falls back to Node's default trust store, ignoring user-configured ca, cert, key, rejectUnauthorized, and servername settings.

Applications that pin to an internal or corporate CA via requestTls.ca will, when their proxy URI is SOCKS5, get the default Mozilla CA bundle as the trust anchor instead. Any cert signed by any publicly-trusted CA for the target hostname is accepted, breaking the intended pin and enabling MITM read and tamper of the HTTPS exchange.

Affected applications are those that use undici's ProxyAgent (or Socks5ProxyAgent directly) with SOCKS5 AND rely on requestTls for TLS scope restriction. The bug was introduced in undici 7.23.0 when SOCKS5 support was added.

Patches:
Upgrade to undici v7.28.0 or v8.5.0.

Workarounds:
No workaround is available within the SOCKS5 path. If a SOCKS5 proxy with TLS scope restriction is required and an upgrade is not yet possible, route the traffic through an HTTP-proxy ProxyAgent instead, where requestTls is honored correctly.

🎖@cveNotify

🚨 CVE-2026-56208
A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution.

🎖@cveNotify

🚨 CVE-2026-56209
An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution.

🎖@cveNotify

🚨 CVE-2026-56210
A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory).

🎖@cveNotify

🚨 CVE-2026-56211
A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames.

🎖@cveNotify

🚨 CVE-2026-54293
NLTK (Natural Language Toolkit) is a suite of open source Python modules, data sets, and tutorials supporting research and development in Natural Language Processing. Prior to 3.10.0-rc1, nltk.data.load() in NLTK is vulnerable to path traversal via URL-encoded path separators and traversal segments when using the nltk: URL scheme. The unsafe-path regex check is performed before url2pathname() decodes the %xx sequences (a classic decode-after-check / TOCTOU-style flaw), allowing an attacker to bypass the protection documented in NLTK's SECURITY.md and read arbitrary files from the filesystem. While literal traversal strings such as ../../../etc/passwd are correctly blocked, encoded variants such as %2fetc%2fpasswd, %2e%2e%2f..., and ..%2f..%2f slip past the regex and are subsequently decoded into a real filesystem path. This vulnerability is fixed in 3.10.0-rc1.

🎖@cveNotify

🚨 CVE-2026-44727
Jupyter Server is the backend for Jupyter web applications. Prior to 2.20, the nbconvert HTTP handlers in jupyter_server render user-authored notebook HTML under the Jupyter origin without a sandbox directive in their Content-Security-Policy. Combined with nbconvert.HTMLExporter's default non-sanitizing behavior, a notebook carrying an HTML payload in a display_data output triggers stored XSS with cookie access, full /api/* authority, and kernel RCE. This vulnerability is fixed in 2.20.

🎖@cveNotify

🚨 CVE-2026-56121
Feast before 0.63.0 contains an unsafe deserialization vulnerability that allows unauthenticated or unauthorized attackers to achieve remote code execution by sending a crafted gRPC request to the registry server. The user_defined_function.body field of an OnDemandFeatureView spec is decoded from base64 and passed to dill.loads() before any authorization check is performed, enabling attackers to embed a malicious serialized Python object with an arbitrary __reduce__ method to execute OS commands as the feast service account.

🎖@cveNotify

🚨 CVE-2026-44017
Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. Prior to 2.91.0, the EasyOCR model download functionality extracted ZIP archives without validating member paths, enabling Zip Slip attacks. If an attacker could compromise the model download source (via supply chain attack, DNS spoofing, or MITM), they could write arbitrary files to any location writable by the process, potentially achieving remote code execution by overwriting Python files or system binaries, persistent backdoors by modifying startup scripts or SSH keys, and data corruption or system compromise. This vulnerability is fixed in 2.91.0.

🎖@cveNotify

🚨 CVE-2026-44020
Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.13.0 until 2.74.0, the USPTO patent XML parser used the standard xml.sax.parseString() without protection against XML External Entity (XXE) attacks. An attacker could craft malicious USPTO patent XML files with external entity references that could read arbitrary files from the server filesystem, perform Server-Side Request Forgery (SSRF) attacks, or cause denial of service through entity expansion (Billion Laughs attack). The vulnerability affects three USPTO patent format parsers: ICE (v4.x), Grant v2.5, and Application v1.x. This vulnerability is fixed in 2.74.0.

🎖@cveNotify

🚨 CVE-2026-49851
Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, Mistune is vulnerable to a CPU exhaustion DoS due to superlinear (approximately O(n²)) behavior in parse_link_text. When parsing Markdown containing many consecutive [ characters, parse_link_text repeatedly scans the input using a regex search inside a loop. Each iteration re-scans a large portion of the remaining string, resulting in quadratic-time behavior. An attacker-controlled Markdown input can therefore trigger excessive CPU usage with a very small payload. This vulnerability is fixed in 3.3.0.

🎖@cveNotify

🚨 CVE-2026-58049
FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption.

🎖@cveNotify

🚨 CVE-2026-13676
fast-uri versions 2.3.1 through 3.1.2 and 4.0.0 fail to canonicalize Unicode (IDN) hostnames for HTTP-family URLs. The IDN conversion path calls a helper that does not exist on the global URL constructor, silently leaving the host in its original Unicode form while normalize() and equal() still return values that differ from a WHATWG-compatible URL parser. Applications that use fast-uri to enforce host-based policy (denylists, loopback filtering, redirect validation, outbound proxy routing) before passing the same URL to Node's URL or fetch can be bypassed when the two implementations resolve the same input to different hosts. Patches: upgrade to fast-uri 3.1.3 for the 3.x line or 4.0.1 for the 4.x line. Workarounds: enforce host policy using the same URL parser used for the actual request, or reject non-ASCII hosts before policy checks.

🎖@cveNotify