🚨 CVE-2026-80722
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate individual TWT params before driver setup
ieee80211_process_rx_twt_action() only partially validates a received
S1G TWT setup frame before queueing it.
An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup()
with twt->length too short for the full struct ieee80211_twt_params.
The individual path passes twt to drv_add_twt_setup(). Both the tracepoint
and the driver callback consume the complete parameters block, not merely
req_type. Do not pass a short individual agreement to the driver.
Broadcast agreements remain unchanged because they are rejected locally
after accessing only req_type.
[edit commit message to not overclaim lack of validation nor
understate driver impact]
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate individual TWT params before driver setup
ieee80211_process_rx_twt_action() only partially validates a received
S1G TWT setup frame before queueing it.
An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup()
with twt->length too short for the full struct ieee80211_twt_params.
The individual path passes twt to drv_add_twt_setup(). Both the tracepoint
and the driver callback consume the complete parameters block, not merely
req_type. Do not pass a short individual agreement to the driver.
Broadcast agreements remain unchanged because they are rejected locally
after accessing only req_type.
[edit commit message to not overclaim lack of validation nor
understate driver impact]
🎖@cveNotify
🚨 CVE-2026-80723
In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: prevent OOB when too many dynamic regions are defined
On boot, fdt_scan_reserved_mem() saves each dynamically-placed
/reserved-memory subnode into a local array of size
MAX_RESERVED_REGIONS.
If the device tree defines more than MAX_RESERVED_REGIONS
dynamically-placed regions, fdt_scan_reserved_mem() writes past the
end of the local array.
Add a bounds check that logs an error and skips the excess regions,
restoring the original behavior.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: prevent OOB when too many dynamic regions are defined
On boot, fdt_scan_reserved_mem() saves each dynamically-placed
/reserved-memory subnode into a local array of size
MAX_RESERVED_REGIONS.
If the device tree defines more than MAX_RESERVED_REGIONS
dynamically-placed regions, fdt_scan_reserved_mem() writes past the
end of the local array.
Add a bounds check that logs an error and skips the excess regions,
restoring the original behavior.
🎖@cveNotify
🚨 CVE-2026-80724
In the Linux kernel, the following vulnerability has been resolved:
ptp: vmclock: prevent read-only mappings from becoming writable
vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock
ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the
page read-only and then upgrade it to writable with mprotect(), after
which the guest can corrupt the host-written timekeeping data (sequence
counter, UTC time, TSC offset) that the vmclock ABI defines as read-only.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 does for its read-only objects and as fixed in drm/vc4
(CVE-2026-68445) and drm/panthor (CVE-2024-53071).
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ptp: vmclock: prevent read-only mappings from becoming writable
vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock
ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the
page read-only and then upgrade it to writable with mprotect(), after
which the guest can corrupt the host-written timekeeping data (sequence
counter, UTC time, TSC offset) that the vmclock ABI defines as read-only.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 does for its read-only objects and as fixed in drm/vc4
(CVE-2026-68445) and drm/panthor (CVE-2024-53071).
🎖@cveNotify
🚨 CVE-2026-82123
Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Tangible Loops & Logic.
🎖@cveNotify
Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Tangible Loops & Logic.
🎖@cveNotify
Tenable®
WordPress Loops & Logic - Reflected XSS
A Reflected Cross-Site Scripting vulnerability exists in the Wordpress plugin '
🚨 CVE-2026-9491
A server-ide request forgery (SSRF) vulnerability in webhook in Synology Chat Server before 2.4.5-22148 allows remote authenticated users to obtain non-sensitive information.
🎖@cveNotify
A server-ide request forgery (SSRF) vulnerability in webhook in Synology Chat Server before 2.4.5-22148 allows remote authenticated users to obtain non-sensitive information.
🎖@cveNotify
Synology
Synology_SA_26_10 | Synology Inc.
Synology Product Security Advisory
🚨 CVE-2026-9548
An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write restricted files and conduct limited denial-of-service attacks in DSM.
🎖@cveNotify
An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write restricted files and conduct limited denial-of-service attacks in DSM.
🎖@cveNotify
Synology
Synology_SA_26_10 | Synology Inc.
Synology Product Security Advisory
🚨 CVE-2026-5097
The wpForo Forum plugin for WordPress is vulnerable to SQL Injection via the 'referer' parameter in all versions up to, and including, 2.4.17. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
🎖@cveNotify
The wpForo Forum plugin for WordPress is vulnerable to SQL Injection via the 'referer' parameter in all versions up to, and including, 2.4.17. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
🎖@cveNotify
🚨 CVE-2026-9491
A server-ide request forgery (SSRF) vulnerability in webhook in Synology Chat Server before 2.4.5-22148 allows remote authenticated users to obtain non-sensitive information.
🎖@cveNotify
A server-ide request forgery (SSRF) vulnerability in webhook in Synology Chat Server before 2.4.5-22148 allows remote authenticated users to obtain non-sensitive information.
🎖@cveNotify
Synology
Synology_SA_26_10 | Synology Inc.
Synology Product Security Advisory
🚨 CVE-2026-9548
An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write restricted files and conduct limited denial-of-service attacks in DSM.
🎖@cveNotify
An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write restricted files and conduct limited denial-of-service attacks in DSM.
🎖@cveNotify
Synology
Synology_SA_26_10 | Synology Inc.
Synology Product Security Advisory
🚨 CVE-2026-18393
A flaw was found in FFmpeg. The tdsc_load_cursor() function writes beyond
the bounds of a heap-allocated buffer when processing crafted TDSC cursor
data. A remote attacker could exploit this by supplying a specially crafted
video file, potentially leading to a denial of service or arbitrary code
execution.
🎖@cveNotify
A flaw was found in FFmpeg. The tdsc_load_cursor() function writes beyond
the bounds of a heap-allocated buffer when processing crafted TDSC cursor
data. A remote attacker could exploit this by supplying a specially crafted
video file, potentially leading to a denial of service or arbitrary code
execution.
🎖@cveNotify
Redhat
CVE-2026-18393 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-18918
In Eclipse Lyo versions 2.0.0 to 7.0.0, OAuth server authorization checks can be bypassed when the 2-legged auth is supported by the server. In those cases, application that based their authz filters upon Lyo-provided `AbstractAdapterCredentialsFilter`, are vulnerable. An attacked can create a provisional trusted client (valid use-case) but then it can be used as a trusted client immediately without requiring the administrator approval to clear the provisional status. The 3-legged path requiring user interaction is not vulnerable and rejects provisional clients.
🎖@cveNotify
In Eclipse Lyo versions 2.0.0 to 7.0.0, OAuth server authorization checks can be bypassed when the 2-legged auth is supported by the server. In those cases, application that based their authz filters upon Lyo-provided `AbstractAdapterCredentialsFilter`, are vulnerable. An attacked can create a provisional trusted client (valid use-case) but then it can be used as a trusted client immediately without requiring the administrator approval to clear the provisional status. The 3-legged path requiring user interaction is not vulnerable and rejects provisional clients.
🎖@cveNotify
GitHub
Release v6.0.1.Final security release · eclipse-lyo/lyo
Security
CVE-2026-18918 A vulnerability was discovered in Eclipse Lyo 6.0.0 and earlier versions, where the AbstractAdapterCredentialsFilter could be misused to bypass authentication when used in ...
CVE-2026-18918 A vulnerability was discovered in Eclipse Lyo 6.0.0 and earlier versions, where the AbstractAdapterCredentialsFilter could be misused to bypass authentication when used in ...
🚨 CVE-2026-27852
An attacker that can send mail to a user can craft a message whose headers contain a very large number of email addresses or MIME parameters, which causes excessive memory usage when the message is later parsed. The message is still delivered, but reading it over IMAP can exhaust the memory limit of the process and terminate it, causing denial of service for the affected user. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that can send mail to a user can craft a message whose headers contain a very large number of email addresses or MIME parameters, which causes excessive memory usage when the message is later parsed. The message is still delivered, but reading it over IMAP can exhaust the memory limit of the process and terminate it, causing denial of service for the affected user. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-33263
When mail_max_userip_connections is set (default 10) and reached, submission-login can crash with epoll() panic caused by file descriptor handling issues. If running in high-security mode (default for community releases), only the new submission connection gets terminated. If running in high-performance mode (default for Pro releases), all connections handled by the submission-login process will be terminated. The crashes can cause failure for user to send a message, or it can cause duplicate messages to be sent. If TLS is not used (in the backend server processing the submission), duplicate deliveries cannot happen, because the crash can only happen at AUTH stage. Limit the number of connections handled by single submission-login process. This has a performance impact though. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
When mail_max_userip_connections is set (default 10) and reached, submission-login can crash with epoll() panic caused by file descriptor handling issues. If running in high-security mode (default for community releases), only the new submission connection gets terminated. If running in high-performance mode (default for Pro releases), all connections handled by the submission-login process will be terminated. The crashes can cause failure for user to send a message, or it can cause duplicate messages to be sent. If TLS is not used (in the backend server processing the submission), duplicate deliveries cannot happen, because the crash can only happen at AUTH stage. Limit the number of connections handled by single submission-login process. This has a performance impact though. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-33604
An attacker that can get Dovecot to relay a message, for example through Sieve redirect or submission relay, can use a crafted line ending in the message body to bypass the outbound protection that prevents message content from being interpreted as SMTP commands. A downstream mail server that hasn't yet fixed the SMTP smuggling vulnerability can be tricked into treating part of the message body as new SMTP commands, allowing injection of spoofed email. This is the same vulnerability class as CVE-2023-51764 and CVE-2023-51766. Where you control the receiving mail servers, ensure they reject bare carriage returns in message data. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that can get Dovecot to relay a message, for example through Sieve redirect or submission relay, can use a crafted line ending in the message body to bypass the outbound protection that prevents message content from being interpreted as SMTP commands. A downstream mail server that hasn't yet fixed the SMTP smuggling vulnerability can be tricked into treating part of the message body as new SMTP commands, allowing injection of spoofed email. This is the same vulnerability class as CVE-2023-51764 and CVE-2023-51766. Where you control the receiving mail servers, ensure they reject bare carriage returns in message data. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-33605
An unauthenticated attacker can crash the ManageSieve login process by sending a small malformed command before authenticating. If running in high-security mode (default for community releases), only the attacker's own connection is terminated. If running in high-performance mode (default for Pro releases), all connections handled by the same managesieve-login process are terminated. Repeating the attack can cause denial of service for Sieve script management. Restrict network access to the ManageSieve service to trusted clients. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An unauthenticated attacker can crash the ManageSieve login process by sending a small malformed command before authenticating. If running in high-security mode (default for community releases), only the attacker's own connection is terminated. If running in high-performance mode (default for Pro releases), all connections handled by the same managesieve-login process are terminated. Repeating the attack can cause denial of service for Sieve script management. Restrict network access to the ManageSieve service to trusted clients. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-33606
Mail content stored by a user can be crafted so that it is interpreted as dsync protocol commands when an administrator later runs dsync with the stream protocol, for example during a migration. Injected commands can modify mailbox state on the destination during migration or replication, including internal mailbox attributes that a user should not be able to set directly. It can also cause dsync errors. Avoid running dsync with the stream protocol on mailboxes with untrusted content. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
Mail content stored by a user can be crafted so that it is interpreted as dsync protocol commands when an administrator later runs dsync with the stream protocol, for example during a migration. Injected commands can modify mailbox state on the destination during migration or replication, including internal mailbox attributes that a user should not be able to set directly. It can also cause dsync errors. Avoid running dsync with the stream protocol on mailboxes with untrusted content. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-33607
An attacker that has valid credentials can use IMAP LIST command to consume CPU. This can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage and kill the offending process and lock account. Alternatively install fixed version. No publicly available exploits are known.
🎖@cveNotify
An attacker that has valid credentials can use IMAP LIST command to consume CPU. This can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage and kill the offending process and lock account. Alternatively install fixed version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-40013
An attacker that has valid credentials can submit a Sieve script containing an extreme numeric literal, which causes an out-of-bounds write when the ManageSieve service compiles the script. This causes memory corruption and an observed crash of the ManageSieve process, resulting in denial of service for script management. This might be able to be used for remote code execution. Disable the ManageSieve service if users do not need remote Sieve script management. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that has valid credentials can submit a Sieve script containing an extreme numeric literal, which causes an out-of-bounds write when the ManageSieve service compiles the script. This causes memory corruption and an observed crash of the ManageSieve process, resulting in denial of service for script management. This might be able to be used for remote code execution. Disable the ManageSieve service if users do not need remote Sieve script management. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-40014
An attacker that can send mail to a user can craft a message header that makes the IMAP THREAD command consume CPU disproportionate to the size of the message. When a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that can send mail to a user can craft a message header that makes the IMAP THREAD command consume CPU disproportionate to the size of the message. When a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-40015
An attacker that has valid credentials can open many connections to the imap-hibernate service and send invalid commands, which can intermittently cause an out-of-bounds read and crash the process. The crash interrupts hibernated IMAP sessions handled by the affected process, which can cause degradation of service for IMAP. Disable IMAP hibernation. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that has valid credentials can open many connections to the imap-hibernate service and send invalid commands, which can intermittently cause an out-of-bounds read and crash the process. The crash interrupts hibernated IMAP sessions handled by the affected process, which can cause degradation of service for IMAP. Disable IMAP hibernation. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
🚨 CVE-2026-40017
An attacker that can send mail to a user can craft a message header whose values are chosen to collide in an internal hash table, which makes the IMAP THREAD command consume CPU disproportionate to the size of the message. This is a separate issue from CVE-2026-40014 and is not addressed by that fix. Whenever a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify
An attacker that can send mail to a user can craft a message header whose values are chosen to collide in an internal hash table, which makes the IMAP THREAD command consume CPU disproportionate to the size of the message. This is a separate issue from CVE-2026-40014 and is not addressed by that fix. Whenever a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known.
🎖@cveNotify