🚨 CVE-2026-46170
In the Linux kernel, the following vulnerability has been resolved:

mptcp: pm: ADD_ADDR rtx: free sk if last

When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(),
and released at the end.

If at that moment, it was the last reference being held, the sk would
not be freed. sock_put() should then be called instead of __sock_put().

But that's not enough: if it is the last reference, sock_put() will call
sk_free(), which will end up calling sk_stop_timer_sync() on the same
timer, and waiting indefinitely to finish. So it is needed to mark that
the timer is done at the end of the timer handler when it has not been
rescheduled, not to call sk_stop_timer_sync() on "itself".

🎖@cveNotify

🚨 CVE-2026-42965
A flaw was found in the OpenShift Router. A user with EndpointSlice write access can exploit this vulnerability by creating a Service backed by an FQDN (Fully Qualified Domain Name) EndpointSlice that resolves to a cloud metadata endpoint. This allows the router to proxy requests to the cloud metadata endpoint, leading to the disclosure of instance credentials and other sensitive metadata. This bypasses previous security measures for validating IP addresses.

🎖@cveNotify

🚨 CVE-2026-46384
iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, several Avro decoder paths read attacker-controlled 64-bit values from the wire format and either narrowed them to platform-sized int before bounds-checking, or summed them with overflow-prone signed-int arithmetic. On 32-bit targets (GOARCH=386, arm, mips, wasm, etc.), the truncation paths can silently bypass byte-slice limits, select the wrong union branch, or hit the OCF negative-make panic via wrap. Three sub-issues are not 32-bit-specific: cumulative-size arithmetic overflow in arrayDecoder.Decode / mapDecoder.Decode / mapDecoderUnmarshaler.Decode (wraps at math.MaxInt64 on amd64 / arm64 and bypasses MaxSliceAllocSize / MaxMapAllocSize), math.MinInt negation in block-header handling, and make([]byte, size) with a negative size in OCF block reads — all three panic or bypass caps on any platform, giving an attacker a denial-of-service primitive there. This vulnerability is fixed in 2.33.0.

🎖@cveNotify

🚨 CVE-2026-46385
iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, the Avro array and map decoders looped over an attacker-controlled block-count value without checking the underlying reader's error state inside the loop body. Reader.ReadBlockHeader returns the count as a Go int, which is 64-bit on amd64 / arm64 targets — so a producer can declare a block of up to math.MaxInt64 (~9.2 × 10¹⁸) elements followed by EOF (or any truncated payload), and the decoder will attempt that many no-op iterations before propagating the error. The realistic ceiling is "indefinite until the worker is killed externally" — a single hostile payload pins a CPU core until the process is OOM-killed, deadline-cancelled, or terminated. Remote, unauthenticated denial-of-service. This vulnerability is fixed in 2.33.0.

🎖@cveNotify

🚨 CVE-2026-44393
An issue was discovered in OpenStack oslo.messaging 1.0.0 through 17.3.0. The oslo.messaging RabbitMQ driver does not perform TLS hostname verification when connecting to the message broker. When ssl_ca_file is configured, the driver enables certificate chain validation but does not pass the expected broker hostname into the underlying TLS stack. Any certificate signed by the deployment CA is accepted regardless of hostname, allowing an attacker who can intercept control-plane traffic to impersonate the RabbitMQ broker and perform a man-in-the-middle attack on RPC and notification traffic. All OpenStack services using oslo.messaging with RabbitMQ over TLS are affected.

🎖@cveNotify

🚨 CVE-2026-34355
A buffer overflow in mod_proxy_html in Apache HTTP Server 2.4.67 and earlier allows an attack by an untrusted backend.
Users are recommended to upgrade to version 2.4.68, which fixes this issue.

🎖@cveNotify

🚨 CVE-2026-42536
Heap-based Buffer Overflow vulnerability in Apache HTTP Server with mod_xml2enc, xml2StartParse, and untrusted content

This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.

Users are recommended to upgrade to version 2.4.68, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-44185
Buffer Over-read vulnerability in Apache HTTP Server via outbound OCSP requests to an attacker controlled OCSP server

This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.

Users are recommended to upgrade to version 2.4.68, which fixes the issue.

🎖@cveNotify

🚨 CVE-2025-10263
Arm C1-Ultra, C1-Premium, Neoverse V3 & V3AE, Neoverse V2, Neoverse V1, Neoverse-N2, Neoverse-N1, Cortex-X925, Cortex-X4, Cortex-X3, Cortex-X2, Cortex-X1 & X1C, Cortex-A710, Cortex-A78, A78AE & A78C, Cortex-A77, Cortex-A76 & A76A may allow writes to resources owned by a higher exception level.

🎖@cveNotify

🚨 CVE-2026-53435
In Jenkins 2.567 and earlier, LTS 2.555.2 and earlier, it is possible for attackers to have Jenkins deserialize arbitrary types defined in Jenkins core or plugins from an attacker-controlled `config.xml` submission in a way that allows them to handle HTTP requests afterwards.
This can be used to impersonate any user and send HTTP requests on their behalf, up to and including use of the Script Console to run arbitrary code, or to read arbitrary files from the Jenkins controller.

🎖@cveNotify

🚨 CVE-2026-53437
Jenkins 2.567 and earlier, LTS 2.555.2 and earlier improperly determines that a redirect URL after login is legitimately pointing to Jenkins when it contains tab or newline characters between `//`, allowing attackers to perform phishing attacks.

🎖@cveNotify

🚨 CVE-2026-12143
form-data is a library for creating readable multipart/form-data streams. In versions through 4.0.5, the `field` argument to `FormData#append` and the `filename` option are concatenated verbatim into the `Content-Disposition` header without escaping carriage return (CR), line feed (LF), or double-quote (") characters. An application that passes attacker-controlled data as a field name or filename (for example, an API gateway that turns JSON object keys into multipart field names) allows the attacker to terminate the header line and inject additional headers, or to smuggle entire additional multipart parts, into the request the application forwards to a backend. This can let the attacker add or override form fields (e.g. set `is_admin=true`) seen by the downstream parser. This is an instance of CWE-93 (CRLF injection). The fix escapes CR, LF, and `"` as `%0D`, `%0A`, and `%22` in field names and filenames, matching the serialization browsers use per the WHATWG HTML multipart/form-data encoding algorithm. Exploitation requires the consuming application to use untrusted input as a field name or filename; applications that use only fixed/trusted field names are not affected. Fixed in 2.5.6, 3.0.5, and 4.0.6.

🎖@cveNotify

🚨 CVE-2026-44990
ApostropheCMS is an open-source Node.js content management system, and sanitize-html provides a simple HTML sanitizer with a clear API. Under the default configuration, versions of `sanitize-html` prior to 2.17.4 can turn attacker-controlled content inside a disallowed `xmp` element into live HTML or JavaScript. This is a sanitizer bypass in the default `disallowedTagsMode: 'discard'` path and can lead to stored XSS in applications that render sanitized output back to users. Version 2.17.4 patches the issue.

🎖@cveNotify

🚨 CVE-2026-52923
In the Linux kernel, the following vulnerability has been resolved:

ipc: limit next_id allocation to the valid ID range

The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.

If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.

The bug is in ipc_idr_alloc() in the checkpoint/restore path.

1. ids->next_id is passed to:

idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)

2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.

3. The new object id is still encoded with the narrower SysV IPC index
width:

new->id = (new->seq << ipcmni_seq_shift()) + idx

4. Later removal goes through ipc_rmid(), which uses:

ipcid_to_idx(ipcp->id)

That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.

5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.

6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.

Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted.

🎖@cveNotify

🚨 CVE-2026-57281
Jenkins Script Security Plugin 1402.v94c9ce464861 and earlier does not reject Groovy AST transformation annotations carrying an extensions member, allowing attackers able to run sandboxed Groovy scripts to execute code outside the sandbox if a suitable script is present on the classpath of the component that evaluates the script.

🎖@cveNotify

🚨 CVE-2026-41992
GNU gzip contains a global buffer overflow vulnerability in the LZH decompression logic caused by improper reuse of shared global state between different decompression formats within a single execution. GNU gzip maintains a global array that is shared across the LZ77, LZW, and LZH decompression routines and is not reinitialized between files processed in the same invocation.
By decompressing a specially crafted LZW file followed by a specially crafted LZH file in a single gzip -d command, an attacker can poison the shared global state and subsequently trigger an out‑of‑bounds read in the LZH decoder. The LZH decompression logic follows stale values left in the shared array, causing reads past the end of the allocated global buffer.

This issue has been fixed in commits 63dbf6b3b9e6e781df1a6a64e609b10e23969681 and e7378c2d421be6a286922374425680bbe9ad8b7d.

🎖@cveNotify

🚨 CVE-2026-13676
fast-uri versions 2.3.1 through 3.1.2 and 4.0.0 fail to canonicalize Unicode (IDN) hostnames for HTTP-family URLs. The IDN conversion path calls a helper that does not exist on the global URL constructor, silently leaving the host in its original Unicode form while normalize() and equal() still return values that differ from a WHATWG-compatible URL parser. Applications that use fast-uri to enforce host-based policy (denylists, loopback filtering, redirect validation, outbound proxy routing) before passing the same URL to Node's URL or fetch can be bypassed when the two implementations resolve the same input to different hosts. Patches: upgrade to fast-uri 3.1.3 for the 3.x line or 4.0.1 for the 4.x line. Workarounds: enforce host policy using the same URL parser used for the actual request, or reject non-ASCII hosts before policy checks.

🎖@cveNotify

🚨 CVE-2026-54371
attr before version 2.6.0 contains a symlink traversal vulnerability in the getfattr and setfattr utilities that allows local attackers to escalate privileges by replacing a pathname component with a symbolic link during directory hierarchy traversal. Attackers who control a pathname component can redirect getfattr and setfattr operations to arbitrary files by substituting a symlink, leading to local privilege escalation when getfattr or setfattr is invoked by a privileged process over an attacker-controlled path.

🎖@cveNotify

🚨 CVE-2026-64216
In the Linux kernel, the following vulnerability has been resolved:

netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages()

netfs_unlock_abandoned_read_pages(rreq) accesses the index of the folios it
is wanting to unlock and compares that to rreq->no_unlock_folio so that it
doesn't unlock a folio being read for netfs_perform_write() or
netfs_write_begin().

However, given that netfs_unlock_abandoned_read_pages() is called _after_
NETFS_RREQ_IN_PROGRESS is cleared, the one folio that it's not allowed to
dereference is the one specified by ->no_unlock_folio as ownership
immediately reverts to the caller.

Fix this by storing the folio pointer instead and using that rather than
the index. Also fix netfs_unlock_read_folio() where the same applies.

🎖@cveNotify

🚨 CVE-2026-64561
In the Linux kernel, the following vulnerability has been resolved:

KVM: x86: Check for invalid/obsolete root *after* making MMU pages available

Check for a "stale" page fault, i.e. for an invalid and/or obsolete root,
after making MMU pages available for the shadow MMU. If reclaiming shadow
pages zaps an in-use root, i.e. marks it invalid, then KVM will attempt to
map memory into an invalid root. On its own, populating an invalid root is
"fine", but because child shadow pages inherit their parent's role, any
children created during the map/fetch will be created as invalid pages,
thus violating KVM's invariant that invalid pages are never on the list of
active MMU pages.

Note, the underlying flaw has existed since KVM first started tracking
invalid roots in 2008 (commit 2e53d63acba7, "KVM: MMU: ignore zapped root
pagetables"), but the true badness only came along in 2020 (Linux 5.9)
with the invariant that invalid shadow pages can't be on the list of
active pages.

Note #2, inheriting role.invalid when creating child shadow pages is also
far from ideal; that flaw will be addressed separately.

🎖@cveNotify

🚨 CVE-2026-64581
In the Linux kernel, the following vulnerability has been resolved:

xfrm: fix sk_dst_cache double-free in xfrm_user_policy()

xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(),
i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with
rcu_dereference_protected(), stores NULL and dst_release()s the old dst.
That is only safe if no other thread modifies sk_dst_cache concurrently.

For a connected UDP socket that does not hold: the transmit fast path
(udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly
with an atomic xchg(). A per-socket policy change racing a send can make
both sides observe the same old dst and each dst_release() it, dropping
the socket's single reference twice and freeing the xfrm_dst bundle while
it is still referenced:

BUG: KASAN: slab-use-after-free in dst_release
Write of size 4 at addr ffff88801897b6c0 by task exploit/155
Call Trace:
...
dst_release (... ./include/linux/rcuref.h:109)
xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053)
do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347)
ip_setsockopt (net/ipv4/ip_sockglue.c:1417)
do_sock_setsockopt (net/socket.c:2368)
__sys_setsockopt (net/socket.c:2393)
__x64_sys_setsockopt (net/socket.c:2396)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)

Reachable by an unprivileged user via a user+network namespace.

Use the atomic sk_dst_reset() so the cache is cleared and released with a
single xchg(): whichever side wins releases the dst once, the other sees
NULL and does nothing. Behaviour is otherwise unchanged.

🎖@cveNotify