🚨 CVE-2026-17028
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition undergoing iSCSI SAN network boot can prevent that partition from completing its boot sequence. Other partitions and the managed system are not affected. Only partitions actively performing an iSCSI SAN network boot are affected, resulting in an availability impact.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition undergoing iSCSI SAN network boot can prevent that partition from completing its boot sequence. Other partitions and the managed system are not affected. Only partitions actively performing an iSCSI SAN network boot are affected, resulting in an availability impact.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17028
Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition undergoing iSCSI SAN network boot can prevent that partition from completing its boot…
🚨 CVE-2026-17091
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call to inject an arbitrary amount of data into hypervisor or partition memory, resulting in either a crash causing a full platform re-IPL and terminating all hosted partitions, or corruption of hypervisor or partition memory. The PowerVM hypervisor will restart automatically; however, repeated exploitation could result in a sustained availability impact. Successful exploitation results in an integrity and availability impact to the managed system.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call to inject an arbitrary amount of data into hypervisor or partition memory, resulting in either a crash causing a full platform re-IPL and terminating all hosted partitions, or corruption of hypervisor or partition memory. The PowerVM hypervisor will restart automatically; however, repeated exploitation could result in a sustained availability impact. Successful exploitation results in an integrity and availability impact to the managed system.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17091
Power Systems Firmware is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call to inject an arbitrary amount of data into hypervisor or partition…
🚨 CVE-2026-17097
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive, requiring a full platform re-IPL to restore normal operation. In some cases this may also cause the guest to inject a small amount of data into hypervisor or partition memory with no attacker control over the target location. Successful exploitation results in an integrity and availability impact to the managed system.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive, requiring a full platform re-IPL to restore normal operation. In some cases this may also cause the guest to inject a small amount of data into hypervisor or partition memory with no attacker control over the target location. Successful exploitation results in an integrity and availability impact to the managed system.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17097
Power Systems Firmware is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive…
🚨 CVE-2026-17414
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition performing a network boot can prevent that partition from completing its boot sequence. On partitions where OS secure boot is not enabled, which is the default configuration, the attacker can also substitute the boot image, compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition performing a network boot can prevent that partition from completing its boot sequence. On partitions where OS secure boot is not enabled, which is the default configuration, the attacker can also substitute the boot image, compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17414
Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition performing a network boot can prevent that partition from completing its boot sequence.…
🚨 CVE-2026-18821
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker on the same network as a partition undergoing network boot can send a malformed packet, allowing arbitrary code to be executed in the partition firmware and compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker on the same network as a partition undergoing network boot can send a malformed packet, allowing arbitrary code to be executed in the partition firmware and compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-18821
Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker on the same network as a partition undergoing network boot can send a malformed packet, allowing arbitrary code to be executed in…
🚨 CVE-2026-18871
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in host firmware configuration parsing. An attacker with authenticated service-level access to the service processor can write specially crafted configuration data, causing the host firmware boot stack to crash with possible memory corruption during system initialisation, resulting in an integrity and availability impact to the managed system.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in host firmware configuration parsing. An attacker with authenticated service-level access to the service processor can write specially crafted configuration data, causing the host firmware boot stack to crash with possible memory corruption during system initialisation, resulting in an integrity and availability impact to the managed system.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-18871
Power Systems Firmware is affected by a vulnerability in host firmware configuration parsing. An attacker with authenticated service-level access to the service processor can write specially crafted configuration data, causing the host firmware boot stack…
🚨 CVE-2026-4936
IBM PowerVM Hypervisor Platform KeyStore (PKS) and virtual TPM FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 use persistent storage key seeds that result in an AES key with reduced strength. An attacker with access to the service processor or HMC could exploit this weakness to derive the encryption key and access the data.
🎖@cveNotify
IBM PowerVM Hypervisor Platform KeyStore (PKS) and virtual TPM FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 use persistent storage key seeds that result in an AES key with reduced strength. An attacker with access to the service processor or HMC could exploit this weakness to derive the encryption key and access the data.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-4936
PowerVM Platform KeyStore (PKS) and virtual TPM use persistent storage key seeds that result in an AES key with reduced strength. An attacker with access to the service processor or HMC could exploit this weakness to derive the encryption key and access the…
🚨 CVE-2026-4937
IBM PowerVM Hypervisor FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 could allow a local attacker with administrative privileges to decrypt encrypted data due to certain hypervisor calls utilizing less entropy than requested.
🎖@cveNotify
IBM PowerVM Hypervisor FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 could allow a local attacker with administrative privileges to decrypt encrypted data due to certain hypervisor calls utilizing less entropy than requested.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-4937
PowerVM could allow a local attacker with administrative privileges to decrypt encrypted data due to certain hypervisor calls utilizing less entropy than requested.
🚨 CVE-2026-19449
IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 has a vulnerability in cmdnim that may allow an unprivileged local user to executes the payload as root.
🎖@cveNotify
IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 has a vulnerability in cmdnim that may allow an unprivileged local user to executes the payload as root.
🎖@cveNotify
Ibm
Security Bulletin: Vulnerabilities in IBM AIX and PowerVM VIOS
Updated Aug 21, 2026: Updated the summary to highlight the additional installation instructions. IBM is providing security updates for supported AIX and VIOS releases that are under active fix support. Delivered through Service Packs (SPs) and Fix Packs (FPs)…
🚨 CVE-2026-6844
A flaw was found in the `readelf` utility of the binutils package. A local attacker could exploit two Denial of Service (DoS) vulnerabilities by providing a specially crafted Executable and Linkable Format (ELF) file. One vulnerability, a resource exhaustion (CWE-400), can lead to an out-of-memory condition. The other, a null pointer dereference (CWE-476), can cause a segmentation fault. Both issues can result in the `readelf` utility becoming unresponsive or crashing, leading to a denial of service.
🎖@cveNotify
A flaw was found in the `readelf` utility of the binutils package. A local attacker could exploit two Denial of Service (DoS) vulnerabilities by providing a specially crafted Executable and Linkable Format (ELF) file. One vulnerability, a resource exhaustion (CWE-400), can lead to an out-of-memory condition. The other, a null pointer dereference (CWE-476), can cause a segmentation fault. Both issues can result in the `readelf` utility becoming unresponsive or crashing, leading to a denial of service.
🎖@cveNotify
Redhat
CVE-2026-6844 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-16313
A flaw was found in sg3_utils. The sg_inq command, when invoked with the --export option, outputs device identification data without sanitizing control characters in SCSI name string fields. A newline character embedded in a device-supplied name string can inject arbitrary properties into the udev device database. This could allow an attacker who can present a crafted SCSI device to execute arbitrary commands as root when the device is disconnected.
🎖@cveNotify
A flaw was found in sg3_utils. The sg_inq command, when invoked with the --export option, outputs device identification data without sanitizing control characters in SCSI name string fields. A newline character embedded in a device-supplied name string can inject arbitrary properties into the udev device database. This could allow an attacker who can present a crafted SCSI device to execute arbitrary commands as root when the device is disconnected.
🎖@cveNotify
🚨 CVE-2026-12339
A Zip Slip vulnerability in the WebUI ISP
Upgrade functionality allows arbitrary file write via a crafted archive
containing directory traversal sequences. An authenticated administrator may
overwrite arbitrary files on the system.Successful
exploitation may allow arbitrary file to overwrite on the underlying system, affecting system integrity and availability.
🎖@cveNotify
A Zip Slip vulnerability in the WebUI ISP
Upgrade functionality allows arbitrary file write via a crafted archive
containing directory traversal sequences. An authenticated administrator may
overwrite arbitrary files on the system.Successful
exploitation may allow arbitrary file to overwrite on the underlying system, affecting system integrity and availability.
🎖@cveNotify
TP-Link
Download for Archer MR200 | TP-Link
TP Link - Download Center Detail
🚨 CVE-2026-59130
No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally.
🎖@cveNotify
No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally.
🎖@cveNotify
🚨 CVE-2026-59131
No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally.
🎖@cveNotify
No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally.
🎖@cveNotify
🚨 CVE-2026-73268
A flaw was found in the cluster-curator-controller component of multicluster engine (MCE). A tenant with create or update permissions on ClusterCurator resources can inject an arbitrary Job specification. This is possible because the CreateJob() function does not validate user-controlled input when unmarshaling the spec.install.overrideJob raw extension. Successful exploitation allows the injected Job to run with the controller's elevated privileges, leading to arbitrary code execution and privilege escalation, potentially accessing cluster-wide secrets.
🎖@cveNotify
A flaw was found in the cluster-curator-controller component of multicluster engine (MCE). A tenant with create or update permissions on ClusterCurator resources can inject an arbitrary Job specification. This is possible because the CreateJob() function does not validate user-controlled input when unmarshaling the spec.install.overrideJob raw extension. Successful exploitation allows the injected Job to run with the controller's elevated privileges, leading to arbitrary code execution and privilege escalation, potentially accessing cluster-wide secrets.
🎖@cveNotify
🚨 CVE-2026-73269
A flaw was found in the cluster-curator-controller component. A local user, by creating a ClusterCurator resource with a specific naming convention, can trigger the creation of a cluster-scoped ClusterRoleBinding. This allows the user to escalate their privileges from namespace-local access to cluster-wide control. This privilege escalation grants broad permissions, including the ability to access and manipulate secrets, manage cluster actions, and delete hosted clusters or node pools.
🎖@cveNotify
A flaw was found in the cluster-curator-controller component. A local user, by creating a ClusterCurator resource with a specific naming convention, can trigger the creation of a cluster-scoped ClusterRoleBinding. This allows the user to escalate their privileges from namespace-local access to cluster-wide control. This privilege escalation grants broad permissions, including the ability to access and manipulate secrets, manage cluster actions, and delete hosted clusters or node pools.
🎖@cveNotify
🚨 CVE-2026-19130
A flaw was found in the provider-credential-controller component of multicluster-engine (MCE). An attacker with specific permissions on the hub cluster, and knowledge of a prior credential value, could exploit an authorization bypass vulnerability. By manipulating `copiedFrom` labels, the attacker could intercept newly rotated provider credentials, leading to unauthorized information disclosure. This allows access to sensitive credentials that should otherwise be protected.
🎖@cveNotify
A flaw was found in the provider-credential-controller component of multicluster-engine (MCE). An attacker with specific permissions on the hub cluster, and knowledge of a prior credential value, could exploit an authorization bypass vulnerability. By manipulating `copiedFrom` labels, the attacker could intercept newly rotated provider credentials, leading to unauthorized information disclosure. This allows access to sensitive credentials that should otherwise be protected.
🎖@cveNotify
🚨 CVE-2026-73266
A flaw was found in the clusterclaims-controller component of Multicluster Engine (MCE). An authenticated tenant can exploit this vulnerability by manipulating ClusterClaim labels. This allows the tenant to force a cluster to join a ManagedClusterSet belonging to another tenant. Such unauthorized access could enable the injection of policies and workloads into other tenants' clusters.
🎖@cveNotify
A flaw was found in the clusterclaims-controller component of Multicluster Engine (MCE). An authenticated tenant can exploit this vulnerability by manipulating ClusterClaim labels. This allows the tenant to force a cluster to join a ManagedClusterSet belonging to another tenant. Such unauthorized access could enable the injection of policies and workloads into other tenants' clusters.
🎖@cveNotify
🚨 CVE-2026-66795
A flaw was found in the managedcluster-import-controller. The Certificate Signing Request (CSR) auto-approval logic improperly validates incoming CSRs, specifically by not inspecting the signer name or decoding the PEM-encoded x509 CSR. This vulnerability allows a privileged service account on a spoke cluster to submit a malicious CSR. Successful exploitation can lead to privilege escalation, enabling the attacker to obtain administrative credentials on the hub cluster.
🎖@cveNotify
A flaw was found in the managedcluster-import-controller. The Certificate Signing Request (CSR) auto-approval logic improperly validates incoming CSRs, specifically by not inspecting the signer name or decoding the PEM-encoded x509 CSR. This vulnerability allows a privileged service account on a spoke cluster to submit a malicious CSR. Successful exploitation can lead to privilege escalation, enabling the attacker to obtain administrative credentials on the hub cluster.
🎖@cveNotify
🚨 CVE-2026-66794
A flaw was found in the `cluster-proxy-addon` component of Multicluster Engine for Kubernetes. This vulnerability allows an unauthenticated attacker, who can access the user-facing route, to bypass authentication and authorization checks. By manipulating URL path segments, the attacker can proxy requests to arbitrary services across any managed cluster. This enables unauthorized access to internal services that would otherwise be protected, potentially leading to information disclosure or further compromise of the cluster environment.
🎖@cveNotify
A flaw was found in the `cluster-proxy-addon` component of Multicluster Engine for Kubernetes. This vulnerability allows an unauthenticated attacker, who can access the user-facing route, to bypass authentication and authorization checks. By manipulating URL path segments, the attacker can proxy requests to arbitrary services across any managed cluster. This enables unauthorized access to internal services that would otherwise be protected, potentially leading to information disclosure or further compromise of the cluster environment.
🎖@cveNotify
🚨 CVE-2026-73267
A flaw was found in the clusterclaims-controller component of multicluster engine (MCE). A tenant with standard permissions to create and delete ClusterClaim resources can exploit this by manipulating the `spec.namespace` field. This allows the tenant to specify and delete any ManagedCluster, including the hub's local-cluster or other tenants' clusters, due to a missing ownership check. This vulnerability can lead to a denial of service by enabling unauthorized deletion of ManagedClusters.
🎖@cveNotify
A flaw was found in the clusterclaims-controller component of multicluster engine (MCE). A tenant with standard permissions to create and delete ClusterClaim resources can exploit this by manipulating the `spec.namespace` field. This allows the tenant to specify and delete any ManagedCluster, including the hub's local-cluster or other tenants' clusters, due to a missing ownership check. This vulnerability can lead to a denial of service by enabling unauthorized deletion of ManagedClusters.
🎖@cveNotify