🚨 CVE-2026-17093
IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 - OP940.81 (Power HMC) is affected by a vulnerability in host firmware configuration parsing. An attacker with service-level access to the BMC/FSP can supply specially crafted configuration data, compromising the host firmware boot stage and everything subsequently loaded by it, resulting in a confidentiality, integrity, and availability impact to the managed system.
🎖@cveNotify
IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 - OP940.81 (Power HMC) is affected by a vulnerability in host firmware configuration parsing. An attacker with service-level access to the BMC/FSP can supply specially crafted configuration data, compromising the host firmware boot stage and everything subsequently loaded by it, resulting in a confidentiality, integrity, and availability impact to the managed system.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17093
Power Systems Firmware is affected by a vulnerability in host firmware configuration parsing. An attacker with service-level access to the BMC/FSP can supply specially crafted configuration data, compromising the host firmware boot stage and everything subsequently…
🚨 CVE-2026-17100
Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1, and OP940.00 - OP940.81 is affected by a vulnerability in the service processor mailbox interface. An attacker with authenticated service-level access to the BMC/FSP can exploit this vulnerability, allowing arbitrary code to be executed in the host firmware runtime, giving full control over the managed system, resulting in a confidentiality, integrity, and availability impact to the managed system.
🎖@cveNotify
Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1, and OP940.00 - OP940.81 is affected by a vulnerability in the service processor mailbox interface. An attacker with authenticated service-level access to the BMC/FSP can exploit this vulnerability, allowing arbitrary code to be executed in the host firmware runtime, giving full control over the managed system, resulting in a confidentiality, integrity, and availability impact to the managed system.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17100
Power Systems Firmware is affected by a vulnerability in the service processor mailbox interface. An attacker with authenticated service-level access to the BMC/FSP can exploit this vulnerability, allowing arbitrary code to be executed in the host firmware…
🚨 CVE-2026-17429
IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 - OP940.81 (Power HMC) is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can write arbitrary data to hardware control registers, allowing full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 - OP940.81 (Power HMC) is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can write arbitrary data to hardware control registers, allowing full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17429
Power Systems Firmware is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can write arbitrary data to hardware control registers, allowing full control over…
🚨 CVE-2026-17494
IBM Power Systems Firmware FW1120.00, and FW1110.00 through FW1110.30 is affected by a vulnerability in the interface between the BMC and the host system. An attacker with service access to the BMC can send a specially crafted command, allowing arbitrary code to be executed on the host system, giving full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
IBM Power Systems Firmware FW1120.00, and FW1110.00 through FW1110.30 is affected by a vulnerability in the interface between the BMC and the host system. An attacker with service access to the BMC can send a specially crafted command, allowing arbitrary code to be executed on the host system, giving full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17494
Power Systems Firmware is affected by a vulnerability in the interface between the BMC and the host system. An attacker with service access to the BMC can send a specially crafted command, allowing arbitrary code to be executed on the host system, giving…
🚨 CVE-2026-18681
IBM Server Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the FSP firmware update process. An attacker with authenticated administrator-level access to the FSP can, under specific conditions, execute arbitrary code, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
IBM Server Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the FSP firmware update process. An attacker with authenticated administrator-level access to the FSP can, under specific conditions, execute arbitrary code, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-18681
Power Systems Firmware is affected by a vulnerability in the FSP firmware update process. An attacker with authenticated administrator-level access to the FSP can, under specific conditions, execute arbitrary code, resulting in a confidentiality, integrity…
🚨 CVE-2026-17028
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition undergoing iSCSI SAN network boot can prevent that partition from completing its boot sequence. Other partitions and the managed system are not affected. Only partitions actively performing an iSCSI SAN network boot are affected, resulting in an availability impact.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition undergoing iSCSI SAN network boot can prevent that partition from completing its boot sequence. Other partitions and the managed system are not affected. Only partitions actively performing an iSCSI SAN network boot are affected, resulting in an availability impact.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17028
Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition undergoing iSCSI SAN network boot can prevent that partition from completing its boot…
🚨 CVE-2026-17091
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call to inject an arbitrary amount of data into hypervisor or partition memory, resulting in either a crash causing a full platform re-IPL and terminating all hosted partitions, or corruption of hypervisor or partition memory. The PowerVM hypervisor will restart automatically; however, repeated exploitation could result in a sustained availability impact. Successful exploitation results in an integrity and availability impact to the managed system.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call to inject an arbitrary amount of data into hypervisor or partition memory, resulting in either a crash causing a full platform re-IPL and terminating all hosted partitions, or corruption of hypervisor or partition memory. The PowerVM hypervisor will restart automatically; however, repeated exploitation could result in a sustained availability impact. Successful exploitation results in an integrity and availability impact to the managed system.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17091
Power Systems Firmware is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call to inject an arbitrary amount of data into hypervisor or partition…
🚨 CVE-2026-17097
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive, requiring a full platform re-IPL to restore normal operation. In some cases this may also cause the guest to inject a small amount of data into hypervisor or partition memory with no attacker control over the target location. Successful exploitation results in an integrity and availability impact to the managed system.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive, requiring a full platform re-IPL to restore normal operation. In some cases this may also cause the guest to inject a small amount of data into hypervisor or partition memory with no attacker control over the target location. Successful exploitation results in an integrity and availability impact to the managed system.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17097
Power Systems Firmware is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive…
🚨 CVE-2026-17414
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition performing a network boot can prevent that partition from completing its boot sequence. On partitions where OS secure boot is not enabled, which is the default configuration, the attacker can also substitute the boot image, compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition performing a network boot can prevent that partition from completing its boot sequence. On partitions where OS secure boot is not enabled, which is the default configuration, the attacker can also substitute the boot image, compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-17414
Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition performing a network boot can prevent that partition from completing its boot sequence.…
🚨 CVE-2026-18821
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker on the same network as a partition undergoing network boot can send a malformed packet, allowing arbitrary code to be executed in the partition firmware and compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker on the same network as a partition undergoing network boot can send a malformed packet, allowing arbitrary code to be executed in the partition firmware and compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-18821
Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker on the same network as a partition undergoing network boot can send a malformed packet, allowing arbitrary code to be executed in…
🚨 CVE-2026-18871
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in host firmware configuration parsing. An attacker with authenticated service-level access to the service processor can write specially crafted configuration data, causing the host firmware boot stack to crash with possible memory corruption during system initialisation, resulting in an integrity and availability impact to the managed system.
🎖@cveNotify
IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in host firmware configuration parsing. An attacker with authenticated service-level access to the service processor can write specially crafted configuration data, causing the host firmware boot stack to crash with possible memory corruption during system initialisation, resulting in an integrity and availability impact to the managed system.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-18871
Power Systems Firmware is affected by a vulnerability in host firmware configuration parsing. An attacker with authenticated service-level access to the service processor can write specially crafted configuration data, causing the host firmware boot stack…
🚨 CVE-2026-4936
IBM PowerVM Hypervisor Platform KeyStore (PKS) and virtual TPM FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 use persistent storage key seeds that result in an AES key with reduced strength. An attacker with access to the service processor or HMC could exploit this weakness to derive the encryption key and access the data.
🎖@cveNotify
IBM PowerVM Hypervisor Platform KeyStore (PKS) and virtual TPM FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 use persistent storage key seeds that result in an AES key with reduced strength. An attacker with access to the service processor or HMC could exploit this weakness to derive the encryption key and access the data.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-4936
PowerVM Platform KeyStore (PKS) and virtual TPM use persistent storage key seeds that result in an AES key with reduced strength. An attacker with access to the service processor or HMC could exploit this weakness to derive the encryption key and access the…
🚨 CVE-2026-4937
IBM PowerVM Hypervisor FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 could allow a local attacker with administrative privileges to decrypt encrypted data due to certain hypervisor calls utilizing less entropy than requested.
🎖@cveNotify
IBM PowerVM Hypervisor FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 could allow a local attacker with administrative privileges to decrypt encrypted data due to certain hypervisor calls utilizing less entropy than requested.
🎖@cveNotify
Ibm
Security Bulletin: This Power System update is being released to address CVE-2026-4937
PowerVM could allow a local attacker with administrative privileges to decrypt encrypted data due to certain hypervisor calls utilizing less entropy than requested.
🚨 CVE-2026-19449
IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 has a vulnerability in cmdnim that may allow an unprivileged local user to executes the payload as root.
🎖@cveNotify
IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 has a vulnerability in cmdnim that may allow an unprivileged local user to executes the payload as root.
🎖@cveNotify
Ibm
Security Bulletin: Vulnerabilities in IBM AIX and PowerVM VIOS
Updated Aug 21, 2026: Updated the summary to highlight the additional installation instructions. IBM is providing security updates for supported AIX and VIOS releases that are under active fix support. Delivered through Service Packs (SPs) and Fix Packs (FPs)…
🚨 CVE-2026-6844
A flaw was found in the `readelf` utility of the binutils package. A local attacker could exploit two Denial of Service (DoS) vulnerabilities by providing a specially crafted Executable and Linkable Format (ELF) file. One vulnerability, a resource exhaustion (CWE-400), can lead to an out-of-memory condition. The other, a null pointer dereference (CWE-476), can cause a segmentation fault. Both issues can result in the `readelf` utility becoming unresponsive or crashing, leading to a denial of service.
🎖@cveNotify
A flaw was found in the `readelf` utility of the binutils package. A local attacker could exploit two Denial of Service (DoS) vulnerabilities by providing a specially crafted Executable and Linkable Format (ELF) file. One vulnerability, a resource exhaustion (CWE-400), can lead to an out-of-memory condition. The other, a null pointer dereference (CWE-476), can cause a segmentation fault. Both issues can result in the `readelf` utility becoming unresponsive or crashing, leading to a denial of service.
🎖@cveNotify
Redhat
CVE-2026-6844 - Red Hat Customer Portal
CVE Details App
🚨 CVE-2026-16313
A flaw was found in sg3_utils. The sg_inq command, when invoked with the --export option, outputs device identification data without sanitizing control characters in SCSI name string fields. A newline character embedded in a device-supplied name string can inject arbitrary properties into the udev device database. This could allow an attacker who can present a crafted SCSI device to execute arbitrary commands as root when the device is disconnected.
🎖@cveNotify
A flaw was found in sg3_utils. The sg_inq command, when invoked with the --export option, outputs device identification data without sanitizing control characters in SCSI name string fields. A newline character embedded in a device-supplied name string can inject arbitrary properties into the udev device database. This could allow an attacker who can present a crafted SCSI device to execute arbitrary commands as root when the device is disconnected.
🎖@cveNotify
🚨 CVE-2026-12339
A Zip Slip vulnerability in the WebUI ISP
Upgrade functionality allows arbitrary file write via a crafted archive
containing directory traversal sequences. An authenticated administrator may
overwrite arbitrary files on the system.Successful
exploitation may allow arbitrary file to overwrite on the underlying system, affecting system integrity and availability.
🎖@cveNotify
A Zip Slip vulnerability in the WebUI ISP
Upgrade functionality allows arbitrary file write via a crafted archive
containing directory traversal sequences. An authenticated administrator may
overwrite arbitrary files on the system.Successful
exploitation may allow arbitrary file to overwrite on the underlying system, affecting system integrity and availability.
🎖@cveNotify
TP-Link
Download for Archer MR200 | TP-Link
TP Link - Download Center Detail
🚨 CVE-2026-59130
No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally.
🎖@cveNotify
No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally.
🎖@cveNotify
🚨 CVE-2026-59131
No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally.
🎖@cveNotify
No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally.
🎖@cveNotify
🚨 CVE-2026-73268
A flaw was found in the cluster-curator-controller component of multicluster engine (MCE). A tenant with create or update permissions on ClusterCurator resources can inject an arbitrary Job specification. This is possible because the CreateJob() function does not validate user-controlled input when unmarshaling the spec.install.overrideJob raw extension. Successful exploitation allows the injected Job to run with the controller's elevated privileges, leading to arbitrary code execution and privilege escalation, potentially accessing cluster-wide secrets.
🎖@cveNotify
A flaw was found in the cluster-curator-controller component of multicluster engine (MCE). A tenant with create or update permissions on ClusterCurator resources can inject an arbitrary Job specification. This is possible because the CreateJob() function does not validate user-controlled input when unmarshaling the spec.install.overrideJob raw extension. Successful exploitation allows the injected Job to run with the controller's elevated privileges, leading to arbitrary code execution and privilege escalation, potentially accessing cluster-wide secrets.
🎖@cveNotify
🚨 CVE-2026-73269
A flaw was found in the cluster-curator-controller component. A local user, by creating a ClusterCurator resource with a specific naming convention, can trigger the creation of a cluster-scoped ClusterRoleBinding. This allows the user to escalate their privileges from namespace-local access to cluster-wide control. This privilege escalation grants broad permissions, including the ability to access and manipulate secrets, manage cluster actions, and delete hosted clusters or node pools.
🎖@cveNotify
A flaw was found in the cluster-curator-controller component. A local user, by creating a ClusterCurator resource with a specific naming convention, can trigger the creation of a cluster-scoped ClusterRoleBinding. This allows the user to escalate their privileges from namespace-local access to cluster-wide control. This privilege escalation grants broad permissions, including the ability to access and manipulate secrets, manage cluster actions, and delete hosted clusters or node pools.
🎖@cveNotify